Search NASA⌕ Search

SEARCH · Search NASA

Results for “sequence variations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence O - Raw Data

Sequence O: Sin AOA, Parked (P) This sequence was designed to quantify the blade 3-D unsteady aerodynamic response in the absence of rotational influences by varying blade pitch angle. This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 18.9 m/s to 39.3 m/s, and the yaw angle was 0° throughout the sequence. The rotor was parked with the instrumented blade fixed at 0° azimuth, and the rotor lock was installed (see Appendix A). Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to -99999.99 Nm. The teeter link load cell was pre-tensioned to 40,000 N. Sinusoidal angle-of-attack histories were designed to emulate 2-D S809 dynamic data obtained at the OSU wind tunnel (Reuss Ramsey et al. 1995) as well as 1P yawed flow angle-of-attack variations the turbine could be expected to encounter in routine operation. The reduced frequency (K), mean angle of attack (αm), and oscillation amplitude (αω) were computed for each of the five primary span locations. The file lengths varied according to the time required to complete 40 oscillations at the specified frequency. The file name convention used the sequence designation O, followed by two digits for the span location (30, 47, 80, or 95), followed by two digits representing the condition specified in the test matrix, followed by the repetition digit. Due to time constraints, the test conditions corresponding to the 63% span location were eliminated. Test points with a static pitch angle of 3° were collected throughout the sequence to ascertain instrumentation fidelity.

17 WIND ENERGY↗

A large sequenced mutant library – valuable reverse genetic resource that covers 98% of sorghum genes

SUMMARY Mutant populations are crucial for functional genomics and discovering novel traits for crop breeding. Sorghum , a drought and heat‐tolerant C4 species, requires a vast, large‐scale, annotated, and sequenced mutant resource to enhance crop improvement through functional genomics research. Here, we report a sorghum large‐scale sequenced mutant population with 9.5 million ethyl methane sulfonate (EMS)‐induced mutations that covered 98% of sorghum's annotated genes using inbred line BTx623. Remarkably, a total of 610 320 mutations within the promoter and enhancer regions of 18 000 and 11 790 genes, respectively, can be leveraged for novel research of cis ‐regulatory elements. A comparison of the distribution of mutations in the large‐scale mutant library and sorghum association panel (SAP) provides insights into the influence of selection. EMS‐induced mutations appeared to be random across different regions of the genome without significant enrichment in different sections of a gene, including the 5′ UTR, gene body, and 3′‐UTR. In contrast, there were low variation density in the coding and UTR regions in the SAP. Based on the K a / K s value, the mutant library (~1) experienced little selection, unlike the SAP (0.40), which has been strongly selected through breeding. All mutation data are publicly searchable through SorbMutDB ( https://www.depts.ttu.edu/igcast/sorbmutdb.php ) and SorghumBase ( https://sorghumbase.org/ ). This current large‐scale sequence‐indexed sorghum mutant population is a crucial resource that enriched the sorghum gene pool with novel diversity and a highly valuable tool for the Poaceae family, that will advance plant biology research and crop breeding.

59 BASIC BIOLOGICAL SCIENCES↗

THREE-DIMENSIONAL SHAPE AND EVOLUTION OF TWO ERUPTIVE FILAMENTS

On 2009 September 26, a dramatic and large filament (LF) eruption and a small filament (SF) eruption were observed in the He II 304 A line by the two EUVI telescopes aboard the STEREO A and B spacecraft. The LF heads out into space and becomes the bright core of a gradual coronal mass ejection (CME), while the eruption of the SF is characterized by motions of the filament materials. Using stereoscopic analysis of EUVI data, we reconstruct the three-dimensional shape and evolution of two eruptive filaments. For the first time, we investigate the true velocities and accelerations of 12 points along the axis of the LF, and find that the velocity and acceleration vary with the measured location. The highest points among the 12 points are the fastest in the first half hour, and then the points at the low-latitude leg of the LF become the fastest. For the SF, it is an asymmetric whip-like filament eruption, and the downward motions of the material lead to the disappearance of the former high-latitude endpoint and the formation of a new low-latitude endpoint. Based on the temporal evolution of the two filaments, we infer that the two filaments lie in the same filament channel. By combining the EUVI, COR1, and COR2 data of STEREO A together, we find that there is no impulsive or fast acceleration in this event. It displays a weak and persistent acceleration for more than 17 hr. The average velocity and acceleration of the LF are 101.8 km s{sup -1} and 2.9 m s{sup -2}, respectively. The filament eruptions are associated with a slow CME with an average velocity of 177.4 km s{sup -1}. The velocity of the CME is nearly 1.6 times as large as that of the filament material. This event is one example of a gradual filament eruption associated with a gradual CME. In addition, the moving direction of the LF changes from a non-radial to a nearly radial direction with a variation of inclination angle of nearly 38.{sup 0}2.

