Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple time stepping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

STRIDES: automated uniform models for 30 quadruply imaged quasars

ABSTRACT Gravitational time delays provide a powerful one-step measurement of H0, independent of all other probes. One key ingredient in time-delay cosmography are high-accuracy lens models. Those are currently expensive to obtain, both, in terms of computing and investigator time (105–106 CPU hours and ∼0.5–1 yr, respectively). Major improvements in modelling speed are therefore necessary to exploit the large number of lenses that are forecast to be discovered over the current decade. In order to bypass this roadblock, we develop an automated modelling pipeline and apply it to a sample of 31 lens systems, observed by the Hubble Space Telescope in multiple bands. Our automated pipeline can derive models for 30/31 lenses with few hours of human time and <100 CPU hours of computing time for a typical system. For each lens, we provide measurements of key parameters and predictions of magnification as well as time delays for the multiple images. We characterize the cosmography-readiness of our models using the stability of differences in the Fermat potential (proportional to time delay) with respect to modelling choices. We find that for 10/30 lenses, our models are cosmography or nearly cosmography grade (<3 per cent and 3–5 per cent variations). For 6/30 lenses, the models are close to cosmography grade (5–10 per cent). These results utilize informative priors and will need to be confirmed by further analysis. However, they are also likely to improve by extending the pipeline modelling sequence and options. In conclusion, we show that uniform cosmography grade modelling of large strong lens samples is within reach.

79 ASTRONOMY AND ASTROPHYSICS↗

Climate Science for a Sustainable Energy Future Atmospheric Radiation Measurement Best Estimate (CSSEFARMBE)

The Climate Science for a Sustainable Energy Future (CSSEF) project is working to improve the representation of the hydrological cycle in global climate models, critical information necessary for decision-makers to respond appropriately to predictions of future climate. In order to accomplish this objective, CSSEF is building testbeds to implement uncertainty quantification (UQ) techniques to objectively calibrate and diagnose climate model parameterizations and predictions with respect to local, process-scale observations. In order to quantify the agreement between models and observations accurately, uncertainty estimates on these observations are needed. The DOE Atmospheric Radiation Measurement (ARM) program takes atmospheric and climate related measurements at three permanent locations worldwide. The ARM VAP called the ARM Best Estimate (ARMBE) [Xie et al., 2010] collects a subset of ARM observations, performs quality control checks, averages them to one hour temporal resolution, and puts them in a standard format for ease of use by climate modelers. ARMBE has been widely used by the climate modeling community as a summary product of many of the ARM observations. However, the ARMBE product does not include uncertainty estimates on the data values. Thus, to meet the objectives of the CSSEF project and enable better use of this data with UQ techniques, we created the CSSEFARMBE data set. Only a subset of the variables contained in ARMBE is included in CSSEFARMBE. Currently only surface meteorological observations are included, though this may be expanded to include other variables in the future. The CSSEFARMBE VAP is produced for all extended facilities at the ARM Southern Great Plains (SGP) site that contain surface meteorological equipment. This extension of the ARMBE data set to multiple facilities at SGP allows for better comparison between model grid boxes and the ARM point observations. In the future, CSSEFARMBE may also be created for other ARM sites. As each site has slightly different instrumentation, this will require additional development to understand the uncertainty characterization associated with instrumentation at those sites. The uncertainty assignment process is implemented into the ARM program’s new Integrated Software Development Environment (ISDE) so that many of the key steps can be used in the future to screen data based on ARM Data Quality Reports (DQRs), propagate uncertainties when transforming data from one time scale into another, and convert names and units into NetCDF Climate and Forecast (CF) standards. These processes are described in more detail in the following sections.

atmospheric↗

Surface elevation, snow depth, vegetation height, and color imagery from multiple UAV surveys from 2018 to 2023 across a watershed near Teller road mile marker 27, Seward Peninsula, Alaska

