Search NASA⌕ Search

SEARCH · Search NASA

Results for “Additive decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Hydrogen activated axial inter-conversion in SiC nanowires

A facile low pressure annealing route using NH{sub 3} as a hydrogen source for the structural and chemical modification of SiC nanowires (SiCNWs) is presented. The developed route transforms SiCNWs into tubular SiC nanostructures while coaxial SiO{sub 2}/SiCNWs reverse their sheath/core structure. Our findings suggest a decomposition process induced via the preferential substitution of silicon by hydrogen and via the difference in diffusion rates of available atomic species, which leads to axial structural rearrangement. In addition to these effects, the procedure improves the crystallinity of the samples. The process could be exploited as a viable route to manipulate a variety of nanostructures and films for doping and etching and structural manipulation. - Graphical abstract: SiC and SiO{sub 2}/SiCNWs are shown to be structurally modified through a hydrogen activated replacement route which can even lead to the axial inter-conversion of species. The process could be exploited as a viable route to manipulate a variety of nanostructures and films for doping and etching and structural manipulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Ionizing Radiation on the Thermodynamic Stability of Boehmite and Gibbsite

Here, in this study, we examined the effect of gamma radiation on the stabilities of aluminum hydroxide (gibbsite) and aluminum oxyhydroxide (boehmite) nanoparticles in relation to their thermal decomposition. X-ray diffraction (XRD) patterns and scanning electron microscopy (SEM) images revealed no significant differences in mineral components or morphology before and after radiation. However, thermogravimetric and differential scanning calorimetry (TGA/DSC) analyses showed that both boehmite and gibbsite nanoparticles experienced decreased mass loss following irradiation. Raman and attenuated total reflection-Fourier transfer infrared (ATR-FTIR) spectra indicated that a fraction of the hydroxyl content in both cases was selectively cleaved by radiation, primarily at the particle surfaces. Quantitative analyses of thermal mass loss behavior demonstrated that irradiated boehmite and gibbsite nanoparticles had higher activation energies than their pristine counterparts, with the extent of the increase dependent on the total dose. Taken together, these findings suggest that exposure to a sufficient dose of ionizing radiation alters these materials such that they are less prone to decomposition by dehydration. This increased stability may be due to the decreased hydrous nature of the samples after radiation exposure, which was supported by further high temperature drop calorimetry. Additionally, a radiation-induced amorphous phase on the nanoparticle surfaces appears to have a permanent and positive influence on their thermodynamic stabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acoustic emission signal processing technique to characterize reactor in-pile phenomena

Existing and developing advanced sensor technologies and instrumentation will allow non-intrusive in-pile measurement of temperature, extension, and fission gases when coupled with advanced signal processing algorithms. The transmitted measured sensor signals from inside to the outside of containment structure are corrupted by noise and are attenuated, thereby reducing the signal strength and the signal-to-noise ratio. Identification and extraction of actual signal (representative of an in-pile phenomenon) is a challenging and complicated process. In the paper, empirical mode decomposition technique is utilized to reconstruct actual sensor signal by partially combining intrinsic mode functions. Reconstructed signal will correspond to phenomena and/or failure modes occurring inside the reactor. In addition, it allows accurate non-intrusive monitoring and trending of in-pile phenomena.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Photochemistry of NH3, CH4 and PH3 - Possible applications to the Jovian planets

