Search NASA⌕ Search

SEARCH · Search NASA

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Mass production of high-performance single atomic FeNC electrocatalysts via sequenced ultrasonic atomization and pyrolysis process

Mass production of highly efficient, durable, and inexpensive single atomic catalysts is currently the major challenge associated with the oxygen reduction reaction (ORR) for fuel cells. In this study, we develop a general strategy that uses a simple ultrasonic atomization coupling with pyrolysis and calcination process to synthesize single atomic FeNC catalysts (FeNC SACs) at large scale. The microstructure characterizations confirm that the active centers root in the single atomic Fe sites chelating to the four-fold pyridinic N atoms. The identified specific Fe active sites with the variable valence states facilitate the transfer of electrons, endowing the FeNC SACs with excellent electrochemical ORR activity. The FeNC SACs were used as cathode catalysts in a homemade Zn-air battery, giving an open-circuit voltage (OCV) of 1.43 V, which is substantially higher than that of commercial Pt/C catalysts. This study provides a simple approach to the synthesis of single atomic catalysts at large scale.

36 MATERIALS SCIENCE↗

Production of 75–150 µm and <75 µm of cerium dioxide microspheres in high yield and throughput using the internal gelation process

Hundreds of grams of calcined cerium dioxide (CeO 2 ) microspheres were produced in this paper using the internal gelation process with a focus on 75–150 µm and <75 µm diameter sizes. To achieve these small sizes, a modified internal gelation system was employed, which utilized a two-fluid nozzle, two static mixers for turbulent flow, and 2-ethyl-1-hexanol as the medium for gel formation at 333–338 K. This effort generated over 400 g of 75–150 µm and 300 g of <75 µm CeO 2 microspheres. The typical product yields for the 75–150 µm and <75 µm microspheres that were collected and processed were 72 and 99%, respectively, with a typical throughput of 66–73 g of CeO 2 microspheres per test, which could generate a maximum of 78.6 g of CeO 2 . The higher yield of very small cerium spheres led to challenges and modifications, which are discussed in detail. Finally, as expected, when the <75 µm microspheres were targeted, losses to the system increased significantly.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A study of Zn x Zr y O z mixed oxides for direct conversion of ethanol to isobutene

Zn x Zr y O z mixed oxides were studied for direct conversion of ethanol to isobutene. Reaction conditions (temperature, residence time, ethanol molar fraction, steam to carbon ratio), catalyst composition, and pretreatment conditions were investigated, aiming at high-yield production of isobutene under industrially relevant conditions. An isobutene yield of 79% was achieved with an ethanol molar fraction of 8.3% at 475 °C on fresh Zn 1 Zr 8 O 17 catalysts. Further durability and regeneration tests revealed that the catalyst exhibited very slow deactivation via coking formation with isobutene yield maintained above 75% for more than 10 h time-on-stream. More importantly, the catalysts activity in terms of isobutene yield can be readily recovered after in situ calcination in air at 550 °C for 2.5 h. XRD, TPO, IR analysis of adsorbed pyridine (IR-Py), and nitrogen sorption have been used to characterize the surface physical/chemical properties to correlate the structure and performance of the catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

n-Butane dehydrogenation over Pt/Mg(In)(Al)O

The thermal dehydrogenation of butane to butene and hydrogen was explored over Pt nanoparticles supported on calcined hydrotalcite containing indium, Mg(In)(Al)O. Previous work has shown that upon reduction in H 2 at temperatures above 673 K, bimetallic Pt-In particles of are formed, as evidenced by XANES and EXAFS. The performance of Pt/Mg(In)(Al)O for butane dehydrogenation was found to be highly dependent on the bulk In/Pt ratio. The optimal ratio was found to be between 0.33 and 0.88, yielding >95% selectivity to butenes. Hydrogen co-fed with butane was shown to suppress coke formation and catalyst deactivation, a ratio of H 2 /C 4 H 10 = 2.5 providing the best catalytic performance. Regeneration of catalysts after removal of accumulated carbon and reduction in H 2 restored the original catalyst activity and selectivity. Butane dehydrogenation above 803 K resulted in higher formation of butadiene, a known precursor to coke. No evidence for butane cracking was found to occur on Pt/Mg(In)(Al)O due to moderately basic nature of the support. This study shows that Pt/Mg(In)(Al)O exhibits superior performance for butane dehydrogenation compared to supported Pt catalysts promoted with Sn, Ge, Pb, and In prepared by successive incipient wetness impregnation of the Pt and promoter precursors.

