Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Mechanical failure and glass transition in metallic glasses

The current majority view on the phenomenon of mechanical failure in metallic glasses appears to be that it is caused by the activity of some structural defects, such as free-volumes or shear transformation zones, and the concentration of such defects is small, only of the order of 1%. However, the recent results compel us to revise this view. Through molecular dynamics simulation it has been shown that mechanical failure is the stress-induced glass transition. According to our theory the concentration of the liquid-like sites (defects) is well over 20% at the glass transition. We suggest that the defect concentration in metallic glasses is actually very high, and percolation of such defects causes atomic avalanche and mechanical failure. In this article we discuss the glass transition, mechanical failure and viscosity from such a point of view.

36 MATERIALS SCIENCE↗

Aging of Nanocarbons in Ambient Conditions: probable metastability of carbon nanotubes

We studied the physicochemical properties of several commercially available single- and multi-walled carbon nanotubes (SWNTs and MWNTs) and fullerenes stored in normal ambient conditions for 24 months. We found that SWNTs exhibit a trend of decreasing surface area and pore volume up to 7 to 15 months but then stabilized, no longer being impacted by sample age or outgassing temperatures. Using X-ray Photoelectron Spectroscopy, we also observed a trend of decreasing surface oxygen in all samples from the beginning with much lower % oxygen observed after 12 to 15 months of aging under ambient conditions. The surface oxygen then stabilized for the duration of this study. There was also evidence that the total structural-defect concentration, estimated from Raman spectroscopy, was somehow lowered during the aging process. The decrease in surface oxygen is an unexpected phenomenon because most other carbons, such as activated carbons or carbon molecular sieves, either oxidize or remain unaffected by age. We believe that nanocarbons are meta-stable materials (in pseudo-thermodynamic equilibrium), and that their aging in ambient conditions makes them more thermodynamically stable with fixed properties. This new information about the properties of nanocarbons should be further explored as it can help resolve some of the conflicting reports such as those about the environmental impacts of nanomaterials.

36 MATERIALS SCIENCE↗

Effects of neutron irradiation and post-irradiation annealing on the microstructure of HT-UPS stainless steel

Microstructural changes resulted from neutron irradiation and post-irradiation annealing in a high-temperature ultra-fine precipitate strengthened (HT-UPS) stainless steel were characterized using transmission electron microscopy (TEM) and atom probe tomography (APT). Three HT-UPS samples were neutron-irradiated to 3 dpa at 500 °C, and after irradiation, two of them were annealed for 1 h at 600 °C and 700 °C, respectively. Frank dislocation loops were the dominant defect structure in both the as-irradiated and 600 °C post-irradiation-annealed (PIAed) samples, and the loop sizes and densities were similar in these two samples. Unfaulted dislocation loops were observed in the 700 °C PIAed sample, and the loop density was greatly reduced in comparison with that in the as-irradiated sample. Nano-sized MX precipitates were observed under TEM in the 700 °C PIAed sample, but not in the 600 °C PIAed or the as-irradiated samples. The titanium-rich clusters were identified in all three samples using APT. The post-irradiation annealing (PIA) caused the growth of the Ti-rich clusters with a stronger effect at 700 °C than at 600 °C. The irradiation caused elemental segregations at the grain boundary and the grain interior, and the grain boundary segregation behavior is consistent with observations in other irradiated austenitic steels. Here, APT results showed that PIA reduced the magnitude of irradiation induced segregations.

36 MATERIALS SCIENCE↗

Microstructural evolution of NF709 austenitic stainless steel under in-situ ion irradiations at room temperature, 300, 400, 500 and 600 °C

Irradiation induced microstructural changes in the NF709 austenitic stainless steel were investigated under 1 MeV Kr ion irradiations to a dose of 3 dpa at room temperature (RT), 300, 400, 500 and 600 °C, and a dose of 20 dpa at RT. The irradiation-induced defects and the stability of precipitates were characterized with transmission electron microscopy (TEM). Frank dislocation loops were observed in all the irradiated samples, and the loop sizes were much larger at 600 °C than those at lower temperatures. “Raft” defect structures, formed through self-alignment of small dislocation loops, were also observed in all irradiated samples. M23C6 precipitates were amorphorized under irradiations at RT and 300 °C, but remained to be crystalline at 400 °C and above. MX precipitates were stable under irradiations at RT up to 20 dpa, and at temperatures below 600 °C to 3 dpa. At 600 °C, some MX precipitates were observed to dissolve during in-situ irradiation, suggesting possible precipitate instability at this irradiation temperature.

