Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface layering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Solid sulfur in vacuum: Sublimation effects on surface microtexture, color and spectral reflectance, and applications to planetary surfaces

A form of sulfur that is white at room temperature and very fluffy in texture has been found in laboratory experiments on the effects of vacuum sublimation (evaporation) on solid sulfur. This work is an outgrowth of proton sputtering experiments on sulfur directed toward understanding Jovian magnetospheric effects on the surface of Io. Fluffy white sulfur is formed on the surface of solid yellow, tan, or brown sulfur melt freezes in vacuum by differential (fractional) evaporation of two or more sulfur molecular species present in the original sulfur; S(8) ring sulfur is thought to be the dominant sublimination phase lost to the vacuum sink, and polymeric chain sulfur S(u) the dominant residual phase that remains in place, forming the residual fluffy surface layer. The reflectance spectrum of the original sulfur surface is greaty modified by formation of the fluffy layer: the blue absorption band-edge and shoulder move 0.05 to 0.06 microns toward shorter wavelengths resulting in a permanent increase in reflectivity near 0.42 to 0.46 microns; the UV reflectivity below 0.40 microns is reduced. This form of sulfur should exist in large quantity on the surface of Io, especially in hotspot regions if there is solid free sulfur there that has solidified from a melt. Its color and spectra will indicate relative crystallization age on a scale of days to months and/or surface temperature distribution history.

Nash, D. B.↗

Formation mechanism of an α2 phase-rich layer on the surface of Ti-22Al-25Nb alloy

Highlights: • This paper reports the formation mechanism of a α{sub 2}-rich layer on the surface of the Ti-22Al-25Nb alloy. • The α{sub 2}-rich layer is significantly harder than the alloy interior. • The α{sub 2}-rich layer is formed owing to the Ti{sub 2}O{sub 3} particles produced by oxygen infiltration at the surface. • The relative orientation of the α{sub 2} and Ti{sub 2}O{sub 3} phases is (1–100)α{sub 2}//(1–100)Ti{sub 2}O{sub 3}. - Abstract: In order to investigate the formation mechanism of the α{sub 2}-rich layer in the surface of the Ti-22Al-25Nb alloy, systematic analyses are carried out on the surface of the alloy by using SEM, XRD and EBSD. The results reveal that this α{sub 2}-rich layer is formed by oxidation of the surface layer. In this surface oxidation layer, there are abundant Ti{sub 2}O{sub 3} particles similar with the α{sub 2} phase in structure. These Ti{sub 2}O{sub 3} particles serve as nucleation points and lower the nucleation energy of the α{sub 2} phase, promoting the precipitation and growth of α{sub 2} phase on the surface layer of the alloy. This surface layer has a hardness of 684 HV, significantly exceeding the value of 312 HV for the interior of the alloy and thus considerably improves the surface properties of the alloy, serving as a high-performance, self-generated surface strengthening layer.

36 MATERIALS SCIENCE↗

Thermodynamic Behavior of Nano-sized Gold Clusters on the (001) Surface

We have studied thermal expansion of the surface layers of the hexagonally reconstructed Au (001) surface using a classical Molecular Dynamics (MD) simulation technique with an Embedded Atomic Method (EAM) type many-body potential. We find that the top-most hexagonal layer contracts as temperature increases, whereas the second layer expands or contracts depending on the system size. The magnitude of expansion coefficient of the top layer is much larger than that of the other layers. The calculated thermal expansion coefficients of the top-most layer are about -4.93 x 10(exp -5)Angstroms/Kelvin for the (262 x 227)Angstrom cluster and -3.05 x 10(exp -5)Angstroms/Kelvin for (101 x 87)Angstrom cluster. The Fast Fourier Transform (FFT) image of the atomic density shows that there exists a rotated domain of the top-most hexagonal cluster with rotation angle close to 1 degree at temperature T less than 1000Kelvin. As the temperature increases this domain undergoes a surface orientational phase transition. These predictions are in good agreement with previous phenomenological theories and experimental studies.