Butane dehydrogenation↗

Morphology-dependent phase transformation of y-Al2O3

The phase transformations of platelet- and rod-shaped ?-Al2O3 were investigated and compared to that of a commercial sample by XRD, BET surface area measurements, Transmission Electron Microscopy (TEM), solid state 27Al-NMR and ethanol temperature programmed desorption (TPD) after sequential annealing in air up to 1100 oC. After annealing at 1100 oC, commercial ?-Al2O3 mostly transformed into a-Al2O3 with drastic surface area reduction (from 200 m2/g to 25 m2/g). Interestingly, platelet- and rod-shaped ?-Al2O3 which showed exactly the same XRD patterns transformed into different phases upon the high temperature calcinations. Platelet-shaped ?-Al2O3 transformed into ?-phase while the rod-shaped ?-Al2O3 transformed into the d-phase and not to the a-polymorph. Both platelet- and rod-shaped aluminas retained significantly higher surface area (~60 m2/g) than the commercial one after the same treatment at 1100 oC. These results suggest that the phase transformation in ?-Al2O3 is strongly affected by not only the crystal structure of the starting material, but its morphology as well. Ethanol TPD from platelet- and rod-shaped alumina after 1100 oC annealing, showed significantly different desorption profiles which suggest different surface characteristics even though they had almost the same surface areas. These different phase transformations were also supported by solid state 27Al-NMR. After 1100oC annealing commercial alumina showed the presence of mostly octahedral Al3+ ions, but the other two samples displayed even higher number of tetrahedral Al3+ ions than the initial ?-Al2O3. Morphological changes were also confirmed by TEM. All these results consistently suggest the morphology-dependent phase transformations of ?-Al2O3 and the improved thermal stability of platelet- and rod- shaped ?-Al2O3 in comparison to a commercial ?-Al2O3. J.Sz. acknowledges the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences & Biosciences for the support of this work.

Lee, Jaekyoung↗

Ethane and propane dehydrogenation over PtIr/Mg(Al)O

Increased demand for light alkenes has motivated research on the catalytic dehydrogenation of the light alkanes and on understanding the role of catalyst composition on the activity, selectivity, and stability of Pt-based catalysts used for this purpose. This study examines the structure and performance of Pt-Ir catalysts for ethane and propane dehydrogenation, and compares them with the performance of Pt and Pt-Sn catalysts. Nanoparticles of Pt, PtSn, and PtIr were prepared in a colloidal suspension and then dispersed onto calcined hydrotalcite (Mg(Al)O). After characterization to confirm formation of a bimetallic alloy, it was observed that at high conversions, Pt 3 Ir/Mg(Al)O exhibited lower initial activity than Pt 3 Sn/Mg(Al)O but greater stability to coke deposition. Intrinsic rate measurements at low feed residence time revealed the following trend in activity: Pt 3 Sn > Pt 3 Ir > Pt. DFT calculations carried out on tetrahedral clusters (Pt 4 , Pt 3 Ir, Pt 3 Sn) reveals that this trend in activity can be replicated and Ir is capable of alkane activation, a trait unique to this bimetallic system.

36 MATERIALS SCIENCE↗

Synthesis and stabilization of small Pt nanoparticles on TiO 2 partially masked by SiO 2

Controlling metal nanoparticle size and preserving metal dispersion at elevated temperature remain key challenges in designing new supported metal catalysts. Many methods have been proposed to stabilize metal nanoparticles for catalysis, but the use of specialized equipment or metal precursors can limit the application of these methods for scalable production. Here, we demonstrate a synthesis strategy to improve the dispersion and thermal stability of Pt nanoparticles on an oxide support. A thin SiO 2 coat (<2 nm) was deposited on TiO2 through repeated condensation cycles of tetraethyl orthosilicate (TEOS) with or without an organic template on the surface. H 2 PtCl 6 was deposited using wetness impregnation, and the samples were dried, calcined, and reduced. The as-synthesized Pt nanoparticles are 1–2 nm by TEM and maintain dispersion >45% by CO chemisorption even after prolonged heating at 500 °C, whereas Pt nanoparticles on unmodified TiO 2 are less dispersed (~33%) and their dispersion falls further upon prolonged heating. Ethylene hydrogenation demonstrates that the Pt nanoparticles on modified TiO 2 preserve the catalytic activities of Pt on unmodified TiO 2 . The use of wet chemistry-based oxide modification and wetness impregnation makes this strategy a scalable and generalizable synthesis method to prepare other supported metal nanoparticles for catalysis applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tungstenocene-grafted silica catalysts for the selective epoxidation of alkenes

