Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Exploring mechanisms of a tropospheric archetype: CH{sub 3}O{sub 2} + NO

Methylperoxy radical (CH{sub 3}O{sub 2}) and nitric oxide (NO) contribute to the propagation of photochemical smog in the troposphere via the production of methoxy radical (CH{sub 3}O) and nitrogen dioxide (NO{sub 2}). This reaction system also furnishes trace quantities of methyl nitrate (CH{sub 3}ONO{sub 2}), a sink for reactive NO{sub x} species. Here, the CH{sub 3}O{sub 2} + NO reaction is examined with highly reliable coupled-cluster methods. Specifically, equilibrium geometries for the reactants, products, intermediates, and transition states of the ground-state potential energy surface are characterized. Relative reaction enthalpies at 0 K (ΔH{sub 0K}) are reported; these values are comprised of electronic energies extrapolated to the complete basis set limit of CCSDT(Q) and zero-point vibrational energies computed at CCSD(T)/cc-pVTZ. A two-part mechanism involving CH{sub 3}O and NO{sub 2} production followed by radical recombination to CH{sub 3}ONO{sub 2} is determined to be the primary channel for formation of CH{sub 3}ONO{sub 2} under tropospheric conditions. Constrained optimizations of the reaction paths at CCSD(T)/cc-pVTZ suggest that the homolytic bond dissociations involved in this reaction path are barrierless.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wafer-scale controlled exfoliation of metal organic vapor phase epitaxy grown InGaN/GaN multi quantum well structures using low-tack two-dimensional layered h-BN

Recent advances in epitaxial growth have led to the growth of III-nitride devices on 2D layered h-BN. This advance has the potential for wafer-scale transfer to arbitrary substrates, which could improve the thermal management and would allow III-N devices to be used more flexibly in a broader range of applications. We report wafer scale exfoliation of a metal organic vapor phase epitaxy grown InGaN/GaN Multi Quantum Well (MQW) structure from a 5 nm thick h-BN layer that was grown on a 2-inch sapphire substrate. The weak van der Waals bonds between h-BN atomic layers break easily, allowing the MQW structure to be mechanically lifted off from the sapphire substrate using a commercial adhesive tape. This results in the surface roughness of only 1.14 nm on the separated surface. Structural characterizations performed before and after the lift-off confirm the conservation of structural properties after lift-off. Cathodoluminescence at 454 nm was present before lift-off and 458 nm was present after. Electroluminescence near 450 nm from the lifted-off structure has also been observed. These results show that the high crystalline quality ultrathin h-BN serves as an effective sacrificial layer—it maintains performance, while also reducing the GaN buffer thickness and temperature ramps as compared to a conventional two-step growth method. These results support the use of h-BN as a low-tack sacrificial underlying layer for GaN-based device structures and demonstrate the feasibility of large area lift-off and transfer to any template, which is important for industrial scale production.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-modal characterization methods of solid-electrolyte interphase in silicon-graphite composite electrodes

Composite silicon-graphite (Si-Gr) anodes can improve battery energy density, due to Si's high gravimetric capacity, while mitigating mechanical degradation of the anode and solid-electrolyte interphase (SEI) caused by Si volumetric expansion. Optimizing these anodes is challenging, in part due to difficulty characterizing the SEI structure and composition. In this work, we present multi-modal characterization of the SEI on composite Si-Gr anodes to relate SEI chemical composition and structure to functional properties. Discrepancies in elemental concentrations from X-ray photoelectron spectroscopy, Auger electron spectroscopy, and energy-dispersive X-ray spectroscopy (EDS) are attributed to varying information depth and lateral resolution of the individual probes. However, by combining quantitative composition information with spatially resolved element mapping from scanning transmission electron microscopy, EDS, and electron energy loss spectroscopy, a holistic picture of the SEI emerges. We observe the bilayer SEI structure and a direct correlation between elemental Li and F, suggesting that most Li in the SEI exists as lithium fluoride (LiF). Further, LiF concentration is directly proportional to the maximum SEI resistivity, as determined by scanning spreading resistance microscopy. Lastly, there is an inverse relationship between lithium carbonate and LiF concentration in the SEI, providing insight into the detailed chemistry of SEI formation and evolution.

