Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computer programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Computer program for supersonic Kernel-function flutter analysis of thin lifting surfaces

This report describes a computer program (program D2180) that has been prepared to implement the analysis described in (N71-10866) for calculating the aerodynamic forces on a class of harmonically oscillating planar lifting surfaces in supersonic potential flow. The planforms treated are the delta and modified-delta (arrowhead) planforms with subsonic leading and supersonic trailing edges, and (essentially) pointed tips. The resulting aerodynamic forces are applied in a Galerkin modal flutter analysis. The required input data are the flow and planform parameters including deflection-mode data, modal frequencies, and generalized masses.

Cunningham, H. J.↗
NASA NTRS1975

VECTAN II - A computer program for the spatial analysis of the vectorcardiogram

This paper presents the operation of a digital computer program, VECTAN II, for the spatial analysis of the vectorcardiogram (VCG). The program incorporates a unique waveform recognition algorithm based on the spatial vector length which has been shown to perform better than previous algorithms. The waveform analysis employed by the program considers the vectorcardiogram as a three dimensional entity rather than as scalar or planar representations. VECTAN II is designed chiefly to measure and quantify the VCG response of normal subjects to a controlled stress by analyzing one VCG complex every five seconds throughout a long experiment. The program has been used to analyze data from the NASA Johnson Space Center Cardiovascular Laboratory, from the pre- and postflight medical examinations of the Apollo 15, 16 and 17 crewmen, and from onboard Skylab experiments.

Golden, D. P., Jr.↗
NASA NTRS1976

COREST: A FORTRAN computer program to analyze paralinear oxidation behavior and its application to chromic oxide forming alloys

A FORTRAN computer program (COREST) was developed to analyze the high-temperature paralinear oxidation behavior of metals. It is based on a mass-balance approach and uses typical gravimetric input data. COREST was applied to predominantly Cr2O3-forming alloys tested isothermally for long times. These alloys behaved paralinearly above 1100 C as a result of simultaneous scale formation and scale vaporization. Output includes the pertinent formation and vaporization constants and kinetic values of interest. COREST also estimates specific sample weight and specific scale weight as a function of time. Most importantly, from a corrosion standpoint, it estimates specific metal loss.

Barrett, C. E.↗
NASA NTRS1977

Finite-element computer program for axisymmetric loading situations where components may have a relative interference fit

A finite element computer program which enables the analysis of distortions and stresses occurring in compounds having a relative interference is presented. The program is limited to situations in which the loading is axisymmetric. Loads arising from the interference fit(s) and external, inertial, and thermal loadings are accommodated. The components comprise several different homogeneous isotropic materials whose properties may be a function of temperature. An example illustrating the data input and program output is given.

Taylor, C. M.↗
NASA NTRS1980

Computer program documentation: CYBER to Univac binary conversion user's guide

A user's guide for a computer program which will convert SINDA temperature history data from CDC (Cyber) binary format to UNIVAC 1100 binary format is presented. The various options available, the required input, the optional output, file assignments, and the restrictions of the program are discussed.

Martin, E. W.↗
NASA NTRS1987

Laminate-Moisture-Analysis Computer Program

Diffusion and deleterious effects of moisture predicted. General One-Dimensional, One Material Moisture Analysis computer program developed to predict moisture gradient across composite laminate where moisture enters two surfaces and flows in direction between these surfaces. Designed to monitor flow of moisture in Space Shuttle Orbiter payload bay doors but applicable for general use. Program written in FORTRAN IV.

Martin, Ronald T.↗
NASA NTRS1988

Experimental Test Of Aerodynamic Computer Program

Linear potential-flow theory applied to advanced airplane design. Report discusses use of PANAIR computer program to predict airflow about advanced fighter aircraft. Predictions compared with measurements about scale model of aircraft in wind tunnel at mach numbers of 0.6, 0.9, and 1.2 and at angles-of-attack from 0 to 10 degree.