In this study, tungstenocene(IV) dichloride was successfully deposited and grafted on the surface of a commercially-available non-ordered silica support via either a liquid-phase or a dry impregnation approach. After a high-temperature calcination step, two W(VI)-grafted silica catalysts, with a metal loading around 1.2–1.7 wt.%, were obtained. They were fully characterized by physisorption and spectroscopic techniques, which evidenced well-dispersed tungsten oxide polyoxo cluster sites, for the catalyst prepared via liquid-phase grafting, and evenly dispersed larger monoclinic tungsten(VI) oxide aggregates, for the catalyst prepared via dry impregnation, respectively. Both W/SiO 2 solids showed moderate to good conversion values in the epoxidation of (R)-(+)-limonene and methyl oleate (up to 68%), in the presence of aqueous hydrogen peroxide, with good selectivity to the desired epoxides (63% and 78%, respectively). Lastly, the heterogeneous character of the most interesting W/SiO 2 catalyst prepared via dry impregnation was confirmed by a hot centrifugation test and by an extended recovery and reuse of the solid in six catalytic runs.

36 MATERIALS SCIENCE↗

Mesoporous Co 3 O 4 catalysts for VOC elimination: Oxidation of 2-propanol

Mesoporous cobalt oxides were prepared by an inverse micelle method and calcined at different temperatures. These materials exhibited superior activity for oxidation of 2-propanol as the model substrate for VOC elimination. Highest active Co 3 O 4 -350 material showed a maximum turnover frequency of 25.8 h -1 at 160 °C at a weight hourly space velocity of 60 L g -1 h -1 . The apparent activation energies of mesoporous cobalt oxides ranged from 69.7 kJ/mol to 115.6 kJ/mol. In situ Diffuse Reflectance Infrared spectroscopy (DRIFTS) revealed that the reaction involves formation of carbonyl and carbonate species on the surface of the catalyst before complete oxidation to CO 2 and H 2 O. The activities of the materials were correlated to better low temperature reducibility, large pore volumes, higher Co 3+ / Co 2+ ratios, and higher number of surface-active oxygen species.

2-propanol↗

Elucidation of puzzling questions regarding the CrO x /Al 2 O 3 catalyst I. X-ray absorption spectroscopy aided identification of the nature of the chromium oxide species in the CrO x /Al 2 O 3 dehydrogenation catalyst system

The CATOFIN© process produces propylene from propane using a CrO x /Al 2 O 3 catalyst. Despite its use, there are still uncertainties surrounding the nature of Cr species formed during synthesis, regeneration, and aging. It has been observed that ppm levels of Cr 2 O 3 can be oxidized to Cr(VI) in air; however, when Cr 2 O 3 is in direct contact with Al 2 O 3 , Cr(VI) formation increased more than 100-fold. Here, to confirm physical contact between Cr 2 O 3 and Al 2 O 3 results in increased Cr(VI) formation, Cr 2 O 3 and Cr 2 O 3 /Al 2 O 3 samples were synthesized, calcined, and characterized. Catalytic activity measurements confirm propylene selectivity inversely tracks with Cr(VI). Wet chemical titration and X-ray absorption spectroscopy (XAS) quantified and determined the structure of the Cr(VI) species. FEFF X-ray absorption near edge structure simulations determined the potential sensitivity of the XAS to the presence of Al 3+ /Cr 3+ neighboring atoms. XAS correlated to FEFF simulations suggested that Al 3+ x Cr 3+ 2–x Cr 6+ 3 O 12 comprises a significant fraction of the Cr(VI) species formed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of residual chlorine on Ru/TiO 2 active sites during CO 2 methanation

Titania-supported ruthenium (Ru/TiO 2 ) is an established catalyst for the hydrogenation of carbon dioxide to methane (Sabatier reaction). Chlorine contamination, owed to the RuCl 3 precursor, is demonstrated to have a detrimental impact on methanation activity. After calcination and reduction the catalyst contains residual chlorine, shown by XPS. An aqueous ammonia wash removes Cl without leaching Ru. The washed catalysts exhibit improvements in CH 4 site-time yields. Low Ru loading catalysts encounter the greatest activity enhancements after washing (~4.5-fold). DFT calculations indicate that chlorine and CO 2 directly compete for adsorption on Ru step sites, with Cl impeding the adsorption of CO 2 at under-coordinated sites and at higher Cl coverages. H 2 -chemisorption/TPR show that Cl removal lowers the onset of low temperature H 2 dissociation on Ru. Finally, DRIFTS provide evidence that the removal of Cl facilitates low temperature dissociative binding of CO 2 , indicated by the formation of surface bound linear CO species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature route to metal titanate perovskite nanoparticles for photocatalytic applications

