Search NASA⌕ Search

SEARCH · Search NASA

Results for “variational optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Spatial and temporal temperature distribution optimization for a geostationary antenna

The Geostationary Microwave Precipitation Radiometer antenna is considered and a thermal design analysis is performed to determine a design that would minimize on-orbit antenna temporal and spatial temperature gradients. The final design is based on an optically opaque radome which covered the antenna. The average orbital antenna temperature is found to be 9 C with maximum temporal and spatial variations of 34 C and 1 C, respectively. An independent thermal distortion analysis showed that this temporal variation would give an antenna figure error of 14 microns.

Tsuyuki, G.↗

STOP Analysis and Optimization of a Very-Low-Distortion Space Instrument: HST WFC3 Case Study

New generation optical instruments with very demanding stability requirements are being proposed and developed for space applications. STOP (Structural-Thermal-Optical Performance) analysis and optimization is crucial in meeting the very tight distortion budgets of these instruments. This presentation outlines STOP analysis and optimization approach in the context of WFC3 (Wide-Field Camera 3), which is a radial instrument designed to replace the Wide-Field Planetary Camera 2 (WFPC2) of the Hubble Space Telescope (HST). WFC3 houses two separate channels, UVIS and IR, and will have greater throughput and sensitivity than WFPC2. WFC3 line-of-sight alignment budget for the UVIS and IR channels are as small as 10 and 20 milli-arcsec, respectively. Its optical bench is the most critical subsystem effecting the optical stability of WFC3 hence our effort concentrates on the design and analysis of the bench and its interfaces. Structural analysis has accompanied the mechanical design of the bench since the initial concept study. A high fidelity structural Finite Element Model (FEM) of the bench has been developed and used for minimizing its thermally induced distortions as well as sizing it to meet the stiffness and strength requirements of a Shuttle launch. The bench is a composite honeycomb panel box structure with a very low planar Coefficient of Thermal Expansion (CTE) of approximately 0.1 ppm/C. Optic components are mounted to super-INVAR inserts bonded into the panels. The bench is kinematically supported on three HST latches via interface struts, which are tailored to exhibit negative CTE to cancel out the thermal motions of the latches. The interface struts also incorporate flexure elements to minimize the mechanical distortions coming into the bench from its enclosure. Bench FEM is coupled with the enclosure FEM to quantify these effects. Short term or on-orbit STOP analysis includes distortion due to the temperature variations of the bench, the struts, and the enclosure. Long term or ground-to-orbit STOP analysis includes distortional effects of gravity release, desorption, and assembly in addition to the ground-to-orbit temperature variations. A rigorous testing program has been implemented for verifying the material properties and the analysis predictions. STOP analysis results demonstrate that both the short-term and the long-term alignment budgets will be met. Presentation will cover design and analysis details that are critical to a successful implementation of the STOP analysis and optimization process.

Kunt, Cengiz↗

Quantum-Compatible Variational Segmentation for Image-to-Image Wildfire Detection Using Satellite Data

Wildfire occurrences have been increasing for the past decade, leaving devastating traces across the world. In the recent efforts, remote sensing and airborne missions have been utilized to better understand and manage wildfires. This has resulted in an exponential increase in volume of remote sensing data, which has pushed the need for intelligent automation of data extraction for wildfire studies. Machine learning offers accurate automation in detecting such natural anomalies and enable decision-makers to take actions in a timely manner. Recent advances in machine learning algorithms, namely probabilistic generative methods, allow researchers and decisionmakers to step beyond detection and study “what-if” scenarios for wildfire occurrences. Additionally, they offer better imitations to the stochastic behavior of nature, and wildfire events. However, optimizing the performance of these probabilistic generative models is a computationally expensive process, specially using digital computers. On the other hand, quantum computers have recently shown a promise to reduce computationally costly training of such models and provide performance improvements. There is a body of research investigating the potential for improved machine learning methods in which key operations are performed on a quantum computer. In this study, we propose a probabilistic image-toimage segmentation approach combining a very well-known segmentation method, U-NET, with a Conditional Variational Auto-Encoder (CVAE) to not only detect wildfires but also describe the stochasticity of the phenomenon and be capable of running “what-if” scenarios. Our proposed model is compatible with training on quantum computers, which results in a quantum-assisted image-to-image segmentation approach and can be used to benchmark the potential benefit of quantum computing over the classical one.

quantum↗

Maximum principle solutions for time-optimal half-loop maneuvers of a high alpha fighter aircraft

An investigation was conducted of maximum principle solutions for an initial 0.6 Mach number and 15,000-ft altitude. The authors generate these solutions for a family of prescribed final times tf, starting with tf = 0.5 s. Using a nonlinear wind-tunnel model they construct maximum principle solutions. Above tf = 1.2 s some small nonlinear variations in the aerodynamic pitching moment coefficient presented difficulty with respect to numerical convergence. This was circumvented by fitting analytical models to the aerodynamic coefficients of the wind-tunnel model at Mach 0.4. Maximum principle solutions of the analytical model are shown to compare well with those obtained for tf of less than 1.2 s. Using the analytical model the authors extended the prescribed final time to a value of 13.65 s at which time the aircraft completes the half-loop maneuver. This is 0.53 s longer than that obtained using the singular perturbation feedback control law.

