Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computational Method Validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Accelerating magnonic simulations with the pseudospectral Landau-Lifshitz equation

The pseudospectral Landau-Lifshitz (PS-LL) model can describe atomic-scale magnetic exchange interactions within a continuum framework. This is achieved by employing a convolution kernel that models the nonlocal interaction in a grid-independent manner. Even though the PS-LL was originally introduced to address atomic exchange, any nonlocal kernel can be modeled. In the field of magnonics, the dipole field is fundamental to describe the dispersion relation of magnons, the quasiparticle representation of angular momentum. Because dipole-dipole interactions are long-range, numerical approaches typically rely on convolutions. Here, we demonstrate that the PS-LL model can be used to perform magnonic simulations with a single convolution kernel derived from analytical solutions. We demonstrate a twofold increase in computational speed compared with the full dipole calculation. This approach is valid insofar as the excitations are linear, which is typically the case for magnons. Our results have the potential to accelerate magnonic research, particularly for the inverse design method, where several simulations must be performed to achieve the desired outcome.

Mathematics and computing↗

Quantum simulations of nuclear resonances with variational methods

Background: The many-body nature of nuclear physics problems poses significant computational challenges. These challenges become even more pronounced when studying the resonance states of nuclear systems, which are governed by the non-Hermitian Hamiltonian. Quantum computing, particularly for quantum many-body systems, offers a promising alternative, especially within the constraints of current noisy intermediate-scale quantum (NISQ) devices. Purpose: This work aims to simulate nuclear resonances using quantum algorithms by developing a variational framework compatible with non-Hermitian Hamiltonians and implementing it fully on a quantum simulator. Methods: We employ the complex scaling technique to extract resonance positions classically and adapt it for quantum simulations using a two-step algorithm. First, we transform the non-Hermitian Hamiltonian into a Hermitian form by using the energy variance as a cost function within a variational framework. Second, we perform 𝜃-trajectory calculations to determine optimal resonance positions in the complex energy plane. To address resource constraints on NISQ devices, we utilize Gray code (GC) encoding to reduce qubit requirements. Results: We first validate our approach using a schematic potential model that mimics a nuclear potential, successfully reproducing known resonance energies with high fidelity. We then extend the method to a more realistic 𝛼−𝛼 nuclear potential and compute the 𝐷- and 𝐺-wave resonance energies with a basis size of 𝑁=16, using only four qubits. The quantum simulation results closely match the classical values, demonstrating the feasibility of our approach. Conclusions: This study demonstrates, for the first time, that the complete 𝜃-trajectory method can be implemented on a quantum computer without relying on any classical input beyond the Hamiltonian. The results establish a scalable and efficient quantum framework for simulating resonance phenomena in nuclear systems. This work represents a significant step toward quantum simulations of open quantum systems and lays the foundation for future investigations into resonance structures in nuclear, atomic, and molecular physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

WEC3: Wave Energy Converter Code Comparison Project: Preprint

This paper describes the recently launched Wave Energy Converter Code Comparison (WEC3) project and present preliminary results from this effort. The objectives of WEC3 are to verify and validate numerical modelling tools that have been developed specifically to simulate wave energy conversion devices and to inform the upcoming IEA OES Annex VI Ocean Energy Modelling Verification and Validation project. WEC3 is divided into two phases. Phase 1 consists of a code-to-code verification and Phase II entails code-to-experiment validation. WEC3 focuses on mid-fidelity codes that simulate WECs using time-domain multibody dynamics methods to model device motions and hydrodynamic coefficients to model hydrodynamic forces. Consequently, high-fidelity numerical modelling tools, such as Navier-Stokes computational fluid dynamics simulation, and simple frequency domain modelling tools were not included in the WEC3 project.