36 MATERIALS SCIENCE↗

Processing of tungsten through electron beam melting

Additive manufacturing (AM) presents a new design paradigm for the manufacture of engineering materials through the layer-by-layer approach combined with welding theory. In the instance of difficult to process materials such as tungsten and other refractory metals, AM offers an opportunity for radical redesign of critical components for next-generation energy technologies including fusion. In this work, electron beam powder bed fusion (EB-PBF) is applied to process pure tungsten to study the influence of process parameters on the defect density of the material. Here, an in-situ image analysis algorithm is applied to pure tungsten for the first time, and is used to visualize the defect structure in AM tungsten. Finally, a cracking mechanism for AM tungsten is proposed, and suggestions for suppression of cracks in pure tungsten are offered.

36 MATERIALS SCIENCE↗

Microstructural changes of proton irradiated Hastelloy-N and in situ micropillar compression testing of one single grain at different local damage levels

Here, in situ micropillar compression was used to study the deformation of proton-irradiated Hastelloy-N at different damage levels. Multiple pillars were prepared from a single domain along the cross-section of 2.5 MeV proton-irradiated Hastelloy-N. Depending on the location of micropillars, the critical resolved shear stress was obtained as a function of local damage levels. Such an approach eliminates the variation of yield stress due to the difference in the Schmid factor. Microstructural characterization showed that irradiation hardening is contributed by complicated defect structures, including (a) dislocation loops with many in corduroy-like alignments, (2) dislocations pile up, and (3) Cottrell atmosphere. Silicon atoms are found to segregate at dislocation lines and loops and form complicated Cottrell cloud patterns. The critical resolved shear stress, $t_{crss}$, and hardening exponents were both extracted as a function of displacements per atom values up to 2.3. There was a 60% increase in $t_{crss}$ at the highest damage level.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Early self-organization of fission gas bubble superlattice formation in neutron-irradiated monolithic U-10Mo fuels

Self-organization of defect superlattices in far-from-equilibrium systems presents a promising way to mitigate swelling concerns in nuclear materials. The gas bubble superlattice (GBS) is a highly ordered, three-dimensional complex defect structure that can retain fission gasses in Uranium-Molybdenum (U-Mo) fuels. Transmission electron microscopy (TEM) investigation of monolithic U-10Mo fuel irradiated to 1.15 × 10 21 fissions/cm 3 and 1.30 × 10 21 fissions/cm 3 revealed that early-stage ordering preferentially occurs at the grain boundaries (GB) and that the critical bubble size for complete ordering is ~3 nm. Once formed at the GB, the GBS extends towards the grain interior; however, the spread in distance from the GB varies likely depending on the type and strength of the GB sink. TEM results also showed a possible correlation between the growth and evolution of the intragranular disordered bubbles and large dislocation networks. The fission product distribution in and outside of the GBS was also investigated confirming the presence of xenon in the GBS, as well as other fission products including cesium, barium, lanthanum, and cerium.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The role of UC inclusions in the development of fission gas bubble superlattice neutron-irradiated monolithic U-10Mo fuels