25 ENERGY STORAGE↗

Successful Cleaning and Study of Contamination of Si(001) in Ultrahigh Vacuum

This paper presents the very first surface physics experiment performed in ultrahigh vacuum (UHV) in Romania, using a new molecular beam epitaxy (MBE) installation. Cleaning of a Si(001) wafer was achieved by using a very simple technique: sequences of annealing at 900-1000 deg. C in ultrahigh vacuum: low 10{sup -8} mbar, with a base pressure of 1.5x10{sup -10} mbar. The preparation procedure is quite reproducible and allows repeated cleaning of the Si(001) after contamination in ultrahigh vacuum. The Si(001) single crystal surface is characterized by low energy electron diffraction (LEED), reflection high energy electron diffraction (RHEED), and Auger electron spectroscopy (AES). The latter technique is utilized in order to investigate the sample contamination by the residual gas in the UHV chamber, as determined by a residual gas analyzer (RGA). Unambiguous assignment of oxidized and unoxidized silicon is provided; also, an important feature is that the LVV Auger peak at 90-92 eV cannot be solely attributed to clean Si (i.e. Si surrounded only by Si), but also to silicon atoms bounded with carbon. Even with a sum of partial pressures of oxygen and carbon containing molecules in the range of 5x10{sup -10} mbar, the sample is contaminated very quickly, having a (1/e) lifetime of about 76 minutes.

36 MATERIALS SCIENCE↗

Adsorption and electropolymerization of toluidine blue on the nanostructured octakis(hydridodimethylsiloxy)octasilsesquioxane surface

Toluidine blue O (TBO) was adsorbed on the octakis(hydridodimethylsiloxy)octasilsesquioxane (Q{sub 8}M{sub 8}{sup H}) surface. The characterization of the precursor (Q{sub 8}M{sub 8}{sup H}) and resulting materials obtained by the reaction of Q{sub 8}M{sub 8}{sup H} and toluidine blue (CTBO) were defined using Fourier transform infrared spectra, nuclear magnetic resonance solid-state {sup 13}C and Si{sup 29} magic angle spinning. The electrochemical polymerization in a glassy carbon electrode was verified by means of a film silsesquioxane formation (FCTBO) using cyclic voltammetry in a potential range of -0.5 to 1.3 V (vs. saturated calomel electrode (SCE)) in a Britton Robinson (B-R) buffer solution (pH 2.0). The cyclic voltammogram of the film exhibits two redox couples with a formal potential of -0.15 and -0.02 V (B-R buffer pH 5). The formal potential shifts linearly in the cathodic direction by increasing the pH solution with a slope of 71 and 57 mV per unit for the first and second couple, respectively. The film was electrochemically very stable.

36 MATERIALS SCIENCE↗

A comparative study of SrO and BaO doping to CeO{sub 2}-ZrO{sub 2}: Characteristic and its catalytic performance for three-way catalysts

Graphical abstract: Display Omitted Highlights: ► The prepared materials have a face-centered cubic structure and nanosize particles. ►Comparing to CZB, aged CZS has 494 μmol/g of OSC and 30 m{sup 2}/g of surface area. ► CZS and CZB have similar NO sorption and reductive properties and different H{sub 2} uptake. ► T{sub 50} of Pt-Rh/CZS/LA is as low as 199 °C for CO, 228 °C for NO, and 252 °C for C{sub 3}H{sub 8}. ► Pt-Rh/CZS/LA has wider working-window at 320 °C under different λ value. -- Abstract: Ceria-zirconia-strontia (Ce{sub 0.35}Zr{sub 0.55}Sr{sub 0.10}O{sub 1.9}) and ceria-zirconia-baria (Ce{sub 0.35}Zr{sub 0.55}Ba{sub 0.10}O{sub 1.9}) were synthesized using an oxidation-co-precipitation method with hydrogen peroxide (H{sub 2}O{sub 2}) as oxidant. The physical and chemical properties of the prepared materials were investigated using Brunauer–Emmett–Teller surface area characterization, transmission electron microscopy, X-ray diffraction, Raman spectra, X-ray photoelectron spectroscopy, and oxygen pulse reaction. The prepared materials were used in preparing three-way catalysts with low Pt and Rh content. Moreover, catalytic activities were evaluated at a fixed bed under a simulated gaseous mixture. The results are as follows: (1) the prepared materials have a face-centered cubic structure and are nano-sized; (2) aged Ce{sub 0.35}Zr{sub 0.55}Sr{sub 0.10}O{sub 1.9} has higher oxygen storage capacity (494 μmol/g), better thermal stability (30 m{sup 2}/g), good low-temperature reducibility, and high hydrogen uptake after TPR-redox cycles; (3) the light-off temperature (T{sub 50}) of Pt-Rh/CZS/LA can be as low as 199 °C for CO, 228 °C for NO, and 252 °C for C{sub 3}H{sub 8}; and (4) Pt-Rh/CZS/LA has a fairly wide working-window.