79 ASTRONOMY AND ASTROPHYSICS↗

Recruiting Human Microbiome Shotgun Data to Site-Specific Reference Genomes

The human body consists of innumerable multifaceted environments that predispose colonization by a number of distinct microbial communities, which play fundamental roles in human health and disease. In addition to community surveys and shotgun metagenomes that seek to explore the composition and diversity of these microbiomes, there are significant efforts to sequence reference microbial genomes from many body sites of healthy adults. To illustrate the utility of reference genomes when studying more complex metagenomes, we present a reference-based analysis of sequence reads generated from 55 shotgun metagenomes, selected from 5 major body sites, including 16 sub-sites. Interestingly, between 13% and 92% (62.3% average) of these shotgun reads were aligned to a then-complete list of 2780 reference genomes, including 1583 references for the human microbiome. However, no reference genome was universally found in all body sites. For any given metagenome, the body site-specific reference genomes, derived from the same body site as the sample, accounted for an average of 58.8% of the mapped reads. While different body sites did differ in abundant genera, proximal or symmetrical body sites were found to be most similar to one another. The extent of variation observed, both between individuals sampled within the same microenvironment, or at the same site within the same individual over time, calls into question comparative studies across individuals even if sampled at the same body site. This study illustrates the high utility of reference genomes and the need for further site-specific reference microbial genome sequencing, even within the already well-sampled human microbiome.

59 BASIC BIOLOGICAL SCIENCES↗

Scale-dependent effects of climate and geographic distance on bacterial diversity patterns across northern China's grasslands

Patterns of variation in plant and animal diversity along precipitation gradients have been extensively studied, but much less is known about how and to what extent precipitation affects the biogeographic distribution of microbial diversity in arid areas across large spatial scales. Here we collected soils from 54 sites along a 3700 km transect covering a wide range of grassland ecosystems with distinct aridity gradients. We quantified the bacterial community diversity and the effects of climate, edaphic parameter and geographic distance on the bacterial community structure using high-throughput 16S rRNA gene sequencing. Of the 35 phyla detected, 6 were dominant: Actinobacteria, Acidobacteria, Alphaproteobacteria, Deltaproteobacteria, Bacteroidetes and Planctomycetes . Aridity was a major factor influencing bacterial diversity, community composition and taxon abundance. Although the pattern of bacterial species richness is markedly different from that of plant species richness, most soil bacteria were endemic to particular bioregions like macro-organisms. Community similarity significantly declined with environmental distance and geographic distance (r = -0.579 and -0.773, respectively). Geographic distance (historical contingencies) contributed more to bacterial community variation (36.02%) than combined environmental factors (24.06%). Finally, our results showed that geographic distance and climatic factors concurrently govern bacterial biogeographic patterns in arid and semi-arid grassland.

59 BASIC BIOLOGICAL SCIENCES↗

MAL33 drives natural variation in maltose metabolism in Saccharomyces eubayanus

Maltose is one of the most abundant sugars in brewer’s wort, and its efficient utilization is critical for successful fermentation. However, maltose consumption varies naturally among Saccharomyces eubayanus strains isolated from different host trees, such as Quercus and Nothofagus. To identify the genetic determinants underlying these phenotypic differences, we performed bulk segregant analysis (BSA) and quantitative trait loci (QTL) mapping using an F 2 offspring derived from QC18 (Quercus-associated) and CL467.1 (Nothofagus-associated) strains. QTL mapping identified two significant genomic regions on subtelomeric loci of chromosomes V-R and XVI-L, each containing complete MAL loci composed of MAL32 (encoding maltase), MAL31 (transporter), and MAL33 (transcriptional activator) genes. Comparative polymorphism analyses identified mutations in MAL32 and MAL33 of QC18, including frameshift mutations resulting in premature stop codons. Functional validation demonstrated that the heterologous expression of MAL33 ChrV from CL467.1 fully restored maltose utilization in QC18, indicating the functional presence of MAL33 cis-regulatory sequences and MAL32 and MAL31 genes in QC18. While structural protein predictions identified truncation and impaired functionality in the maltose-responsive activation domain of Mal33p from QC18, overexpression of QC18’s own MAL33 ChrV allele also improved maltose metabolism, suggesting dosage-dependent transcriptional limitations rather than complete functional loss. These results indicate that allelic variations in the maltose-responsive activation domain of Mal33p result in differences in maltose consumption between strains. Here, we hypothesized that reduced maltose metabolism in QC18 is an adaptive response to the distinct sugar composition in Quercus robur bark, contrasting with the starch-rich environment of Nothofagus pumilio. These findings highlight subtelomeric MAL gene diversity as a reservoir of genetic variation, representing a key evolutionary mechanism that influences maltose adaptation among natural Saccharomyces isolates.

