Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Facile one-pot synthesis and characterization of nickel supported on hierarchically porous carbon

Highlights: • Novel, inexpensive, one-pot, synthesis method for Ni on hierarchically porous carbon. • Disappearance of surfactant mesopores seen with incorporation of nickel. • Distribution of Ni nanoparticles on the hierarchically porous carbon support was studied by SEM. • Nickel nanoparticles were dispersed on macropore walls and not within carbon. - Abstract: Described is a novel, facile route for the synthesis of nickel supported on hierarchically porous carbon (Ni/HPC) using a one-pot co-gelation sol–gel method. Ni/HPC with varying nickel loadings (0.5, 1, 2.5 and 5 wt% Ni) were synthesized and the materials characterized by nitrogen physisorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared (FTIR) and Raman spectroscopies. The results show a three-dimensional network of disordered carbon with fine nickel nanoparticles of sizes ranging from 8 nm to 13 nm at 0.5 wt% Ni loading which gradually increased with increase in the Ni loading. The carbon structure was retained at the macropore level, but not at the mesoscale where the ordered mesopores were lost on nickel addition. The nickel nanoparticles were observed to grow on the surface of the ligaments. This may make them particularly suitable for low pressure Ni-catalyzed organic transformations e.g., hydrogenations, C–C coupling, C-heteroatom coupling, etc.

36 MATERIALS SCIENCE↗

Effect of Ag nanoparticles deposition on photocatalytic activity of Ag{sub 2}SO{sub 3}

Highlights: • Ag{sub 2}SO{sub 3} was developed as novel photocatalyst. • The effect of Ag nanoparticles deposition on photocatalytic activity was investigated. • The activation and deactivation mechanism was proposed. - Abstract: A novel photocatalyst Ag{sub 2}SO{sub 3} was prepared and the effect of Ag nanoparticles, photo-deposited on the surface of Ag{sub 2}SO{sub 3}, on its photocatalytic activity was investigated. The as-prepared photocatalyst was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV–vis diffuse reflection spectroscopy (DRS). The photocatalytic activity was evaluated by photo-degradation of rhodamine B dye under UV light irradiation. It was found that the photocatalytic activity of Ag{sub 2}SO{sub 3} was initially enhanced with deposition of Ag nanoparticles, but subsequently declined with Ag nanoparticles overloaded. The possible mechanism was proposed based on experimental results. These findings may contribute to developing novel photocatalysts and understanding of fundamentals of Ag-based photocatalytic materials.

36 MATERIALS SCIENCE↗

A novel fabrication of Cu{sub 2}O@Cu{sub 7}S{sub 4} core-shell micro/nanocrystals from Cu{sub 2}O temples and enhanced photocatalytic activities

Highlights: • The Cu{sub 2}O@Cu{sub 7}S{sub 4} core-shell crystals maintained the same morphology with template. • The crystals exhibit enhanced photocatalytic activity than the pure Cu{sub 2}O crystals. • The photocatalytic activity of different R crystals is diverse from each other. • A possible formation mechanism has been proposed. - Abstract: Uniform and monodispersed Cu{sub 2}O@Cu{sub 7}S{sub 4} core-shell micro/nanocrystals have been synthesized successfully at room temperature via a simple chemical etching reaction, using Cu{sub 2}O as sacrificial template. The structure and properties of the crystals were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS). The photocatalytic activity of the Cu{sub 2}O@Cu{sub 7}S{sub 4} crystals was evaluated by photocatalytic decolorization of MeO (methyl orange) aqueous solution at ambient temperature under visible-light irradiation. The results show that the as-prepared Cu{sub 2}O@Cu{sub 7}S{sub 4} crystals revealed core-shell structure, which maintained the same morphology with corresponding template and were composed of cuboctahedron Cu{sub 7}S{sub 4} shell and active Cu{sub 2}O core. Due to the unique Cu{sub 2}O@Cu{sub 7}S{sub 4} core-shell structure, the crystals exhibit enhanced photocatalytic activity than that of the pure Cu{sub 2}O crystals, and the photocatalytic activity of different R crystals is diverse from each other. A possible formation mechanism has been proposed.