Multiple photogrammetric surveys using an unoccupied aerial system (UAS) were performed across a watershed along Teller road on the Seward Peninsula (Alaska) to investigate terrain, vegetation and snowpack properties. This work was led by the environmental geophysics team from Lawrence Berkeley National Laboratory as part of the Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic). The multiple photogrammetric surveys used mostly a DJI Matrice 210 UAS with a DJI X5S camera, Ground Control Points (GCPs) surveyed with a Real Time Kinematic (RTK)-GPS, and a structure from motion (SfM) technique for photogrammetric reconstruction. Digital Surface elevation Models (DSMs) were inferred at various times of year, including near peak in plant and leaf density (July 19 2017), close to peak in snow depth (April 1 2019 and April 11 2022), and at low plant and leaf density of tall after the first bare-ground date (June 9 2019). Snow and canopy height were obtained by subtracting DSMs from a Digital Terrain Model (DTM) proxy inferred from the June 9 2019 survey. The derived products include ortho-mosaiced RGB map, DSMs, a DTM proxy, snow depth (April 2019 and 2022) and canopy height (July 2017). Unprocessed and processed data products are included in this package (processing levels 0-2). Data and metadata are provided as text (*.csv), image (*.jpg), and GeoTiff (*.tif) formats. This metadata document contains a description of the survey and processing steps and the inferred products.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic) was a 15-year research effort (2012-2027) to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy’s Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy’s Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Measurement and analysis of release isentropes using proton radiography (u)

Off-Hugoniot measurements are needed to further develop predictive models that accurately describe the behavior of metals undergoing phase transitions. Predictive modeling of phase transitions is essential for LANL to meet its programmatic objectives. Understanding the dynamic evolution of density as a function of time during the release process is important to developing high fidelity equation of state models. This is particularly true for metals that have a degree of complexity, such as a solid-solid phase transition. The equations-of-state (EOS) for metals with complexity are more difficult to measure and to model, and states far away from where measurements are easily made can be poorly known. Accurate density measurements can provide us with additional fundamental information that can be used to further constrain the equation of state for a material. Currently release isentrope information is obtained from shock experiments at a sample window interface using optical velocimetry. This data is highly convoluted due to wave interactions between the sample window-interface making it difficult to infer physical processes happening within the material. Proton radiography has the ability to probe the release waves in-situ before these wave interactions can take place. Since multiple radiographs are obtained in each experiment, pRad provides the unique capability of being able to measure both density and wave evolution within the material. The measurement of release wave densities, however, presents new challenges for pRad since the release wave of a shocked transition is not a step function but instead a ramped wave. Previous pRad experiments have generally measured density jumps over step transitions; therefore, new analysis techniques will have to be developed to measure the ramped density change of a release isentrope. Once developed, these new analysis techniques can also be used for experiments that involve ramped compression. This kind of compression is being used to measure states close to an isentrope. The ability analyze ramp wave data is an essential component to further the use of proton radiography to study any off-Hugoniot behavior. Wave speeds in materials depend upon the speed of sound which in turn is a function of pressure in the material. At higher pressures the sound speed is faster; at lower pressures the sound speed is slower; this is what causes shock waves to form. This same effect causes the shape of release waves to change with time. The wave will be running faster at the top and slower at the bottom, its slope steeper at the top and less at the bottom due to pressure changes. These are unsteady waves. WONDY simulations of these wave shape characteristics are shown in Fig. 1 for a Cu symmetric impact. We will need to look at how the shape of the wave changes over time and affects the measurement of the density as a function of time. Additionally we need to quantify the uncertainties in the spatial and density measurements as a function of ramp rate and shock strength. We will look at aluminum or copper to validate the analysis techniques that will need to be developed. Finally, we will perform shock loaded phase transition experiments on iron, zirconium, and tin using the developed analysis techniques for incorporation into predictive models. The iron (and possibly tin) experiments will introduce a new degree of complexity because of the existence of a rarefaction shock in the release wave.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Efficient coupling of dynamic electro-optical and heat-transport models for high-power broad-area semiconductor lasers

In this work, we discuss the modeling of edge-emitting high-power broad-area semiconductor lasers. We demonstrate an efficient iterative coupling of a slow heat transport (HT) model defined on multiple vertical–lateral laser cross-sections with a fast dynamic electro-optical (EO) model determined on the longitudinal–lateral domain that is a projection of the device to the active region of the laser. Whereas the HT-solver calculates temperature and thermally-induced refractive index changes, the EO-solver exploits these distributions and provides time-averaged field intensities, quasi-Fermi potentials, and carrier densities. All these time-averaged distributions are used repetitively by the HT-solver for the generation of the heat sources entering the HT problem solved in the next iteration step.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancing e-waste estimates: Improving data quality by multivariate Input–Output Analysis