16 TIDAL AND WAVE POWER↗

Low-dose x-ray tomography through a deep convolutional neural network

Synchrotron-based X-ray tomography offers the potential of rapid large-scale reconstructions of the interiors of materials and biological tissue at fine resolution. However, for radiation sensitive samples, there remain fundamental trade-offs between damaging samples during longer acquisition times and reducing signals with shorter acquisition times. We present a deep convolutional neural network (CNN) method that increases the acquired X-ray tomographic signal by at least a factor of 10 during low-dose fast acquisition by improving the quality of recorded projections. Short exposure time projections enhanced with CNN show similar signal to noise ratios as compared with long exposure time projections and much lower noise and more structural information than low-dose fats acquisition without CNN. We optimized this approach using simulated samples and further validated on experimental nano-computed tomography data of radiation sensitive mouse brains acquired with a transmission X-ray microscopy. We demonstrate that automated algorithms can reliably trace brain structures in datasets collected with low dose-CNN. As a result, this method can be applied to other tomographic or scanning based X-ray imaging techniques and has great potential for studying faster dynamics in specimens.

60 APPLIED LIFE SCIENCES↗

OECD/NEA expert group on uncertainty analysis for criticality safety assessment: Results of benchmark on sensitivity calculation (phase III)

The sensitivities of the k{sub eff} eigenvalue to neutron cross sections have become commonly used in similarity studies and as part of the validation algorithm for criticality safety assessments. To test calculations of the sensitivity coefficients, a benchmark study (Phase III) has been established by the OECD-NEA/WPNCS/EG UACSA (Expert Group on Uncertainty Analysis for Criticality Safety Assessment). This paper presents some sensitivity results generated by the benchmark participants using various computational tools based upon different computational methods: SCALE/TSUNAMI-3D and -1D, MONK, APOLLO2-MORET 5, DRAGON-SUSD3D and MMKKENO. The study demonstrates the performance of the tools. It also illustrates how model simplifications impact the sensitivity results and demonstrates the importance of 'implicit' (self-shielding) sensitivities. This work has been a useful step towards verification of the existing and developed sensitivity analysis methods. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Computational diagnostics for flame acceleration and transition to detonation in a hydrogen/air mixture

A new computational diagnostic method for pressure-induced compressibility is proposed by projecting its local contribution to the chemical explosive mode (CEM) in the chemical explosive mode analysis (CEMA) framework. The new method is validated for the study of detonation development during the deflagration-to-detonation transition (DDT) process. The flame characteristics are identified through the quantification of individual CEM contributions of chemical reaction, diffusion, and pressure-induced compressibility. Numerical simulations are performed to investigate the DDT processes in a stoichiometric hydrogen-air mixture. A Godunov algorithm, fifth-order in space, and third-order in time are used to solve the fully compressible Navier-Stokes equations on a dynamically adapting mesh. A single-step, calibrated chemical diffusive model (CDM) described by Arrhenius kinetics is used for energy release and conservation between the fuel and the product. The new diagnostic method is first applied to onedimensional (1D) canonical flame configurations followed by two-dimensional (2D) simulations of DDT in an obstructed channel where different detonation initiation scenarios are examined using the new CEMA projection formulation. Detailed examinations of the idealized configuration of detonation initiation through shock focusing mechanism at a flame front are also studied using the new formulation. A comparison of the currently proposed CEMA projection and the original formulation by the authors suggests that including the pressure-induced compressibility is essential for the use of CEMA in DDT process. The results also show that the new formulation of CEMA projection can successively capture the detonation initiation through either a gradient mechanism or a direct initiation mechanism, and therefore can be used as an effective local analytical tool for the computational diagnostics of detonation initiation in a DDT process. It was found that detonation development is characterized by a strong contribution of chemistry role to the CEM which is pivotal to the initiation of detonation. The role of compressibility is found enhanced at the edge of the detonation front where diffusion was found to have minimal effects on detonation development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropic thermal diffusivity and conductivity in SiC/SiC tubes studied by infrared imaging and X-ray computed tomography

