Search NASA⌕ Search

SEARCH · Search NASA

Results for “solvent effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Heterogeneous hydroformylation of alkenes by Rh-based catalysts

Heterogeneously catalyzed hydroformylation reactions avert the problems of separation in homogeneous reactions, reduce the discharge of phosphorus-containing wastes, and prevent the loss of precious metals. This review summarizes the developments of catalysts for heterogeneous hydroformylation in the last decade and proposes potential modification methods for future improvements. The hydroformylation properties of different reactants are compared in order to emphasize the fact that various olefins face unique challenges. The hydroformylation of ethylene requires the enhancement of catalytic activity and chemoselectivity, whereas that of propylene needs improvements in both chemoselectivity and regioselectivity. The hydroformylation of longer-chain olefins and styrene seeks further improvement in regioselectivity. The catalytic properties of activity, selectivity, and stability can be tuned through electronic effects (bimetallic effects, phosphine ligands, and single-atom catalysts), steric hindrance (encapsulation structures, diphosphine ligands, and local functional groups), and reaction condition optimization (temperature, pressure, and solvents). Furthermore, the understanding of these effects is critical in future catalyst design for heterogeneous hydroformylation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Large-Grained Cylindrical Block Copolymer Morphologies by One-Step Room-Temperature Casting

We report a facile method of ordering block copolymer (BCP) morphologies in which the conventional two-step casting and annealing steps are replaced by a single-step process where microphase separation and grain coarsening are seamlessly integrated within the casting protocol. This is achieved by slowing down solvent evaporation during casting by introducing a non-volatile solvent into the BCP casting solution what effectively prolongs the duration of the grain-growth phase. We demonstrate the utility of this solvent evaporation annealing (SEA) method by producing well-ordered large molecular-weight BCP thin films in a total processing time shorter than 3 minutes without resorting to any extra laboratory equipment other than a basic casting-device i.e., spin- or blade-coater. By analyzing the morphologies of the quenched samples, we identify a relatively narrow range of polymer concentration in the wet film, just above the order-disorder concentration, to be critical for obtaining large-grained morphologies. This finding is corroborated by the analysis of the grain-growth kinetics of horizontally-oriented cylindrical domains where relatively large growth exponents (1/2) are observed, indicative of a more rapid defect-annihilation mechanism in the concentrated BCP solution than in thermally-annealed BCP melts. Furthermore, the analysis of temperature-resolved kinetics data allows us to calculate the Arrhenius activation energy of the grain-coarsening in this one-step BCP ordering process.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Identification of Possible Pathways for C–C Bond Formation during Electrochemical Reduction of CO 2 : New Theoretical Insights from an Improved Electrochemical Model

Here, we have carried out a periodic Kohn-Sham density functional theory investigation of the pathways by which carbon-carbon bonds could be formed during the electrochemical reduction of CO 2 on Cu(100) using a model that includes the effects of the electrochemical potential, solvent, and electrolyte. The electrochemical potential was set by relating the applied potential to the Fermi energy and then calculating the number of electrons required by the simulation cell for that specific Fermi energy. The solvent was included as a continuum dielectric, and the electrolyte was described using a linearized Poisson-Boltzmann model. The calculated potential of zero charge for a variety of surfaces agrees with experiment to within a mean average error of 0.09 V, thereby validating the assumptions of the model. Analysis of the mechanism for C–C bond formation revealed that at low-applied potential, C–C bond formation occurs through a CO dimer. However, at high applied potentials, a large activation barrier blocks this pathway; therefore, C–C bond formation occurs through reaction of adsorbed CHO and CO. Rate parameters determined from our calculations were used to simulate the kinetics of ethene formation during the electrochemical reduction of CO over a Cu(100) surface. An excellent match was observed between previously reported measurements of the partial current for ethene formation as a function of applied voltage and the variation in the partial current for C–C bond formation predicted by our microkinetic model. The electrochemical model reported here is simple, fairly easy to implement, and involves only a small increase in computational cost over calculations neglecting the effects of the electrolyte and the applied field. Therefore, it can be used to study the effects of applied potential and electrolyte composition on the energetics of surface reactions for a wide variety of electrochemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