Highlights: • A multivariate Input–Output Analysis method for e-waste estimates is proposed. • Applying multivariate analysis to consolidate data can enhance e-waste estimates. • We examine the influence of model selection and data quality on e-waste estimates. • Datasets of all e-waste related variables in a Dutch case study have been provided. • Accurate modeling of time-variant lifespan distributions is critical for estimate. - Abstract: Waste electrical and electronic equipment (or e-waste) is one of the fastest growing waste streams, which encompasses a wide and increasing spectrum of products. Accurate estimation of e-waste generation is difficult, mainly due to lack of high quality data referred to market and socio-economic dynamics. This paper addresses how to enhance e-waste estimates by providing techniques to increase data quality. An advanced, flexible and multivariate Input–Output Analysis (IOA) method is proposed. It links all three pillars in IOA (product sales, stock and lifespan profiles) to construct mathematical relationships between various data points. By applying this method, the data consolidation steps can generate more accurate time-series datasets from available data pool. This can consequently increase the reliability of e-waste estimates compared to the approach without data processing. A case study in the Netherlands is used to apply the advanced IOA model. As a result, for the first time ever, complete datasets of all three variables for estimating all types of e-waste have been obtained. The result of this study also demonstrates significant disparity between various estimation models, arising from the use of data under different conditions. It shows the importance of applying multivariate approach and multiple sources to improve data quality for modelling, specifically using appropriate time-varying lifespan parameters. Following the case study, a roadmap with a procedural guideline is provided to enhance e-waste estimation studies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Common Analysis Tool Being Developed for Aeropropulsion: The National Cycle Program Within the Numerical Propulsion System Simulation Environment

The NASA Lewis Research Center is developing an environment for analyzing and designing aircraft engines-the Numerical Propulsion System Simulation (NPSS). NPSS will integrate multiple disciplines, such as aerodynamics, structure, and heat transfer, and will make use of numerical "zooming" on component codes. Zooming is the coupling of analyses at various levels of detail. NPSS uses the latest computing and communication technologies to capture complex physical processes in a timely, cost-effective manner. The vision of NPSS is to create a "numerical test cell" enabling full engine simulations overnight on cost-effective computing platforms. Through the NASA/Industry Cooperative Effort agreement, NASA Lewis and industry partners are developing a new engine simulation called the National Cycle Program (NCP). NCP, which is the first step toward NPSS and is its initial framework, supports the aerothermodynamic system simulation process for the full life cycle of an engine. U.S. aircraft and airframe companies recognize NCP as the future industry standard common analysis tool for aeropropulsion system modeling. The estimated potential payoff for NCP is a $50 million/yr savings to industry through improved engineering productivity.

Follen, Gregory J.↗

Computer model for electrochemical cell performance loss over time in terms of capacity, power, and conductance (CPC)

Available capacity, power, and cell conductance figure centrally into performance characterization of electrochemical cells (such as Li-ion cells) over their service life. For example, capacity loss in Li-ion cells is due to a combination of mechanisms, including loss of free available lithium, loss of active host sites, shifts in the potential-capacity curve, etc. Further distinctions can be made regarding irreversible and reversible capacity loss mechanisms. There are tandem needs for accurate interpretation of capacity at characterization conditions (cycling rate, temperature, etc.) and for robust self-consistent modeling techniques that can be used for diagnostic analysis of cell data as well as forecasting of future performance. Analogous issues exist for aging effects on cell conductance and available power. To address these needs, a modeling capability was developed that provides a systematic analysis of the contributing factors to battery performance loss over aging and to act as a regression/prediction platform for cell performance. The modeling basis is a summation of self-consistent chemical kinetics rate expressions, which as individual expressions each covers a distinct mechanism (e.g., loss of active host sites, lithium loss), but collectively account for the net loss of premier metrics (e.g., capacity) over time for a particular characterization condition. Specifically, sigmoid-based rate expressions are utilized to describe each contribution to performance loss. Through additional mathematical development another tier of expressions is derived and used to perform differential analyses and segregate irreversible versus reversible contributions, as well as to determine concentration profiles over cell aging for affected Li+ ion inventory and fraction of active sites that remain at each time step. Reversible fade components are surmised by comparing fade rates at fast versus slow cycling conditions. The model is easily utilized for predictive calculations so that future capacity performance can be estimated. The invention covers mathematical and theoretical frameworks, and demonstrates application to various Li-ion cells covering test periods that vary in duration, and shows model predictions well past the end of test periods. Version 2.0 Enhancements: the code now covers path-dependent aging scenarios, wherein the framework allows for arbitrarily-chosen aging conditions over a timeline to accommodate prediction of battery aging over a multiplicity of changing conditions. The code framework also allows for cell conductance and power loss evaluations over cell aging, analysis of series strings that contain a thermal anomaly (hot spot), and evaluation of battery thermal management parameters that impact battery lifetimes. Lastly, a comprehensive GUI now resides in the Ver. 2.0 code.