Uranium Carbide (UC) inclusions are the most prevalent impurities in Uranium-Molybdenum (U-Mo) fuel and are considered undesirable because they could potentially affect fuel performance. This work revealed that, like grain boundaries (gBs), UC inclusions could help facilitate the formation of the fission gas bubble superlattice (GBS). The GBS is a highly organized complex defect structure that can effectively store fission gases, thereby inhibiting fuel swelling. Transmission electron microscopy (TEM) showed that GBS self-organization can initiate at the UC/U-Mo interfaces in U-10Mo fuel irradiated to low fission density. Furthermore, this study also revealed that the UC boundary in U-10Mo irradiated to low fission density is wavy and periodic in morphology and that GBS formation is semi-coherent with the UC boundary. Because the initiation of GBS occurs at gBs and UC/U-Mo interfaces, the fission gas inventory is always highest at those regions compared to the U-Mo grain interior. Consequently, at higher fission densities, it is likely that high burnup structure (HBS) development via grain refinement will begin at gBs and UC/U-Mo interfaces.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Lithium diffusion in Li 4 Ti 5 O 12 at high temperatures

Synthesis of the spinel lithium titanate Li 4 Ti 5 O 12 by an alkoxide-free sol–gel method is described. This method yields highly pure and crystalline Li 4 Ti 5 O 12 samples at relatively low temperature (850 °C) and via short thermal treatment (2 h). 6 Li magic angle spinning nuclear magnetic resonance (MAS NMR) measurements on these samples were carried out at high magnetic field (21.1 T) and over a wide temperature range (295–680 K). The temperature dependence of the chemical shifts and integral intensities of the three 6 Li resonances demonstrates the migration of lithium ions from the tetrahedral 8a to the octahedral 16c sites and the progressive phase transition from a spinel to a defective NaCl-type structure. This defective structure has an increased number of vacancies at the 8a site, which facilitate lithium diffusion through 16c → 8a → 16c pathways, hence providing an explanation for the reported increase in conductivity at high temperatures. Molecular dynamics simulations of the spinel oxides Li 4+x Ti 5 O 12 , with 0 ≤ x ≤ 3, were also performed with a potential shell model in the temperature range 300–700 K. Finally, the simulations support the conclusions drawn from the NMR measurements and show a significant timescale separation between lithium diffusion through 8a and 16c sites and that out of the 16d sites.

Environmental Molecular Sciences Laboratory↗

Influence of physical activity on tibial bone material properties in laying hens

Laying hens develop a type of osteoporosis that arises from a loss of structural bone, resulting in high incidence of fractures. In this study, a comparison of bone material properties was made for lines of hens created by divergent selection to have high and low bone strength and housed in either individual cages, with restricted mobility, or in an aviary system, with opportunity for increased mobility. Improvement of bone biomechanics in the high line hens and in aviary housing was mainly due to increased bone mass, thicker cortical bone and more medullary bone. However, bone material properties such as cortical and medullary bone mineral composition and crystallinity as well as collagen maturity did not differ between lines. However, bone material properties of birds from the different type of housing were markedly different. The cortical bone in aviary birds had a lower degree of mineralization and bone mineral was less mature and less organized than in caged birds. Here, these differences can be explained by increased bone turnover rates due to the higher physical activity of aviary birds that stimulates bone formation and bone remodeling. Multivariate statistical analyses shows that both cortical and medullary bone contribute to breaking strengthThe cortical thickness was the single most important contributor while its degree of mineralization and porosity had a smaller contribution. Lastly, bone properties had poorer correlations with mechanical properties in cage birds than in aviary birds presumably due to the greater number of structural defects of cortical bone in cage birds.

59 BASIC BIOLOGICAL SCIENCES↗

Moderate pressure synthesis of rare earth nickelate with metal-insulator transition using polymeric precursors

Rare earth nickelates exhibit a reversible metal-semiconductor phase transition that is, in the infrared range, responsible for a thermo-optical contrast. The state of the art synthesis of these compounds usually requires high oxygen pressure to stabilize Ni in the oxidation state 3{sup +}. In this work, using polymeric precursor associated with moderate pressure annealing, we show that it is possible to obtain fully oxidized rare earth nickelate with metal-insulator transition. Using thermogravimetric analysis, X-ray diffraction and transmission electronic microscopy we compare different samples synthesized at different oxygen pressures and demonstrate their structural similarity. Thermo-optical properties were measured, in the infrared range, using reflectance measurements and confirmed the metal-insulator transition at 60 {sup o}C in both samples.TEM observations lead to the conclusion that the structure commonly obtained at 175 bar is perfectly observed in the 20 bar sample without major structural defects. The two samples exhibit a thermochromic behavior and thermo-optical properties of the two samples are equivalent. - Graphical Abstract: Thermochromic behavior of Nd{sub 0.3}Sm{sub 0.7}NiO{sub 3} samples annealed under 20 and 175 bar at 278 and 373 K.