36 MATERIALS SCIENCE↗

Orbital alignment at the internal interface of arylthiol functionalized CdSe molecular hybrids

Organic-inorganic nanoparticle molecular hybrid materials are interesting candidates for improving exciton separation in organic solar cells. The orbital alignment at the internal interface of cadmium selenide (ArS-CdSe) hybrid materials functionalized with covalently attached arylthiolate moieties was investigated through X-ray photoemission spectroscopy (XPS) and ultraviolet photoemission spectroscopy (UPS). A physisorbed interface between arylthiol (ArSH) ligands and CdSe nanoparticles was also investigated for comparison. This interface was created via a multi-step thin film deposition procedure in-vacuo, where the surface was characterized after each experimental step. This enabled the direct comparison of ArSH/CdSe interfaces produced via physisorption and ArS-CdSe covalently attached hybrid materials, which rely on a chemical reaction for their synthesis. All material depositions were performed using an electrospray deposition, which enabled the direct injection of solution-originating molecular species into the vacuum system. This method allows XPS and UPS measurements to be performed immediately after deposition without exposure to the atmosphere. Transmission electron microscopy was used to determine the morphology and particle size of the deposited materials. Ultraviolet-visible spectroscopy was used to estimate the optical band gap of the CdSe nanoparticles and the HOMO-LUMO gap of the ArSH ligands. These experiments showed that hybridization via covalent bonds results in an orbital realignment at the ArSH/CdSe interface in comparison to the physisorbed interface. The orbital alignment within the hybrid caused a favorable electron injection barrier, which likely facilitates exciton-dissociation while preventing charge-recombination.

36 MATERIALS SCIENCE↗

NOAA Air Resources Laboratory Atmospheric Turbulence and Diffusion Division Contribution to LAFE Field Campaign Report

The Land-Atmosphere Feedback Experiment (LAFE) was conducted between 1 and 31 August, 2017 at the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) observatory. The main scientific goal of LAFE was to investigate feedbacks occurring between different land surface types and the overlying atmosphere to improve turbulence parameterizations in numerical weather prediction models. LAFE collaborators included scientists from the following institutions: Cleveland State University Cooperative Institute for Meteorological Satellite Studies (CIMSS) Cooperative Institute for Research in Environmental Sciences (CIRES) Leibniz University Institute of Meteorology and Climatology Marquette University NASA Goddard Space Flight Center National Center for Atmospheric Research (NCAR) National Severe Storms Laboratory (NSSL) NOAA Earth System Research Laboratory (ESRL) Pacific Northwest National Laboratories (PNNL) University of Hohenheim Institute of Physics and Meteorology University of Tennessee Space Institute (UTSI). In addition to helping plan the scientific objectives of LAFE, collaborators deployed several lidars (i.e., temperature, water, vapor, and wind) and remote-sensing instruments (e.g., microwave radiometers, atmospheric emitted radiance interferometers [AERIs], etc.) to complement the suite of instrument platforms already present at the SGP site. The measurement platforms, as well as scientific objectives of LAFE, are summarized in Wulfmeyer et al. (2018). To complement these platforms, the NOAA Atmospheric Turbulence and Diffusion Division (ATDD) installed micrometeorological towers to continuously measure fluxes of momentum, sensible heat, latent heat, and CO 2 at 2 m and 10 m above ground level (AGL) at three sites during LAFE. Tower measurements also included temperature, humidity, wind speed and direction, pressure, rainfall, soil temperature, and soil moisture. The three micrometeorological towers were installed between 9 and 13 July, 2017 and were removed between 12 and 14 September, 2017. During the experiment, the footprint of Tower 1 included a mixture of soybean and grassland that transitioned to mature soybean crop during the second half of the experiment. Tower 2’s footprint encompassed a field of grazed pasture, and Tower 3’s footprint was a mature soybean crop. The meteorological and flux measurements from these towers were/are being used to: Increase the spatial density of measurement platforms that were already available at the ARM facility and that were deployed during LAFE Improve the characterization of surface fluxes around the SGP site Explore the validity of applying Monin-Obukhov Similarity Theory (MOST) over different land surface types and improve knowledge of flux-gradient relationships Provide initial conditions and be used for verification for large-eddy simulations (LES) Evaluate numerical weather prediction models, e.g., the High-Resolution Rapid Refresh (HRRR), to identify and correct for biases within these models Evaluate the role of low-level advection at each site, which would be present in the flux-divergence data sets obtained from the three towers.