evolutionary plasticity↗

RT-2 DETECTION OF QUASI-PERIODIC PULSATIONS IN THE 2009 JULY 5 SOLAR HARD X-RAY FLARE

We present the results of an analysis of hard X-ray observations of the C2.7 solar flare detected by the RT-2 experiment on board the Coronas-Photon satellite. We detect hard X-ray pulsations at periods of {approx}12 s and {approx}15 s. We find a marginal evidence for a decrease in period with time. We have augmented these results using the publicly available data from the RHESSI satellite. We present a spectral analysis and measure the spectral parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

EVIDENCE FOR THE WHITE DWARF NATURE OF MIRA B

The nature of the accreting companion to Mira-the prototypical pulsating asymptotic giant branch star-has been a matter of debate for more than 25 years. Here, we use a quantitative analysis of the rapid optical brightness variations from this companion, Mira B, which we observed with the Nickel Telescope at Lick Observatory, to show that it is a white dwarf (WD). The amplitude of aperiodic optical variations on timescales of minutes to tens of minutes ({approx}0.2 mag) is consistent with that of accreting WDs in cataclysmic variables on these same timescales. It is significantly greater than that expected from an accreting main-sequence star. With Mira B identified as a WD, its ultraviolet (UV) and optical luminosities, along with constraints on the WD effective temperature from the UV, indicate that it accretes at {approx}10{sup -10} M{sub sun} yr{sup -1}. This accretion rate is lower than that predicted by Bondi-Hoyle theory. The accretion rate is high enough, however, to explain the weak X-ray emission, since the accretion-disk boundary layer around a low-mass WD accreting at this rate is likely to be optically thick and therefore to emit primarily in the far or extreme UV. Furthermore, the finding that Mira B is a WD means that it has experienced, and will continue to experience, nova explosions, roughly every 10{sup 6} years. It also highlights the similarity between Mira AB and other jet-producing symbiotic binaries such as R Aquarii, CH Cygni, and MWC 560, and therefore raises the possibility that Mira B launched the recently discovered bipolar streams from this system.

79 ASTRONOMY AND ASTROPHYSICS↗

Coxsackievirus B4 sewage-isolate induces pancreatitis after oral infection of mice

ABSTRACT Numerous serotypes which belong to the genus Enterovirus (EV) show variability in their virulence and clinical manifestations. They are also known to undergo changes caused by mutations and recombination during their circulation in the environment and the population. Various EV serotypes are prevalent in groundwater, wastewater and surface waters. Our previous studies showed that oral infection induces pancreatitis depending on specific conditions, such as gravidity, in an outbred murine model. Our aim in the present study was to further explore the pancreatic histopathology in an outbred mouse model following oral infection with clinical isolates from a patient who had aseptic meningitis and an isolate from a treated-sewage sample recovered from the residential area of the patient. The isolates were identified as coxsackievirus B4 (CVB4) in tissue culture. The CVB4 sewage-isolate induced pancreatitis after oral infection. In contrast, pancreatitis was absent following infection with the clinical isolates. Comparison of polyprotein sequences showed that the treated-sewage strains differed from the patient's isolates by 9 and 11 amino acids. We conclude that the isolates of clinical and environmental origin differed in their pathogenic properties and showed genetic variation.