Paik, Sun M.↗

Near Surface Vapor Bubble Layers in Buoyant Low Stretch Burning of Polymethylmethacrylate

Large-scale buoyant low stretch stagnation point diffusion flames over solid fuel (polymethylmethacrylate) were studied for a range of aerodynamic stretch rates of 2-12/ sec which are of the same order as spacecraft ventilation-induced stretch in a microgravity environment. An extensive layer of polymer material above the glass transition temperature is observed. Unique phenomena associated with this extensive glass layer included substantial swelling of the burning surface, in-depth bubble formation, and migration and/or elongation of the bubbles normal to the hot surface. The bubble layer acted to insulate the polymer surface by reducing the effective conductivity of the solid. The reduced in-depth conduction stabilized the flame for longer than expected from theory neglecting the bubble layer. While buoyancy acts to move the bubbles deeper into the molten polymer, thermocapillary forces and surface regression both act to bring the bubbles to the burning surface. Bubble layers may thus be very important in low gravity (low stretch) burning of materials. As bubbles reached the burning surface, monomer fuel vapors jetted from the surface, enhancing burning by entraining ambient air flow. Popping of these bubbles at the surface can expel burning droplets of the molten material, which may increase the fire propagation hazards at low stretch rates.

Olson, Sandra L.↗

A Warm Garage for a Lunar Rover

Approach: One approach to heating a rover during the lunar night is the so-called thermal wadis concept [1]. This involves heating the regolith with solar concentrators and placing the rover on the heated surface for the night. Since the regolith is heated by a relatively weak heat flux, a high thermal conductivity is required for heating a sufficiently large mass of regolith. However, lunar regolith has a low thermal conductivity. Therefore, the concept involves increasing the conductivity by sintering the regolith, which requires a significant energy input and complex procedures. Here we propose an alternative approach where the low thermal conductivity of regolith is an advantage. Specifically, we propose to use a highly exothermic combustible mixture for heat generation. The mixture pellets are placed in the surface layer of regolith and ignited. The combustion forms condensed products and releases heat, which then slowly spreads to the surrounding regolith. Heat can also be transferred, for example, by heat pipes, into radiant heating surfaces installed on the ground. A greenhouse that transmits sunlight during the day and decreases the radiative heat losses during the night can also be installed. Selection of the Heat-generating Mixture: The reactive mixture should have a high specific energy and generate only condensed products since gases could disturb the regolith layer, carry enthalpy out of the system, and lead to an explosion. There are mixtures, (sometimes called pyrolants) that possess very high specific energies. One example is magnesium-Teflon-Viton mixtures used in flares. However, they produce gases and may cause explosions. Other mixtures that include magnesium cannot be used either because of the high vapor pressure of Mg at temperatures well below the combustion temperature. Recently, mixtures that involve lithium peroxide (Li2O2) have been proposedfor using in space power systems [2]. However, they produce lithium oxide (Li2O), which boils at 2800 K at 1 atm and hence at a lower temperature in vacuum. Fortunately, there exist many mixtures that release a lot of heat and form only condensed products during the combustion. Many such mixtures have been used for self-propagating high-temperature synthesis (SHS) of various materials [3, 4]. For the application discussed here, t itanium/boron (1:2 mole ratio) mixture appears to be particularly promising. The specific energy is 4.0 MJ/kg (1.1 kWh/kg), the adiabatic flame temperature is about 3200 K, and the reaction forms solid titanium diboride (TiB2, melting point: 3500 K). The mixture can be ignited easily with a heated tungsten wire, and it has been used widely as a booster to ignite the main mixture in the SHS process.Estimates: Assuming that specific heat of regolith is 500 J/(kg∙K) [5] and all generated heat is transferred to regolith, 12.5 kg of the Ti/B mixture would increase the temperature of 1000 kg of regolith by 100 K. To evaluate the rate of heat transfer in the regolith, a spherical model was analyzed where the heat released by a 12.5 kg Ti/B core propagates by thermal conduction through a 1000 kg regolith shell with no heat loss from its outer surface. At a bulk density of 1500 kg/m3 [5], the radius of the shell was 54 cm, while the radius of the core was about 11 cm. The calculations were conducted using Thermal Desktop SINDA/FLUINT (Cullimore and Ring Technologies) software at two constant values of bulk thermal conductivityk of the regolith: 0.001 and 0.01 W/(m∙K). The results show that after 14.5 days the core lost 31% of the released heat at the lower k and 77% at the higher k. At a distance of 20 cm from the core surface, the temperature of the regolith increased by only 1 K at the lower k and by 132 K at the higher k. In reality, the regolith near the heat source will be melted, so its thermal conductivity will increase significantly. Nevertheless, the conducted estimates indicate that combustion-based heat generators, placed directly in the regolith, could provide heat during a rather long period such as the lunar night.Conclusion: Heat generators based on gasless combustion of highly energetic reactive mixtures could be installed directly in the surface layer of lunar regolith. Because of the low thermal conductivity of the regolith, such generators would keep thermal energy for days and gradually supply heat to a rover/lander.Acknowledgment: The material presented in this work is based upon the work supported by National Aeronautics and Space Administration (NASA) under Grant #80NSSC20K0293.References: [1] Balasubramaniam R. et al. (2011) J. Thermophys. Heat Trans., 25,130−139. [2] Blair R.G. and Vasu S.S. (2022) Conf. Advanced Power Systems for Deep Space Exploration. [3] Varma A. et al. (1998) Adv. Chem. Eng., 24,79−226. [4] Levashov E.A. et al. (2017) Int. Mater. Rev., 62,203−239. [5] Wood-Robinson R. et al. (2019) J. Geophys. Res. Planets, 124, 1989−2011.