It is found that the photolysis of NH4 at 185 nm in the presence of a two-fold excess of CH4 results in the loss of about 0.25 mole of CH4 per mole of NH3 decomposed. The loss is shown to arise from the abstraction of hydrogen atoms from CH4 by photolytically generated hot hydrogen atoms. It is concluded that NH3 photolysis in the H2-abundant atmosphere of Jupiter is not responsible for the presence of the carbon compounds observed there, such as ethane, acetylene, and hydrogen cyanide, but may have had a role in the early atmosphere of Titan. Also, it is found that the photolysis of PH3 with a 206 nm light source gives P2H4, which in turn is converted to a red-brown solid. The course of the photolysis is not changed appreciably when the temperature is lowered to 157 K except that the concentration of P2H4 increases, while the presence of H2 has no effect on the P2H4 yield. Photolysis of 9:1 NH3:PH3 is found to give a rate of decomposition of PH3 that is comparable with that observed by the direct photolysis of PH3 and comparable amounts of the red-brown solid and P2H4 are observed. In addition, the implications of these results for the structures of the compounds responsible for the wide array of colors observed in the atmosphere of Jupiter are examined.

Ferris, J. P.↗

Equation of State and Shock-Driven Decomposition of 'Soft' Materials

Equation of state (EOS) efforts at National Nuclear Security Administration (NNSA) national laboratories tend to focus heavily on metals, and rightly so given their obvious primacy in nuclear weapons. Our focus here, however, is on the EOS of 'soft' matter such as polymers and their derived foams, which present a number of challenges distinct from those of other material classes. This brief description will cover only one aspect of polymer EOS modeling: treatment of shock-driven decomposition. Here, these interesting (and sometimes neglected) materials exhibit a number of other challenging features— glass transitions, complex thermal behavior, response that is both viscous and elastic—each warranting additional discussions of their own.

36 MATERIALS SCIENCE↗

Improving the way land use change is handled in economic models

Sound economic modelling of land use in global economic models is critical for evaluating agricultural, biofuel, and climate policies. Current approaches do not preserve physical land area, do not account for the fact that land is of different qualities, or do not explicitly include the cost of converting land from one use to another. This study proposes a land use modelling framework building on the additive form of the constant elasticity of transformation (ACET) approach. We demonstrated that the framework could (1) directly provide traceable physical land use results, (2) flexibly handle land productivity differences based on biophysical information, (3) explicitly introduce land conversion cost, and (4) provide welfare decomposition in light of land heterogeneity and conversion cost. An experiment of mandating a 10 percent increase in grain consumption in the US food sector showed that ignoring land heterogeneity and conversion cost would underestimate the welfare loss by 28 percent.

54 ENVIRONMENTAL SCIENCES↗

Upcycling Low Linear Density Polyethylene Waste into Turbostratic Graphene for High Mass Loading Supercapacitors

In this work, LLDPE was upcycled into a high quality turbostratic graphene using a pre-treatment step to oxidatively crosslink the polymer with the assistance of solid additives (KCl and K2CO3) that improve crosslinking by increasing the effective surface area of the polymer melt during processing. After this pretreatment step, the crosslinked polymer could then be carbonized and catalytically graphenized between 400-950 °C without complete decomposition of the material. The LLDPE derived graphene (LLDPE-G) obtained from this process has a Brunauer–Emmett–Teller (BET) specific surface area, up to 1800 m2g-1 and average Raman ID/IG and I2D/IG ratios of 0.85 and 0.57, respectively, indicating high quality graphene. When used as an electrode material in symmetric supercapacitors, LLDPE-G possesses an outstanding specific capacitance up to 175 Fg-1 at a mass loading of 20 mgcm-2, which is two times the commercial requirement, yielding an excellent areal capacitance of 3.5 Fcm-2. Moreover, LLDPE-G exhibits exceptional cycling stability with a capacitance retention of 95.8% after 100,000 cycles at a current density of 4.0 Ag-1. Additionally, the KCl and K2CO3 were recycled and reused over 3 complete cycles to make new LLDPE-G with the material quality and electrocapacitive performance retained and verified after each cycle. Our approach creates new opportunities for upcycling not only waste LLDPE but also other varieties of PE to high value graphene materials.