H–D exchange between quercetin and solvent in the presence of Au{sup I} chloride complexes with DMSO: quantum chemical modeling

The pathways of H–D exchange between quercetin and solvent taking into account the effects of the medium are considered using quantum chemical calculations and the mechanism of selective H–D exchange reaction at the C(2′) position observed only in the presence of Au complexes is identified. It is shown that only the exchange processes in the A-ring have suffi- ciently low activation barriers. In the acidic and alkaline media, these processes occur at lower energies as compared with the reaction in the neutral system, which qualitatively agrees with the published experimental data. It was shown that the Au{sup I} chloride complex with DMSO is able to react with the C–H bond at the C(2′) position by the mechanism of electrophilic substitution under mild conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

A Kinetic Model for Dissolution of Zinc Oxide Powder Obtained from Waste Alkaline Batteries in Sodium Hydroxide Solutions

The determination of individual dissolution behaviors of zinc and manganese in waste alkaline battery powders is an important subject from the points of the leaching yield, design of leaching reactor, and separation and recovery steps of hydrometallurgical process. In the current study, we investigated the dissolution kinetics of zinc oxide powder. Zinc oxide was obtained from waste alkaline batteries, and sodium hydroxide solutions were used as solvent. In the experiments, the effects of solution concentration, reaction temperature, stirring speed, solid-to-liquid ratio, and particle size on the dissolution of zinc oxide were investigated. It was demonstrated that the dissolution increased with the increasing concentration, reaction temperature, and stirring speed, and with the decreasing solid-to-liquid ratio and particle size. In consequence of the kinetic analysis performed, it was found that the dissolution kinetics of zinc powder obeyed the Avrami model. Activation energy for the process was determined to be 19.42 kJ/mol. Zinc ions in the resulting solution after dissolution process was recovered in the form of hydroxy-carbonate product by precipitation method. Zinc oxide was produced by isothermal decomposition of hydroxy-carbonate product.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Exploitation of Pore Structure for Increased CO 2 Selectivity in Type 3 Porous Liquids

CO 2 capture requires materials with high adsorption selectivity and an industrial ease of implementation. To address these needs, a new class of porous materials was recently developed that combines the fluidity of solvents with the porosity of solids. Type 3 porous liquids (PLs) composed of solvents and metal–organic frameworks (MOFs) offer a promising alternative to current liquid carbon capture methods due to the inherent tunability of the nanoporous MOFs. However, the effects of MOF structural features and solvent properties on CO 2 –MOF interactions within PLs are not well understood. Herein experimental and computational data of CO 2 gas adsorption isotherms were used to elucidate both solvent and pore structure influences on ZIF-based PLs. The roles of the pore structure including solvent size exclusion, structural environment, and MOF porosity on PL CO 2 uptake were examined. A comparison of the pore structure and pore aperture was performed using ZIF-8, ZIF-L, and amorphous-ZIF-8. Adsorption experiments here have verified our previously proposed solvent size design principle for ZIF-based PLs (1.8× ZIF pore aperture). Furthermore, the CO 2 adsorption isotherms of the ZIF-based PLs indicated that judicious selection of the pore environment allows for an increase in CO 2 selectivity greater than expected from the individual PL components or their combination. This nonlinear increase in the CO 2 selectivity is an emergent behavior resulting from the complex mixture of components specific to the ZIF-L + 2'-hydroxyacetophenone-based PL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Nonadiabatic rate constants for proton transfer and proton-coupled electron transfer reactions in solution: Effects of quadratic term in the vibronic coupling expansion

