Search NASA⌕ Search

SEARCH · Search NASA

Results for “performance study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Transient studies of capillary-induced flow

This paper presents the numerical and experimental results of a study performed on the transient rise of fluid in a capillary tube. The capillary tube problem provides an excellent mechanism from which to launch an investigation into the transient flow of a fluid in a porous wick structure where capillary forces must balance both adverse gravitational effects and frictional losses. For the study, a capillary tube, initially charged with a small volume of water, was lowered into a pool of water. The behavior of the column of fluid during the transient that followed as more water entered the tube from the pool was both numerically and experimentally studied.

Reagan, M. K.↗

Experimental Data Sets for CFD Calculations of Flow and Heat Transfer in Deformed Fuel Assemblies

Liquid-metal fast-breeder reactors (LMFBRs) have traditionally used fuel assemblies consisting of a hexagonal array of pins enclosed in a hexagonally shaped duct. Each fuel pin is surrounded by a wire that is wrapped in a helical configuration, which is used to separate the pins sufficiently to allow sodium coolant to flow through the assembly. The helical wire wrap also promotes mixing of the coolant. Experience with these assemblies has shown that they begin to deform with time during normal operation leading to significant changes in core thermal-hydraulics. For example, deformations of assemblies in the Experimental Breeder Reactor-2 and the Fast Flux Test Facility led to pin overheating resulting from pin-to-duct and pin-to-pin contact. This problem is well known and was investigated extensively in the 1970's and early 1980's. This was a period, however, before the development of modern Computational Fluid Dynamics (CFD) computer codes. Therefore, the experiments performed at the time did not record their results in sufficient detail to be useful for compiling validation datasets for CFD codes. Most of the experiments focused only on bulk measurements, such as the pressure drop across the bundle. When the effects of deformation of the fuel assembly were investigated, the studies performed to quantify these effects considered only bare pins without the wire wrap. With the resurgence of interest in LMFBRs in recent years, particularly in designs that leverage long-life performance of the fuel, the need has arisen for data that are suitable for the validation and benchmarking of CFD codes to predict the thermal-hydraulic behavior of flow in wire-wrapped fuel bundles. Such data must include high-resolution, transient, full-field measurements of the fluid velocity and temperature and an accurate record of the test conditions, including a precise description of the geometry. This paper describes a project to produce a validation-quality set of data that can be used to benchmark CFD codes for modeling flow and thermal performance in wire-wrapped fuel assemblies of the kind used by LMFBR designs. In addition, this effort investigates the changes to the flow and other phenomena that occur in the deformed geometries that can form later in a fuel assembly's life. This work is a joint effort of four organizations. The experimental work is being performed by AREVA and Texas A and M University. The computational work, both to support the experiments and to perform blind benchmark calculations, is being done by TerraPower, LLC, and Argonne National Laboratory (ANL). The experiments use a geometry that consists of a complete assembly of 61 wire-wrapped pins, which is surrounded by a hexagonal duct. This configuration is considered the minimum size necessary to adequately capture the important results of interest, such as the thermal gradients across the assembly and the velocity field effects in the assembly resulting from the surrounding duct. These types of effects cannot be captured by a geometry consisting of only a small group of fuel pins. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Helium bubble evolution in a Zr–Sn–Nb–Fe–Cr alloy during post-annealing: An in-situ investigation

The formation of helium bubbles is considered to be detrimental to the mechanical performance of the nuclear materials. The growth behaviors of helium bubbles in a helium ion implanted Zr–Sn–Nb–Fe–Cr alloy with respect to the helium fluence and subsequently annealing procedure were investigated by in-situ transmission electron microscopy. In the as-implanted sample, the measured size distributions of the helium bubbles are consistent with the simulated helium concentrations. Moreover, the mean size of the helium bubbles increases with the increase of the irradiation temperatures and the helium fluence. The in-situ heating study performed in a transmission electron microscope indicates that the mean size of the helium bubbles increase slowly below 923 K and dramatically above 923 K. The coarsening mechanism of the helium bubbles in the alloy is suggested based on the study. - Highlights: • Helium bubble growth in zirconium with annealing was in-situ investigated in TEM. • The mean helium bubble size increase with helium fluence and annealing temperature. • Helium bubble size distribution is same as that of helium concentration by SRIM. • Mean bubble size increases slowly and quickly with temperature below and above 923 K. • The growth mechanism of the helium bubbles in Zr alloy has been discussed.

