Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Nanoporous Wood Chips Based Sizable, Robust, and Low-Cost Honeycomb Vacuum Insulation Panels (DOE BENEFIT Final Research Performance Progress Report (RPPR))

Conventional vacuum insulation panels (VIPs) suffer from severe limitations including high cost, vulnerability to perforation, and significant performance degradation over time due to vacuum loss. InventWood Inc. (IW) and partnering teams completely re-engineered the VIP structure by constructing arrays of isolated vacuum-cells to enable limited cutting at designated areas (in between vacuum cells) and reduced consequential vacuum loss due to puncture. The teams also replaced the expensive vacuum insulation core materials with a low-cost commercial wood pulp and recycled long fiber. The wood pulp derived VIP can deliver an overall panel insulation of R15 (<0.01W/m·K) with over 90% thermal resistance retention after cutting (R13.5 overall, R5 along the cut edges). In addition, the vacuum-cell-array design minimizes edge losses, resulting in more durable performance, longer service life (>50 years), and higher R-value per dollar towards a cost target of <$1/ft 2 ·in. It is anticipated that the Nanochip-VIP will attract strong market interest and become an affordable insulation solution for energy efficient buildings and retrofits, leading to significant reductions in energy usage.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Analysis of the Fatigue Strength of Welds in Terms of Local Stress

A local approach is developed for calculating the fatigue strength of welded metal structures, selecting the basic weld structure, and identifying the group of welded structures corresponding to that basic structure. To that end, the stress state of typical welded structures is analyzed on the basis of two-level stress concentrators. The results may be used to develop standards for calculating the fatigue strength of welded metal structures.

42 ENGINEERING↗

Robots in the Production of Polymer-Composite Components

Two robot systems for the shaping and machining of polymer-composite products are described. In the shaping system, an industrial robot lays out the fibers as prepreg tape. In the machining system, the boring and milling of polymer composites is improved. This system is adapted for the machining of sound-absorbing structures in airplane engines,.

42 ENGINEERING↗

Crystal Plasticity Simulation of Magnesium and Its Alloys: A Review of Recent Advances

Slip and extension twinning are the dominant deformation mechanisms in Magnesium (Mg) and its alloys. Crystal plasticity is a powerful tool to study these deformation mechanisms. Different schemes have incorporated crystal plasticity models to capture different properties, which vary from the simple homogenization Taylor model to the full-scale crystal plasticity finite element model. In the current study, a review of works available in the literature that addresses different properties of Mg and its alloys using crystal plasticity modes is presented. In addition to slip and twinning, detwinning is another deformation mechanism that is activated in Mg and its alloys. The different models that capture detwinning will also be addressed here. Finally, the recent experimental frameworks, such as in-situ neutron diffraction, 3D high energy synchrotron X-ray techniques, and digital image correlation under scanning electron microscopy (SEM-DIC), which are incorporated along crystal plasticity models to investigate the properties of Mg and its alloys, are addressed. Future research directions towards improving the deformation response of Mg and its alloys are identified, which can lead to increased deployment of the lightest structural metal in engineering applications.

36 MATERIALS SCIENCE↗

In-Situ Calibrated Modeling of Residual Stresses Induced in Machining under Various Cooling and Lubricating Environments

Although many functional characteristics, such as fatigue life and damage resistance depend on residual stresses, there are currently no industrially viable ‘Digital Process Twin’ models (DPTs) capable of efficiently and quickly predicting machining-induced stresses. By leveraging advances in ultra-high-speed in-situ experimental characterization of machining and finishing processes under plane strain (orthogonal/2D) conditions, we have developed a set of physics-based semi-analytical models to predict residual stress evolution in light of the extreme gradients of stress, strain and temperature, which are unique to these thermo-mechanical processes. Initial validation trials of this novel paradigm were carried out in Ti-6Al4V and AISI 4340 alloy steel. A variety dry, cryogenically cooled and oil lubricated conditions were evaluated to determine the model’s ability to capture the tribological changes induced due to lubrication and cooling. The preliminarily calibrated and validated model exhibited an average correlation of better than 20% between the predicted stresses and experimental data, with calculation times of less than a second. Based on such fast-acting DPTs, the authors envision future capabilities in pro-active surface engineering of advanced structural components (e.g., turbine blades).