Gering, KevinL.↗

High-throughput, one-step screening, cloning and expression based on the lethality of DpnI in Escherichia coli

Highlights: • The extreme toxicity of the DpnI from Streptococcus pneumoniae in bacteria containing Gm6ATC, the product of Dam methylation. • One-step screening, cloning and expression based on the lethality of DpnI in Escherichia coli. • The efficiency of using this method for cloning was approximately 100%. • Rapid one-step selection of soluble proteins. The manipulation of recombinant DNA has been an integral step in molecular biology to date. A number of strategies have been developed over the years, as traditional cloning methods are time consuming, have high backgrounds and low efficiency and are often limited by the number of suitable restriction sites available. Here, we constructed a series of new positive-selection-based cloning vectors that overcome most of the above mentioned drawbacks and can be applied in both eukaryotic and prokaryotic systems. This strategy is based on the extreme toxicity of DpnI in wild-type E. coli and the inactivation of this lethality by the introduction of target gene within multiple cloning sites. There are no rapid approaches for identifying soluble proteins for high-throughput screening. In this study, we combined this highly efficient cloning strategy with rapid identification of soluble proteins to construct vectors with multiple fusion tags, such as MBP, GST, CBD, NusA, and Sumo, to generate enzymes with potential diagnostic, industrial or therapeutic applications. Thus, this versatile positive-selection-based technology is appropriate for routine cloning, DNA library construction, and high-throughput screening for the expression of proteins of interest.

60 APPLIED LIFE SCIENCES↗

Development of an Ion Mobility Spectrometry-Orbitrap Mass Spectrometer Platform

Complex samples benefit from multidimensional measurements where higher resolution enables more complete characterization of biological and environmental systems. To address this challenge, we developed a drift tube-based ion mobility spectrometry-Orbitrap mass spectrometer (IMS-Orbitrap MS) platform. To circumvent the time scale disparity between the fast IMS separation and the much slower Orbitrap MS acquisition, we utilized a dual gate and pseudorandom sequences to multiplexed injection of ions and allowing operation in signal averaging (SA), single multiplexing (SM) and double multiplexing (DM) IMS modes to optimize the signal-to-noise ratio of the measurements. For the SM measurements, a previously developed algorithm was used to reconstruct the IMS data. A new algorithm was developed for the DM analyses involving a two-step process that first recovers the SM data and then decodes the SM data. The algorithm also performs multiple refining procedures in order to minimize demultiplexing artifacts. The new IMS-Orbitrap MS platform was demonstrated by the analysis of proteomic and petroleum samples, where the integration of IMS and high mass resolution proved essential for accurate assignment of molecular formulae.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SU-E-T-187: Feasibility Study of Stereotactic Liver Radiation Therapy Using Multiple Divided Partial Arcs in Volumetric Modulated Arc Therapy