36 MATERIALS SCIENCE↗

Plasmonic Ag/Ag2O nanoparticles anchored needle-like Bi2O3 as an efficient visible-light-driven nanocomposite photocatalyst

Highlights: • Deposition of plasmonic Ag/Ag{sub 2}O NPs on the surface of Bi{sub 2}O{sub 3}. • Synthesis of Ag/Ag{sub 2}O@Bi{sub 2}O{sub 3} by thermal-assisted precipitation. • SPR of Ag enhances use of solar energy and transfer of carriers. • Degradation of Reactive Black 5 by CCD model. - Abstract: In this study, a thermal-assisted precipitation method was applied for the uniform deposition of plasmonic Ag/Ag{sub 2}O nanoparticles on the surface of needle-like Bi{sub 2}O{sub 3} to synthesis Ag/Ag{sub 2}O@Bi{sub 2}O{sub 3} nanocomposite. The synthesized nanocomposite was characterized by different techniques including UV–vis spectrophotometry, X-ray diffraction (XRD), scanning electronic microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray mapping, and photoluminescence (PL). The visible-light-driven photocatalytic activities of Ag{sub 2}O@Bi{sub 2}O{sub 3} and Ag/Ag{sub 2}O@Bi{sub 2}O{sub 3} were evaluated on photo-degradation of Reactive Black 5 (RB 5) dye as model pollutant. The effect of process variables including the initial dye concentration, reaction time, and pH on the photo-degradation of RB 5 was studied by Central Composite Design (CCD) methodology. It was found that the photo-degradation rate of Ag/Ag{sub 2}O@Bi{sub 2}O{sub 3} was higher than that of the Ag{sub 2}O@Bi{sub 2}O{sub 3} and Bi{sub 2}O{sub 3}. The highly efficient photocatalytic activity of Ag/Ag{sub 2}O@Bi{sub 2}O{sub 3} nanocomposite is mainly ascribed to enhancing photogenerated electron-hole separation and the surface plasmon resonance (SPR) influence of silver-based nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Accelerated carbonation using municipal solid waste incinerator bottom ash and cold-rolling wastewater: Performance evaluation and reaction kinetics

Highlights: • Carbonation was performed using CO{sub 2}, wastewater and bottom ash in a slurry reactor. • A maximum capture capacity of 102 g CO{sub 2} per kg BA was achieved at mild conditions. • A maximum carbonation conversion of MSWI-BA was predicted to be 95% by RSM. • The CO{sub 2} emission from Bali incinerator could be expected to reduce by 6480 ton/y. • The process energy consumption per ton CO{sub 2} captured was estimated to be 180 kW h. - Abstract: Accelerated carbonation of alkaline wastes including municipal solid waste incinerator bottom ash (MSWI-BA) and the cold-rolling wastewater (CRW) was investigated for carbon dioxide (CO{sub 2}) fixation under different operating conditions, i.e., reaction time, CO{sub 2} concentration, liquid-to-solid ratio, particle size, and CO{sub 2} flow rate. The MSWI-BA before and after carbonation process were analyzed by the thermogravimetry and differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy equipped with energy dispersive X-ray spectroscopy. The MSWI-BA exhibits a high carbonation conversion of 90.7%, corresponding to a CO{sub 2} fixation capacity of 102 g per kg of ash. Meanwhile, the carbonation kinetics was evaluated by the shrinking core model. In addition, the effect of different operating parameters on carbonation conversion of MSWI-BA was statistically evaluated by response surface methodology (RSM) using experimental data to predict the maximum carbonation conversion. Furthermore, the amount of CO{sub 2} reduction and energy consumption for operating the proposed process in refuse incinerator were estimated. Capsule abstract: CO{sub 2} fixation process by alkaline wastes including bottom ash and cold-rolling wastewater was developed, which should be a viable method due to high conversion.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis of BiSrCa(Y)CuO superconductor from the sol-gel method and the effect of Y substitution

Superconducting Bi{sub 2}Sr{sub 2}Ca{sub 1-x}Y{sub x}Cu{sub 2}O{sub 8} ceramics samples have been prepared by Sol-Gel methods using citrate process. The influences of the conditions of preparation of oxide powder compound on structural and superconducting properties have been investigated by X ray diffraction (XRD), Scanning Electron Microscopy (SEM) equipped with EDS. The critical transition temperatures Tc have been determined by resistivity versus temperature measurements. Cell parameters samples were calculated from XRD patterns. The polyacryl amide gel makes the citrate process easier, more rapid and affords the possibility of synthesis of high quality oxide powders.