Traditional flash diffusivity evaluation of thermal diffusivity/conductivity of composite tubes require machining of specimens. For a thin-wall tube, this method can only be used to obtain through-thickness transport property. A novel method to evaluate anisotropic thermal diffusivity in a composite tube has been developed. Braided SiC/SiC composite tubes were subjected to a xenon flash heating pulse. A high-speed, high-sensitivity infrared camera was used to measure surface temperature changes as a function of time and nondestructively detect subsurface defects/damages, such as macroscopic pores. Standard reference material (Pyroceram 9606) and curved SiC/SiC composite tube specimens were used to validate thermal diffusivity obtained from infrared imaging. Unlike the traditional method, there is no need prepare special specimens, and thermal diffusivity values in three orientations are obtained after a single flash. A finite element analysis model based on x-ray computed tomography scans was developed to simulate the heat transfer. In conclusion, this technique is significant in assessing thermal conductivity and inspecting the health of ceramic tubes during and after service.

36 MATERIALS SCIENCE↗

A Computational Approach and Experimental Validation for the Assessment of Added Mass for Fuel Plates

The goals of this study are to (1) determine the change in the fundamental frequency of the plate when submersed in a fluid and (2) asses the ability for the pseudo-solid approach to determine the fundamental of frequency of a plate in channels. For objective (1) a small experiment, frequency identification in a fluid experiment (FIFE), has been created for the purpose of determining the change in frequency of a plate from air to fluid to fluid channels. The experiment uses sound excitation as a driving frequency and the response is measured via strain gauge, complimented with a hydrophone and microphone. Experimental results have been obtained for both air and water. The experimental results are further used to validate the pseudo-solid approach to achieve objective (2). The pseudo-solid approach has shown excellent agreement with theoretical determinations of frequencies of bodies submersed in a fluid. This paper outlines the experimental results of the FIFE as well as the validity of the pseudo-solid method

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

GPU Data Access on Complex Geometries for D3Q19 Lattice Boltzmann Method

GPU performance of the lattice Boltzmann method (LBM) depends heavily on memory access patterns. When LBM is advanced with GPUs on complex computational domains, geometric data is typically accessed indirectly, and lattice data is typically accessed lexicographically in the Structure of Array (SoA) layout. Although there are a variety of existing access patterns beyond the typical choices, no study has yet examined the relative efficacy between them. Here, we compare a suite of memory access schemes via empirical testing and performance modeling. We find strong evidence that semi-direct addressing is the superior addressing scheme for the majority of cases examined: Semi-direct addressing increases computational speed and often reduces memory consumption. For lattice layout, we find that the Collected Structure of Arrays (CSoA) layout outperforms the SoA layout. When compared to state-of-the-art practices, our recommended addressing modifications lead to performance gains between 10-40% across different complex geometries, fluid volume fractions, and resolutions. The modifications also lead to a decrease in memory consumption by as much as 17%. Having discovered these improvements, we examine a highly resolved arterial geometry on a leadership class system. On this system we present the first near-optimal strong results for LBM with arterial geometries run on GPUs. We also demonstrate that the above recommendations remain valid for large scale, many device simulations, which leads to an increased computational speed and average memory usage reductions. To understand these observations, we employ performance modeling which reveals that semi-direct methods outperform indirect methods due to a reduced number of total loads/stores in memory, and that CSoA outperforms SoA and bundling due to improved caching behavior.

Herschlag, Gregory↗

Assessing the capability of continuum and discrete particle methods to simulate gas-solids flow using DNS predictions as a benchmark

For this study, gas–solids flow in a three-dimension periodic domain was numerically investigated by direct numerical simulation (DNS), computational fluid dynamic-discrete element method (CFD-DEM) and two-fluid model (TFM). DNS data obtained by finely resolving the flow around every particle are used as a benchmark to assess the validity of coarser DEM and TFM approaches. The CFD-DEM predicts the correct cluster size distribution and under-predicts the macro-scale slip velocity even with a grid size as small as twice the particle diameter. The TFM approach predicts larger cluster size and lower slip velocity with a homogeneous drag correlation. Although the slip velocity can be matched by a simple modification to the drag model, the predicted voidage distribution is still different from DNS: Both CFD-DEM and TFM over-predict the fraction of particles in dense regions and under-predict the fraction of particles in regions of intermediate void fractions. Also, the cluster aspect ratio of DNS is smaller than CFD-DEM and TFM. Since a simple correction to the drag model can predict a correct slip velocity, it is hopeful that drag corrections based on more elaborate theories that consider voidage gradient and particle fluctuations may be able to improve the current predictions of cluster distribution.