Purpose: To verify volumetric modulated arc therapy (VMAT) using flattening filter free (FFF) mode with jaw tracking (JT) feature for single breath hold as long as 15 s per arc in liver stereotactic body radiation therapy (SBRT) against intensity modulated radiation therapy (IMRT) FFF-JT. Methods: Ten hepatocellular carcinoma (HCC) cases were planned with 10 MV FFF using Pinnacle3 treatment planning system which delivered by TrueBeam to administer 48 Gy/ 4 fractions. Eight non-coplanar beams were assigned to IMRT using step-and-shoot technique. For VMAT, two or three non-coplanar partial arcs (up to 180 degrees) were further divided into subarcs with gantry rotation less than 80 degrees to limit delivery time within 15 s. Dose distributions were verified using OCTAVIUS II system and pass rates were evaluated using gamma analysis with criteria of 3%/3 mm at threshold of 5% to the maximum dose. The actual irradiation time was measured. Results: The VMAT-FFF-JT of partial-arcs with sub-divided arcs was able to produce a highly conformal plan as well as IMRT-FFF-JT. Isodose lines and DVH showed slight improvement in dosimetry when JT was employed for both IMRT and VMAT. Consequently, VMAT-FFF-JT was superior in reducing the dose to liver minus gross tumor volume. VMAT-FFF-JT has shorter total treatment time compared with 3D conformal radiation therapy (3D-CRT) FFF because the gantry was rotated simultaneously with the beam delivery in VMAT. Moreover, due to the small and regular shape of HCC, VMAT-FFF-JT offered less multileaf collimator motion, thus the interplay effect is expected to be reduced. The patient specific QA of IMRT and VMAT acquired the pass rates higher than 90%. Conclusion: VMAT-FFF-JT could be a promising technique for liver SBRT as the sub-divided arcs method was able to accommodate a single breath hold irradiation time of less than 15 s without deterioration of the dose distribution compared with IMRT-FFF-JT.

60 APPLIED LIFE SCIENCES↗

Extending substructure based iterative solvers to multiple load and repeated analyses

Direct solvers currently dominate commercial finite element structural software, but do not scale well in the fine granularity regime targeted by emerging parallel processors. Substructure based iterative solvers--often called also domain decomposition algorithms--lend themselves better to parallel processing, but must overcome several obstacles before earning their place in general purpose structural analysis programs. One such obstacle is the solution of systems with many or repeated right hand sides. Such systems arise, for example, in multiple load static analyses and in implicit linear dynamics computations. Direct solvers are well-suited for these problems because after the system matrix has been factored, the multiple or repeated solutions can be obtained through relatively inexpensive forward and backward substitutions. On the other hand, iterative solvers in general are ill-suited for these problems because they often must restart from scratch for every different right hand side. In this paper, we present a methodology for extending the range of applications of domain decomposition methods to problems with multiple or repeated right hand sides. Basically, we formulate the overall problem as a series of minimization problems over K-orthogonal and supplementary subspaces, and tailor the preconditioned conjugate gradient algorithm to solve them efficiently. The resulting solution method is scalable, whereas direct factorization schemes and forward and backward substitution algorithms are not. We illustrate the proposed methodology with the solution of static and dynamic structural problems, and highlight its potential to outperform forward and backward substitutions on parallel computers. As an example, we show that for a linear structural dynamics problem with 11640 degrees of freedom, every time-step beyond time-step 15 is solved in a single iteration and consumes 1.0 second on a 32 processor iPSC-860 system; for the same problem and the same parallel processor, a pair of forward/backward substitutions at each step consumes 15.0 seconds.

Farhat, Charbel↗

Operando Structure Determination of Cu and Zn on Supported MgO/SiO 2 Catalysts during Ethanol Conversion to 1,3-Butadiene

