Search NASA⌕ Search

SEARCH · Search NASA

Results for “selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Strategies for crew selection for long duration missions

Issues surrounding psychological reactions to long duration spaceflight are discussed with respect to the definition of criteria for selecting crewmembers for such expeditions. Two broad dimensions of personality and behavior are defined - Instrumentality including achievement orientation, leadership, and ability to perform under pressure and Expressivity encompassing interpersonal sensitivity and competence. A strategy for validating techniques to select in candidates with the optimum psychological profile to perform successfully on long duration missions is described.

Helmreich, Robert L.↗
NASA NTRS1990

Summary of interference measurements at selected radio observatories

Results are presented from a series of RF interference (RFI) observations conducted during 1989 and 1990 at selected radio astronomy observatories in order to choose a site for the SETI, where the local and orbital RFI would be as benign as possible for observations of weak electromagnetic signals. These observatories included the DSS13 at Goldstone (California), the Arecibo Observatory (Puerto Rico), the Algonquin Radio Observatory in Ottawa (Canada), the Ohio State University Radio Observatory in Columbus (Ohio), and the NRAO in Green Bank (West Virginia). The observations characterize the RFI environment at these sites from 1 to 10 GHz, using radio astronomy antennas, feeds, and receivers; SETI signal processors; and stand-alone equipment built specifically for this purpose. The results served as part of the basis for the selection (by the NASA SETI Microwave Observing Project) of NRAO as the site of choice for SETI observations.

Tarter, Jill C.↗
NASA NTRS1989

Selection of optimum median-filter-based ambiguity removal algorithm parameters for NSCAT

The NASA Scatterometer, NSCAT, is an active spaceborne radar designed to measure the normalized radar backscatter coefficient (sigma0) of the ocean surface. These measurements can, in turn, be used to infer the surface vector wind over the ocean using a geophysical model function. Several ambiguous wind vectors result because of the nature of the model function. A median-filter-based ambiguity removal algorithm will be used by the NSCAT ground data processor to select the best wind vector from the set of ambiguous wind vectors. This process is commonly known as dealiasing or ambiguity removal. The baseline NSCAT ambiguity removal algorithm and the method used to select the set of optimum parameter values are described. An extensive simulation of the NSCAT instrument and ground data processor provides a means of testing the resulting tuned algorithm. This simulation generates the ambiguous wind-field vectors expected from the instrument as it orbits over a set of realistic meoscale wind fields. The ambiguous wind field is then dealiased using the median-based ambiguity removal algorithm. Performance is measured by comparison of the unambiguous wind fields with the true wind fields. Results have shown that the median-filter-based ambiguity removal algorithm satisfies NSCAT mission requirements.

Shaffer, Scott↗
NASA NTRS1990

Analytic theory for the selection of Saffman-Taylor fingers in the presence of thin film effects

The present analytic theory for the width selection of Saffman-Taylor (1958) fingers in the presence of the thin film effect establishes that, in the limit of a small capillary number and a small gap-to-width ratio, fingers whose relative width is smaller than 1/2 are possible. It is established that a fully nonlinear analysis is required for this problem in order to obtain even the correct (and rather preliminary) scaling law. The way in which the selection rule for arbitrary small capillary number is obtainable is also presented.

Tanveer, S.↗
NASA NTRS1991

The redshift of the X-ray selected BL Lacertae object H0414 + 009

The X-ray selected BL Lac object H0414 + 009 has a redshift of 0.287; the optical spectrum is well described by the sum of a standard elliptical galaxy plus a relatively flat power law. The galaxy contributes about 40 percent of the light in the spectrum in the rest-frame V band, and is one of the most luminous galaxies known. The properties of H0414 + 009 are similar in all respects to a previously studied object, 1E 1415 + 259 at z = 0.237. If X-ray selected BL Lacs continue to be found in such bright galaxies, then the properties of studying their luminosity function and evolution are considerably enhanced. There is also possible evidence for intrinsic X-ray absorption by a warm medium, as has been found in several other BL Lacs.

Halpern, Jules P.↗
NASA NTRS1991

Scale selection and propagation of wave-CISK with conditional heating

Analytic solutions are derived for simple models of equatorial wave-CISK with conditional (positive-only) heating. Conditional heating favors an unstable mode having a single wet region of infinitesimal width. This result helps explain model simulations of tropical superclusters and intraseasonal oscillations. Mechanisms of scale selection and propagation are discussed, and the model is generalized to include evaporation-wind feedback, multiple vertical-mode CISK, and scale-dependent damping. The first two mechanisms cause zonal propagation, without scale selection. Scale-dependent damping breaks the inviscid continuum (wherein modes exist as a continuous function of wet region width) into discrete modes with unique horizontal structure and phase speed. Results are contrasted with the hierarchy of scales in observed intraseasonal oscillations.