42 ENGINEERING↗

Computational fluid dynamics simulations of a binary particle bed in a riser-based carbon stripper for chemical looping combustion

Chemical-looping combustion (CLC) is a next generation combustion technology that shows great promise as a solution for the need of high-efficiency low-cost carbon capture from fossil fueled power plants. In this paper, numerical simulations are conducted of a binary particle bed associated with a coal-direct CLC system consisting of coal (represented by plastic beads) and oxygen carrier particles and validated against an experimental riser-based carbon stripper. The detailed particle dynamics and solid-gas and solid-solid interactions are investigated using the Lagrangian particle-tracking approach known as the discrete element method coupled with the computational fluid dynamics solution for the flow field. The simulation results of the fluidization behavior and the separation ratio of the particles are in excellent agreement with the experiment. In conclusion, a credible simulation of a binary particle bed is of particular importance for understanding the details of the fluidization behavior; the baseline simulation established in this work can be used as a tool for designing and optimizing the performance of such systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Code to Code Benchmark for HTGR Fuel Element Depletion

The current lack of well-qualified experimental measurements for spent HGTR fuel elements limits the validation of advanced doubly heterogeneous depletion methods. Because of this shortage of data, a benchmark was developed as the first, simplest phase in a planned series of increasingly complex set of code-to-code benchmarks. The intent of this benchmark was to encourage submission of a wide range of computational results for depletion calculations in a set of basic fuel cell models. Comparison of results using independent methods and data should provide insight into potential limitations in various modeling approximations. The benchmark seeks to provide the simplest possible models, in order to minimize the effect of competing and potentially offsetting phenomena that might mask weaknesses in given methods. Twenty-one sets of results were submitted by twelve participants internationally. Various approaches were used for the treatment of microscopic grains dispersed in fuel elements in the second and third parts of the benchmark, including explicit treatment of grains distributed within a regular lattice, a randomized distribution of explicit grains, reactivity-equivalent physical transformation and a two-pass homogenization with disadvantage factors. The broad agreement appears to validate each of the double heterogeneity treatments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Involute Working Group – Validation of CFD Turbulence Models for Steady-State Safety Analysis

There are three research reactors in the world having fuel plates curved as circle-involute (a spiral generated around a circle): The Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) located in Tennessee, U.S.A. [ORNL, 2018]; The Laue-Langevin Institute (ILL) High Flux Reactor (RHF) located in Grenoble, France [ILL, 2018]; and, The Technical University of Munich (TUM) Research Neutron Source Heinz Maier-Leibnitz (FRM II) located in Garching, Germany [TUM, 2018]. All three reactors are currently using Highly Enriched Uranium (HEU, 235U/U ≥ 20 wt. %) as fuel and all three are actively engaged in activities to convert to Low Enriched Uranium (LEU, 235U/U < 20 wt. %) fuel. More information on these reactors can be found in Section two. For various reasons, these reactors have expressed interest in using Computational Fluid Dynamics (CFD) tools to perform their Steady-State Thermal-Hydraulic (SSTH) safety calculations. Using CFD tools for SSTH analysis represents generally a significant departure from traditional methods and requires thorough verification and validation (V&V) to be accepted by regulators. This is why Argonne National Laboratory (ANL) and the involute reactors formed an informal group to help each other in this endeavor. This so-called Involute Working Group (IWG) aims at supporting the qualification of CFD tools for SSTH safety calculations. Activities include benchmarking, code-to-code comparison, Verification and Validation (V&V) as well as technical support. More information on the IWG and the reasons why involute-plate reactors are interested in CFD can be found in Section three. The present study aims at testing three turbulence models commonly implemented in commercial software (namely K-Epsilon, K-Omega and Reynolds-Stress) and assessing their relevance for involute-plate reactor application. An experiment performed by Gambill and Bundy in 1961 was performed to measure heat transfer coefficients in conditions prototypic of the HFIR reactor [Gambill, 1961]. More details on this experiment are provided in Section four. Based on the information available, CFD models of this experiment have been created and the experimental results have been compared to the ones obtained with these CFD models. CFD models and the results of this comparison are provided in Section five.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Density functional theory approach to gold-ligand interactions: Separating true effects from artifacts