36 MATERIALS SCIENCE↗

Nanostructuring on zinc phthalocyanine thin films for single-junction organic solar cells

Vertically aligned and random oriented crystalline molecular nanorods of organic semiconducting Zinc Phthalocyanine (ZnPc) have been grown on ITO coated glass substrate using solvent volatilization method. Interesting changes in surface morphology were observed under different solvent treatment. Vertically aligned nanorods of ZnPc thin film were observed in the films treated with acetone, where as the random oriented nanorods were observed in the films treated with chloroform. The X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) have been used for characterization of nanostructures. The optical properties of the nanorods have been investigated by UV-Vis. absorption spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of magneto-optic effect on Mn{sub 1-x}Zn{sub x}Fe{sub 2}O{sub 4} nanoferrofluids

Mn{sub 1-x}Zn{sub x}Fe{sub 2}O{sub 4} nanoparticles (with x varying as 0.1, 0.3, 0.5, 0.7 and 0.9) have been synthesized by co- precipitation method using polyvinyl alcohol as surfactant. Structural analysis and surface morphology of the samples were analysed using X-ray diffraction and scanning electron microscope respectively. The Scherer approximation was used to obtain crystallite sizes and found to decrease from 8.9 nm to 4.3 nm with increase in zinc substitution. The chemical composition of samples obtained through EDAX was comparable with the initial substitutions. Saturation magnetization (M{sub s}), Remanence (M{sub r}) and Coercivity (H{sub c}) were measured using VSM at room temperature and found to decrease with increase in zinc substitution. Verdet constant of the samples are obtained from Faraday rotation for various magnetic fields and it varies from 18 × 10{sup −4} to 3 × 10{sup −4}deg/Gcm with zinc substitution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of Simulated BWR and Steam Exposed FeCrAl Coated Zircaloy 2

To combat the rapid oxidation that occurs in nuclear reactors during transient scenarios, investigations into modifying or replacing the existing zirconium based cladding and structural material have become a focus. Aside from testing these alternatives in the transient scenarios, verification of performance under normal operation is necessary. This work will examine the effect of normal BWR water chemistry over two time periods on FeCrAl coated Zircaloy 2 (Zry2) and its response to high temperature steam. X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray Spectroscopy (EDS), and Thermogravimetric (TG) analysis are utilized to analyze the chemical and physical changes caused by these exposures. These tests show that under short time periods, normal water chemistry BWR conditions do not adversely change the effectiveness of a FeCrAl coating. A spinel structure was formed using Ni from an external source, however it did not have a major impact on the coatings performance in high temperature steam. Additional autoclave exposures up to 40 hours are ongoing, including coatings which were proton irradiated up to 5 dpa. (authors)

36 MATERIALS SCIENCE↗

Topological insulator Bi{sub 2}Se{sub 3} thin films grown on double-layer graphene by molecular beam epitaxy

Atomically flat thin films of topological insulator Bi{sub 2}Se{sub 3} have been grown on double-layer graphene formed on 6H-SiC(0001) substrate by molecular beam epitaxy. By a combined study of reflection high energy electron diffraction and scanning tunneling microscopy, we identified the Se-rich condition and temperature criterion for layer-by-layer growth of epitaxial Bi{sub 2}Se{sub 3} films. The as-grown films without doping exhibit a low defect density of 1.0{+-}0.2x10{sup 11}/cm{sup 2}, and become a bulk insulator at a thickness of ten quintuple layers, as revealed by in situ angle resolved photoemission spectroscopy measurement.

