Search NASA⌕ Search

SEARCH · Search NASA

Results for “velocity data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Energy transfer from a pulsed thermal source to He II below 0.3 K.

Results of measurements of the angular distribution of the energy flux radiated from a pulsed heater immersed in He II at low temperatures (around 230 mK). It is shown that the energy transfer from a pulsed carbon heater at a relatively high temperature to ambient liquid helium maintained at low temperature cannot be adequately described by the phonon-coupling models. The experimental data on the velocity and angular distribution of the energy flux radiated from the plane of the heater indicate that the energy from the heater is transferred to a layer of hot helium adjacent to the surface of the heater and that this layer acts as the effective source of excitations radiated into the ambient liquid helium. The extent and shape of this source depend on the total energy flux produced by the heater.

Pfeifer, C. D.↗

Noise of model target type thrust reversers for engine-over-the-wing applications

The results of experiments on the noise generated by V-gutter and semicylindrical target reversers with circular and short-aspect-ratio slot nozzles having diameters of about 5 cm are presented. The experiments were conducted with cold-flow jets at velocities from 190-290 m/sec. The reversers at subsonic jet velocities had a more uniform noise distribution and higher frequency than the nozzles alone. The reverser shape was shown to be more important than the nozzle shape in determining the noise characteristics. The maximum sideline pressure level varied with the sixth power of the jet velocity, and the data were correlated for angles along the sideline. An estimate of the noise level along the 152 m sideline for an engine-over-the-wing powered-lift airplane was made.

Stone, J. R.↗

Three-dimensional structural analysis using interactive graphics

The application of computer interactive graphics to three-dimensional structural analysis was described, with emphasis on the following aspects: (1) structural analysis, and (2) generation and checking of input data and examination of the large volume of output data (stresses, displacements, velocities, accelerations). Handling of three-dimensional input processing with a special MESH3D computer program was explained. Similarly, a special code PLTZ may be used to perform all the needed tasks for output processing from a finite element code. Examples were illustrated.

Biffle, J.↗

Development of an optimal automatic control law and filter algorithm for steep glideslope capture and glideslope tracking

A digital automatic control law to capture a steep glideslope and track the glideslope to a specified altitude is developed for the longitudinal/vertical dynamics of a CTOL aircraft using modern estimation and control techniques. The control law uses a constant gain Kalman filter to process guidance information from the microwave landing system, and acceleration from body mounted accelerometer data. The filter outputs navigation data and wind velocity estimates which are used in controlling the aircraft. Results from a digital simulation of the aircraft dynamics and the control law are presented for various wind conditions.

Halyo, N.↗

Vestibular functions and sleep in space experiments

Physical indices of sleep were continuously monitored in an owl monkey living in a chamber continuously rotating at a constant angular velocity. The electrophysiological data obtained from chronically implanted electrodes was analyzed to determine the chronic effects of vestibular stimulation on sleep and wakefulness cycles. The interaction of linear and angular acceleration on the vestibulo-ocular reflex was investigated in three rhesus monkeys at various angular accelerations.

Perachio, A. A.↗

Dynamic hyperfiltration membranes for high-temperature spacecraft wash water recycle

The effect of operating parameters on the performance of the hyperfiltration membrane when operating on washwater was examined. The parameters were pressure, temperature, velocity, and concentration. Data taken included rejections of organic materials, ammonia, urea, and an assortment of ions. The membrane used was a dual layer, polyacrylic acid over zirconium oxide, deposited in situ on a porcelain ceramic substrate.

Gaddis, J. L.↗

An improved prediction method for the noise generated in flight by circular jets

A semi-empirical model for predicting the noise generated by jets exhausting from circular nozzles is presented and compared with small-scale static and simulated-flight data. The present method is an updated version of that part of the original NASA aircraft noise prediction program relating to circular jet noise. The earlier method agreed reasonably well with experimental static and flight data for jet velocities up to approximately 520 m/sec. The poorer agreement at higher jet velocities appeared to be due primarily to the manner in which supersonic convection effects were formulated. The purely empirical supersonic convection formulation is replaced in the present method by one based on theoretical considerations. Other improvements of an empirical nature were included based on model-jet/free-jet simulated-flight tests. The effects of nozzle size, jet velocity, jet temperature, and flight are included.