Donor-acceptor interactions are notoriously difficult and unpredictable for conventional density functional theory (DFT) methodologies. This work presents a reliable computational treatment of gold-ligand interactions of the donor-acceptor type within DFT. These interactions require a proper account of the ionization potential of the electron donor and electron affinity of the electron acceptor. This is accomplished in the Generalized Kohn Sham framework that allows one to relate these properties to the frontier orbitals in DFT via the tuning of range-separated functionals. A donor and an acceptor typically require different tuning schemes. This poses a problem when the binding energies are calculated using the supermolecular method. A two-parameter tuning for the monomer properties ensures that a common functional, optimal for both the donor and the acceptor, is found. A reliable DFT approach for these interactions also takes into account the dispersion contribution. The approach is validated using the water dimer and the (HAuPH{sub 3}){sub 2} aurophilic complex. Binding energies are computed for Au{sub 4} interacting with the following ligands: SCN{sup −}, benzenethiol, benzenethiolate anion, pyridine, and trimethylphosphine. The results agree for the right reasons with coupled-cluster reference values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A combined experimental and computational analysis of failure mechanisms in open-hole cross-ply laminates under flexural loading

In this work, integrated experimental tests and computational modeling are proposed to investigate the failure mechanisms of open-hole cross-ply carbon fiber reinforced polymer (CFRP) laminated composites. In particular, we propose two effective methods, which include width-tapered double cantilever beam (WTDCB) and fixed-ratio mixed-mode end load split (FRMMELS) tests, to obtain the experimental data more reliably. We then calibrate the traction-separation laws of cohesive zone model (CZM) used among laminas of the composites by leveraging these two methods. The experimental results of fracture energy, i.e. G Ic and G Tc , obtained from WTDCB and FRMMELS tests are generally insensitive to the crack length thus requiring no effort to accurately measure the crack tip. Moreover, FRMMELS sample contains a fixed mixed-mode ratio of G IIc /G Tc depending on the width taper ratio. Examining comparisons between experimental results of FRMMELS tests and failure surface of B–K failure criterion predicted from a curve fitting, good agreement between the predictions and experimental data has been found, indicating that FRMMELS tests are an effective method to determine mixed-mode fracture criterion. In addition, a coupled experimental-computational modeling of WTDCB, edge notched flexure, and FRMMELS tests are adopted to calibrate and validate the interfacial strengths. Finally, failure mechanisms of open-hole cross-ply CFRP laminates under flexural loading have been studied systematically using experimental and multi-scale computational analyses based on the developed CZM model. The initiation and propagation of delamination, the failure of laminated layers as well as load-displacement curves predicted from computational analyses are in good agreement with what we have observed experimentally.

