Search NASA⌕ Search

SEARCH · Search NASA

Results for “shuttle effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Defect Control in the Synthesis of 2 D MoS 2 Nanosheets: Polysulfide Trapping in Composite Sulfur Cathodes for Li–S Batteries

One of the inherent challenges with Li–S batteries is polysulfide dissolution, in which soluble polysulfide species can contribute to the active material loss from the cathode and undergo shuttling reactions inhibiting the ability to effectively charge the battery. Prior theoretical studies have proposed the possible benefit of defective 2 D MoS 2 materials as polysulfide trapping agents. Herein the synthesis and thorough characterization of hydrothermally prepared MoS 2 nanosheets that vary in layer number, morphology, lateral size, and defect content are reported. Here, the materials were incorporated into composite sulfur–based cathodes and studied in Li–S batteries with environmentally benign ether–based electrolytes. Through directed synthesis of the MoS 2 additive, the relationship between synthetically induced defects in 2 D MoS 2 materials and resultant electrochemistry was elucidated and described.

25 ENERGY STORAGE↗

Study of critical defects in ablative heat shield systems for the space shuttle

Experimental results are presented for a program conducted to determine the effects of fabrication-induced defects on the performance of an ablative heat shield material. Exposures representing a variety of space shuttle orbiter mission environments-humidity acoustics, hot vacuum and cold vacuum-culuminating in entry heating and transonic acoustics, were simulated on large panels containing intentional defects. Nondestructive methods for detecting the defects, were investigated. The baseline materials were two honeycomb-reinforced low density, silicone ablators, MG-36 and SS-41. Principal manufacturing-induced defects displaying a critical potential included: off-curing of the ablator, extreme low density, undercut (or crushed) honeycomb reinforcements, and poor wet-coating of honeycomb.

Miller, C. C.↗

Development of a reusable flightweight cryogenic storage system

A goldized-Kapton Superfloc multilayer insulation (MLI) coupled with an MLI purge and repressurization subsystem has been developed for use on reusable space vehicles. The subsystems were installed on an 87-inch diameter oblate spheroid liquid hydrogen tank and subjected to repeated space shuttle flight simulations to determine the effect upon system performance.

Walburn, A. B.↗

External tank gaseous oxygen line simulated lightning tests

Tests were made to evaluate the effects of lightning strikes on the shuttle external tank gaseous oxygen pressurization line. This line, designed to conduct gaseous oxygen may also act as a lightning conductor. Questions have been raised as to the potential hazard of this line as a lightning conductor with speculation as to the damage that might occur to the pressurization line, and the adjacent thermal protective surfaces, from a lightning strike. The region of investigation was from above the cone of the launch tower lightning protection to 15.24 km (50, 000 ft) altitude. Tests were performed on samples of thin wall stainless steel tubing filled with gaseous oxygen under simulated flight conditions. No specimen malfunctions occurred when the tests were conducted according to JSC specifications. Based on the JSC specifications and the results of these tests, it is concluded that a lightning strike will not cause a malfunction of the shuttle external tank gaseous oxygen line made of the representative material tested.

Smith, H. E.↗

Recent advances in structural technology for large deployable and erectable spacecraft

Ultra-low mass deployable and erectable truss structure designs for spacecraft are identified using computerized structural sizing techniques. Extremely slender strut proportions are shown to characterize minimum mass spacecraft which are designed for shuttle transport to orbit. Discrete element effects using a recently developed buckling theory for periodic lattice type structures are presented. An analysis of fabrication imperfection effects on the surface accuracy of four different antenna reflector structures is summarized. The tetrahedral truss has the greatest potential of the structures examined for application to accurate or large reflectors. A deployable module which can be efficiently transported is identified and shown to have significant potential for application to future antenna requirements. Investigations of erectable structure assembly are reviewed.

Bush, H. G.↗

Structural dynamics payload loads estimates

The development of a full scale payload integration method which reduces the cost of a load cycle and is capable of land long very large systems is discussed. The method solves the coupled booster/payload system equations and does not involve additional approximations as compared to the standard transient analysis. The method is cost effective and directly applicable to the shuttle payload design case.

Engels, R. C.↗

Introductory comments

Vibroacoustic and thermal environment data gathered from the first three flights of the space shuttle are presented. The characterization of the particulate, gaseous, and electromagnetic emissions associated with the shuttle flight is emphasized. Measurements of vehicle glow light emissions and material effects (mass loss) due to the low Earth environment interactions with the shuttle vehicle are presented.