Dunkerton, Timothy J.↗
NASA NTRS1991

A coated-wire ion-selective electrode for ionic calcium measurements

A coated-wire ion-selective electrode for measuring ionic calcium was developed, in collaboration with Teknektron Sensor Development Corporation (TSDC). This coated wire electrode sensor makes use of advanced, ion-responsive polyvinyl chloride (PVC) membrane technology, whereby the electroactive agent is incorporated into a polymeric film. The technology greatly simplifies conventional ion-selective electrode measurement technology, and is envisioned to be used for real-time measurement of physiological and environment ionic constituents, initially calcium. A primary target biomedical application is the real-time measurement of urinary and blood calcium changes during extended exposure to microgravity, during prolonged hospital or fracture immobilization, and for osteoporosis research. Potential advanced life support applications include monitoring of calcium and other ions, heavy metals, and related parameters in closed-loop water processing and management systems. This technology provides a much simplified ionic calcium measurement capability, suitable for both automated in-vitro, in-vivo, and in-situ measurement applications, which should be of great interest to the medical, scientific, chemical, and space life sciences communities.

Hines, John W.↗
NASA NTRS1992

Probabilistic Structural Analysis Methods for select space propulsion system components (PSAM). Volume 3: Literature surveys and technical reports

The technical effort and computer code developed during the first year are summarized. Several formulations for Probabilistic Finite Element Analysis (PFEA) are described with emphasis on the selected formulation. The strategies being implemented in the first-version computer code to perform linear, elastic PFEA is described. The results of a series of select Space Shuttle Main Engine (SSME) component surveys are presented. These results identify the critical components and provide the information necessary for probabilistic structural analysis.

Source record↗
NASA NTRS1992

Probabilistic Structural Analysis Methods for select space propulsion system components (PSAM). Volume 2: Literature surveys of critical Space Shuttle main engine components

The technical effort and computer code development is summarized. Several formulations for Probabilistic Finite Element Analysis (PFEA) are described with emphasis on the selected formulation. The strategies being implemented in the first-version computer code to perform linear, elastic PFEA is described. The results of a series of select Space Shuttle Main Engine (SSME) component surveys are presented. These results identify the critical components and provide the information necessary for probabilistic structural analysis. Volume 2 is a summary of critical SSME components.

Rajagopal, K. R.↗
NASA NTRS1992

Effects of LDEF flight exposure on selected polymer matrix resin composite materials

The characterization of selected graphite fiber reinforced epoxy (934 and 5208) and polysulfone (P1700) matrix resin composites materials which received over five years and nine months of exposure to the low earth orbit (LEO) environment in experiment AO134 on the Long Duration Exposure Facility is reported. The changes in mechanical properties of ultimate tensile strength and tensile modulus for exposed flight specimens are compared to the three sets of control specimens. Marked changes in surface appearance are discussed, and resin loss is reported. The chemical characterization including infrared, thermal, and selected solution property measurements showed that the molecular structure of the polymetric matrix had not changed significantly in response to this exposure.

Slemp, Wayne S.↗
NASA NTRS1991

Lubricant Selection Manual, Phase 3

Future spacecraft must be designated to operate for very long time periods in space. For example, a target goal for the Space Station is 30 years of operation. Although the actual life may be significantly less than this optimistic goal, the life will certainly be a critical issue in design. The bearings on primary components such as the alpha and beta joints must obviously be designed and lubricated with the objective of optimum performance life. In addition to these joints, there will be numerous other tribological (rubbing or rolling) interfaced that will be required to function for the life of the spacecraft. A major key to adequate performance of tribological interface is proper lubrication. Lubricants can be divided into two basic classes: solid films and liquids. Both types have been used extensively in space applications. Both have advantages and disadvantages that must be carefully considered in their selection. The purpose here is to summarize selection criteria for liquid and solid lubricants applied to long-life spacecraft.

Kannel, J. W.↗
NASA NTRS1991

Characterization of selected LDEF polymer matrix resin composite materials

The characterization of selected graphite fiber reinforced epoxy (934 and 5208) and polysulfone (P1700) matrix resin composite materials which received 5 years and 10 months of exposure to the LEO environment on the Long Duration Exposure Facility is reported. Resin loss and a decrease in mechanical performance as well as dramatic visual effects were observed. However, chemical characterization including infrared, thermal, and selected solution property measurements showed that the molecular structure of the polymeric matrix had not changed significantly in response to this exposure. The potential effect of a silicon-containing molecular contamination of these specimens is addressed.