36 MATERIALS SCIENCE↗

Covalently bonded three-dimensional carbon nanotube solids via boron induced nanojunctions

The establishment of covalent junctions between carbon nanotubes (CNTs) and the modification of their straight tubular morphology are two strategies needed to successfully synthesize nanotube-based three-dimensional (3D) frameworks exhibiting superior material properties. Engineering such 3D structures in scalable synthetic processes still remains a challenge. This work pioneers the bulk synthesis of 3D macroscale nanotube elastic solids directly via a boron-doping strategy during chemical vapor deposition, which influences the formation of atomic-scale elbow junctions and nanotube covalent interconnections. Detailed elemental analysis revealed that the elbow junctions are preferred sites for excess boron atoms, indicating the role of boron and curvature in the junction formation mechanism, in agreement with our first principle theoretical calculations. Exploiting this material s ultra-light weight, super-hydrophobicity, high porosity, thermal stability, and mechanical flexibility, the strongly oleophilic sponge-like solids are demonstrated as unique reusable sorbent scaffolds able to efficiently remove oil from contaminated seawater even after repeated use.

36 MATERIALS SCIENCE↗

Assessment of First- and Second-Order Wave-Excitation Load Models for Cylindrical Substructures

The hydrodynamic loads on an offshore wind turbine's support structure present unique engineering challenges for offshore wind. Two typical approaches used for modeling these hydrodynamic loads are potential flow (PF) and strip theory (ST), the latter via Morison's equation. This study examines the first- and second-order wave-excitation surge forces on a fixed cylinder in regular waves computed by the PF and ST approaches to (1) verify their numerical implementations in HydroDyn and (2) understand when the ST approach breaks down. The numerical implementation of PF and ST in HydroDyn, a hydrodynamic time-domain solver implemented as a module in the FAST wind turbine engineering tool, was verified by showing the consistency in the first- and second-order force output between the two methods across a range of wave frequencies. ST is known to be invalid at high frequencies, and this study investigates where the ST solution diverges from the PF solution. Regular waves across a range of frequencies were run in HydroDyn for a monopile substructure. As expected, the solutions for the first-order (linear) wave-excitation loads resulting from these regular waves are similar for PF and ST when the diameter of the cylinder is small compared to the length of the waves (generally when the diameter-to-wavelength ratio is less than 0.2). The same finding applies to the solutions for second-order wave-excitation loads, but for much smaller diameter-to-wavelength ratios (based on wavelengths of first-order waves).

17 WIND ENERGY↗

Assessment of First- and Second-Order Wave-Excitation Load Models for Cylindrical Substructures: Preprint

The hydrodynamic loads on an offshore wind turbine's support structure present unique engineering challenges for offshore wind. Two typical approaches used for modeling these hydrodynamic loads are potential flow (PF) and strip theory (ST), the latter via Morison's equation. This study examines the first- and second-order wave-excitation surge forces on a fixed cylinder in regular waves computed by the PF and ST approaches to (1) verify their numerical implementations in HydroDyn and (2) understand when the ST approach breaks down. The numerical implementation of PF and ST in HydroDyn, a hydrodynamic time-domain solver implemented as a module in the FAST wind turbine engineering tool, was verified by showing the consistency in the first- and second-order force output between the two methods across a range of wave frequencies. ST is known to be invalid at high frequencies, and this study investigates where the ST solution diverges from the PF solution. Regular waves across a range of frequencies were run in HydroDyn for a monopile substructure. As expected, the solutions for the first-order (linear) wave-excitation loads resulting from these regular waves are similar for PF and ST when the diameter of the cylinder is small compared to the length of the waves (generally when the diameter-to-wavelength ratio is less than 0.2). The same finding applies to the solutions for second-order wave-excitation loads, but for much smaller diameter-to-wavelength ratios (based on wavelengths of first-order waves).