Madson, M. D.↗
NASA NTRS1989

Comparison study of gear dynamic computer programs at NASA Lewis Research Center

A comparison study was performed on four gear dynamic analysis computer programs developed under NASA/Army sponsorship. These programs are GRDYNMULT (a multimesh program applicable to a number of epicyclic systems), TELSGE (a single mesh program), PGT (a multimesh program applicable to a planetary system with three planets), and DANST (a single mesh program). The capabilities and features, input and output options, and technical aspects of the programs were reviewed and compared. Results are presented in a concise tabular form. Parametric studies of the program models were performed to investigate the predicted results of the programs as input parameters such as speed, torque, and mesh damping were varied. In general, the program models predicted similar dynamic load and stress levels as operating conditions were varied. Flash temperature predictions from programs GRDYNMULT and TELSGE indicated similar trends; however, actual values were not in close agreement. The program GRDYNMULT was found to be the most versatile in system size, type, and analysis capabilities. The programs DANST, TELSGE, and PGT are more specialized for specific systems; however, in specific areas they provide a more detailed treatment than GRDYNMULT.

Zakrajsek, James J.↗
NASA NTRS1992

Computer Program Aids Design Of Impeller Blades

Impeller blades for centrifugal turbopumps designed quickly with help of computer program. Generates blade contours and continually subjects them to evaluation. Checks physical parameters to ensure they are compatible with required performance and recycles design if criteria not met. Program written for centrifugal turbomachinery, also adapted to such axial pump components as inducer blades and stator vanes.

Chen, Wei-Chung↗
NASA NTRS1973

Computer program to perform cost and weight analysis of transport aircraft. Volume 2: Technical volume

An improved method for estimating aircraft weight and cost using a unique and fundamental approach was developed. The results of this study were integrated into a comprehensive digital computer program, which is intended for use at the preliminary design stage of aircraft development. The program provides a means of computing absolute values for weight and cost, and enables the user to perform trade studies with a sensitivity to detail design and overall structural arrangement. Both batch and interactive graphics modes of program operation are available.

Source record↗
NASA NTRS1976

FLEXSTAB: A computer program for the prediction of loads and stability and control of flexible aircraft

Capabilities of the FLEXSTAB Computer Program System are described and illustrated. Aeroelastic analysis of a wide variety of aircraft configurations is performed. The aerodynamic theory used in FLEXSTAB is applicable to both steady and unsteady, subsonic and supersonic flow for multiple wing-body tail nacelle configurations with a plane of symmetry. For unsteady flow calculations, an unsteady aerodynamic theory is used which is appropriate for the low reduced frequencies associated with aircraft flight dynamics. The aircraft is modeled as either a rigid or flexible structure. The computer trims the aircraft in steady reference flight and computes both static and dynamic stability and control derivatives and the stability behavior about the trim condition. The airplane lifting pressure distribution, aerodynamic and inertia loads and deflected shape are also computed.

Perkin, B. R.↗
NASA NTRS1982

A computer program for wing subsonic aerodynamic performance estimates including attainable thrust and vortex lift effects

Numerical methods incorporated into a computer program to provide estimates of the subsonic aerodynamic performance of twisted and cambered wings of arbitrary planform with attainable thrust and vortex lift considerations are described. The computational system is based on a linearized theory lifting surface solution which provides a spanwise distribution of theoretical leading edge thrust in addition to the surface distribution of perturbation velocities. The approach used relies on a solution by iteration. The method also features a superposition of independent solutions for a cambered and twisted wing and a flat wing of the same planform to provide, at little additional expense, results for a large number of angles of attack or lift coefficients. A previously developed method is employed to assess the portion of the theoretical thrust actually attainable and the portion that is felt as a vortex normal force.

Carlson, H. W.↗
NASA NTRS1972

Computer program for quasi-three-dimensional calculation of surface velocities and choking flow for turbomachine blade rows

Computer program, CHANEL, can obtain quasi-three-dimensional solutions in any well-guided channel. Conditions that can be handled by program that could not be handled previously are nonuniform inlet temperature, pressure, prewhirl, nonaxial flow where meridional flow angle, meridional stream-line curvature, and radius can vary as desired from hub to tip.

Katsanis, T.↗