36 MATERIALS SCIENCE↗

Structural, Morphological and Optical properties of Sputtered Nickel oxide Thin Films

Nickel oxide (NiO) thin films have been deposited by dc reactive magnetron sputtering technique on glass substrates at various substrate temperatures in the range of 303 to 723 K. The influence of substrate temperature on structural, morphological, compositional and optical properties was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive spectroscopy (EDS) and spectrophotometer studies. The structural properties of the films were strongly influenced by the substrate temperature. From the microstructural studies, fine and uniform grains were grown with RMS roughness of 9.4 nm at substrate temperature of 523 K. The optical results indicated that the optical transmittance of the films increases with increasing substrate temperature up to 523 K, thereafter decreases. The optical band of the films increases with substrate temperature initially, thereafter decreased at higher temperatures. The Highest optical transmittance of 60 % and optical band gap of 3.82 eV was observed in the present study.

36 MATERIALS SCIENCE↗

Multi-scale time-resolved electron diffraction: A case study in moiré materials

Ultrafast-optical-pump — structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. Here we deploy a hybrid pixel array direct electron detector to perform ultrafast electron diffraction experiments on a WSe 2 /MoSe 2 2D heterobilayer, resolving the weak features of diffuse scattering and moiré superlattice structure without saturating the zero order peak. Enabled by the detector’s high frame rate, we show that a chopping technique provides diffraction difference images with signal-to-noise at the shot noise limit. Finally, we demonstrate that a fast detector frame rate coupled with a high repetition rate probe can provide continuous time resolution from femtoseconds to seconds, enabling us to perform a scanning ultrafast electron diffraction experiment that maps thermal transport in WSe 2 /MoSe 2 and resolves distinct diffusion mechanisms in space and time.

36 MATERIALS SCIENCE↗

Mechanical Properties of Iron Alumininides Intermetallic Alloy with Molybdenum Addition

In this work, FeAl-based alloys with and without molybdenum addition were fabricated by sintering of mechanically alloyed powders in order to investigate the effect of molybdenum on iron aluminide mechanical properties. Bulk samples were prepared by mechanical alloying for 4 hours, pressing at 360 MPa and sintering at 1000 deg. C for 2 hours. The specimens were tested in compression at room temperature using Instron machine. The phase identification and microstructure of the consolidated material was examined by x-ray diffraction and scanning electron microscope correspondingly. Results show that 2.5 wt%Mo addition significantly increased the ultimate stress and ultimate strain in compressive mode due to solid solution hardening. However, the addition of Mo more than 2.5 wt% was accompanied by a reduction in both properties caused by the presence of Mo-rich precipitate particles.

36 MATERIALS SCIENCE↗

Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash

The effect of minor additions of limestone powder on the properties of fly ash blended cements was investigated in this study using isothermal calorimetry, thermogravimetry (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) techniques, and pore solution analysis. The presence of limestone powder led to the formation of hemi- and monocarbonate and to a stabilisation of ettringite compared to the limestone-free cements, where a part of the ettringite converted to monosulphate. Thus, the presence of 5% of limestone led to an increase of the volume of the hydrates, as visible in the increase in chemical shrinkage, and an increase in compressive strength. This effect was amplified for the fly ash/limestone blended cements due to the additional alumina provided by the fly ash reaction.

36 MATERIALS SCIENCE↗

Cryogenic EBSD reveals structure of directionally solidified ice–polymer composite

Despite considerable research efforts on directionally solidified or freeze-cast materials in recent years, little fundamental knowledge has been gained that links model with experiment. In this contribution, the cryogenic characterization of directionally solidified polymer solutions illustrates, how powerful cryo-scanning electron microscopy combined with electron backscatter diffraction is for the structural characterization of ice–polymer composite materials. Under controlled sublimation, the freeze-cast polymer scaffold structure is revealed and imaged with secondary electrons. Electron backscatter diffraction fabric analysis shows that the ice crystals, which template the polymer scaffold and create the lamellar structure, have a-axes oriented parallel to the direction of solidification and the c-axes perpendicular to it. These results indicate the great potential of both cryo-scanning electron microscopy and cryo-electron backscatter diffraction in gaining fundamental knowledge of structure–property–processing correlations. - Highlights: • Cryo-SEM of freeze-cast polymer solution reveals an ice-templated structure. • Cryo-EBSD reveals the ice crystal a-axis to parallel the solidification direction. • The honeycomb-like polymer phase favors columnar ridges only on one side. • Combining cryo-SEM with EBSD links solidification theory with experiment.