Gao, Yuan [NETL Site Support Contractor, National ↗

Statistical CT noise reduction with multiscale decomposition and penalized weighted least squares in the projection domain

Purposes: The suppression of noise in x-ray computed tomography (CT) imaging is of clinical relevance for diagnostic image quality and the potential for radiation dose saving. Toward this purpose, statistical noise reduction methods in either the image or projection domain have been proposed, which employ a multiscale decomposition to enhance the performance of noise suppression while maintaining image sharpness. Recognizing the advantages of noise suppression in the projection domain, the authors propose a projection domain multiscale penalized weighted least squares (PWLS) method, in which the angular sampling rate is explicitly taken into consideration to account for the possible variation of interview sampling rate in advanced clinical or preclinical applications. Methods: The projection domain multiscale PWLS method is derived by converting an isotropic diffusion partial differential equation in the image domain into the projection domain, wherein a multiscale decomposition is carried out. With adoption of the Markov random field or soft thresholding objective function, the projection domain multiscale PWLS method deals with noise at each scale. To compensate for the degradation in image sharpness caused by the projection domain multiscale PWLS method, an edge enhancement is carried out following the noise reduction. The performance of the proposed method is experimentally evaluated and verified using the projection data simulated by computer and acquired by a CT scanner. Results: The preliminary results show that the proposed projection domain multiscale PWLS method outperforms the projection domain single-scale PWLS method and the image domain multiscale anisotropic diffusion method in noise reduction. In addition, the proposed method can preserve image sharpness very well while the occurrence of 'salt-and-pepper' noise and mosaic artifacts can be avoided. Conclusions: Since the interview sampling rate is taken into account in the projection domain multiscale decomposition, the proposed method is anticipated to be useful in advanced clinical and preclinical applications where the interview sampling rate varies.

60 APPLIED LIFE SCIENCES↗

Chemical Mapping of the Milky Way with The Canada–France Imaging Survey: A Non-parametric Metallicity–Distance Decomposition of the Galaxy

We present the chemical distribution of the Milky Way, based on 2900 deg{sup 2} of u-band photometry taken as part of the Canada–France Imaging Survey. When complete, this survey will cover 10,000 deg{sup 2} of the northern sky. By combing the CFHT u-band photometry together with Sloan Digital Sky Survey and Pan-STARRS g,r, and i, we demonstrate that we are able to reliably measure the metallicities of individual stars to ∼0.2 dex, and hence additionally obtain good photometric distance estimates. This survey thus permits the measurement of metallicities and distances of the dominant main-sequence (MS) population out to approximately 30 kpc, and provides a much higher number of stars at large extraplanar distances than have been available from previous surveys. We develop a non-parametric distance–metallicity decomposition algorithm and apply it to the sky at 30{sup ∘}<|b|<70{sup ∘} and to the North Galactic Cap. We find that the metallicity–distance distribution is well-represented by three populations whose metallicity distributions do not vary significantly with vertical height above the disk. As traced in MS stars, the stellar halo component shows a vertical density profile that is close to exponential, with a scale height of around 3 kpc. This may indicate that the inner halo was formed partly from disk stars ejected in an ancient minor merger.

79 ASTRONOMY AND ASTROPHYSICS↗

Roaming radical kinetics in the decomposition of acetaldehyde.

A novel theoretical framework for predicting the branching between roaming and bond fission channels in molecular dissociations is described and applied to the decomposition of acetaldehyde. This reduced dimensional trajectory (RDT) approach, which is motivated by the long-range nature of the roaming, bond fission, and abstraction dynamical bottlenecks, involves the propagation of rigid-body trajectories on an analytic potential energy surface. The analytic potential is obtained from fits to large-scale multireference ab initio electronic structure calculations. The final potential includes one-dimensional corrections from higher-level electronic structure calculations and for the effect of conserved mode variations along both the addition and abstraction paths. The corrections along the abstraction path play a significant role in the predicted branching. Master equation simulations are used to transform the microcanonical branching ratios obtained from the RDT simulations to the temperature- and pressure-dependent branching ratios observed in thermal decomposition experiments. For completeness, a transition-state theory treatment of the contributions of the tight transition states for the molecular channels is included in the theoretical analyses. The theoretically predicted branching between molecules and radicals in the thermal decomposition of acetaldehyde is in reasonable agreement with the corresponding shock tube measurement described in the companion paper. The prediction for the ratio of the tight to roaming contributions to the molecular channel also agrees well with results extracted from recent experimental and experimental/theoretical photodissociation studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

What Makes Fluoroethylene Carbonate Different?