36 MATERIALS SCIENCE↗

Overview of Small and Large-Scale Space Solar Power Concepts

An overview of space solar power studies performed at the Boeing Company under contract with NASA will be presented. The major concepts to be presented are: 1. Power Plug in Orbit: this is a spacecraft that collects solar energy and distributes it to users in space using directed radio frequency or optical energy. Our concept uses solar arrays having the same dimensions as ISS arrays, but are assumed to be more efficient. If radiofrequency wavelengths are used, it will necessitate that the receiving satellite be equipped with a rectifying antenna (rectenna). For optical wavelengths, the solar arrays on the receiving satellite will collect the power. 2. Mars Clipper I Power Explorer: this is a solar electric Mars transfer vehicle to support human missions. A near-term precursor could be a high-power radar mapping spacecraft with self-transport capability. Advanced solar electric power systems and electric propulsion technology constitute viable elements for conducting human Mars missions that are roughly comparable in performance to similar missions utilizing alternative high thrust systems, with the one exception being their inability to achieve short Earth-Mars trip times. 3. Alternative Architectures: this task involves investigating alternatives to the traditional solar power satellite (SPS) to supply commercial power from space for use on Earth. Four concepts were studied: two using photovoltaic power generation, and two using solar dynamic power generation, with microwave and laser power transmission alternatives considered for each. All four architectures use geostationary orbit. 4. Cryogenic Propellant Depot in Earth Orbit: this concept uses large solar arrays (producing perhaps 600 kW) to electrolyze water launched from Earth, liquefy the resulting hydrogen and oxygen gases, and store them until needed by spacecraft. 5. Beam-Powered Lunar Polar Rover: a lunar rover powered by a microwave or laser beam can explore permanently shadowed craters near the lunar poles to search for water ice and other frozen volatiles. Near such craters are mountain peaks and highlands that are in near permanent sunlight. Power can be beamed from a collector on a sunlit mountain or crater rim to a rover inside a crater. Near-term applications of space solar power technology can therefore pave the way toward large-scale commercial power from space.

Potter, Seth↗

Comparison between Computational and Experimental Wall-Shear Stress and Pressure Measurements in a Supersonic Wind Tunnel

We study the performance of two selected RANS models (SST-$k$-$\omega$ and Baldwin-Lomax) to simulate the mean wall-shear and pressure data obtained from a distributed-roughness-related experimental campaign conducted at Ahmic Aerospace, LLC, located in Ohio, US. A structured compressible Navier-Stokes in-house solver, DPLR, is used to conduct the RANS simulations. As the final objective is to perform the studies under high-enthalpy flow conditions, such as inside the AHF facility at NASA-Ames Research Center (ARC), the current investigation focuses on the low-enthalpy cases using Ahmic's high-Reynolds-number supersonic wind tunnel as the initial step to simplify the flow physics. Furthermore, the wind tunnel simulations are conducted with perfectly-smooth walls to further simplify the problem and perform the initial testing of different solver-based RANS models. The Baldwin-Lomax model is observed to be more accurate than the SST model. However, when these RANS models and their roughness augmentation models are utilized to study their accuracy with respect to the experimental datasets, where the roughness effects are activated, both models perform well for a low roughness height case. However, as the roughness height increases, the SST model more accurately predicts the wall data (shear and pressure) than the Baldwin-Lomax model. Therefore, this present work has built a solid foundation for selecting the best RANS model to study the wall data under high-enthalpy flow conditions at the AHF facility soon.