Stalford, Harold↗

On the accuracy of least squares methods in the presence of corner singularities

Elliptic problems with corner singularities are discussed. Finite element approximations based on variational principles of the least squares type tend to display poor convergence properties in such contexts. Moreover, mesh refinement or the use of special singular elements do not appreciably improve matters. It is shown that if the least squares formulation is done in appropriately weighted space, then optimal convergence results in unweighted spaces like L(2).

Cox, C. L.↗

Development and testing of stable, invariant, isoparametric curvilinear 2- and 3-D hybrid-stress elements

Linear and quadratic Serendipity hybrid-stress elements are examined in respect of stability, coordinate invariance, and optimality. A formulation based upon symmetry group theory successfully addresses these issues in undistorted geometries and is fully detailed for plane elements. The resulting least-order stable invariant stress polynomials can be applied as astute approximations in distorted cases through a variety of tensor components and variational principles. A distortion sensitivity study for two- and three-dimensional elements provides favorable numerical comparisons with the assumed displacement method.

Punch, E. F.↗

Galerkin approximation for inverse problems for nonautonomous nonlinear distributed systems

An abstract framework and convergence theory is developed for Galerkin approximation for inverse problems involving the identification of nonautonomous nonlinear distributed parameter systems. A set of relatively easily verified conditions is provided which are sufficient to guarantee the existence of optimal solutions and their approximation by a sequence of solutions to a sequence of approximating finite dimensional identification problems. The approach is based on the theory of monotone operators in Banach spaces and is applicable to a reasonably broad class of nonlinear distributed systems. Operator theoretic and variational techniques are used to establish a fundamental convergence result. An example involving evolution systems with dynamics described by nonstationary quasilinear elliptic operators along with some applications are presented and discussed.

Banks, H. T.↗

A Neural Network Aero Design System for Advanced Turbo-Engines

An inverse design method calculates the blade shape that produces a prescribed input pressure distribution. By controlling this input pressure distribution the aerodynamic design objectives can easily be met. Because of the intrinsic relationship between pressure distribution and airfoil physical properties, a Neural Network can be trained to choose the optimal pressure distribution that would meet a set of physical requirements. Neural network systems have been attempted in the context of direct design methods. From properties ascribed to a set of blades the neural network is trained to infer the properties of an 'interpolated' blade shape. The problem is that, especially in transonic regimes where we deal with intrinsically non linear and ill posed problems, small perturbations of the blade shape can produce very large variations of the flow parameters. It is very unlikely that, under these circumstances, a neural network will be able to find the proper solution. The unique situation in the present method is that the neural network can be trained to extract the required input pressure distribution from a database of pressure distributions while the inverse method will still compute the exact blade shape that corresponds to this 'interpolated' input pressure distribution. In other words, the interpolation process is transferred to a smoother problem, namely, finding what pressure distribution would produce the required flow conditions and, once this is done, the inverse method will compute the exact solution for this problem. The use of neural network is, in this context, highly related to the use of proper optimization techniques. The optimization is used essentially as an automation procedure to force the input pressure distributions to achieve the required aero and structural design parameters. A multilayered feed forward network with back-propagation is used to train the system for pattern association and classification.

Sanz, Jose M.↗

A linear feedback guidance law for an Aeromaneuvering Orbit-to-Orbit Shuttle

The sensitivity of the trajectory of an Aeromaneuvering Orbit-to-Orbit Shuttle (AMOOS) to unpredictable variations in atmospheric density is shown and a compensating guidance law is developed. The sensitivity was determined using a varying atmosphere model whose statistical properties matched those of actual atmosphere data. This study showed that a compensating guidance law is crucial to the feasibility of AMOOS. Using an optimal regulator approach, a linear feedback law for bank angle was developed and checked out with the atmosphere model. This law uses the altitude profile of the trajectory to control the amount of energy dissipated within the atmosphere.

Rehder, J. J.↗

Scheduling Tasks In Parallel Processing

Algorithms sought to minimize time and cost of computation. Report describes research on scheduling of computations tasks in system of multiple identical data processors operating in parallel. Computational intractability requires use of suboptimal heuristic algorithms. First algorithm called "list heuristic", variation of classical list scheduling. Second algorithm called "cluster heuristic" applied to tightly coupled tasks and consists of four phases. Third algorithm called "exchange heuristic", iterative-improvement algorithm beginning with initial feasible assignment of tasks to processors and periods of time. Fourth algorithm is iterative one for optimal assignment of tasks and based on concept called "simulated annealing" because of mathematical resemblance to aspects of physical annealing processes.