MTiO 3 (M = Ca, Sr, Ba) nanoparticles were synthesized by a one-step room-temperature ultrasound synthesis in ionic liquid. The samples we gathered are characterized by X-ray diffraction, scanning electron microscopy, nitrogen adsorption, UV–vis diffuse reflectance, Raman and IR spectroscopy and their capability in photocatalytic hydrogen evolution and methylene blue degradation was tested. Powder X-ray diffraction and Raman spectroscopic investigations revealed the products to crystallize in the cubic perovskite structure. SEM observations showed that the obtained CaTiO 3 consists of nanospheres, BaTiO 3 of raspberry-like shaped particles of 20 nm in diameter. SrTiO 3 particles have cubic-like morphology with an edge length varying from 100 to 300 nm. SrTiO 3 exhibited the highest catalytic activity for photocatalytic H 2 evolution using only 0.025 wt.% Rh as co-catalyst and for the degradation of methylene blue under UV irradiation. The influence of parameters such as synthesis method, calcination temperature, and doping with nitrogen on the morphology, crystallinity, chemical composition, and photocatalytic acivity of SrTiO 3 was studied. Heating the as-prepared SrTiO 3 to 700 °C for extended time leads to a decrease in surface area and catalytic activity. Ionothermal prepared SrTiO 3 exhibits a higher activity than sonochemically prepared one without co-catalyst due to a synergistic effect of anatase which is present in small amount as a by-phase. Furthermore, after photodeposition of Rh, however, the activity is lower than that of the sonochemically prepared SrTiO 3 . Nitrogen-doped SrTiO 3 showed photocatalytic acivity under visible light irradiation.

36 MATERIALS SCIENCE↗

Gas-phase dehydration of tetrahydrofurfuryl alcohol to dihydropyran over γ-Al 2 O 3

Gas-phase dehydration of tetrahydrofurfuryl alcohol (THFA) to 3,4-2H-dihydropyran (DHP) was investigated over solid acid catalysts. A γ-Al 2 O 3 catalyst resulted in 90% DHP yield from THFA. The γ-Al 2 O 3 deactivated due to solid coke formation but was nearly fully re-generable upon a high temperature calcination step (only 2.5% activity loss after 3 rd regeneration). The high catalytic activity and selectivity of γ-Al 2 O 3 was correlated to its high Lewis to Brønsted acid site ratio, as confirmed by ammonia temperature-programmed desorption (NH 3 -TPD) and isopropylamine temperature-programmed desorption (IPA-TPD). According to isotopic-labelling studies, a reaction mechanism was proposed in which THFA initially dehydrates into a carbenium intermediate prior to Wagner-Meerwien rearrangement into DHP. A kinetic model of THFA dehydration over γ-Al 2 O 3 was developed according to kinetic experimental data. The best-fit model implied the rate-determining step was the surface reaction of adsorbed THFA dissociating into adsorbed DHP and water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new trick for an old support: Stabilizing gold single atoms on LaFeO 3 perovskite

Single-atom catalysts (SACs) have shown great potential for achieving superior catalytic activity due to maximizing metal efficiency. The key obstacle in developing SACs lies in the availability of supports that can stabilize SACs. Here we report the first successful development of single gold (Au) atom catalysts supported on high-surface-area hierarchical perovskite oxides. The resulting Au single-atoms are extremely stable at calcination temperatures up to 700 °C in air and under reaction conditions. A high catalytic activity for CO oxidation and distinct self-activating property were also achieved. Furthermore, evidenced by theoretical calculations and experimental studies including X-ray absorption fine structures and in situ Fourier-transform infrared spectra, the surface Au active sites are confirmed to be predominately positively charged. This study provides a generalizable approach to fabricating highly stable Au single-atom catalysts with tunable catalytic performance, and we anticipate that this discovery will facilitate new possibilities for the development of single atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photo-generated reactive oxygen species assisted tandem amine homocoupling and amine-alcohol cross-coupling reaction on mesoporous spinel cobalt oxide