Prakash Shrestha↗

COMPARATIVE STUDY OF ASYMMETRY ORIGIN OF GALAXIES IN DIFFERENT ENVIRONMENTS. II. NEAR-INFRARED OBSERVATIONS

In this second paper of two analyses, we present near-infrared (NIR) morphological and asymmetry studies performed in a sample of 92 galaxies found in different density environments: galaxies in compact groups (CGs; HCGs in the Hickson Catalog of Compact Groups of Galaxies), isolated pairs of galaxies (KPGs in Karachentsev's list of isolated pairs of galaxies), and isolated galaxies (KIGs in Karachentseva's Catalog of Isolated Galaxies). Both studies have proved useful for identifying the effect of interactions on galaxies. In the NIR, the properties of the galaxies in HCGs, KPGs, and KIGs are more similar than they are in the optical. This is because the NIR band traces the older stellar populations, which formed earlier and are more relaxed than the younger populations. However, we found asymmetries related to interactions in both KPG and HCG samples. In HCGs, the fraction of asymmetric galaxies is even higher than what we found in the optical. In the KPGs the interactions look like very recent events, while in the HCGs galaxies are more morphologically evolved and show properties suggesting they suffered more frequent interactions. The key difference seems to be the absence of star formation in the HCGs; while interactions produce intense star formation in the KPGs, we do not see this effect in the HCGs. This is consistent with the dry merger hypothesis; the interaction between galaxies in CGs is happening without the presence of gas. If the gas was spent in stellar formation (to build the bulge of the numerous early-type galaxies), then the HCGs possibly started interacting sometime before the KPGs. On the other hand, the dry interaction condition in CGs suggests that the galaxies are on merging orbits, and consequently such system cannot be that much older either. Cosmologically speaking, the difference in formation time between pairs of galaxies and CGs may be relatively small. The two phenomena are typical of the formation of structures in low-density environments. Their formation represents relatively recent events.

79 ASTRONOMY AND ASTROPHYSICS↗

Turbomachinery Flows Modeled

Last year, researchers at the NASA Lewis Research Center used the average passage code APNASA to complete the largest three-dimensional simulation of a multistage axial flow compressor to date. Consisting of 29 blade rows, the configuration is typical of those found in aeroengines today. The simulation, which was executed on the High Performance Computing and Communications (HPCC) Program IBM SP2 parallel computer located at the NASA Ames Research Center, took nearly 90 hr to complete. Since the completion of this activity, a fine-grain, parallel version of APNASA has been written by a team of researchers from General Electric, NASA Lewis, and NYMA. Timing studies performed on the SP2 have shown that, with eight processors assigned to each blade row, the simulation time is reduced by a factor of six. For this configuration, the simulation time would be 15 hr. The reduction in computing time indicates that an overnight turnaround of a multistage configuration simulation is feasible. In addition, average passage forms of two-equation turbulence models were formulated. These models are currently being incorporated into APNASA.

Adamczyk, John J.↗

Sparse Bayesian Regression with Integrated Feature Selection for Nuclear Reactor Analysis

High-dimensional, nonlinear function estimation using large datasets is a current area of interest in the machine learning community, and applications may be found throughout the analytical sciences, where ever-growing datasets are making more information available to the analyst. In this paper, we leverage the existing relevance vector machine, a sparse Bayesian version of the well-studied support vector machine, and expand the method to include integrated feature selection and automatic function shaping. These innovations produce an algorithm that is able to distinguish variables that are useful for making predictions of a response from variables that are unrelated or confusing. We test the technology using synthetic data, conduct initial performance studies, and develop a model capable of making position-independent predictions of the coreaveraged burnup using a single specimen drawn randomly from a nuclear reactor core.

Dayman, Ken J↗

Four-Dimensional Dose Reconstruction for Scanned Proton Therapy Using Liver 4DCT-MRI