Rate constant expressions for vibronically nonadiabatic proton transfer and proton-coupled electron transfer reactions are presented and analyzed. The regimes covered include electronically adiabatic and nonadiabatic reactions, as well as high-frequency and low-frequency proton donor-acceptor vibrational modes. These rate constants differ from previous rate constants derived with the cumulant expansion approach in that the logarithmic expansion of the vibronic coupling in terms of the proton donor-acceptor distance includes a quadratic as well as a linear term. The analysis illustrates that inclusion of this quadratic term in the framework of the cumulant expansion framework may significantly impact the rate constants at high temperatures for proton transfer interfaces with soft proton donor-acceptor modes that are associated with small force constants and weak hydrogen bonds. The effects of the quadratic term may also become significant in these regimes when using the vibronic coupling expansion in conjunction with a thermal averaging procedure for calculating the rate constant. In this case, however, the expansion of the coupling can be avoided entirely by calculating the couplings explicitly for the range of proton donor-acceptor distances sampled. The effects of the quadratic term for weak hydrogen-bonding systems are less significant for more physically realistic models that prevent the sampling of unphysical short proton donor-acceptor distances. Additionally, the rigorous relation between the cumulant expansion and thermal averaging approaches is clarified. In particular, the cumulant expansion rate constant includes effects from dynamical interference between the proton donor-acceptor and solvent motions and becomes equivalent to the thermally averaged rate constant when these dynamical effects are neglected. This analysis identifies the regimes in which each rate constant expression is valid and thus will be important for future applications to proton transfer and proton-coupled electron transfer in chemical and biological processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

In Situ Insights into Enhanced Cooperative Ligand Exchange Kinetics via Solvent-Induced Restacking in a 2D Metal–Organic Framework

Understanding the reaction kinetics at catalytically active sites is crucial for integrating catalytic two-dimensional (2D) materials into industrial processes. This study focuses on in situ observation of ligand exchange kinetics and solvent-assisted structural restacking transition in the 2D paddle wheel-based MOF [Cu 2 (dttc) 2 ] n (DUT-134(Cu), dttc = dithieno[3,2-b:2′,3′- d]thiophene-2,6-dicarboxylate). The ligand exchange process, involving the replacement of dimethylformamide (DMF) with nitriles such as acetonitrile (ACN), pentanenitrile, and heptanenitrile, was investigated using advanced in situ characterization techniques with high temporal resolution, including powder X-ray diffraction and Raman spectroscopy. The larger analytes exhibited reduced exchange rates, consistent with enhanced steric hindrance and greater diffusion constraints. Interestingly, the study revealed that the exchange of DMF with ACN induces a structural transition to higher symmetry within few seconds, a transition from AB to AA stacking mode of the layers, and a widening of the interlayer distance. Crucially, this structural transition dramatically accelerates the solvent exchange process through cooperative effects, offering critical advantages for catalytic applications. Notably, the reverse exchange from ACN to DMF proceeds more slowly and does not reverse the structural changes, but a new phase is formed with preserved AA stacking. By isotope labeling of linker molecules in combination with two complementary theoretical vibrational simulation methods, the precise assignment of Raman bands and the vibrational modes associated with the ligand exchange process could be achieved. These pioneering insights into the dynamic behavior of 2D MOFs, coupled with ligand exchange, establish a highly promising and transformative approach to achieving enhanced tunability and responsiveness in future catalytic applications.

Layers↗
DOE OSTI2023

One-pot generation of lignin microspheres and digestible substrate with a polyol-DES pretreatment in high solid loading