Benkoova, Brigita↗

Peptoid-based membrane-mimetic two dimensional nanomaterials

This paper presents a review of membrane-mimetic two dimensional (2D) nanomaterials assembled from sequence-defined, diblock-like peptoids through an evaporation-induced crystallization method. Similar to those associated with cell membranes, these peptoid-based nanomembranes exhibit thicknesses in the 3.5 - 5.6 nm range, spontaneous assembly at interfaces, thickness variations in response to changes in Na+ concentrations, and the ability to self-repair. Moreover, they are highly stable, free-standing, and atomically ordered. Both experimental and simulations studies showed that these nanomembranes were formed through an anisotropic formation process. We further demonstrated the incorporation and patterning of a broad range of functional groups within peptoid membranes through large side-chain diversity and/or co-crystallization approaches. By tuning the peptoid hydrophobic domains which determine the stability of nanomembranes, we demonstrated the assembly of single-walled crystalline nanotubes through folding peptoid-based 2D nanomaterials. Given peptoids are biocompatible and easy to synthesize, we anticipate this new class of peptoid-based 2D nanomaterials will provide a robust platform for development of biomimetic materials tailored to specific applications.

Chen, Chunlong↗

Toward correcting drift in target position during radiotherapy via computer-controlled couch adjustments on a programmable Linac

Purpose: Real-time tracking of respiratory target motion during radiation therapy is technically challenging, owing to rapid and possibly irregular breathing variations. The authors report on a method to predict and correct respiration-averaged drift in target position by means of couch adjustments on an accelerator equipped with such capability. Methods: Dose delivery is broken up into a sequence of 10 s field segments, each followed by a couch adjustment based on analysis of breathing motion from an external monitor as a surrogate of internal target motion. Signal averaging over three respiratory cycles yields a baseline representing target drift. A Kalman filter predicts the baseline position 5 s in advance, for determination of the couch correction. The method's feasibility is tested with a motion phantom programmed according to previously recorded patient signals. Computed couch corrections are preprogrammed into a research mode of an accelerator capable of computer-controlled couch translations synchronized with the motion phantom. The method's performance is evaluated with five cases recorded during hypofractionated treatment and five from respiration-correlated CT simulation, using a root-mean-squared deviation (RMSD) of the baseline from the treatment planned position. Results: RMSD is reduced in all 10 cases, from a mean of 4.9 mm (range 2.7-9.4 mm) before correction to 1.7 mm (range 0.7-2.3 mm) after correction. Treatment time is increased {approx}5% relative to that for no corrections. Conclusions: This work illustrates the potential for reduction in baseline respiratory drift with periodic adjustments in couch position during treatment. Future treatment machine capabilities will enable the use of 'on-the-fly' couch adjustments during treatment.

60 APPLIED LIFE SCIENCES↗

TH-A-9A-01: Active Optical Flow Model: Predicting Voxel-Level Dose Prediction in Spine SBRT

Purpose: To predict voxel-level dose distribution and enable effective evaluation of cord dose sparing in spine SBRT. Methods: We present an active optical flow model (AOFM) to statistically describe cord dose variations and train a predictive model to represent correlations between AOFM and PTV contours. Thirty clinically accepted spine SBRT plans are evenly divided into training and testing datasets. The development of predictive model consists of 1) collecting a sequence of dose maps including PTV and OAR (spinal cord) as well as a set of associated PTV contours adjacent to OAR from the training dataset, 2) classifying data into five groups based on PTV's locations relative to OAR, two “Top”s, “Left”, “Right”, and “Bottom”, 3) randomly selecting a dose map as the reference in each group and applying rigid registration and optical flow deformation to match all other maps to the reference, 4) building AOFM by importing optical flow vectors and dose values into the principal component analysis (PCA), 5) applying another PCA to features of PTV and OAR contours to generate an active shape model (ASM), and 6) computing a linear regression model of correlations between AOFM and ASM.When predicting dose distribution of a new case in the testing dataset, the PTV is first assigned to a group based on its contour characteristics. Contour features are then transformed into ASM's principal coordinates of the selected group. Finally, voxel-level dose distribution is determined by mapping from the ASM space to the AOFM space using the predictive model. Results: The DVHs predicted by the AOFM-based model and those in clinical plans are comparable in training and testing datasets. At 2% volume the dose difference between predicted and clinical plans is 4.2±4.4% and 3.3±3.5% in the training and testing datasets, respectively. Conclusion: The AOFM is effective in predicting voxel-level dose distribution for spine SBRT. Partially supported by NIH/NCI under grant #R21CA161389 and a master research grant by Varian Medical System.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

SU-G-JeP1-15: Sliding Window Prior Data Assisted Compressed Sensing for MRI Lung Tumor Tracking