Leger, L. J.↗

Advanced pointing systems for space astronomy

It is noted that the requirements on image stability are increasing, often at the same time that instrument external disturbances are increasing. A prime example of this is the pointing of large diameter optics from the Shuttle bay. To achieve cost-effective advanced pointing systems in the face of these problems, a system approach must be followed, one that encompasses a realistic assessment of requirements, the best possible detector technology, and a broad look at space vehicles and pointing systems that are available. By way of example, a rocket instrument for making measurements of the interstellar gas that uses a standard pointing system to achieve a spectral resolution of 2 x 10 to the 5th is described. It is noted that the use of a free-flying instrument avoids the high-frequency components that degrade the instrument resolution.

Delamere, W. A.↗

Gypsy moths and American dog ticks: Space partners

An experiment intended for the space shuttle and designed to investigate the effects of weightlessness and total darkness on gypsy moth eggs and engorged American dog ticks is described. The objectives are: (1) to reevaluate the effects of zero gravity on the termination of diapause/hibernation of embryonated gypsy moth eggs, (2) to determine the effect of zero gravity on the ovipositions and subsequent hatch from engorged female American dog ticks that have been induced to diapause in the laboratory, and (3) to determine whether morphological or biochemical changes occur in the insects under examination. Results will be compared with those from a similar experiment conducted on Skylab 4.

Hayes, D. K.↗

Analysis for leakage and rotordynamic coefficients of surface-roughened tapered annular gas seals

The present analysis calculates the leakage and rotor-dynamic coefficients for tapered annular gas seals whose rotor and stator have been subjected to different surface roughness treatments. The analysis is demonstrated for the effects of changes in the Space Shuttle Main Engine High Pressure Oxygen Turbopump's turbine interstage seal length, taper, clearance, and fluid prerotation. It is noted that changes in these parameters generally resulted in major changes in leakage and rotordynamic coefficients.

Nelson, C. C.↗

Numerical computation of space shuttle orbiter flow field

The complete inviscid viscous real gas flow around the Space Shuttle Orbiter was computed. Real gas effects are important in predicting the reentry environment around the Orbiter because the high temperatures within the shock layer cause the air to dissociate and ionize, thus invalidating the perfect gas assumption. It is shown that real gas effects has a significant influence on the Orbiter aerodynamics. The approach utilizes a time dependent Navier-Stokes code to compute the subsonic nose portion of the flow field. This nose solution provides the initial conditions for the parabolized Navier-Stokes (PNS) code.

Tannehill, J. C.↗

An optical communication link on the Shuttle

A communication link for the transfer of data between the crew cabin and payload bay of the Shuttle is proposed. The configuration of the system, which is to transmit data optically through the Shuttle cabin window, is described. The effects of temperature cycling and cosmic radiation on optical fibers, the cable, connectors, and lenses, and of vibrations during a mission on the alignment of collimating lenses at the window are investigated. Consideration is given to determining the optimum design for the optical fiber and the optimum system operation wavelength for transmission through the aft Orbiter window and the payload environment.

Grady, Jane L.↗

Evaluation of the resiliency characteristics of several candidate Solid Rocket Booster O-ring materials

Resiliency tests have been conducted in order to evaluate O-ring sealing response in the revised Space Shuttle SRBs, giving attention to the effects of temperature and gap-opening rates. Additional testing was conducted to ascertain O-ring responses to simulated SRB field-joint deflections. All tests employed a face-seal fixture mounted on a servohydraulic apparatus. The Viton candidate O-ring material tracked the gap-opening rate better at higher temperatures and lower gap-opening rates; it was also the only material inert to the calcium grease employed. Heaters must be used to maintain the 70 F minimum temperature at which the Viton O-ring will track the required gap opening rate.

Lach, C. L.↗

In-flight simulation at the NASA Dryden Flight Research Facility

An account of the in-flight simulation at the Dryden Flight Research Facility is presented and various aircraft and tests performed are discussed. In-flight simulation has been utilized for a variety of flying quality investigations including low-lift-to-drag ratio approach characteristics for vehicles like the X-15, the lifting bodies, and the Space Shuttle. Consideration is given to the effects of time delays on controllability of aircraft with digital flight-control systems, flight control systems for such aircraft as the X-29, and the causes and cures of pilot-induced oscillation in diverse aircraft.

Shafer, Mary F.↗

SSME testing technology at the John C. Stennis Space Center

An effective capability for testing the Space Shuttle Main Engine is described. The test complex utilizes a number of sophisticated test stands, test support facilities, and control centers to conduct development testing and flight acceptance testing at both nominal and off-nominal conditions.

Kynard, Mike↗