36 MATERIALS SCIENCE↗

Automatic Substitute Computed Tomography Generation and Contouring for Magnetic Resonance Imaging (MRI)-Alone External Beam Radiation Therapy From Standard MRI Sequences

Purpose: To validate automatic substitute computed tomography CT (sCT) scans generated from standard T2-weighted (T2w) magnetic resonance (MR) pelvic scans for MR-Sim prostate treatment planning. Patients and Methods: A Siemens Skyra 3T MR imaging (MRI) scanner with laser bridge, flat couch, and pelvic coil mounts was used to scan 39 patients scheduled for external beam radiation therapy for localized prostate cancer. For sCT generation a whole-pelvis MRI scan (1.6 mm 3-dimensional isotropic T2w SPACE [Sampling Perfection with Application optimized Contrasts using different flip angle Evolution] sequence) was acquired. Three additional small field of view scans were acquired: T2w, T2*w, and T1w flip angle 80° for gold fiducials. Patients received a routine planning CT scan. Manual contouring of the prostate, rectum, bladder, and bones was performed independently on the CT and MR scans. Three experienced observers contoured each organ on MRI, allowing interobserver quantification. To generate a training database, each patient CT scan was coregistered to their whole-pelvis T2w using symmetric rigid registration and structure-guided deformable registration. A new multi-atlas local weighted voting method was used to generate automatic contours and sCT results. Results: The mean error in Hounsfield units between the sCT and corresponding patient CT (within the body contour) was 0.6 ± 14.7 (mean ± 1 SD), with a mean absolute error of 40.5 ± 8.2 Hounsfield units. Automatic contouring results were very close to the expert interobserver level (Dice similarity coefficient): prostate 0.80 ± 0.08, bladder 0.86 ± 0.12, rectum 0.84 ± 0.06, bones 0.91 ± 0.03, and body 1.00 ± 0.003. The change in monitor units between the sCT-based plans relative to the gold standard CT plan for the same dose prescription was found to be 0.3% ± 0.8%. The 3-dimensional γ pass rate was 1.00 ± 0.00 (2 mm/2%). Conclusions: The MR-Sim setup and automatic sCT generation methods using standard MR sequences generates realistic contours and electron densities for prostate cancer radiation therapy dose planning and digitally reconstructed radiograph generation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Simple strategy for the simulation of axially symmetric large-area metasurfaces

Metalenses are composed of nanostructures for focusing light and have been widely explored in many exciting applications. However, their expanding dimensions pose simulation challenges. We propose a method to simulate metalenses in a timely manner using vectorial wave and ray tracing models. We sample the metalens’s radial phase gradient and locally approximate the phase profile by a linear phase response. Each sampling point is modeled as a binary blazed grating, employing the chosen nanostructure, to build a transfer function set. The metalens transmission or reflection is then obtained by applying the corresponding transfer function to the incoming field on the regions surrounding each sampling point. Fourier optics is used to calculate the scattered fields under arbitrary illumination for the vectorial wave method, and a Monte Carlo algorithm is used in the ray tracing formalism. We validated our method against finite-difference time domain simulations at 632 nm, and we were able to simulate metalenses larger than 3000 wavelengths in diameter on a personal computer.

Martins, Augusto (ORCID:0000000295546481)↗

w18_empower-aids - HIV Envelope at Multiple Scales [Slides]

Being the sole viral protein entity expressed on the surface of the Human Immunodeficiency Virus (HIV) envelope, the Envelope Glycoprotein (Env) remains the only plausible immunological target. Nevertheless, extreme dynamic heterogeneity, structural complexity, and system size make the study of these glycoproteins immensely challenging. We have utilized the Institutional Computing (IC) resources to overcome some of these challenges in computational modeling of the Env glycoproteins. This integrated technique can sufficiently sample a physiologically relevant conformational space accessible to carbohydrates, in a very short time. This method has been validated by quantitatively comparing to experimental cryoEM maps of the HIV Env protein. We have employed graph theory to capture the glycan shield topological network, pinpoint potential interaction pathways, and identify concerted behavior of the glycans. Analyses of various network attributes, such as relative centrality of different glycan positions, identification of communities, and critical subnetwork features, have aided in detailed examination of the glycan shield. Starting from select structures modeled by the pipeline, we are performing large-scale atomistic MD simulations to study the temporal behavior of this system, which will help elucidate biologically relevant antibody behavior. This method can be seamlessly extended to benefit research in Zika, Ebola and other high-density glycosylated systems.

59 BASIC BIOLOGICAL SCIENCES↗