Purpose: Prior Data Assisted Compressed Sensing (PDACS) is a partial k-space acquisition and reconstruction method for mobile tumour (i.e. lung) tracking using on-line MRI in radiotherapy. PDACS partially relies on prior data acquired at the beginning of dynamic scans, and is therefore susceptible to artifacts in longer duration scan due to slow drifts in MR signal. A novel sliding window strategy is presented to mitigate this effect. Methods: MRI acceleration is simulated by retrospective removal of data from the fully sampled sets. Six lung cancer patients were scanned (clinical 3T MRI) using a balanced steady state free precession (bSSFP) sequence for 3 minutes at approximately 4 frames per second, for a total of 650 dynamics. PDACS acceleration is achieved by undersampling of k-space in a single pseudo-random pattern. Reconstruction iteratively minimizes the total variations while constraining the images to satisfy both the currently acquired data and the prior data in missing k-space. Our novel sliding window technique (SW-PDACS), uses a series of distinct pseudo-random under-sampling patterns of partial k-space – with the prior data drawn from a sliding window of the most recent data available. Under-sampled data, simulating 2 – 5x acceleration are reconstructed using PDACS and SW-PDACS. Three quantitative metrics: artifact power, centroid error and Dice’s coefficient are computed for comparison. Results: Quantitively metric values from all 6 patients are averaged in 3 bins, each containing approximately one minute of dynamic data. For the first minute bin, PDACS and SW-PDACS give comparable results. Progressive decline in image quality metrics in bins 2 and 3 are observed for PDACS. No decline in image quality is observed for SW-PDACS. Conclusion: The novel approach presented (SW-PDACS) is a more robust for accelerating longer duration (>1 minute) dynamic MRI scans for tracking lung tumour motion using on-line MRI in radiotherapy. B.G. Fallone is a co-founder and CEO of MagnetTx Oncology Solutions (under discussions to license Alberta bi-planar linac MR for commercialization).

60 APPLIED LIFE SCIENCES↗

Reduced meiotic recombination in rhesus macaques and the origin of the human recombination landscape

Characterizing meiotic recombination rates across the genomes of nonhuman primates is important for understanding the genetics of primate populations, performing genetic analyses of phenotypic variation and reconstructing the evolution of human recombination. Rhesus macaques (Macaca mulatta) are the most widely used nonhuman primates in biomedical research. We constructed a high-resolution genetic map of the rhesus genome based on whole genome sequence data from Indian-origin rhesus macaques. The genetic markers used were approximately 18 million SNPs, with marker density 6.93 per kb across the autosomes. We report that the genome-wide recombination rate in rhesus macaques is significantly lower than rates observed in apes or humans, while the distribution of recombination across the macaque genome is more uniform. These observations provide new comparative information regarding the evolution of recombination in primates.

59 BASIC BIOLOGICAL SCIENCES↗

Genome-Wide Association Study for Identifying Loci that Affect Fillet Yield, Carcass, and Body Weight Traits in Rainbow Trout (Oncorhynchus mykiss)

Fillet yield (FY, %) is an economically-important trait in rainbow trout aquaculture that affects production efficiency. Despite that, FY has received little attention in breeding programs because it is difficult to measure on a large number of fish and cannot be directly measured on breeding candidates. The recent development of a high-density SNP array for rainbow trout has provided the needed tool for studying the underlying genetic architecture of this trait. A genome-wide association study (GWAS) was conducted for FY, body weight at 10 (BW10) and 13 (BW13) months post-hatching, head-off carcass weight (CAR), and fillet weight (FW) in a pedigreed rainbow trout population selectively bred for improved growth performance. The GWAS analysis was performed using the weighted single-step GBLUP method (wssGWAS). Phenotypic records of 1447 fish (1.5 kg at harvest) from 299 full-sib families in three successive generations, of which 875 fish from 196 full-sib families were genotyped, were used in the GWAS analysis. A total of 38,107 polymorphic SNPs were analyzed in a univariate model with hatch year and harvest group as fixed effects, harvest weight as a continuous covariate, and animal and common environment as random effects. A new linkage map was developed to create windows of 20 adjacent SNPs for use in the GWAS. The two windows with largest effect for FY and FW were located on chromosome Omy9 and explained only 1.0–1.5% of genetic variance, thus suggesting a polygenic architecture affected by multiple loci with small effects in this population. One window on Omy5 explained 1.4 and 1.0% of the genetic variance for BW10 and BW13, respectively. Three windows located on Omy27, Omy17, and Omy9 (same window detected for FY) explained 1.7, 1.7, and 1.0%, respectively, of genetic variance for CAR. Among the detected 100 SNPs, 55% were located directly in genes (intron and exons). Nucleotide sequences of intragenic SNPs were blasted to the Mus musculus genome to create a putative gene network. The network suggests that differences in the ability to maintain a proliferative and renewable population of myogenic precursor cells may affect variation in growth and fillet yield in rainbow trout.