Southern Great Plains, unmanned aerial systems, su↗

Atomic force microscopy and scanning electron microscopy characterization of the controlling of surface morphology of epoxy‐amine‐cured spin‐coated films

Abstract Atomic force microscopy (AFM) was successfully used to study spin‐coated, amine‐cured epoxy film microstructure and morphology. The air‐epoxy and epoxy‐substrate interfaces were examined using tapping‐mode height and phase imaging AFM. The impact of relative humidity on the morphology and microstructure of the surfaces was determined. AFM was able to elucidate the changes on the surface as relative humidity during processing increased. It was observed that large nodular formations formed on the epoxy surface expose to the air but not epoxy surface formed on the substrate in addition to varying regions of more or less compliant structures, which was attributed to carbamate formation caused by the amine curing agent reaction with atmospheric CO 2 . Scanning electron microscopy (SEM) was used to further elucidate interface and interphase morphology of spin‐coated epoxies. Experimentation also demonstrated that post‐curing above the glass transition did not change the morphology structure, suggesting surface structures are “locked‐in.” SEM was used to further elucidate how the interface and interphase change with changing environmental conditions at both the air‐epoxy and epoxy‐substrate interface/interphases, including the impact of atmospheric CO 2 on Marangoni cell formation.

Shenk, Timothy M.↗

Dispersal limitation and the assembly of soil Actinobacteria communities in a long-term chronosequence

It is uncertain whether the same ecological forces that structure plant and animal communities also shape microbial communities, especially those residing in soil. We sought to uncover the relative importance of present-day environmental characteristics, climatic variation, and historical contingencies in shaping soil actinobacterial communities in a long-term chronosequence. Actinobacteria communities were characterized in surface soil samples from four replicate forest stands with nearly identical edaphic and ecological properties, which range from 9500 to 14,000 years following glacial retreat in Michigan. Terminal restriction fragment length polymorphism (TRFLP) profiles and clone libraries of the actinobacterial 16S rRNA gene were constructed in each site for phenetic and phylogenetic analysis to determine whether dispersal limitation occurred following glacial retreat, or if community composition was determined by environmental heterogeneity. At every level of examination, actinobacterial community composition most closely correlated with distance, a surrogate for time, than with biogeochemical, plant community, or climatic characteristics. Despite correlation with leaf litter C:N and annual temperature, the significant and consistent relationship of biological communities with time since glacial retreat provides evidence that dispersal limitation is an ecological force structuring actinobacterial communities in soil over long periods of time.

54 ENVIRONMENTAL SCIENCES↗

Development and Application of DropletProbe Mass Spectrometry for Examining Biodistribution of Therapeutics

dropletProbe mass spectrometry is a novel technique for molecular characterization of surfaces. It can be used for rapid ex vivo analysis of therapeutics from thin animal tissue sections and has been shown to improve understanding of a drug’s absorption, distribution, metabolism and excretion (ADME) properties. Here, we describe the tissue distribution analysis of diclofenac from a dosed whole-body mouse thin tissue section using a dropletProbe mass spectrometry system.

Chen, Bingming↗

Characterizing the Distribution of Microwave Surface Resistance of HTS Film Based on Metal Ring

This paper presents a novel method for measuring the microwave surface resistance distribution of high-temperature superconducting thin films by a dielectric resonator with a metal ring. After calibration, the effect of metal ring loss on measurement accuracy is negligible. The measurement resolution is determined by the internal diameter of the metal ring, which makes the design of the device more flexible. Therefore, measurement with high resolution and convenience can be achieved simultaneously by using a metal ring with proper size and operating at a relatively low frequency. A test device working at 32 GHz with TE{sub 01(1 + δ)} mode was developed. Its resolution is a circular area with a diameter of 5 mm and an area of 19.6 mm{sup 2}. The unloaded quality factor of the test device is more than 140,000, when it is loaded by the calibration cavity. The test device has a relative uncertainty of less than 6%, which complies with the uncertainty (20%) specified by the international standard for the microwave surface resistance measurement of high-temperature superconducting (HTS) thin film. The surface resistance distribution of a 2-in. YBCO/LAO/YBCO superconducting film sample was measured by this test device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of Superhydrophobic Calcium Phosphate Coating on Mg-Zn-Ca alloy and Its Corrosion Resistance