Stone, J. R.↗

Flow process in combustors

Fluid mechanical effects on combustion processes in steady flow combustors, especially gas turbine combustors were investigated. Flow features of most interest were vorticity, especially swirl, and turbulence. Theoretical analyses, numerical calculations, and experiments were performed. The theoretical and numerical work focused on noncombusting flows, while the experimental work consisted of both reacting and nonreacting flow studies. An experimental data set, e.g., velocity, temperature and composition, was developed for a swirl flow combustor for use by combustion modelers for development and validation work.

Gouldin, F. C.↗

A color video display technique for flow field surveys

Color video display techniques for flow field surveys are presented. The following techniques were examined: traverse device, used for flow field surveys above and behind finite wing models; flow chart of data reduction for color video display technique; location of spanwise survey stations above and behind wing; hot wire data at first three survey stations on fully stalled wing; hot wire data at last three stations behind fully stalled wing; hot wire and pitch probe data; magnitude of velocity, yaw angle, pitch angle, and cross flow direction from 5 tube survey at X/C = 2.70 behind fully stalled wing.

Winkelmann, A. E.↗

Shuttle orbiter stellar-inertial reference system

The Space Shuttle stellar-inertial reference system is a velocity and attitude data source during flight operations. An overview of the reference system is presented as well as specifics discussing design concepts, functional operation, and performance capabilities. Techniques for star sighting and inertial measurement unit alignment and calibration are described, and alignment accuracy, star tracker capability, and gyro and accelerometer accuracy are discussed, with emphasis on flight test results. Test programs have confirmed that the system meets performance requirements such as being accurate to within 0.26 degree at the 400,000 foot altitude entry interface in order to execute an accurate touchdown, as well as demonstrating reusability, payload capability, and operational flexibility. Growth possibilities, such as the implementation of rendezvous target tracking, are discussed.

Smith, F. E.↗

Theoretical studies of X-ray emission from supernova remnants and other non-equilibrium astrophysical plasmas

To improve the accuracy of thermal X-ray emission spectrum predictions, new computations of electron excitation rates, dielectric recombination rates, and updated codes were applied to existing data on supernova remnants and O star winds. Because of its general predominance along with low ionization and recombination rates, Fe(XVII) was analyzed with the inclusion of resonances to the excitation rate data. Corrections to the existing dielectric recombination rates based on detailed Fe (XVII) calculations and the more approximate Quantum Defect Method were accomplished. by using Distorted Wave ionization rates and reliable excitation rates, models for X-ray, ultraviolet, and optical emission line intensities of non-radiative shock wave can be constructed that supply data on shock velocity, preshock ionization states, and elemental abundances. The radiative driving force that drives the shock wave is calculated through line opacities of the shocked gas. X-ray emission spectra are also calculated for O star winds.

Dupree, A. K.↗

Incident beam polarization for laser Doppler velocimetry employing a sapphire cylindrical window

For laser Doppler velocimetry studies employing sapphire windows as optical access ports, the birefringency of sapphire produces an extra beam intersection volume which serves to effectively smear the acquired velocity flow field data. It is shown that for a cylindrical window geometry, the extra beam intersection volume may be eliminated with minimal decrease in the fringe visibility of the remaining intersection volume by suitably orienting the polarizations of the initial laser beams. For horizontally incident beams, these polarizations were measured at three intersection locations within the cylinder. It was found that the measured polarization angles agreed with the theoretical predictions.

Lock, J. A.↗

Spectroscopic orbits for 16 more binaries in the Hyades field

A photoelectric survey of the radial velocities of Hyades candidates has provided data for 16 spectroscopic binary orbits, in addition to the 11 known binaries in the Hyades field. The majority of photoelectric observations in the survey were carried out at the Cambridge and Palomar Observatories using different data reduction techniques for determining radial velocities. It is found that two of the objects, vB 164 and J336, are definitely not members of the Hyades cluster; two other objects, HD 16909 and J301, appear to be located far from the center of the cluster, but still deserve classification as Hyades members. The gamma-velocity of HD 16909 differed slightly from the value expected for a member of the Hyades cluster. An additional twelve systems were definitely identified as members of the Hyades. The radial velocity values for all the candidate stars are given in a series of tables.