54 ENVIRONMENTAL SCIENCES↗

Block-structured, equal-workload, multi-grid-nesting interface for the Boussinesq wave model FUNWAVE-TVD (Total Variation Diminishing)

Abstract. We describe the development of a block-structured, equal-CPU-load (central processing unit), multi-grid-nesting interface for the Boussinesq wave model FUNWAVE-TVD (Fully Nonlinear Boussinesq Wave Model with Total Variation Diminishing Solver). The new model framework does not interfere with the core solver, and thus the core program, FUNWAVE-TVD, is still a standalone model used for a single grid. The nesting interface manages the time sequencing and two-way nesting processes between the parent grid and child grid with grid refinement in a hierarchical manner. Workload balance in the MPI-based (message passing interface) parallelization is handled by an equal-load scheme. A strategy of shared array allocation is applied for data management that allows for a large number of nested grids without creating additional memory allocations. Four model tests are conducted to verify the nesting algorithm with assessments of model accuracy and the robustness in the application in modeling transoceanic tsunamis and coastal effects.

Choi, Young-Kwang↗

Flexible linkers in CaMKII control the balance between activating and inhibitory autophosphorylation

The many variants of human Ca2+/calmodulin-dependent protein kinase II (CaMKII) differ in the lengths and sequences of disordered linkers connecting the kinase domains to the oligomeric hubs of the holoenzyme. CaMKII activity depends on the balance between activating and inhibitory autophosphorylation (on Thr 286 and Thr 305/306, respectively, in the human α isoform). Variation in the linkers could alter transphosphorylation rates within a holoenzyme and the balance of autophosphorylation outcomes. We show, using mammalian cell expression and a single-molecule assay, that the balance of autophosphorylation is flipped between CaMKII variants with longer and shorter linkers. For the principal isoforms in the brain, CaMKII-α, with a ~30 residue linker, readily acquires activating autophosphorylation, while CaMKII-β, with a ~200 residue linker, is biased towards inhibitory autophosphorylation. Our results show how the responsiveness of CaMKII holoenzymes to calcium signals can be tuned by varying the relative levels of isoforms with long and short linkers.

Life Sciences & Biomedicine - Other Topics↗

The Enzyme Activity and Substrate Specificity of Two Major Cinnamyl Alcohol Dehydrogenases in Sorghum ( Sorghum bicolor ), SbCAD2 and SbCAD4

Cinnamyl alcohol dehydrogenase (CAD) catalyzes the final step in monolignol biosynthesis, reducing sinapaldehyde, coniferaldehyde, and p-coumaraldehyde to their corresponding alcohols in an NADPHdependent manner. Because of its terminal location in monolignol biosynthesis, the variation in substrate specificity and activity of CAD can result in significant changes in overall composition and amount of lignin. Our in-depth characterization of two major CAD isoforms, SbCAD2 (Brown midrib 6 [bmr6]) and SbCAD4, in lignifying tissues of sorghum (Sorghum bicolor), a strategic plant for generating renewable chemicals and fuels, indicates their similarity in both structure and activity to Arabidopsis (Arabidopsis thaliana) CAD5 and Populus tremuloides sinapyl alcohol dehydrogenase, respectively. This first crystal structure of a monocot CAD combined with enzyme kinetic data and a catalytic model supported by site-directed mutagenesis allows full comparison with dicot CADs andelucidates the potential signature sequence for their substrate specificity and activity. Here, the L119W/G301F-SbCAD4 double mutant displayed its substrate preference in the order coniferaldehyde > p-coumaraldehyde > sinapaldehyde, with higher catalytic efficiency than that of both wild-type SbCAD4 and SbCAD2. As SbCAD4 is the only major CAD isoform in bmr6 mutants, replacing SbCAD4 with L119W/G301F-SbCAD4 in bmr6 plants could produce a phenotype that is more amenable to biomass processing.

09 BIOMASS FUELS↗