Purpose: Four-dimensional computed tomography-magnetic resonance imaging (4DCT-MRI) is an image-processing technique for simulating many 4DCT data sets from a static reference CT and motions extracted from 4DMRI studies performed using either volunteers or patients. In this work, different motion extraction approaches were tested using 6 liver cases, and a detailed comparison between 4DCT-MRI and 4DCT was performed. Methods and Materials: 4DCT-MRI has been generated using 2 approaches. The first approach used motion extracted from 4DMRI as being “most similar” to that of 4DCT from the same patient (subject-specific), and the second approach used the most similar motion obtained from a motion library derived from 4DMRI liver studies of 13 healthy volunteers (population-based). The resulting 4DCT-MRI and 4DCTs were compared using scanned proton 4D dose calculations (4DDC). Results: Dosimetric analysis showed that 93% ± 8% of points inside the clinical target volume (CTV) agreed between 4DCT and subject-specific 4DCT-MRI (gamma analysis: 3%/3 mm). The population-based approach however showed lower dosimetric agreement with only 79% ± 14% points in the CTV reaching the 3%/3 mm criteria. Conclusions: 4D CT-MRI extends the capabilities of motion modeling for dose calculations by accounting for realistic and variable motion patterns, which can be directly employed in clinical research studies. We have found that the subject-specific liver modeling appears more accurate than the population-based approach. The former is particularly interesting for clinical applications, such as improved target delineation and 4D dose reconstruction for patient-specific QA to allow for inter- and/or intra-fractional plan corrections.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Pressurized Water Reactor Gadolinia Pin Location Optimization

This report presents the results of lattice optimization studies performed to find optimum locations for gadolinia burnable absorber (BA) rods in pressurized water reactor (PWR) lattice fuel designs. Initial excess reactivity suppression allows core designers to further improve operational economics by extending cycle length. Gadolinia BAs are commonly used in boiling water reactor assembly designs for this purpose. In recent years, gadolinia absorbers have been used in PWR designs owing to their longer effectiveness for reactivity suppression compared with common BAs used in PWR assemblies. This report examines the optimum gadolinia pin placement in 17 × 17 PWR lattices at different fuel and gadolinia concentrations for optimized lattice performance, using the SCALE/Polaris lattice physics code. The completed work is continuation of the Light Water Reactor LEU+ Lattice Optimization (ORNL/TM-2021/2366) project. An optimization driver called the metaheuristic optimization tool (MOT) is used to automate domain space exploration and optimization of the lattice designs. Heuristics from previous light-water reactor (LWR) lattice optimization studies were used to construct the objective function and define the domain space for optimization. This work successfully demonstrated that the optimization algorithms of MOT can generate feasible, nonproprietary PWR lattice designs with gadolinia.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Results From The First Interactive Scientific Expert System In Space

We describe recent work on automation and support of science experiments on the Space Shuttle. PI-in-a-Box, the first interactive expert system for scientific support, was flown onboard STS-58 in October 1993. It was designed to help astronauts perform better science in space by providing expert-level advice in real-time. The system provides help with 'technician' tasks such as data acquisition, data quality monitoring, and diagnostic, troubleshooting and repair. The system also performs 'expert' reasoning on the scientific model and experiment steps scheduling. It can make scheduling recommendations based on hardware status, time available, and agreement between predictions and flight data. The system was successfully deployed and used throughout the mission. Most of the 'technician' skills of the system were used with success. The scientific model study performed correctly, but we believe the results were not exploited by the astronauts because of Spacelab operational pressures. Also, portions of the system were designed around rigid schedule constraints that were essentially relaxed during the mission. This version was tailored to a specific vestibular experiment known as the 'rotating dome'. We are currently expanding our effort in various scientific (other life and microgravity sciences experiments) and technological directions (integrated telescience, astronaut science advisor, and autonomous control).

Groleau, Nicolas↗

Results from the First Interactive Scientific Expert System in Space

We describe recent work on automation and support of science experiments on the Space Shuttle. PI-in-a-Box, the first interactive expert system for scientific support, was flown onboard STS-58 in October 1993. It was designed to help astronauts perform better science in space by providing expert-level advice in real-time. The system provides help with "technician" tasks such as data acquisition, data quality monitoring, and diagnostic, troubleshooting and repair. The system also performs "expert" reasoning on the scientific model and experiment steps scheduling. It can make scheduling recommendations based on hardware status, time available, and agreement between predictions and flight data. The system was successfully deployed and used throughout the mission. Most of the "technician" skills of the system were used with success. The scientific model study performed correctly, but we believe the results were not exploited by the astronauts because of Spacelab operational pressures. Also, portions of the system were designed around rigid schedule constraints that were essentially relaxed during the mission. This version was tailored to a specific vestibular experiment known as the "rotating dome". We are currently expanding our effort in various scientific (other life and microgravity sciences experiments) and technological directions (integrated telescience, astronaut science advisor, and autonomous control).