lunar↗

Two-step synthesis of few layer graphene using plasma etching and atmospheric pressure rapid thermal annealing

A two-step process using halogen based plasma etching combined with atmospheric pressure rapid thermal annealing has been used to synthesize few layer graphene films on 6H-SiC (0001) surfaces. In this process, the 6H-SiC substrates were etched under different plasma conditions to produce a carbon rich surface layer. This was followed by rapid thermal annealing in a flow of atmospheric pressure Ar to produce the graphene films. The effects of different etching conditions, heating rates, and average and maximum annealing temperatures were investigated. Changes in surface and near-surface composition after each step were characterized by x-ray photoelectron spectroscopy and overall film quality was assessed using Raman spectroscopy. Film defects associated with this synthesis method included a buffer layer between the SiC substrate and graphene as well as oxygen-based defects on the graphene surface. Electrical characterization of these films was performed using both two and four point methods. In the two point measurements, these films exhibited back-to-back Schottky behavior from which the Schottky barrier height, carrier density and mobility were determined. The four point measurements were used to determine the contact and film resistivity as well as the transfer length.

36 MATERIALS SCIENCE↗

Chamber wall interactions with HBr/Cl{sub 2}/O{sub 2} plasmas

The authors have studied the interaction of HBr/Cl{sub 2}/O{sub 2} inductively coupled plasmas with reactor chamber wall deposits, with and without Si etching, using the “spinning wall” technique. The spinning wall is part of the reactor chamber walls, allowing near-real-time analysis of the composition of surface layers via Auger electron spectrometry and determination of species desorbing off the walls by mass spectrometry. In HBr plasmas with no bias voltage on the Si substrate, and hence no Si etching, HBr is ∼30% dissociated, and H{sub 2} and Br{sub 2} form in the plasma. Layers deposited on the reactor chamber contained little if any Br under these conditions. Adding O{sub 2} to an HBr plasma leads to formation of H{sub 2}O and increased Br{sub 2} (compared to a pure HBr plasma) products that desorb from the spinning wall. H{sub 2}O has a very long residence time on the surface. With bias voltage applied to the Si substrate in an HBr plasma, mass spectrometer signals are prominent for SiBr and SiBr{sub 3}, and weaker for SiBr{sub 2}, SiBr{sub 4}, Si{sub 2}Br{sub 4}, Si{sub 2}Br{sub 5}, and Si{sub 2}OBr{sub 5}. Under these conditions, a SiO{sub x}Br{sub y} layer deposits on the spinning wall. Adding 20% O{sub 2} to HBr stops etching and eliminates Br from the surface layer, indicating that Br on the reactor walls is a result of SiBr{sub x} impingement and not from bromination by impinging Br. With HBr/Cl{sub 2} plasmas and no bias on the stage, a SiO{sub x}Cl{sub y} layer deposits, and no Br is detected. HCl, BrCl, and Br{sub 2} were detected in the line-of-sight leak, around the spinning wall, of a HBr/Cl{sub 2} (1:1) gas mixture in the absence of a plasma. Residence time analysis of species in the chamber and a change in the product distribution with a change in the composition of the layer deposited on the chamber wall suggest that reactions forming these products in the absence of a plasma occur on the reactor walls. With a plasma and bias on the Si substrate, both Br and Cl incorporate in the layer, and a rich spectrum with numerous SiCl{sub x}Br{sub y} peaks was observed up to at least 500 amu. The spectrum does not change with the addition of 6% O{sub 2}. Adding 20% O{sub 2} suppresses Br adsorption, but Cl still adsorbs. In 40% O{sub 2}/HBr/Cl{sub 2} plasmas with stage bias, Cl adsorption also ceases and no etching products are observed in the mass spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pore radius fine tuning of a silica matrix (MCM-41) based on the synthesis of alumina nanolayers with different thicknesses by atomic layer deposition