36 MATERIALS SCIENCE↗

Magnetic Properties of Co-doped Bismuth Oxide (δ-Bi{sub 2}O{sub 3}) at Low Temperature

The (Bi{sub 2}O{sub 3}){sub 1−x−y}(Gd{sub 2}O{sub 3}){sub x}(Lu{sub 2}O{sub 3}){sub y} material compounds were prepared by using the solid-state reaction technique under normal air conditions. The heat treatments of the ternary samples were performed firstly at 800 °C for 48 h and then at 750 °C for 100 h. The structural, morphological, and magnetic properties of the materials were characterized by X-ray powder diffraction (XRD), scanning electron microscope, and a Quantum Design PPMS-9T system, respectively. From the XRD results, it was found that the phases of all of the samples consisted of the fluorite-type face-centered cubic δ-Bi{sub 2}O{sub 3} phase. It was observed that the microstructure of the samples is uniformly distributed on the samples’ surface. The temperature dependence of magnetization (M–T) measurements showed that the magnetization rose sharply at the critical temperature. The calculated critical temperature values vary from 22.19 to 56.61 K for the samples. All of the samples displayed the paramagnetic behavior. The paramagnetic behavior started from 300 K to very low temperature which varied from 22.19 to 56.61 K. The coercive rise on the magnetization below 22.19 K or 56.61 K with decreasing temperature causes a phase transformation in the δ-Bi{sub 2}O{sub 3} system. This sudden increment was considered as a ferromagnetic or ferrimagnetic phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Cr{sup 3+} Ions Substitution on Structural and Magnetic Properties of Co Ferrite Nanoparticles

A series of polycrystalline nanoferrite having the chemical formula CoCr{sub x}Fe{sub 2−x}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0) were synthesized by sol-gel autocombustion method. X-ray diffraction (XRD) analysis was used to investigate the structural parameters and also to check the phase purity of all prepared samples. The analysis of XRD patterns revealed the formation of single-phase cubic spinel structure for all samples. The average particle size of the synthesized ferrites was identified by X-ray diffraction and scanning electron microscopy technique. The magnetic properties of Co-Cr nanoferrites were measured using a hysteresis loop tracer at room temperature and magnetic field of 5 KOe. Saturation magnetization (M{sub s}) and coercivity (H{sub c}) decrease with the increasing Cr{sup 3+} ions concentration in the Co-Cr ferrite, indicating that lesser magnetic Cr{sup 3+} ions substitute Fe{sup 3+} ions in the octahedral sublattice of the ferrite. Such materials are useful to reduce the energy loss in AC electrical appliances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Behavior of Iron-Rich Permalloy Nanoparticles

Iron-rich permalloy Fe{sub x}Ni{sub 1−x} nanoparticles (NPs) were fabricated using a low-temperature wet chemistry method involving the hydrothermal growth of the NPs. Three Fe–Ni NPs (Fe{sub 0.5}Ni{sub 0.5}, Fe{sub 0.625}Ni{sub 0.375}, and Fe{sub 0.83}Ni{sub 0.17}) were fabricated and studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and vibrating sample magnetometer (VSM). After the initial formations, the three Fe–Ni NPs were annealed at 200, 400, and 600 °C; the XRD showed that all three FeNi NPs had a bcc structure (not the fcc structure of the standard Fe{sub 20}Ni{sub 80} permalloy). The SEM images showed that the NPs had spherical shapes. The VSM measurements showed that none of the Fe–Ni nanoparticles were superparamagnets but were ferromagnets. The heat treatments cause the work needed to the flip the spin (coercivity (H{sub c})) to increase and the values of the saturation magnetizations to fluctuate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