Price, Camille C.↗

A Few Good Crystals Please

Part of the challenge of macromolecular crystal growth for structure determination is obtaining an appropriate number of crystals with a crystal volume suitable for X-ray analysis. In this respect an understanding of the effect of solution conditions on macromolecule nucleation rates is advantageous. This study investigated the effects of solution conditions on the nucleation rate and final crystal size of two crystal systems; tetragonal lysozyme and glucose isomerase. Batch crystallization plates were prepared at given solution concentration and incubated at set temperatures over one week. The number of crystals per well with their size and axial ratios were recorded and correlated with solution conditions. Duplicate experiments indicate the reproducibility of the technique. Results for each system showing the effect of supersaturation, incubation temperature and solution pH on nucleation rates will be presented and discussed. In the case of lysozyme, having optimized solution conditions to produce an appropriate number of crystals of a suitable size, a batch of crystals were prepared under exactly the same conditions. Fifty of these crystals were analyzed by x-ray techniques. The results indicate that even under the same crystallization conditions, a marked variation in crystal properties exists.

Judge, Russell A.↗

A Quantitative Study of Oxygen as a Metabolic Regulator

An acute reduction in oxygen delivery to a tissue is associated with metabolic changes aimed at maintaining ATP homeostasis. However, given the complexity of the human bio-energetic system, it is difficult to determine quantitatively how cellular metabolic processes interact to maintain ATP homeostasis during stress (e.g., hypoxia, ischemia, and exercise). In particular, we are interested in determining mechanisms relating cellular oxygen concentration to observed metabolic responses at the cellular, tissue, organ, and whole body levels and in quantifying how changes in tissue oxygen availability affect the pathways of ATP synthesis and the metabolites that control these pathways. In this study; we extend a previously developed mathematical model of human bioenergetics, to provide a physicochemical framework that permits quantitative understanding of oxygen as a metabolic regulator. Specifically, the enhancement - sensitivity analysis - permits studying the effects of variations in tissue oxygenation and parameters controlling cellular respiration on glycolysis, lactate production, and pyruvate oxidation. The analysis can distinguish between parameters that must be determined accurately and those that require less precision, based on their effects on model predictions. This capability may prove to be important in optimizing experimental design, thus reducing use of animals.

Radhakrishnan, Krishnan↗

A quantitative study of oxygen as a metabolic regulator

An acute reduction in oxygen delivery to a tissue is associated with metabolic changes aimed at maintaining ATP homeostasis. However, given the complexity of the human bioenergetic system, it is difficult to determine quantitatively how cellular metabolic processes interact to maintain ATP homeostasis during stress (e.g., hypoxia, ischemia, and exercise). In particular, we are interested in determining mechanisms relating cellular oxygen concentration to observed metabolic responses at the cellular, tissue, organ, and whole body levels and in quantifying how changes in tissue oxygen availability affect the pathways of ATP synthesis and the metabolites that control these pathways. In this study, we extend a previously developed mathematical model of human bioenergetics, to provide a physicochemical framework that permits quantitative understanding of oxygen as a metabolic regulator. Specifically, the enhancement--sensitivity analysis--permits studying the effects of variations in tissue oxygenation and parameters controlling cellular respiration on glycolysis, lactate production, and pyruvate oxidation. The analysis can distinguish between parameters that must be determined accurately and those that require less precision, based on their effects on model predictions. This capability may prove to be important in optimizing experimental design, thus reducing use of animals.

Non-programmatic↗

Reduction of Subjective and Objective System Complexity

Occam's razor is often used in science to define the minimum criteria to establish a physical or philosophical idea or relationship. Albert Einstein is attributed the saying "everything should be made as simple as possible, but not simpler". These heuristic ideas are based on a belief that there is a minimum state or set of states for a given system or phenomena. In looking at system complexity, these heuristics point us to an idea that complexity can be reduced to a minimum. How then, do we approach a reduction in complexity? Complexity has been described as a subjective concept and an objective measure of a system. Subjective complexity is based on human cognitive comprehension of the functions and inter relationships of a system. Subjective complexity is defined by the ability to fully comprehend the system. Simplifying complexity, in a subjective sense, is thus gaining a deeper understanding of the system. As Apple's Jonathon Ive has stated," It's not just minimalism or the absence of clutter. It involves digging through the depth of complexity. To be truly simple, you have to go really deep". Simplicity is not the absence of complexity but a deeper understanding of complexity. Subjective complexity, based on this human comprehension, cannot then be discerned from the sociological concept of ignorance. The inability to comprehend a system can be either a lack of knowledge, an inability to understand the intricacies of a system, or both. Reduction in this sense is based purely on a cognitive ability to understand the system and no system then may be truly complex. From this view, education and experience seem to be the keys to reduction or eliminating complexity. Objective complexity, is the measure of the systems functions and interrelationships which exist independent of human comprehension. Jonathon Ive's statement does not say that complexity is removed, only that the complexity is understood. From this standpoint, reduction of complexity can be approached in finding the optimal or 'best balance' of the system functions and interrelationships. This is achievable following von Bertalanffy's approach of describing systems as a set of equations representing both the system functions and the system interrelationships. Reduction is found based on an objective function defining the system output given variations in the system inputs and the system operating environment. By minimizing the objective function with respect to these inputs and environments, a reduced system can be found. Thus, a reduction of the system complexity is feasible.