17 WIND ENERGY↗

Super-surface selective nanomembranes providing simultaneous high permeation flux and high selectivity

Superhydrophobic membrane structures having a beneficial combination of throughput and a selectivity. The membrane structure can include a porous support substrate; and a membrane layer adherently disposed on and in contact with the porous support substrate. The membrane layer can include a nanoporous material having a superhydrophobic surface. The superhydrophobic surface can include a textured surface, and a modifying material disposed on the textured surface. Methods of making and using the membrane structures.

42 ENGINEERING↗

Extraction of mechanical properties of materials through deep learning from instrumented indentation

Instrumented indentation has been developed and widely utilized as one of the most versatile and practical means of extracting mechanical properties of materials. This method is particularly desirable for those applications where it is difficult to experimentally determine the mechanical properties using stress–strain data obtained from coupon specimens. Such applications include material processing and manufacturing of small and large engineering components and structures involving the following: three dimensional (3D) printing, thin-film and multilayered structures, and integrated manufacturing of materials for coupled mechanical and functional properties. Here, we utilize the latest developments in neural networks, including a multifidelity approach whereby deep-learning algorithms are trained to extract elastoplastic properties of metals an d alloys from instrumented indentation results using multiple datasets for desired levels of improved accuracy. We have established algorithms for solving inverse problems by recourse to single, dual, and multiple indentation and demonstrate that these algorithms significantly outperform traditional brute force computations and function-fitting methods. Moreover, we present several multifidelity approaches specifically for solving the inverse indentation problem which 1) significantly reduce the number of high-fidelity datasets required to achieve a given level of accuracy, 2) utilize known physical and scaling laws to improve training efficiency and accuracy, and 3) integrate simulation and experimental data for training disparate datasets to learn and minimize systematic errors. The predictive capabilities and advantages of these multifidelity methods have been assessed by direct comparisons with experimental results for indentation for different commercial alloys, including two wrought aluminum alloys and several 3D printed titanium alloys.

3D printed materials, stress-strain behavior, mult↗

Hierarchical porous metals with deterministic 3D morphology and shape via de-alloying of 3D printed alloys

The present disclosure relates to a method for forming a three dimensional, hierarchical, porous metal structure with deterministically controlled 3D multiscale pore architectures. The method may involve providing a feedstock able to be applied in an additive manufacturing process, and using an additive manufacturing process to produce a three dimensional (3D) structure using the feedstock. The method may involve further processing the 3D structure through at least a de-alloying operation to form a metallic 3D structure having an engineered, digitally controlled macropore morphology with integrated nanoporosity.

Qi, Zhen↗

Method to control residual stress in a film structure and a system thereof

A method for controlling residual stress in a structure in a MEMS device and a structure thereof includes selecting a total thickness and an overall equivalent stress for the structure. A thickness for each of at least one set of alternating first and second layers is determined to control an internal stress with respect to a neutral axis for each of the at least alternating first and second layers and to form the structure based on the selected total thickness and the selected overall equivalent stress. Each of the at least alternating first and second layers is deposited to the determined thickness for each of the at least alternating first and second layers to form the structure.