Groleau, Nicolas↗

Development of a Performance Portable Non-Equilibrium Plasma Fluid Solver on Adaptive Grids

This presentation will describe the numerical techniques, programming paradigms, verification, and performance of a non-equilibrium plasma fluid solver that can effectively utilize current and upcoming central processing and graphics processing unit (CPU+GPU) architectures. Our plasma fluid model solves the conservation equations for self-consistent electrostatic Poisson, electron and heavy species transport, and electron temperature on adaptive Cartesian grids. Our solver is written using performance portable adaptive mesh management library, AMReX (Zhang et al., JOSS, 4 (37) 1370, 2019), and can be built and run on widely available vendor specific GPU architectures (NVIDIA/AMD/Intel). We utilize a non-subcycled second order semi-implicit time-stepping method where all adaptive mesh refinement (AMR) levels are advanced with the same time step. The composite multi-level multigrid solver from within AMReX is used for each of the governing equations that are cast into a Helmholtz equation form. We have also developed a python based chemical mechanism parser framework that uses a similar format as CANTERA (Goodwin et al., Zenodo, 2018) yaml files as input. Our custom parser reads the yaml file and provides C++ files with transport and production rate functions that can be executed on both host (CPU) and device (GPU). We present verification of our solver using method of manufactured solutions that indicate formal second order accuracy with central diffusion and fifth order weighted-essentially-non-oscillatory (WENO) advection scheme. We also verify our solver with published literature on low-pressure capacitive and high-pressure streamer discharges. Our initial performance studies indicate 10X speed-up using 20 NVIDIA GPUs versus 200 CPUs for an atmospheric streamer discharge problem solved on a 512 x 1024 x 512 grid.

graphics processing units↗

ICME: The Design of Fit-for-Purpose Materials

With the increased emphasis on reducing the cost and time to market of new materials, ICME (Integrated Computational Materials Engineering) has become a fast growing discipline within materials science and engineering. The vision of ICME is compelling in many respects, not only for the value added in reducing time to market for new products with advanced, tailored materials, but also for enhanced efficiency and performance of these materials. Although the challenges and barriers (both technical and cultural) are formidable, substantial cost, schedule, and technical benefits can result from broad development, implementation, and validation of ICME principles. ICME is an integrated approach to the design of products, and the materials that comprise them, by linking material and structural models at multiple time and length scales. NASA’s Transformational Tools and Technology (TTT) Project sponsored a study (performed by a team led by Pratt & Whitney) in 2016 to define the potential 25-year future state required for integrated multiscale modeling of materials and systems (e.g., load-bearing structures) to accelerate the pace and reduce the expense of innovation in future aerospace and aeronautical systems. This talk will briefly review ICME, the findings of the 2040 Vision study, and discuss NASA’s TTT 2040 implementation activities: with special emphasis on recent accomplishments. The 2040 study, NASA CR 2018- 219771, envisions the development of a cyber-physical-social ecosystem comprised of experimentally verified and validated computational models, tools, and techniques, along with the associated digital tapestry, that impacts the entire supply chain to enable cost-effective, rapid, and revolutionary design of fit-for-purpose materials, components, and systems by enabling the engineer to not only “design-with-the” material but also concurrently “design-the” material.

multiscale analysis↗

Design of target irradiation and diagnostic chamber to study ps-laser generated plasma as a source of singly charged ions for external injection into an electron beam ion source

High repetition-rate (~10 kHz) ps-lasers are becoming available on the market with reasonable cost and may offer several advantages compared to ns-lasers by generating nearly continuous beams of singly charged ions appropriate for the “slow” injection mode into the Electron Beam Ion Source (EBIS). To evaluate these advantages, we will perform studies of a ps-laser generated plasma using a laser with a pulse duration of 8 ps and energy up to 5 mJ per pulse. A vacuum chamber equipped with a 3D target positioner, a focusing lens, and a Faraday Cup has been designed and built for this study. Lens-to-target distance variations have been measured using a laser tracker over the whole range of horizontal and vertical translation for all five targets we will use. The variations were found to be within ±150 µm. This level of “target flatness” should be acceptable for our experimental conditions. Ion currents and ion pulse durations of various elements (from Al to Ta) will be measured for different target irradiation conditions (focal spot size and laser pulse energy). The results obtained will allow us to specify all parameters and geometry of a laser ion source based on a ps-laser to provide external ion injection into the relativistic heavy ion collider EBIS