Griffin, R. F.↗

Impact and explosion crater ejecta, fragment size, and velocity

The present investigation had the objective to develop models for the distribution of fragments which are ejected at a given velocity for both impact and explosion cratering. It is pointed out that the results have application to the physics of planetary accretion and the origin of meteorites. The impact ejection of fine dust into the earth's atmosphere has been proposed as a mechanism for extinctions which occurred at the end of the Cretaceous. A technique is developed for determining the distribution of fragments which are ejected at a given velocity. The experimental data base for the distribution fragments in the ejecta blankets of impact, explosion, and nuclear craters, are discussed. Attention is also given to impact flow field calculations, fragmentation theory, and the applications of the derived relations.

Okeefe, J. D.↗

Incident beam polarization for laser Doppler velocimetry employing a sapphire cylindrical window

For laser Doppler velocimetry studies employing sapphire windows as optical access ports, the birefringency of sapphire produces an extra beam intersection volume which serves to effectively smear the acquired velocity flow field data. It is shown that for a cylindrical window geometry, the extra beam intersection volume may be eliminated with minimal decrease in the fringe visibility of the remaining intersection volume by suitably orienting the polarizations of the initial laser beams. For horizontally incident beams, these polarizations were measured at three intersection locations within the cylinder. It was found that the measured polarization angles agreed with the theoretical predictions.

Lock, J. A.↗

The infall velocity toward Virgo, the Hubble constant, and a search for motion toward the microwave background

The perturbation of the local velocity field due to the overdensity of the Virgo complex (VC) is investigated theoretically, using an idealized spherically symmetric Virgocentric flow model and testing for a correlation between cos theta (where theta is the angle from the VC direction to eight groups and clusters with velocity 800-2500 km/s) and the relevant velocity residuals. The data and results are presented in extensive tables, graphs, and a map in extragalactic coordinates. The infall of the Local Group (LG) toward the VC is estimated as 200 + or - 50 km/s, corresponding to a mean mass/light ratio M/L(B) = about 70 for a sphere centered at the VC core and extending to the LG. The rate of free expansion within the VC is estimated as 52 + or 2 km/s Mpc for a VC distance of 21.6 Mpc. It is pointed out that the LG infall toward the VC cannot account for observations of an apparent 630-km/s motion of the LG toward the microwave background.

Tammann, G. A.↗

Digital filtering and acceleration pulse interpretation

It was concluded that the post processing digital filter is quite effective for removing unwanted high frequency and noise without distorting the signal. In addition, digital filtering is effective for smoothing low-level low resolution digital data where the digital stairstep phenomena are pronounced. Integrating the acceleration data to obtain velocity traces is quite useful. The velocity change provides a check on the validity of the acceleration trace. (Zero offsets in acceleration must be removed before integrating.) Average accelerations can be obtained from the velocity trace by dividing the change in velocity for an acceleration pulse by the pulse duration. One can obtain the peak of an equivalent triangular pulse by doubling the average acceleration.

Pasanella, E. L.↗

NASA plans for spaceborne lidar - The Earth Observing System

The use of laser techniques to observe the earth's atmosphere and surface from space is examined. An Earth Observing System is proposed as the platform for performing lidar observations. The objectives and capabilities of the Lidar Atmospheric Sounder and Altimeter (LASA) are described. The measurement techniques for collecting temperature, pressure, and water vapor profiles, the vertical distribution of ozone in the stratosphere and troposphere, and atmospheric particulates profiles are discussed. The LASA requirements for altimetry and retroranging are considered. The Doppler Lidar Wind Sensor which provides data on wind velocity is analyzed. These laser systems with increased spatial resolution and accuracy form an efficient information system for studying earth science developments.

Curran, R. J.↗