Previous lignin microspheres (LMS) preparation needs multiple steps with very low yield and high cost. Herein, we developed a high-solid deep eutectic solvent (DES) pretreatment for an effective lignin fractionation and enzymatic saccharification of moso bamboo under mild temperature (110 °C) with high-solid loading. Lignin was significantly removed from the plant cell wall, and cellulose properties (e.g., crystallinity and degree of polymerization) were also altered during the pretreatment. As a result, the enzymatic digestibility of the pretreated bamboo was dramatically increased. Uniform micro-spherical lignin was directly produced from the pretreatment system, and its particle size could be regulated by controlling the solid loadings and pretreatment temperatures. The lignin microspheres formation mechanism was investigated by analyzing the lignin's size distribution, molecular weight distribution, chemical structure, and hydrophobicity. The DES showed excellent recyclability, and the recycled DES could still remove 42.78% lignin even after 7th circulation associated with 100% glucan saccharification. Further, the mass balance based on 1000 g biomass showed that 196.28 g LMS was directly recovered, which exhibited a high RhB adsorption. Besides, 404.91 g glucose and 36.67 g xylose were obtained after the enzymatic saccharification process. Specifically, GAPI analysis exhibited a near total green and yellow portions of the pictogram, indicating our DES process was green enough to make this biorefinery sustainable. Overall, the proposed DES generated synergistic productions of digestible solid and LMS which could contribute to establish a green and sustainable biorefinery sequence with diverse outputs in one pot.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Examination of the Radiolytic Stability of the GENIORS Solvent

The INL radiolysis test loop system has been employed to evaluate the effects of gamma radiolysis the stability and performance of the GENIORS solvent extraction process. This report describes details and results of the experiments performed and documents completion of milestone M3FT-21IN030101024 “Testing of Radiolytic Stability of m-TDDGA Based Solvent at INL”. The purpose of the proposed dynamic irradiation tests to be performed is to evaluate the radiolytic stability of the GENIORS process solvent for An/Ln recovery under process-like conditions. Recent research efforts within the European Union GENIORS project have focused upon demonstrating additional process improvements. These improvements include simplification of the solvent composition, use of reagents composed of only C, H, O, and N atoms (the CHON principle), identification of a diglycolamide derivative with more favorable Pu loading behavior, and use of an aqueous soluble stripping reagent that is not sulfonated. As a result, a new solvent utilizing dimethyl-N,N,N’,N’-tetradecyl-diglycolamide (cis-mTDDGA) as the An/Ln extractant and the aqueous soluble 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4yl]-pyridine (PTD) as the An/Ln stripping reagent was proposed. The impact of gamma radiolysis upon the efficacy of the GENIORS process solvent was evaluated by determining the americium, europium, and cerium distribution ratios as a function of absorbed dose. The measured distribution ratios demonstrated that the GENIORS solvent did undergo radiolytic degradation. However, at absorbed doses corresponding to realistic process conditions, the extraction and stripping performance of the solvent remains acceptable. Compositional analysis of the irradiated solvent revealed a decrease in the concentration of cis-mTDDGA, which is consistent with the observed changes in metal distribution ratios as a function of absorbed dose.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2020

Direct Evidence of Graphene-Induced Molecular Reorientation in Polymer Films

For the first time, direct evidence of graphene-induced molecular reorientation in polymer films using polarization modulated infrared reflection absorption spectroscopy (PMIRRAS) are presented. By creating favorable electrostatic interactions, graphene-polymer interfaces can be controlled by varying polymer and solvent composition. After trans of unmodified graphene from copper onto a polymer substrate, polymer chain rearrangement relative to the orientation at the polymer-copper interface is observed using PM-IRRAS. Transfer success is characterized using both optical transmission measurements and Raman spectroscopy to quantify the transfer fidelity, i.e. graphene coverage fraction. Taken together, oxygencontaining poly(ethylene-co-vinyl acetate) shows more polymer chain rearrangement and better graphene coverage compared to oxygen-free polyethylene. Polymer composition seems to dominate graphene-polymer interactions while solvent choice has a smaller effect on transfer quality. These results are the first direct measurement of this effect and point towards the possibility of engineering graphene-polymer interactions for specific applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Understanding the Active Site Structures and Achieving Catalytic Activity Tuning of Atomically Dispersed FeN 4 Sites for Oxygen Reduction Reaction