Young, Philip R.↗
NASA NTRS1991

Bit error rate performance of pi/4-DQPSK in a frequency-selective fast Rayleigh fading channel

The bit error rate (BER) performance of pi/4-differential quadrature phase shift keying (DQPSK) modems in cellular mobile communication systems is derived and analyzed. The system is modeled as a frequency-selective fast Rayleigh fading channel corrupted by additive white Gaussian noise (AWGN) and co-channel interference (CCI). The probability density function of the phase difference between two consecutive symbols of M-ary differential phase shift keying (DPSK) signals is first derived. In M-ary DPSK systems, the information is completely contained in this phase difference. For pi/4-DQPSK, the BER is derived in a closed form and calculated directly. Numerical results show that for the 24 kBd (48 kb/s) pi/4-DQPSK operated at a carrier frequency of 850 MHz and C/I less than 20 dB, the BER will be dominated by CCI if the vehicular speed is below 100 mi/h. In this derivation, frequency-selective fading is modeled by two independent Rayleigh signal paths. Only one co-channel is assumed in this derivation. The results obtained are also shown to be valid for discriminator detection of M-ary DPSK signals.

Liu, Chia-Liang↗
NASA NTRS1991

ECLSS regenerative systems comparative testing and subsystem selection

In support of Space Station Freedom Phase C/D Environmental Control and Life Support Systems (ECLSS) regenerative systems development, comparative testing was performed on predevelopment hardware of competing technologies for each regenerative function. The purpose of the test program was to collect data on latest generation hardware in order to make final technology selections for each subassembly in the oxygen recovery and water reclamation strings. This paper discusses the testing performed, test results, and evaluation of these results relative to subsystem selections for CO2 reduction, O2 generation, potable water processing, hygiene water processing, and urine processing.

Carasquillo, Robyn L.↗
NASA NTRS1992

The properties of X-ray selected active galactic nuclei. II - A deeper look at the cosmological evolution

A detailed study of the cosmological properties of X-ray selected AGN is presented. The data are analyzed within the framework of a pure luminosity evolution (PLE) model and the two most population evolutionary forms. Evidence is found for luminosity-dependent luminosity evolution if the evolution function has the exponential form. The simpler PLE model is more acceptable if the data are fitted with a power-law evolution function. Similar results are obtained in the optical domain from an analysis of a sample of optically selected QSOs with z less than 2.2 and B less than 20.

Della Ceca, Roberto↗
NASA NTRS1992

Radio properties of optically selected high-redshift quasars. I - VLA observations of 22 quasars at 6 cm

A total of 22 optically selected high-redshift QSOs were obseved at 5 GHz with the VLA. The measured radio properties of low-redshift optically selected quasars indicate that radio emission should have been detected from 5-10 objects in this sample of high-redshift QSOs, but only one QSO was found to have a radio flux above the 5 sigma limit of roughly 0.2 mJy. Possible explanations of this finding are considered.

Schneider, Donald P.↗
NASA NTRS1992

The discovery of an X-ray selected, radio-loud quasar at z = 3.9

About 600 weak X-ray sources from a data base of about 100,000 2-4sigma fluctuations derived from Einstein Observatory imaging proportional counter X-ray images are selected on the basis of a flux-limited catalog of radio sources in the northern sky. Optical spectroscopy of only six of these sources resulted in the discovery of a quasar with an emission-line redshift of 3.87. Subsequent VLA observations reveal the source to have a flat-spectrum radio core plus an unresolved radio lobe 2.5 arcsec away with a spectral index of 1.45. The lobe is connected to the core by a weak jet. The integrated flux density of the source at 20 cm is 0.66 Jy. The v magnitude of the quasar is 19.5, and the tentative X-ray sources has a very soft spectrum. The properties of this object are discussed in the context of known high-redshift radio sources and existing X-ray selected quasar samples, and the potential of the present discovery technique for examining the properties of very distant active galaxies is explored.

Becker, R. H.↗
NASA NTRS1993

Sensitive, Selective Test For Hydrazines

Derivatives of hydrazines formed, then subjected to gas chromatography and detected via chemiluminescence. In method of detecting and quantifying hydrazine vapors, vapors reacted with dinitro compound to enhance sensitivity and selectivity. Hydrazine (HZ), monomethyl hydrazine, (MMH), and unsymmetrical dimethylhydrazine (UDMH) analyzed quantitatively and qualitatively, either alone or in mixtures. Vapors collected and reacted with 2,4-dinitrobenzaldehyde, (DNB), making it possible to concentrate hydrazine in derivative form, thereby increasing sensitivity to low initial concentrations. Increases selectivity because only those constituents of sample reacting with DNB concentrated for analysis.

Roundbehler, David↗