The authors investigated a new approach to modify the surface of the mesoporous silica matrix MCM-41. This approach is based on manipulating the chemical composition of the porous surface layer and also on fine tuning the pore radius by applying the atomic layer deposition (ALD) technique. The synthesis of alumina nanolayers was performed on the planar and the porous matrix (MCM-41) by the ALD technique using aluminum tri-sec-butoxide and water as precursors. The authors show that one cycle on silicon, using aluminum tri-sec-butoxide and water as precursors, results in a 1–1.2 Å increase in alumina nanolayer thickness. This is comparable to the increase in thickness per cycle for other precursors such as trimethylaluminum and aluminum chloride. The authors show that the synthesis of an Al{sub 2}O{sub 3} nanolayer on the pore surface of the mesoporous silica matrix MCM-41 by the ALD technique results in a regular change in the porous structure of the samples. The specific porosity (ml/g) of the MCM-41 was 0.95 and that of MCM-41 after 5 ALD cycles was 0.39. The pore diameter (nm) of MCM-41 was 3.3 and that of MCM-41 after 5 ALD cycles was 2.3.

42 ENGINEERING↗

Effects of Fine Particle Shot Peening Treatment on Fatigue Properties of Al-7Si-0.3Mg Alloy

In this study, two different fine particle shot peening (FPSP) treatments were performed on Al-7Si-0.3Mg alloy specimens to evaluate their effects on fatigue properties. After the treatment, the microstructure morphology of the specimens was observed, and the surface roughness and residual stress distribution were measured. Rotating bending fatigue tests were conducted, and the fatigue fracture surfaces were observed using scanning electron microscopy (SEM). The crack initiation and propagation behavior were investigated using the replica method. The results indicate that FPSP can introduce residual stress on the surface layer of the material and refine the surface microstructure, and also change the surface roughness. At low stress amplitude levels, FPSP can improve fatigue life significantly. At 5 × 10{sup 7} cycles, the fatigue strength of shot-peened specimens increased by 33% compared to unpeened specimens. In unpeened and steel shot-peened (SSP) specimens, both crystal slip and casting defects can induce fatigue failure, while only casting defects can cause failure in the case of ceramic shot-peened (CSP) specimens. Moreover, FPSP can move the crack initiation site to the subsurface from the surface. The range of threshold stress intensity factor of the material can be improved significantly by this treatment. Casting defects have a significant influence on fatigue strength; the effect on fatigue strength can be well evaluated by the modified Murakami equation.

36 MATERIALS SCIENCE↗

Formation of a super-dense hydrogen monolayer on mesoporous silica

Adsorption on various adsorbents of hydrogen and helium at temperatures close to their boiling points shows, in some cases, unusually high monolayer capacities. The microscopic nature of these adsorbate phases at low temperatures has, however, remained challenging to characterize. Here, using high-resolution cryo-adsorption studies together with characterization by inelastic neutron scattering vibration spectroscopy, we show that, near its boiling point (~20 K), H 2 adsorbed on a well-ordered mesoporous silica forms a two-dimensional monolayer with a density more than twice that of bulk-solid H 2 , rather than a bilayer. Theoretical studies, based on thorough first-principles calculations, rationalize the formation of such a super-dense phase. The strong compression of the hydrogen surface layer is due to the excess of surface–hydrogen attraction over intermolecular hydrogen repulsion. Use of this super-dense hydrogen monolayer on an adsorbent might be a feasible option for the storage of hydrogen near its boiling point, compared with adsorption at 77 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective laser sintering and spark plasma sintering of (Zr,Nb,Ta,Ti,W)C compositionally complex carbide ceramics