36 MATERIALS SCIENCE↗

Microwave-assisted hydrothermally grown epitaxial ZnO films on Left-Pointing-Angle-Bracket 1 1 1 Right-Pointing-Angle-Bracket MgAl{sub 2}O{sub 4} substrate

In this report, epitaxial ZnO films were grown on Left-Pointing-Angle-Bracket 1 1 1 Right-Pointing-Angle-Bracket MgAl{sub 2}O{sub 4} single crystal substrates using Microwave Assisted Hydrothermal (MAH) method with microwave radiation heating (2.45 GHz) at 90 Degree-Sign C in a short time (within 15 min). Scanning electron microscopy confirms that these films possess smooth surface morphology with fully coalesced grains. In addition, photoluminescence (PL) measurements exhibit strong ultraviolet emission at room temperature, indicating potential applications for short-wave light-emitting photonic devices. The PL properties were improved by a thermal annealing process without generating structural defects. Hall measurements after thermal treatment show the carrier concentration to be of the order of 10{sup 19} cm{sup -3} which is comparable to those grown by conventional solution methods. The MAH method will offer a rapid route to synthesize epitaxial ZnO films with good optical and electrical properties for various applications. - Graphical abstract: FESEM images showing the morphology and cross sectional view of ZnO films grown using microwave assisted hydrothermal method at 90 Degree-Sign C for 30 min. Highlights: Black-Right-Pointing-Pointer Microwave Assisted Hydrothermal (MAH) method was introduced to synthesize epitaxial ZnO films. Black-Right-Pointing-Pointer The films possess smooth surface morphology, fully coalesced grains with high optical properties. Black-Right-Pointing-Pointer It exhibit good electrical properties (carrier concentration 10{sup 19} cm{sup -3}, mobility 19 cm{sup 2}/Vs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation between processing conditions, microstructure and charge transport in half-Heusler alloys

Five bulk samples of n-type Zr₀.₂₅Hf₀.₇₅NiSn₀.₉₇₅Sb₀.₀₂₅ half-Heusler (HH) alloy were fabricated by reacting elemental powders via (1) high temperature solid state (SS) reaction and (2) mechanical alloying (MA), followed by densification using spark plasma sintering (SPS) and/or hot pressing (HP). A portion of the sample obtained by SS reaction was mechanically alloyed before consolidation by hot pressing (SS–MA–HP). X-ray powder diffraction and transmission electron microscopy studies revealed that all SS specimen (SS–SPS, SS–HP, SS–MA–HP) are single phase HH alloys, whereas the MA sample (MA–SPS) contains metallic nanoprecipitates. Electronic and thermal transport measurements showed that the embedded nanoprecipitates induce a drastic increase in the carrier concentration (n), a large decrease in the Seebeck coefficient (S) and a marginal decrease in the lattice thermal conductivity (κ l ) of the MA–SPS sample leading to lower ZT values when compared to the SS–HP samples. Constant values of S are observed for the SS series regardless of the processing method. However, a strong dependence of the carrier mobility (μ), electrical conductivity (σ) and κ l on the processing and consolidation method is observed. For instance, mechanical alloying introduces additional structural defects which enhance electron and phonon scattering leading to moderately low values of μ and large reduction in κ l . This results in a net 20% enhancement in the figure of merit (ZT=0.6 at 775 K). HH specimen of the same nominal composition with higher ZT is anticipated from a combination of SS reaction, MA and SPS (SS–MA–SPS). - Graphical abstract: In half-Heusler alloys, thermopower values are insensitive to processing method, whereas carrier mobility (μ), electrical conductivity (σ), and κ l strongly dependent on the microstructure which in turn is altered by the synthesis, processing and consolidation method. Highlights: • Phase composition of HH alloy strongly depends on the synthesis technique. • Mechanical alloying of elements yields bulk HH alloy with metallic impurity phases. • Thermopower, carrier density, and effective mass of HHs are insensitive to processing conditions. • Mechanical alloying decreases the carrier mobility and lattice thermal conductivity of bulk HH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile and low cost oxidative conversion of MoS{sub 2} in α-MoO{sub 3}: Synthesis, characterization and application