43 PARTICLE ACCELERATORS↗

Towards Misregistration-Tolerant Change Detection using Deep Learning Techniques with Object-Based Image Analysis

Co-registrating is a common pre-processing step for existing change detection algorithms, but registering bi-temporal images is nontrivial. The use of image patch as input for deep learning techniques provides a natural avenue to apply them in the OBIA framework, and have shown successful performance in the object-based land cover mapping and change detection applications. Even though attempts of applying deep learning techniques for change detection applications have been made with varying success, its application under OBIA framework for change detection have not been conducted and its tolerance for misregistration among temporal images are neither known. This study performed change detection under OBIA framework using deep learning techniques for the first time, and evaluated its performance regarding their tolerance of image misregistration on training and testing dataset. Our results demonstrate the proposed change detection scheme is surprisingly robust to image misregistration on the testing dataset, while classifiers trained with the training dataset containing image misregistration errors suffer from slight decrease of overall accuracy.

Liu, Tao↗

Accumulated SET protein up-regulates and interacts with hnRNPK, increasing its binding to nucleic acids, the Bcl-xS repression, and cellular proliferation

Highlights: • hnRNPK is a new target of SET. • SET regulates hnRNPK. • SET and hnRNPK accumulation promotes tumorigenesis. • SET accumulation is a potential model to study genes regulated by SET-hnRNPK. - Abstract: SET and hnRNPK are proteins involved in gene expression and regulation of cellular signaling. We previously demonstrated that SET accumulates in head and neck squamous cell carcinoma (HNSCC); hnRNPK is a prognostic marker in cancer. Here, we postulate that SET and hnRNPK proteins interact to promote tumorigenesis. We performed studies in HEK293 and HNSCC (HN6, HN12, and HN13) cell lines with SET/hnRNPK overexpression and knockdown, respectively. We found that SET and/or hnRNPK protein accumulation increased cellular proliferation. SET accumulation up-regulated hnRNPK mRNA and total/phosphorylated protein, promoted hnRNPK nuclear location, and reduced Bcl-x mRNA levels. SET protein directly interacted with hnRNPK, increasing both its binding to nucleic acids and Bcl-xS repression. We propose that hnRNPK should be a new target of SET and that SET–hnRNPK interaction, in turn, has potential implications in cell survival and malignant transformation.

60 APPLIED LIFE SCIENCES↗

Design Study of Wafer Seals for Future Hypersonic Vehicles

Future hypersonic vehicles require high temperature, dynamic seals in advanced hypersonic engines and on the vehicle airframe to seal the perimeters of movable panels, flaps, and doors. Current seals do not meet the demanding requirements of these applications, so NASA Glenn Research Center is developing improved designs to overcome these shortfalls. An advanced ceramic wafer seal design has shown promise in meeting these needs. Results from a design of experiments study performed on this seal revealed that several installation variables played a role in determining the amount of leakage past the seals. Lower leakage rates were achieved by using a tighter groove width around the seals, a higher seal preload, a tighter wafer height tolerance, and a looser groove length. During flow testing, a seal activating pressure acting behind the wafers combined with simulated vibrations to seat the seals more effectively against the sealing surface and produce lower leakage rates. A seal geometry study revealed comparable leakage for full-scale wafers with 0.125 and 0.25 in. thicknesses. For applications in which lower part counts are desired, fewer 0.25-in.-thick wafers may be able to be used in place of 0.125-in.-thick wafers while achieving similar performance. Tests performed on wafers with a rounded edge (0.5 in. radius) in contact with the sealing surface resulted in flow rates twice as high as those for wafers with a flat edge. Half-size wafers had leakage rates approximately three times higher than those for full-size wafers.

Dunlap, Patrick H.↗