Abstract Two advanced manufacturing processes, spark plasma sintering (SPS) and selective laser sintering (SLS), have been developed for synthesis of (Zr,Nb,Ta,Ti,W)C compositionally complex carbide (CCC) via reactive sintering of a powder mixture of constitute monocarbides. X‐ray diffraction analysis confirmed that the single‐phase CCC can be formed by both SPS and SLS. While a homogenous microstructure with uniform metal element distributions was developed during SPS, three‐layer microstructures with a thin TiC‐rich layer and two TaC‐rich layers along with a TiO 2 ‐rich surface layer containing W nanoparticles were formed during SLS. In addition, cellular structures with W, Zr, and Ti element segregation and dislocations on cell boundaries were observed in the SLS‐CCC sample, indicating the effect of nonequilibrium conditions on microstructure formation during laser melting followed by rapid cooling and solidification process. Compared to the SPS‐CCC sample, the SLS‐CCC showed enhanced hardness and reduced thermal conductivity, which may be related to their unique cellular structures.

36 MATERIALS SCIENCE↗

Nitriding of titanium and titanium: 8 percent aluminum, 1 percent molybdenum, 1 percent vanadium alloy with an ion-beam source

Titanium and Ti-8Al-1Mo-1V alloy were nitrided with an ion-beam source of nitrogen or argon and nitrogen at a total pressure of 2 x 10 to the minus 4th power to 10 x 10 to the minus 4th power torr. The treated surface was characterized by surface profilometry, X-ray diffractometry, Auger electron spectroscopy and microhardness measurements. The tetragonal Ti2N phase formed in pure titanium and Ti-8Al-1Mo-1V alloy with traces of AlN in the alloy. Two opposite processes competed during the ion-beam-nitriding process: (1) formation of nitrides in the surface layer and (2) sputtering of the nitrided layers by the ion beam. The highest surface hardnesses, about 500 kg/sq mm in titanium and 800 kg/sq mm in Ti-8Al-1Mo-1V, were obtained by ion nitriding with an ion beam of pure nitrogen at 4.2 x 10 to the minus 4th power torr at a beam voltage of 1000 V.

Gill, A.↗

Influence of the microstructure on the corrosion behavior of magnetron sputter-quenched amorphous metallic alloys

The microstructure and corrosion behavior of magnetron sputter deposited amorphous metallic films of (Mo6ORu40)82B18 under varying sputtering atmospheres have been investigated. The microstructural details and topology of the films have been studied by scanning electron microscopy and correlated with the deposition conditions. By reducing the pressure of pure argon gas, the characteristic features of rough surface and columnar growth full of vertical voids can be converted into a mirror-smooth finish with very dense deposits. Films deposited in the presence of O2 or N2 exhibit columnar structure with vertical voids. Film deposited in pure argon at low pressure show remarkably high corrosion resistance due to the formation of a uniform passive surface layer. The influence of the microstructure and surface texture on the corrosion behavior is discussed.

Thakoor, A. P.↗

Oscillations of drops in zero gravity with weak viscous effects

Nonlinear oscillations and other motions of large axially symmetric liquid drops in zero gravity are studied numerically by a boundary-integral method. The effect of small viscosity is included in the computations by retaining first-order viscous terms in the normal stress boundary condition. This is accomplished by making use of a partial solution of the boundary-layer equations which describe the weak vortical surface layer. Small viscosity is found to have a relatively large effect on resonant mode coupling phenomena.