Electronic structure and reactivity of Cu- and Zn-promoted wet kneaded MgO/SiO 2 catalysts was interrogated during ethanol reaction to 1,3-BD. A multimodal nature of characterization, including in situ or operando X-ray, electron, light spectroscopies and steady state reactivity measurements demonstrated critical new information on the temporal evolution of the catalyst active sites including key measurements performed operando using synchrotron source (EXAFS and XANES). In situ DRIFT spectroscopy allowed to decouple the aldol condensation and dehydrogenation reactive steps due to the promotion with enhanced ability to carry out aldol condensation, as correlated with the steady state reactivity experiments . In situ UV-Vis spectroscopy presented a complex picture of the adsorbates with π- π* electronic transitions due to the allylic cations, cyclic or aromatic species while also suggesting oligomeric CuO species were formed. Operando X-ray measurements combined with ab initio multiple scattering modelling performed as a function of temperature identified a new transient intermediate assigned to a 4-fold coordinate Cu species that was key leading to increase in Cu-Cu pair number. For the first time, two types of Zn pairs, namely Zn-O and Zn-Mg, were identified during X-ray analysis under operating conditions. With Zn nearly 6-coordinated when in the vicinity of Mg while Zn-O species coordinated to nearly 4 nearest neighbors. The data suggest that such supported catalyst deactivation might proceed not only via carbon coking mechanism but also through the dispersed Cu site diffusion and growth due to the nearest neighbor oxygen atoms loss. The results presented suggest intermediates for segregation/deactivation mechanisms for a broader set of supported Cu and Zn catalysts used for alcohol upgrading catalytic reactions.

1,3-butadiene↗

QUASAR OPTICAL VARIABILITY IN THE PALOMAR-QUEST SURVEY

The ensemble variability properties of nearly 23,000 quasars are studied using the Palomar-QUEST Survey. The survey has covered 15,000 deg{sup 2} multiple times over 3.5 years using seven optical filters, and has been calibrated specifically for variability work. Palomar-QUEST allows for the study of rare objects using multiple epochs of consistently calibrated, homogeneous data, obviating the common problem of generating comparable measurements from disparate data sets. A power-law fit to the quasar structure function versus time yields an index of 0.432 {+-} 0.024 for our best measured sample. We see the commonly reported anticorrelation between average optical variability amplitude and optical luminosity, and measure the logarithmic decrease in variability amplitude to scale as the logarithm of the luminosity times 0.205 {+-} 0.002. Black hole mass is positively correlated with variability amplitude over three orders of magnitude in mass. Quasar variability amplitude is seen to decrease with Eddington ratio as a step function with a transition around Eddington ratio of 0.5. The higher variability at low Eddington ratios is due to excess power at timescales shorter than roughly 300 days. X-ray and radio measurements exist for subsets of the quasar sample. We observe an anticorrelation between optical variability amplitude and X-ray luminosity. No significant correlation is seen between average optical variability properties and radio luminosity. The timescales of quasar fluctuations are suggestive of accretion disk instabilities. The relationships seen between variability, Eddington ratio, and radio and X-ray emission are discussed in terms of a possible link between the behavior of quasars and black hole X-ray binaries.

79 ASTRONOMY AND ASTROPHYSICS↗

OBSERVING EVOLUTION IN THE SUPERGRANULAR NETWORK LENGTH SCALE DURING PERIODS OF LOW SOLAR ACTIVITY

We present the initial results of an observational study into the variation of the dominant length scale of quiet solar emission: supergranulation. The distribution of magnetic elements in the lanes that from the network affects, and reflects, the radiative energy in the plasma of the upper solar chromosphere and transition region at the magnetic network boundaries forming as a result of the relentless interaction of magnetic fields and convective motions of the Suns' interior. We demonstrate that a net difference of {approx}0.5 Mm in the supergranular emission length scale occurs when comparing observation cycle 22/23 and cycle 23/24 minima. This variation in scale is reproduced in the data sets of multiple space- and ground-based instruments and using different diagnostic measures. By means of extension, we consider the variation of the supergranular length scale over multiple solar minima by analyzing a subset of the Mount Wilson Solar Observatory Ca II K image record. The observations and analysis presented provide a tantalizing look at solar activity in the absence of large-scale flux emergence, offering insight into times of 'extreme' solar minimum and general behavior such as the phasing and cross-dependence of different components of the spectral irradiance. Given that the modulation of the supergranular scale imprints itself in variations of the Suns' spectral irradiance, as well as in the mass and energy transport into the entire outer atmosphere, this preliminary investigation is an important step in understanding the impact of the quiet Sun on the heliospheric system.