Atomically dispersed Fe–—N—C catalysts with high oxygen reduction reaction (ORR) activity have attracted great attention since the last decade. Due to comparable ORR activity and low material cost, they are promising platinum group metal (PGM)-free catalysts that can replace the commercialized Pt/C materials; furthermore, it can facilitate the efficiency of the fuel cell technologies and mitigate dependence on fossil fuels. Great advancements have been made to experimentally optimize the synthesis approach of the Fe–—N—C catalysts, enhance the ORR activity, and improve the catalyst stability. Similarly, recent theoretical studies also provide enriched understanding of the active site structures, properties, and reaction mechanisms. In this review, discussions are made upon utilizing combined experimental and computational spectroscopy to reveal the active site structures, employing mechanistic studies to investigate reaction thermodynamics and kinetics, as well as developing scaling relationships to assist the design and development of future PGM-free catalyst materials. Furthermore, recent advances in studying Fe–—N—C catalysts utilizing electrified surface models and explicit solvation models are also discussed. Not only can these aspects improve the accuracy of theoretical simulation and predictions but also deepen the understanding of the catalyst properties and reaction mechanisms under the effect of surface charges and solvent molecules.

Fe single-atom catalysts↗
DOE OSTI2013

A facile mixed-solvothermal route to γ-Bi{sub 2}MoO{sub 6} nanoflakes and their visible-light-responsive photocatalytic activity

Graphical abstract: γ-Bi2MoO6 nanoflakes were successfully synthesized by a mixed-solvothermal process. The visible-light-responsive photocatalytic activities of the obtained γ-Bi2MoO6 nanoflakes were evaluated by photodegradation of Rhodamie B under visible light. The high degradation efficiency of RhB was attributed to the good crystallization and flake-like morphology of γ-Bi2MoO6 nanostructures, which is in accord with the photocurrent result. - Highlights: • γ-Bi{sub 2}MoO{sub 6} nanoflakes were obtained by a mixed-solvothermal process with SDBS as surfactant. • The photocurrent test was taken to characterize the photocatalytic activity. • The nanopowders exhibit high efficient photocatalytic activity under visibile-light irradiation. - Abstract: γ-Bi{sub 2}MoO{sub 6} nanoflakes were successfully synthesized by a mixed-solvothermal process with SDBS involved in the reaction. The as-prepared γ-Bi{sub 2}MoO{sub 6} was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV–vis absorption spectroscopy. The effect of different ratio of solvents on the resulting products was investigated. The visible-light-responsive photocatalytic activities of the obtained γ-Bi{sub 2}MoO{sub 6} nanoflakes were evaluated by photodegradation of Rhodamie B under visible light (λ > 400 nm). The high degradation efficiency of RhB was attributed to the good crystallization and flake-like morphology of γ-Bi{sub 2}MoO{sub 6} nanostructures, which is in accord with the photocurrent result.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Electronic Origin and Kinetic Feasibility of the Lattice Oxygen Participation During the Oxygen Evolution Reaction on Perovskites

Density functional theory is employed to investigate the electronic origin and feasibility of surface lattice oxygen (O surf ) participation during the oxygen evolution reaction (OER) on perovskites. O surf participation occurs via the nonelectrochemical pathway in which adsorbed atomic oxygen (O*) diffuses from the transition-metal site to the oxygen site, and then O surf shifts out of the surface plane to react with O* to form O surf –O* and a surface oxygen vacancy. The different thermodynamic driving forces of O surf participation on LaMO 3-δ (M = Ni, Co, and Cu) are explained by the changes in the oxidation state of the transition-metal site throughout the reaction. We show that Osurf participation on LaNiO 3 cannot be hindered by Osurf protonation in the OER potential range. By including the coverage effect and utilizing the implicit solvent model, we finally show that lattice oxygen mechanism is more feasible than the conventional mechanism for OER on LaNiO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Selective Oxidative Coupling of Amines Using Mesoporous MoO x Catalysts