Mesoporous spinel cobalt oxide (Co 3 O 4 ) with fine-tuned pore size distributions (9.6–17.6 nm) and different surface areas (33–85 m 2 /g) were synthesized using a series of nonionic surfactants. A direct influence of the chemical composition of the surfactants and calcination temperature on crystallite size, morphology, pore size/volume, surface area, valance band edge, and Co 2+ /Co 3+ ratio was recognized. Correlation between the aforementioned factors, transition metal ion incorporation and benzylamine homocoupling reaction was discussed. Shape-specific binding of amine on the cobalt oxide active sites was proposed based on substrate scope study. Tandem synthesis strategy to selectively synthesize amine (aliphatic/aromatic) homo-coupled imines and amine-alcohol cross-coupled imines was introduced. Low-intensity light-induced singlet oxygen and hydroxyl radical-mediated reaction mechanism was proposed based on the EPR, XPS, photoreactor, and reactive oxygen species scavenger tests. Selective and switchable synthesis of homo-coupled (yield 85%) and cross-coupled (yield 87%) products was achieved with sodium azide and mannitol additives.

54 ENVIRONMENTAL SCIENCES↗

Unique phase identification of trimetallic copper iron manganese oxygen carrier using simultaneous differential scanning calorimetry/thermogravimetric analysis during chemical looping combustion reactions with methane

Chemical looping combustion (CLC) is a promising combustion technology that generates heat and sequestration-ready carbon dioxide that is undiluted by nitrogen from the combustion of carbonaceous fuels with an oxygen carrier, or metal oxide. This process is highly dependent on the reactivity and stability of the oxygen carrier. The development of oxygen carriers remains one of the major barriers for commercialization of CLC. Synthetic oxygen carriers, consisting of multiple metal components, have demonstrated enhanced performance and improved CLC operation compared to single metal oxides. However, identification of the complex mixed metal oxide phases that form after calcination or during CLC reactions has been challenging. Without an understanding of the dominant metal oxide phase, it is difficult to determine reaction parameters and the oxygen carrier reduction pathway, which are necessary for CLC reactor design. This is particularly challenging for complex multi-component oxygen carriers such as copper iron manganese oxide (CuFeMnO 4 ). This study aims to differentiate the unique phase formation of a highly reactive, complex trimetallic oxygen carrier, CuFeMnO 4 , from its single and bimetallic counterparts using thermochemical and reaction data obtained from simultaneous differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) during temperature programmed reductions (TPR) with methane. DSC/TGA experiments during TPR with methane provides heat flow data and corresponding reaction rate data that can be used to determine reaction routes and mechanisms during methane reduction. Furthermore, non-isothermal TPR data provides the advantage of distinguishing reactions that may not be observable in isothermal analysis. The detailed thermochemical and reaction data, obtained during TPR with methane, distinguished a unique reduction pathway for CuFeMnO 4 that differed from its single and bimetallic counterparts. This is remarkable since X-ray diffraction (XRD) data alone could not be used to distinguish the reactive trimetallic oxide phase due to overlapping peaks from various single and mixed metal oxides. The unique reduction pathway of CuFeMnO 4 was further characterized in this study using in-situ XRD TPR with methane to determine changes in the dominant trimetallic phase that influenced the thermochemical and reaction rate data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode materials for lithium ion batteries via a polymer-assisted chemical solution method

A novel and facile polymer-assisted chemical solution method is successfully developed for the synthesis of LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM) with unique morphology and nanoparticle nature as cathodes for lithium-ion batteries. At calcination temperature up to 800°C and 900°C, NCM with hexagonal crystal structure of layered α-NaFeO 2 ( R 3 &#xAF; m spacing group) is formed and a lower degree of Ni/Li cation mixing for sample heated at 900°C is determined by XRD Rietveld refinement. SEM and TEM images reveal the uniform size distribution of nanoparticles. HRTEM confirms the single crystalline nature of particles with layered structure. XPS verifies the oxidation state of Co 3+ , Mn 4+ , Ni 2+ and Ni 3+ . As compared with the sample prepared at 800°C, the sample heated at 900°C exhibits a higher initial discharge specific capacity of 189 mAh g -1 being charged to 4.5 V at a current rate of 0.05 C, and better cyclability at 4.3 V cutoff voltage at a current density of 1 C. This method has demonstrated easy tuning compositions and particle sizes of cathode materials.

25 ENERGY STORAGE↗