79 ASTRONOMY AND ASTROPHYSICS↗

Ghent Generating Station Nuclear Study: Siting Evaluation

The purpose of this initial siting evaluation is to assess the suitability of the PPL Corporation (PPL) owned land at/near the Kentucky Utilities Ghent Generating Station (GGS) for the deployment of advanced nuclear reactors and to determine if there are any exclusionary or avoidance factors associated with siting nuclear power at GGS. The formal siting process for a nuclear reactor requires a great level of time (i.e., multiple years), effort, and detail. The Electric Power Research Institute (EPRI) estimates the formal siting process could take a dedicated team between one and three years to complete. This initial siting evaluation considers several characteristics (e.g., environmental conditions, seismic concerns, footprint, water use, etc.) and highlights favorable/preferred characteristics as well as potential risks to feasibility. Potential risks were explored in greater detail to provide PPL with additional insights to support decision planning. The results indicate the strengths and weaknesses associated with the GGS site as a location for a nuclear generating station and are intended to inform PPL’s next steps. The results of this initial siting evaluation will also inform the selection of candidate nuclear technologies for the GGS site that align with PPL’s mission and business objectives.

99 GENERAL AND MISCELLANEOUS↗

Rapid Corner Detection Using FPGAs

In order to perform precision landings for space missions, a control system must be accurate to within ten meters. Feature detection applied against images taken during descent and correlated against the provided base image is computationally expensive and requires tens of seconds of processing time to do just one image while the goal is to process multiple images per second. To solve this problem, this algorithm takes that processing load from the central processing unit (CPU) and gives it to a reconfigurable field programmable gate array (FPGA), which is able to compute data in parallel at very high clock speeds. The workload of the processor then becomes simpler; to read an image from a camera, it is transferred into the FPGA, and the results are read back from the FPGA. The Harris Corner Detector uses the determinant and trace to find a corner score, with each step of the computation occurring on independent clock cycles. Essentially, the image is converted into an x and y derivative map. Once three lines of pixel information have been queued up, valid pixel derivatives are clocked into the product and averaging phase of the pipeline. Each x and y derivative is squared against itself, as well as the product of the ix and iy derivative, and each value is stored in a WxN size buffer, where W represents the size of the integration window and N is the width of the image. In this particular case, a window size of 5 was chosen, and the image is 640 480. Over a WxN size window, an equidistance Gaussian is applied (to bring out the stronger corners), and then each value in the entire window is summed and stored. The required components of the equation are in place, and it is just a matter of taking the determinant and trace. It should be noted that the trace is being weighted by a constant k, a value that is found empirically to be within 0.04 to 0.15 (and in this implementation is 0.05). The constant k determines the number of corners available to be compared against a threshold sigma to mark a valid corner. After a fixed delay from when the first pixel is clocked in (to fill the pipeline), a score is achieved after each successive clock. This score corresponds with an (x,y) location within the image. If the score is higher than the predetermined threshold sigma, then a flag is set high and the location is recorded.

Morfopoulos, Arin C.↗

A terminology for scientific workflow systems

The term “scientific workflow” has evolved over the last two decades to encompass a broad range of compositions of interdependent compute tasks and data movements. It has also become an umbrella term for processing in modern scientific applications. Today, many scientific applications can be considered as workflows made of multiple dependent steps, and hundreds of workflow systems have been developed to manage and run these scientific workflows. However, no turnkey solution has emerged from the field to address the diversity of scientific processes and the infrastructure on which they are supposed to be implemented. Instead, new research problems requiring the execution of scientific workflows with some novel feature often lead to the development of an entirely new workflow system. A direct consequence of this situation is that many existing workflow management systems (WMSs) share some salient features, offer similar functionalities, and can manage the same categories of workflows but at the same time also have some distinct capabilities that can be important for specific applications. This situation makes researchers who develop workflows face the complex question of selecting a WMS. This selection can be driven by technical considerations, to find the system that is the most appropriate for their application and for the computing and storage resources available to them, or other factors such as reputation, adoption, strong community support, or long-term sustainability. To address this problem, a group of WMS developers and practitioners joined their efforts to produce a community-based terminology of WMSs. This paper summarizes their findings and introduces this new terminology to characterize WMSs. Furthermore, this terminology is composed of fives axes: workflow structure and characteristics, composition, orchestration, data management, and metadata capture. Each axis comprises several concepts that capture the prominent features of WMSs. Based on this terminology, this paper also presents a classification of 23 existing WMSs according to the proposed axes and terms.

Community-based terminology↗