Lundgren, T. S.↗

Satellite Altimetry for a Global Ocean Observing System

Space-age technologies have made satellite remote sensing a powerful new tool to study the Earth on a global scale. However, the opacity of the ocean to electromagnetic sensing has limited spaceborne measurements to the properties of the surface layer of the ocean (such as sea surface temperature and color). The radar altimetric measurement of the height of the sea surface relative to the geoid, the dynamic topography of the ocean, is a very useful quantity for studying the circulation of the ocean. The ability of measuring dynamic topography from space makes satellite altimetry a uniquely useful remote sensing technique because dynamic topography reflects oceanic processes not only at the surface but at depths as well. A simple analysis shows that a one centimeter tilt in the dynamic topography is associated with a mass transport of 1-7 Sv (1Sv= 1 million tons per second) in the open ocean depending on the vertical distribution of current velocity. Such a magnitude is an appreciable fraction of the transport of the Florida Current (circa 30 Sv), for instance. TOPEX/POSEIDON has demonstrated the capability of measuring the time variation of sea level with accuracy approaching to 2 cm when the data are averaged over boxes with several hundred kilometers on each side. The data set has been used for studying ocean circulation phenomena with a wide range of scales, ranging from fast-changing barotropic variability to seasonal and interannual variability such as El Nino and La Nina. The long record of precise measurement of global sea level has also showed great promise for monitoring the variation of mean sea level, an effective indicator of global climate change. Continuation of satellite altimetry missions with capability matching or better than that of TOPEX/POSEIDON should be included as a key component of a Global Ocean Observing System. NASA and CNES have committed to continuing the measurement of TOPEX/POSEIDON with a series of follow-on missions called Jason. The first of the series, Jason-1, is scheduled for launch in May, 2000. Such a series of missions will provide a key data stream for both research and practical applications and benefit the objectives of global programs such as CLIVAR and GODAE.

Fu, Lee-Lueng↗

An operational large-scale marine planetary boundary layer model

A marine planetary boundary layer (PBL) model is presented and compared with data from sea-based experiments. The PBL model comprises two layers, the outer an Ekman-Taylor layer with stratification-dependent secondary flow, and the logarithmic surface layer corrected for stratification and humidity effects and variable surface roughness. Corrections are noted for air much warmer than water in stable conditions and for low wind speeds. The layers are analytically defined along with similarity relations and a resistance law for inclusion in a program. An additional interfacial layer correction is developed and shown to be significant for heat flux calculations. Experimental data from GOASEX were used to predict the windfield in the Gulf of Alaska, and JASIN data was used for windfields SE of Iceland. The JASIN-derived wind field predictions were accurate to within 1 m/sec and 10 deg in a 200 km triangle.

Brown, R. A.↗

Integrated Instrument Simulator Suites for Earth Science

The NASA Earth Observing System Simulators Suite (NEOS3) is a modular framework of forward simulations tools for remote sensing of Earth's Atmosphere from space. It was initiated as the Instrument Simulator Suite for Atmospheric Remote Sensing (ISSARS) under the NASA Advanced Information Systems Technology (AIST) program of the Earth Science Technology Office (ESTO) to enable science users to perform simulations based on advanced atmospheric and simple land surface models, and to rapidly integrate in a broad framework any experimental or innovative tools that they may have developed in this context. The name was changed to NEOS3 when the project was expanded to include more advanced modeling tools for the surface contributions, accounting for scattering and emission properties of layered surface (e.g., soil moisture, vegetation, snow and ice, subsurface layers). NEOS3 relies on a web-based graphic user interface, and a three-stage processing strategy to generate simulated measurements. The user has full control over a wide range of customizations both in terms of a priori assumptions and in terms of specific solvers or models used to calculate the measured signals.This presentation will demonstrate the general architecture, the configuration procedures and illustrate some sample products and the fundamental interface requirements for modules candidate for integration.

emission↗

Integrated Instrument Simulator Suites for Earth Science

The NASA Earth Observing System Simulators Suite (NEOS3) is a modular framework of forward simulations tools for remote sensing of Earth's Atmosphere from space. It was initiated as the Instrument Simulator Suite for Atmospheric Remote Sensing (ISSARS) under the NASA Advanced Information Systems Technology (AIST) program of the Earth Science Technology Office (ESTO) to enable science users to perform simulations based on advanced atmospheric and simple land surface models, and to rapidly integrate in a broad framework any experimental or innovative tools that they may have developed in this context. The name was changed to NEOS3 when the project was expanded to include more advanced modeling tools for the surface contributions, accounting for scattering and emission properties of layered surface (e.g., soil moisture, vegetation, snow and ice, subsurface layers). NEOS3 relies on a web-based graphic user interface, and a three-stage processing strategy to generate simulated measurements. The user has full control over a wide range of customizations both in terms of a priori assumptions and in terms of specific solvers or models used to calculate the measured signals.This presentation will demonstrate the general architecture, the configuration procedures and illustrate some sample products and the fundamental interface requirements for modules candidate for integration.

radiative transfer↗