A novel superhydrophobic calcium phosphate coating was prepared on a magnesium alloy substrate by a highly effective chemical conversion process and subsequent chemical modification. Different methods were employed to characterize the surface morphology and chemical composition as well as measure the wettability of the coating. It was demonstrated that the as-prepared superhydrophobic calcium phosphate coating has a typical three-level hierarchical structure consisted of micro-protrusions, submicro-lumps and nano-grains, conferring excellent superhydrophobicity with a water contact angle of 159°. The electrochemical measurements and appropriate equivalent circuit revealed that the corrosion-resistant performance of the superhydrophobic calcium phosphate coating was significantly improved as compared with that of the substrate, the corrosion potential of the superhydrophobic coating increases from −1.56 to −1.36 V, and its corrosion current density decreases from 1.29 × 10{sup −4} to 1.3 × 10{sup −6} A/cm{sup 2}. The anti-corrosion mechanism of the superhydrophobic coating was also discussed. It can be indicated that the corrosion inhibitive properties of the coating are in accordance with its hydrophobicity, which is owing to the presence of a protective layer of air trapped in the grooves of the coating surface to isolate the underlying materials from the external environment.

36 MATERIALS SCIENCE↗

Corrosion Behavior of Fe-40at.%Al-Based Intermetallic in 0.25 M H{sub 2}SO{sub 4} Solution

The electrochemical behavior of Fe-40at.%Al-based intermetallic microalloyed with 3 and 5 at.% Cu additions in 0.25 M H{sub 2}SO{sub 4} solution over time was studied. A complementary study to characterize the surface morphology and semiquantitative chemical analysis of the corrosion products after 24 h of immersion was performed using scanning electron microscopy and x-ray energy dispersion spectrum. By means of electrochemical techniques, it was shown that Cu addition has a positive effect on corrosion resistance of Fe-40at.%Al-based intermetallic alloy. Additionally, the relatively high concentration of Cu consolidated the passive film of corrosion products and its stability.

36 MATERIALS SCIENCE↗

Paper or Plastic? Multiscale Material Handling Properties of Two Model Municipal Solid Waste Streams

Purpose: Municipal Solid Waste (MSW) is a potentially valuable sustainable feedstock for fuel and chemical production due to its carbon-rich content and low cost. This study aims to assess the material handling properties of paperand plastic-rich MSW feedstocks to mitigate equipment failure and processing downtime. Methods: The material handling properties of crumbled MSW feedstocks were measured using apowder rheometer with mass flow hopper calculations to assess handling performance. Inverse gas chromatography was use to measure the surface energy differences between feedstocks. Electron microscopy and Raman spectroscopy was used to evaluate microscale features that may contribute to material handling differences. Results: Plastic and paper rich feedstocks crumbled to a nominal 2 mm particle size were observed to have similar flow and handling characteristics with reasonable hopper outlets. 2 mm plastic rich crumbles, with their higher bulk density, exhibited superior flow performance. By contrast, 4 mm material required significantly larger hopper outlets, indicating poor flowability. Paper rich and 4 mm plastic rich samples displayed broad particle size distributions, which contributed to particle interlocking, jamming, and other flow issues. Electron microscopy revealed that plastic rich samples were significantly smoother, enhancing their flowability compared to the rougher, paper rich materials. Conclusions: This study establishes critical material handling baselines for processing MSW as a viable feedstock for fuel and chemical production. The findings highlight the importance of optimizing particle size and feedstock composition to improve flowability and handling performance.

09 BIOMASS FUELS↗

Solution synthesis of two-dimensional zinc oxide (ZnO)/molybdenum disulfide (MoS 2 ) heterostructure through reactive templating for enhanced visible-light degradation of rhodamine B

Numerous inorganic materials have been identified as potential candidates for high-performance photocatalysts. However, their solar-to-energy conversion efficiencies still fail to meet commercial requirements. Here, the main hurdle is the rapid recombination of photoexcited electrons and holes in single-phase materials. A viable predicted approach to suppress charge recombination is coupling two materials to form a two-dimensional (2D) heterostructure that physically separates photoinduced electrons and holes in different layers. In this work, the heterostructure-based paradigm was tested and a scalable solution synthesis of epitaxial ZnO-MoS 2 heterostructure was developed. A 2D ZnO-MoS 2 heterostructure was synthesized under hydrothermal conditions by stabilizing intermediate Zn-hydroxide states on a functionalized MoS 2 surface. Detailed characterization showed the formation of multilayer heterostructure with MoS 2 flakes intercalated between large size ZnO plates. The performance of this heterostructure was evaluated using photocatalytic degradation of rhodamine B. A degradation efficiency of 70% was measured within 90 minutes of visible-light irradiation, almost doubling the efficiency of the corresponding single-phase materials or their physical mixtures.

2D heterostructure↗