This study describes a facile low cost route to synthesize the α-MoO{sub 3} through a conversion of the precursor MoS{sub 2} in oxidant media. The structure and morphology of the α-MoO{sub 3} were studied by high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The results show that α-MoO{sub 3} was obtained with reduced size, high purity, strongly-preferred orientation and structural defects, which ensures versatility and multifunctionality to this sample. For the purpose of applications, α-MoO{sub 3} was successfully employed in inverted organic solar cells devices as a possible alternative to the PEDOT:PSS in the hole transportation layer. - Graphical abstract: Synthesis process based on low cost oxidative conversion of MoS{sub 2} in α-MoO{sub 3} Display Omitted - Highlights: • A facile route to obtain α-MoO{sub 3} by refluxing the MoS{sub 2} precursor in oxidant media. • High purity and strongly-preferred orientation. • Belt-shaped material. • Enhanced conversion efficiency (PCE) when compared with conventional PEDOT:PSS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coercivity and superparamagnetic evolution of high energy ball milled (HEBM) bulk CoFe{sub 2}O{sub 4} material

Ball milling (BM) of bulk CoFe{sub 2}O{sub 4} powder material carried out in order to study its structural stability and attendant property changes with respect to coercivity enhancements and superparamagnetic behaviors, showed that drastic crystallite size reduction occurred within the first 1 h of ball milling. Crystallite size dropped from 74 nm for the as-received material to a value of 11.6 nm for 600 min of ball milling. Combined X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses confirmed crystallite size reduction with corresponding increase in interparticle agglomeration/pores with increasing milling time. The maximum coercivity of 0.46 T and the crystallite size of 15.6 nm were recorded with 20 min, while peak residual strain of 0.0066 mm/mm was for 180 min of BM. Material with peak coercivity value did not have peak residual strain, or minimum crystallite size, thereby suggesting that other structural defects contributed to coercivity enhancement. The saturation magnetization (M{sub s}) value decreased continuously with increasing milling time, while remanence magnetization (M{sub r}) and coercivity decreased with increasing BM time, after an initial increase. Moessbauer spectroscopy (MS) measurements confirmed both particle size distribution and decomposition/disordering of the material together with superparamagnetism as BM time increased. The degree of inversion ranged from 41% to 71.7% at different milled states from Moessbauer spectroscopy. The internal magnetic fields of the Fe sites associated with the tetrahedral and octahedral sites were 507.4 kOe and 492 kOe respectively in the unmilled state, while 484 kOe and 468.5 kOe in the 600 min milled state correspondingly.

36 MATERIALS SCIENCE↗

Magnetic and structural properties of nanostructured Fe–20Al–2Cr powder mixtures

Nanostructured Fe–20Al–2Cr (wt.%) powders have been prepared using high energy planetary ball-mill. Changes in structural, morphological and magnetic properties of the powders during mechanical alloying (MA) and during subsequent annealing have been examined by X-ray diffraction, scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). The observed structural and microstructural changes have been related to several processes occurring during MA. After MA, the material becomes significantly disordered and refines to nanoscale grain sizes (~ 14 nm). The obtained bcc α-Fe(Al,Cr) solid solution shows a ferromagnetic behavior. Upon subsequent annealing at 400 °C, α-Fe{sub 2}O{sub 3} and spinel oxides are formed at the surface of particles, while structural defects disappeared as Fe(Al,Cr) solid solution becomes more ordered and grain growth occurs. The saturation magnetization (Ms) shows lower values after annealing, attributed to the formation of metal oxides with low magnetic moment. - Graphical abstract: Display Omitted - Highlights: • Nanostructured Fe–Al–Cr powders were prepared by MA. • Careful analysis of the XRD patterns by using the Rietveld refinement • The lattice distortion is evidenced by the increase of both the lattice parameter and the static Debye Waller parameter. • Annealing at 400 °C stabilizes the microstructure at the nanometer range and leads to the formation of Fe{sub 3}O{sub 4} and Fe{sub 2}O{sub 3} oxides. • Both the milled and annealed samples are ferromagnetic.