Rechargeable lithium-ion batteries containing silicon-based negative electrodes have the potential to revolutionize electrical energy storage, but carbonate solvents (such as ethylene carbonate) that are commonly used in graphite Li-ion batteries, yield unsatisfactory performance when used with such Li alloying electrodes. It has been found by trial-and-error that additions of the closely related carbonate additive, fluoroethylene carbonate (FEC) to conventional electrolytes, yields a robust solid electrolyte interphase (SEI) on the LixSiy alloy surface. Several mechanisms for this protective action have been considered in the literature and modeled theoretically; however, at present these mechanisms remain speculative. In this study, we use radiolysis, laser photoionization, electron paramagnetic resonance, and transient absorption spectroscopy to establish the redox chemistry of FEC. While the oxidation chemistry is similar to that of other carbonates, the reduction chemistry is strikingly different. Specifically, one-electron reduction of FEC causes the fission of two (instead of one) C-O bonds, resulting in concerted defluorination and decarboxylation. This reaction yields the vinoxyl radical that can abstract an H atom from FEC, initiating both the chain reaction causing FEC decomposition and radical polymerization involving the reaction products. The resulting polymer can further defluorinate yielding the interior radicals that migrate and recombine to produce a highly cross-linked network. We suggest that the outer SEI resulting from FEC addition has elastomeric properties, which account for its cohesion during expansion and contraction of silicon particles in the course of Li alloying/dealloying cycling.

electron paramagnetic resonance↗

Local SU(2) × U(1) quark flavor symmetry in the RS bulk

We propose a model of quark flavor based on an additional SU(2) × U(1) local symmetry in a warped extra dimensional bulk. In contrast to other works, we break the additional gauge symmetry in the bulk via two complex scalars which acquire bulk vevs, rather than relying on brane-localized symmetry breaking. A gauge-covariant Kaluza-Klein decomposition of a theory with a bulk spontaneously broken gauge symmetry is performed, and exact expressions for the bulk profiles of all physical particles in such systems are given. The SM quark masses and mixings are then recreated using gauge-covariant bulk quark mass terms and Yukawa-like couplings to the new bulk scalars. A numerical sampling of points in the model parameter space that recreate the quark masses and mixings is performed at a KK scale of M KK = 5 TeV. We then compute the ΔF = 2 4-quark operators arising from our new flavor gauge bosons and scalars, and those arising from Kaluza-Klein modes of SM gauge bosons. By decoupling one of our bulk scalar fields to all quark fields except the right-handed up-like sector, we find that it is possible to greatly suppress tree-level contributions to the highly constrained Kaon mixing parameters. Instead, the dominant constraints on the model emerge from neutral Bd and D meson mixing. These constraints are explored with our numerical sampling of the model parameter space, and the specific contribution of the new flavor gauge bosons and scalars is discussed. We find that for a significant range of realistic flavor gauge couplings, the new gauge bosons compete with the normally dominant gluon flavor-changing currents, but flavor-changing operators emerging from the bulk scalar fields are highly suppressed. Finally, we briefly comment on flavor constraints that are independent of the flavor gauge sector arising from the Z$\overline{b}$ L b L coupling and rare top decays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Photocatalytic treatment of pharmaceutical wastewater using new multiwall-carbon nanotubes/TiO{sub 2}/SiO{sub 2} nanocomposites