In this paper, we report a synthesis method for highly porous molybdenum oxide via molybdenum-oxo cluster formation under acidic conditions providing extraordinary stability. Synthesized materials indicate higher valences of molybdenum as compared to the commercial standards as verified through X-ray photoelectron spectroscopy, electron paramagnetic resonance spectroscopy, and ultraviolet–visible spectroscopy. The formation of a 91% orthorhombic molybdenum oxide bulk structure was verified through powder X-ray diffraction analysis. The effect of the hydrogen peroxide solvent system was optimized to obtain pore diameters as big as 17.4 nm and pore volumes as high as 0.168 cm 3 /g. These materials serve as great catalysts providing excellent yields of imine via amine coupling, having first-order kinetics with a turnover number as good as 27.93 with a slight decrease to 22.04 even after the fourth cycles. Surface hydroxyl species on the catalyst aid in the solid acid catalysis to jump-start the reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Tracking Physicochemical Conditions of Evaporite Deposition by Stable Magnesium Isotopes: A Case Study of Late Permian Langbeinites

Magnesium isotopic compositions of evaporite deposits may record information concerning brine evolution during deposition. We report Mg isotopic values (δ 26 MgDSM3) measured from an evaporite deposit of langbeinite (K 2 Mg 2 (SO 4 ) 3 ) found in the Permian Salado Formation. We used these data to model Mg isotope fractionation between langbeinite and its parent brine. In addition, both measured and theoretical results are used to estimate precipitation temperature and interpret depositional environment. The Salado langbeinite δ 26 Mg values are relatively low and fall within a relatively narrow range (–4.12 ± 0.03‰ to -3.81 ± 0.07‰). Equilibrium fractionation factors between langbeinite and aqueous Mg 2+ solutions were calculated using quantum chemical density functional theory. All computations were performed at the B3LYP/6-31 + G(d,p) level. Solvation effects were addressed using a solvent model (“water-droplet” approach) and mineral structures were investigated using volume variable cluster models (VVCM). The equilibrium Mg isotopic fractionation factors α between langbeinite and model brine solution we obtained are 1.0005, 1.0004, and 1.0003 (Δ 26 Mg langb-water ≈10 3 lnα = 0.473‰, 0.390‰, and 0.322‰) at 10°C, 25°C, and 40°C, respectively. These relatively large equilibrium fractionation factors indicate significant Mg isotope fractionation between langbeinite and its parent brine during precipitation, as langbeinite preferentially incorporates the heavier 26 Mg and 25 Mg isotopes. Rayleigh distillation modeling of the Salado langbeinite's relatively light Mg isotopic composition requires δ 26 Mg DSM3 values of -4‰ for the parent brine. Models favor a precipitation temperature as high as 40°C under equilibrium conditions. Finally, potential disequilibrium precipitation conditions suggested by Mg isotopic data also imply rapid deposition in a hot, arid sedimentary environment prevailing in the southwestern U.S. during the Late Permian.

58 GEOSCIENCES↗
DOE OSTI2014

Cluster formation in fluids with competing short-range and long-range interactions

We investigate the low density behaviour of fluids that interact through a short-ranged attraction together with a long-ranged repulsion (SALR potential) by developing a molecular thermodynamic model. The SALR potential is a model of effective solute interactions where the solvent degrees of freedom are integrated-out. For this system, we find that clusters form for a range of interaction parameters where attractive and repulsive interactions nearly balance, similar to micelle formation in aqueous surfactant solutions. We focus on systems for which equilibrium behaviour and liquid-like clusters (i.e., droplets) are expected, and find in addition a novel coexistence between a low density cluster phase and a high density cluster phase within a very narrow range of parameters. Moreover, a simple formula for the average cluster size is developed. Based on this formula, we propose a non-classical crystal nucleation pathway whereby macroscopic crystals are formed via crystal nucleation within microscopic precursor droplets. We also perform large-scale Monte Carlo simulations, which demonstrate that the cluster fluid phase is thermodynamically stable for this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