42 ENGINEERING↗

Engineering the hole confinement for CdTe-based quantum dot molecules

We demonstrate an efficient method to engineer the quantum confinement in a system of two quantum dots grown in a vertical stack. We achieve this by using materials with a different lattice constant for the growth of the outer and inner barriers. We monitor the resulting dot morphology with transmission electron microscopy studies and correlate the results with ensemble quantum dot photoluminescence. Furthermore, we embed the double quantum dots into diode structures and study photoluminescence as a function of bias voltage. We show that in properly engineered structures, it is possible to achieve a resonance of the hole states by tuning the energy levels with electric field. At the resonance, we observe signatures of a formation of a molecular state, hybridized over the two dots.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preliminary Investigation for Corrective Action Unit 572: Test Cell C Ancillary Building and Structures, Corrective Action Site 25-33-05: Building 3901, Engine Transport System Maintenance Building, Nevada National Security Site, Nevada, Revision 0

Navarro-Intera, LLC (N-I), personnel—assisted by National Security Technologies, LLC (NSTec), radiological control personnel—conducted a preliminary field investigation to obtain information about Corrective Action Unit (CAU) 572, Test Cell C Ancillary Building and Structures; Corrective Action Site (CAS) 25-33-05, Building 3901, Engine Transport System Maintenance (ETSM) building. The ETSM building is located in Area 25 of the Nevada National Security Site (NNSS). The information learned from the investigation will reduce uncertainty about the nature and scope of potential releases and, therefore, reduce management risk associated with the planning and scheduling of future corrective action investigation activities. Site reconnaissance efforts for CAS 25-33-05 were conducted on June 18 and September 10–11, 2012. Detailed site conditions, building contents, potential waste streams, photographic documentation as well as radiological and chemical survey results are contained within this preliminary investigation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nanoscale Structure and Interfacial Electrochemical Reactivity of Moiré-Engineered Atomic Layers

Here, the electronic properties of atomically thin van der Waals (vdW) materials can be precisely manipulated by vertically stacking them with a controlled offset (for example, a rotational offset─i.e., twist─between the layers, or a small difference in lattice constant) to generate moiré superlattices. In recent years, the application of this “twistronics” concept to interfacial electrochemistry has unveiled unique pathways for tailoring the electrochemical reactivity. Furthermore, this Account provides an overview of our work that leveraged a suite of structural characterization methods, such as interferometric four-dimensional scanning transmission electron microscopy, dark-field transmission electron microscopy, and scanning tunneling microscopy, along with nanoscale electrochemical measurement techniques, namely, scanning electrochemical cell microscopy (SECCM), to uncover and dissect the profound impact of electrode electronic structure, controlled by interlayer twist, on interfacial electron transfer kinetics.

Charge transfer↗

Engineering Property Prediction Tools for Tailored Polymer Composite Structures (49465)

Process and constitutive models as well as characterization tools and testing methods were developed to determine stress-strain responses, damage development, strengths and creep of long-fiber thermoplastics (LFTs). The developed models were implemented in Moldflow and ABAQUS and have been validated against LFT data obtained experimentally.

36 MATERIALS SCIENCE↗

The influence of pilot injection on high-temperature ignition processes and early flame structure in a high-speed direct injection diesel engine

Simultaneous high-speed natural luminosity and OH* chemiluminescence imaging is used to characterize high-temperature ignition processes in conventional diesel combustion with a pilot-main injection strategy in a single-cylinder, light-duty optical diesel engine. High-speed imaging provides temporally and spatially resolved information in terms of high-temperature ignition processes and flame structure during the combustion. Using these imaging measurements, the high-temperature inflammation and the diffusion flame development processes are analyzed. The chemiluminescence signal shows a hot, reactive mixture, which gradually decreases after the peak release of the pilot combustion and lasts long after the apparent heat release has ended. Therefore, when the reactive pilot mixture exists near the main injection jets, the high-temperature ignition of the main injection is apparently initiated through interactions with the reactive pilot mixture. High-temperature autoignition, another process by which ignition of the main injection occurs, is observed in main injection plumes where the chemiluminescence signal of the reactive pilot mixture becomes very weak or is absent at the start of main injection. As the reaction of the main injection continues, the non-premixed main injection jet structure is developed and the high-temperature reacting region expands throughout the jet.

Park, Cheolwoong↗