For the photocatalytic removal of bisphenol A (BPA) and carbamazepine (CBZ) from water solution a new multiwall-carbon nanotubes and TiO{sub 2}/SiO{sub 2} nanocomposites (MWCNT–TiO{sub 2}–SiO{sub 2}) were applied. Nanocomposites with the addition of 0.15–17.8 wt% MWCNT show high potential for the removal of both pollutants. The starting concentration of each contaminant was halved during 20 min of UVA irradiation. The decomposition process of CBZ over investigated nanocomposites proceeded differently than it was observed for the classical photocatalyst P25. The kinetics of the removal followed as a pseudo-first order regime with the k{sub 1} in range 0.0827–0.1751 min{sup −1} for BPA and 0.0131–0.0743 min{sup −1} for CBZ. Toxicity to Vibrio fischeri and Daphnia magna was significantly reduced indicating formation of non-toxic products of photooxidation of tested contaminants. - Highlights: • MWCNT enhanced TiO{sub 2} activity in UVA and the removal of BPA and CBZ. • At least 50% PPCPs removal during 30 min of photocatalytic treatment was observed. • MWCNT changed the mechanism of CBZ decomposition but not BPA. • Decomposition products of both BPA and CBZ possessed low toxicity. • Photocatalysis may be recommended for the initial treatment of pharmaceutical wastewater.

54 ENVIRONMENTAL SCIENCES↗

Progress toward Biomass and Coal-Derived Syngas Warm Cleanup: Proof-of-Concept Process Demonstration of Multicontaminant Removal for Biomass Application

Systems comprising of multiple sorbent and catalytic beds have been developed for the warm syngas cleanup of coal- and biomass-derived syngas. Tailored specifically for biomass application the process described here consists of six primary unit operations: 1) Na2CO3 bed for HCl removal, 2) two regenerable ZnO beds for bulk H2S removal, 3) ZnO bed for H2S polishing, 4) NiCu/SBA-16 sorbent for trace metal (e.g. AsH3) removal, 5) steam reforming catalyst bed for tars and light hydrocarbons reformation and NH3 decomposition, and a 6) Cu-based LT-WGS catalyst bed. Simulated biomass-derived syngas containing a multitude of inorganic contaminants (H2S, AsH3, HCl, and NH3) and hydrocarbon additives (methane, ethylene, benzene, and naphthalene) was used to demonstrate process effectiveness. The efficiency of the process was demonstrated for a period of 175 hours, during which no signs of deactivation were observed. Post-run analysis revealed small levels of sulfur slipped through the sorbent bed train to the two downstream catalytic beds. Future improvements could be made to the trace metal polishing sorbent to ensure complete inorganic contaminant removal (to low ppb level) prior to the catalytic steps. However, dual, regenerating ZnO beds were effective for continuous removal for the vast majority of the sulfur present in the feed gas. The process was effective for complete AsH3 and HCl removal. The steam reforming catalyst completely reformed all the hydrocarbons present in the feed (methane, ethylene, benzene, and naphthalene) to additional syngas. However, post-run evaluation, under kinetically-controlled conditions, indicates deactivation of the steam reforming catalyst. Spent material characterization suggests this is attributed, in part, to coke formation, likely due to the presence of benzene and/or naphthalene in the feed. Future adaptation of this technology may require dual, regenerable steam reformers. The process and materials described in this report hold promise for a warm cleanup of a variety of contaminant species within warm syngas.

Environmental Molecular Sciences Laboratory↗

Projected Changes to Extreme Precipitation Along North American West Coast From the CESM Large Ensemble

Precipitation events along the North American (NA) west coast are strongly modulated by atmospheric rivers, yet the mechanisms of their influences on the probability distributions of precipitation events are not well studied. Simulations from the Community Earth System Model (CESM) large ensemble under global warming are investigated using a moisture budget conditioned onto precipitation events for the recurrence intervals ranging from 0.1 to 50 years. In the midlatitudes, the increases in precipitation intensity and accumulation for all events over the NA west coast are predominantly controlled by moisture increases. In contrast, changes in the subtropical precipitation distributions in southwestern NA are associated with moisture increases and duration decreases for all events, with additional dynamical amplification for the heaviest precipitation events. These interpretations from the conditional moisture budget are more consistent with future projection of atmospheric rivers than the conventional mean and transient decomposition of the moisture budget.