Watson, Michael D.↗

MoSST DAS: The First Working Geomagnetic Data Assimilation System

The Earth possesses an internal magnetic field (geomagnetic field) generated by convection in the outer core (geodynamo). Previous efforts have been focused along two distinct paths: (1) numerical geodynamo modeling to understand the origin of the geomagnetic field, and the mechanisms of geomagnetic secular variations (SV); and (2) geomagnetic field modeling to map the spatial/temporal variations of the field from geomagnetic data, and to derive core properties, e.g. inversion of core flow near the core-mantle boundary (CMB). Geomagnetic data assimilation is a new approach emerged over the past 5 years: surface observations are assimilated with geodynamo models for better understanding of the core dynamical state, and accurately prediction of SV. In collaboration with several geomagnetic research groups, we have developed the first working geomagnetic data assimilation system, Modular, Scalable, Self-consistent, and Three-dimensional (MoSST) DAS, that includes the MoSST numerical dynamo model; 7000 years of geomagnetic field maps from several field models utilizing satellite and ground observatory data, historical magnetic records and archeo/paleo magnetic data; and an ensemble based optimal interpolation (01) assimilation algorithm. With this system, we have demonstrated clearly that the assimilated core dynamical state is substantially different from those of pure geodynamo simulations. Ensemble assimilation runs also show the convergence of the assimilated solutions inside the core, suggesting that the simulation state is pulled closer to the truth via data assimilation. The forecasts from this system are also very accurate: the 5-year forecast of the geomagnetic field agrees very well with the observations; and the 5-year secular variation forecast is more accurate than the IGRF SV forecast models in the past. Using geomagnetic records up to 2009, we have made an SV forecast for the period from 2010-2015, and is a candidate SV model for IGRF-11.

Kuang, Weijia↗

A re-entrant groove hydrogen heat pipe

This paper extends the development of reentrant groove technology to hydrogen heat pipes. Parametric analyses are presented which optimize the theoretical design while considering the limitations of state-of-the-art extrusion technology. Acceptable production-type runs of extruded lengths (over 300 m) could only be achieved at the expense of a wider nominal groove opening than specified (0.33 mm vs. 0.20 mm). However, dimensional variations of other critical dimensions were within 0.05 mm, which exceeded expectations. The 6063-T6 aluminum extrusion is 14.6 mm OD with a wall thickness of 1.66 mm and contains 20 axial grooves which surround a central 9.3-mm-diam vapor core. Each axial groove is 0.775-mm-diam with a 0.33 mm opening. An excess vapor reservoir is provided at the evaporator to minimize the pressure containment hazard during ambient storage. Details of the instrumentation and helium-cooled test installation are also presented.

Alario, J.↗

Orbit Transfer Vehicle Engine Study. Phase A, extension 1: Advanced expander cycle engine optimization

The performance optimization of expander cycle engines at vacuum thrust levels of 10K, 15K, and 20K lb is discussed. The optimization is conducted for a maximum engine length with an extendible nozzle in the retracted position of 60 inches and an engine mixture ratio of 6.0:1. The thrust chamber geometry and cycle analyses are documented. In addition, the sensitivity of a recommended baseline expander cycle to component performance variations is determined and chilldown/start propellant consumptions are estimated.

Mellish, J. A.↗

A variable structure approach to robust control of VTOL aircraft

This paper examines the application of variable structure control theory to the design of a flight control system for the AV-8A Harrier in a hover mode. The objective in variable structure design is to confine the motion to a subspace of the total state space. The motion in this subspace is insensitive to system parameter variations and external disturbances that lie in the range space of the control. A switching type of control law results from the design procedure. The control system was designed to track a vector velocity command defined in the body frame. For comparison purposes, a proportional controller was designed using optimal linear regulator theory. Both control designs were first evaluated for transient response performance using a linearized model, then a nonlinear simulation study of a hovering approach to landing was conducted. Wind turbulence was modeled using a 1052 destroyer class air wake model.

Calise, A. J.↗