36 MATERIALS SCIENCE↗

Development of pore-free Ti-Al-C MAX/Al-Si MMC composite materials manufactured by squeeze casting infiltration

Highlights: • Open-porous MAX phase preforms were synthesized by Microwave Assisted Self-propagating High-temperature Synthesis • Manufactured preforms were infiltrated by Al-Si alloy with the use of Squeeze Casting method to create pore-free composites • Obtained materials were characterized by the means of SEM, TEM and XRD analyses • Mechanical properties were tested and discussed in relation to the microstructures An innovative method of manufacturing of Ti-Al-C MAX/Al-Si MMC composite materials was developed using squeeze casting infiltration of open-porous MAX phase preforms. Self-propagating High-temperature Synthesis (SHS) in microwave-assisted mode was applied for the creation of preforms in the Ti-Al-C system, that were subsequently infiltrated with Al-Si alloy to create dense composite materials. Microstructure and phase composition, structural defects and potential impacts between constituents of manufactured composites were characterized by the means of SEM and TEM microscopies and XRD analysis. No undesired reaction at the interface was observed, but TiC inclusions were identified in the material. Among the mechanical properties, the instrumental Young's modulus and Vickers hardness were established. The hardness and the elastic modulus of the matrix were enhanced 4 to 5 times. Wear behaviour was tested with a “pin-on-flat” method with the reciprocating motion for different load values (0.1, 0.2 and 0.5 MPa) for tool steel counterpart. Wear resistance of the composite material (WR = 1.6–2.3 × 10{sup −4} mm{sup 3}/Nm) was twofold higher than for the sole matrix (WR = 3.5–4.8 × 10{sup −4} mm{sup 3}/Nm). The developed manufacturing method allows the effective fabrication of pore-free MAX phase based MMC composite materials, with significantly higher wear resistance than the widely applied Al-Si alloys.

36 MATERIALS SCIENCE↗

Influence of sintering conditions on the microstructure and optical properties of Eu: CaF{sub 2} transparent ceramic

Highlights: • Eu: CaF2 ceramics sintering at different conditions were fabricated by HP method. • The results show that the temperatures have great effect on the microstructure. • The ceramic sintered at 600 °C/30 MPa has high transmittance and pore-free structure. • The diffusion and densification process mainly occurs between 350 °C and 500 °C. • The optical losses in ceramic were caused by structure defects and polishing damage. - Abstract: Nanopowders of the 5 at.% Eu doped CaF{sub 2} have been synthesized by co-precipitated method. X-ray diffraction (XRD) indicated that the samples corresponds to the cubic CaF{sub 2} phase and scanning electron microscopy (SEM) showed that the morphology of nanopowders were approximately spherical. The Eu: CaF{sub 2} transparent ceramics were fabricated by hot-pressing (HP) method at different P-T conditions in a vacuum environment. The fracture surface, the relative density, average grain size and shrinkage displacements were also studied to analysis the influence of sintering conditions on Eu: CaF{sub 2} ceramic. In comparison with other samples, the proper sintering temperature and pressure was 600 °C/30 MPa. The transmittance of ceramic was up to 79.7% and 88.85% at the wavelength of 760 nm and 2400 nm. Furthermore, the emission spectra of Eu: CaF{sub 2} transparent ceramics under 393.5 nm excitation was also discussed.

36 MATERIALS SCIENCE↗