54 ENVIRONMENTAL SCIENCES↗

Photoinduced electronic excitations drive polymerization of carbon monoxide: A first-principles study

Under pressure, carbon monoxide (CO) transforms into a polymer that can be recovered to ambient conditions. While this transformation can occur without additional stimuli, experimental observations have shown that laser irradiation can induce a similar transformation at reduced pressure. The resulting polymeric phase, which is metastable under ambient conditions, releases energy through decomposition into more stable configurations. Using time-dependent density functional theory and Born–Oppenheimer molecular dynamics simulations, we investigate the mechanism by which electronic excitation facilitates CO polymerization. Our calculations reveal that electronic excitation enhances carbon–carbon bonding, enabling polymerization at pressures significantly lower than those required by conventional compression methods. In conclusion, these findings suggest that a photo-assisted approach could be employed to synthesize novel, potentially energetic materials under less demanding pressure conditions.

Born-Oppenheimer molecular dynamics↗

Chiral-odd generalized parton distributions, transversity decomposition of angular momentum, and tensor charges of the nucleon

The forward limit of the chiral-odd generalized parton distributions (GPDs) and their lower moments are investigated within the framework of the chiral quark soliton model (CQSM), with particular emphasis on the transversity decomposition of nucleon angular momentum proposed by Burkardt. A strong correlation between quark spin and orbital angular momentum inside the nucleon is manifest in the derived second moment sum rule within the CQSM, thereby providing an additional support to the qualitative connection between chiral-odd GPDs and Boer-Mulders effects. We further confirm isoscalar dominance of the corresponding first moment sum rule, which indicates that the Boer-Mulders functions for the u and d quarks have roughly equal magnitude with the same sign. Also made are some comments on the recent empirical extraction of the tensor charges of the nucleon by Anselmino et al. We demonstrate that a comparison of their result with any theoretical predictions must be done with great care, in consideration of fairly strong scale dependence of tensor charges, especially at the lower renormalization scale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improving the Long-term Cycle Performance of xLi 2 MnO 3 ·(1-x)LiMeO 2 /Li 4 Ti 5 O 12 Cells via Prelithiation and Electrolyte Engineering

Toward the development of high energy density and long lifetime batteries for behind-the-meter storage (BTMS) applications, Li- and Mn-rich layered oxide cathode (xLi 2 MnO 3 ·(1-x)LiMeO 2 , Me = Ni, Mn, and etc., LMR-NM) and Li 4 Ti 5 O 12 (LTO) anode system was examined. To mitigate the major degradation mechanisms at each electrode (i.e., loss of Li inventory (LLI) at the anode and transition metal dissolution and oxygen release at the cathode), two approaches were taken—prelithiating the LTO electrode and varying the electrolyte solvent compositions. The effect of prelithiation and electrolyte engineering on the long-term cycle performance of LMR-NM/LTO cells were systematically evaluated via electrochemical analyses and post-mortem characterizations. By using a prelithiated LTO anode and supplying additional Li to the system, the capacity retention of LMR-NM/LTO system was improved. The degree of enhancement was dependent on the types of electrolytes used, as their decomposition products determined the level of LLI. With increased capacity retention, however, the cathode was utilized to a greater extent, resulting in more severe loss of the cathode active material. Thus, all degradation mechanisms should be considered comprehensively when designing high performance LMR-NM/LTO cells to account for their complex interplay.

25 ENERGY STORAGE↗