Search NASA⌕ Search

SEARCH · Search NASA

Results for “Contacts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Generalized Procedure for Improved Accuracy of Thermal Contact Resistance Measurements for Materials With Arbitrary Temperature-Dependent Thermal Conductivity

Thermal contact resistance (TCR) is most commonly measured using one-dimensional steady-state calorimetric techniques. In the experimental methods we utilized, a temperature gradient is applied across two contacting beams and the temperature drop at the interface is inferred from the temperature profiles of the rods that are measured at discrete points. During data analysis, thermal conductivity of the beams is typically taken to be an average value over the temperature range imposed during the experiment. Our generalized theory is presented and accounts for temperature-dependent changes in thermal conductivity. The procedure presented enables accurate measurement of TCR for contacting materials whose thermal conductivity is any arbitrary function of temperature. For example, it is shown that the standard technique yields TCR values that are about 15% below the actual value for two specific examples of copper and silicon contacts. Conversely, the generalized technique predicts TCR values that are within 1% of the actual value. The method is exact when thermal conductivity is known exactly and no other errors are introduced to the system.

42 ENGINEERING↗

A CHANGE IN THE LIGHT CURVE OF KUIPER BELT CONTACT BINARY (139775) 2001 QG{sub 298}

New observations show that the light curve of Kuiper Belt contact binary (139775) 2001 QG{sub 298} has changed substantially since the first observations in 2003. The 2010 light curve has a peak-to-peak photometric range of {Delta}m{sub 2010} = 0.7 {+-} 0.1 mag, significantly lower than in 2003, {Delta}m{sub 2003} = 1.14 {+-} 0.04 mag. This change is most simply interpreted if 2001 QG{sub 298} has an obliquity near 90{sup 0}. The observed decrease in {Delta}m is caused by a change in viewing geometry, from equator-on in 2003 to nearly 16{sup 0} (the orbital angular distance covered by the object between the observations) off the equator in 2010. The 2003 and 2010 light curves have the same rotation period and appear in phase when shifted by an integer number of full rotations, also consistent with high obliquity. Based on the new 2010 light curve data, we find that 2001 QG{sub 298} has an obliquity of {epsilon} = 90{sup 0} {+-} 30{sup 0}. Current estimates of the intrinsic fraction of contact binaries in the Kuiper Belt are debiased assuming that these objects have randomly oriented spins. If, as 2001 QG2{sub 98}, Kuiper Belt Object contact binaries tend to have large obliquities, a larger correction is required. As a result, the abundance of contact binaries may be larger than previously believed.

79 ASTRONOMY AND ASTROPHYSICS↗

PHOTOMETRIC STUDIES OF THREE NEGLECTED SHORT-PERIOD CONTACT BINARIES GN BOOTIS, BL LEONIS, AND V1918 CYGNI

We present new photometry for three short-period contact binaries, GN Boo, BL Leo, and V1918 Cyg, observed from 2008 December to 2012 April using several small telescopes in China. Photometric models were deduced from new observations using the updated Wilson-Devinney Code. The results show that GN Boo and BL Leo are W-type contact binaries, while V1918 Cyg is an A-type one. The mass ratios and fill-out factors are q = 0.320({+-} 0.002) and f = 5.8({+-} 0.1)% for GN Boo, q = 0.476({+-} 0.005) and f = 21.3({+-} 1.1)% for BL Leo, q = 0.264({+-} 0.002), and f = 49.7({+-} 0.7)% for V1918 Cyg, respectively. From the (O - C) curves, it is discovered that the orbital periods of three binaries have varied in a complicated way, i.e., cyclic oscillation for GN Boo, long-term period decrease for BL Leo, and both for V1918 Cyg. The cyclic variations for GN Boo and V1918 Cyg may probably be attributed to the magnetic activity of the primary component or light-time effect due to the third body. Meanwhile, the secular period decreases for BL Leo and V1918 Cyg may result from mass transfer from the primary to the secondary, accompanying the mass and angular momentum loss from the central system. Finally, GN Boo, BL Leo, and V1918 Cyg will evolve into deep contact binaries. Additionally, a statistical study of 37 contact binaries with decreasing periods is given. We obtained the relations of q - f and q - dln P/dt, and preliminarily determined the mass loss rate of dln M/dt from the binary system.

79 ASTRONOMY AND ASTROPHYSICS↗

Photometric study and period analysis of the contact binary XZ Leonis

We present multi-color CCD photometry of the neglected contact binary XZ Leo. Completely covered VRI band light curves and four times of minimum light were obtained. Combining the photometric and previously published radial-velocity data, a revised photometric analysis was carried out for the binary system by applying the Wilson–Devinney code. With a hot spot placed on the massive primary component near the neck region of the common envelope, the light curves were satisfactorily modeled. The photometric solution combined with the radial-velocity solution reveals that XZ Leo is an A-type contact binary with a degree of contact of 24(±1)%. The absolute parameters of the components were determined to be M{sub 1} = 1.74(±0.06)M{sub ⊙}, M{sub 2} = 0.61(±0.02)M{sub ⊙}, R{sub 1} = 1.69(±0.01)R{sub ⊙}, R{sub 2} = 1.07(±0.01)R{sub ⊙}, L{sub 1} = 6.73(±0.08) L{sub ⊙}, and L{sub 2} = 2.40(±0.04)L{sub ⊙}. Based on all the available data, the long-term orbital period behavior of the system was investigated. It indicates that the binary system was undergoing a continuous orbital period increase in the past three decades with a rate of dP/dt =+6.12×10{sup −8} days yr{sup −1}, which suggests a probable mass transfer from the secondary to the primary component at a rate of dM/dt=3.92×10{sup −8}M{sub ⊙} yr{sup −1}. The binary system is expected to evolve into the broken-contact stage in 1.56×10{sup 6} years. This could be evidence supporting the thermal relaxation oscillation theory.

79 ASTRONOMY AND ASTROPHYSICS↗

BI VULPECULAE: A SIAMESE TWIN WITH TWO VERY SIMILAR COOL STARS IN SHALLOW CONTACT

BI Vul is a cool eclipsing binary star (Sp. = K3 V) with a short period of 0.2518 days. The first charge-coupled device (CCD) light curves of the binary in the BVRI obtained on 2012 August 21 are presented and are analyzed using the Wilson-Devinney code. It is discovered that BI Vul is a marginal contact binary system (f = 8.7%) that contains two very similar cool components (q = 1.037). Both the marginal contact configuration and the extremely high mass ratio suggest that it is presently evolving into contact with little mass transfer between the components and it is at the beginning stage of contact evolution. By using all available times of minimum light, the variations in the orbital period are investigated for the first time. We find that the observed – calculated (O – C) curve of BI Vul shows a cyclic change with a period of 10.8 yr and an amplitude of 0.0057 days, while it undergoes a downward parabolic variation. The cyclic oscillation is analyzed for the light-travel time effect that arises from the gravitational influence of a possible third stellar object. The mass and orbital separation of the third body are estimated as M {sub 3} ∼ 0.30 M {sub ☉} and ∼4.9 AU, respectively. The downward parabolic change reveals a long-term period decrease at a rate of P-dot = -9.5 x 10{sup -8} days yr{sup –1}. The period decrease may be caused by angular momentum loss via magnetic stellar wind and/or it is only a part of a long-period (longer than 32 yr) cyclic variation, which may reveal the presence of another stellar companion in a wider orbit. These observational properties indicate that the formation of the Siamese twin is driven by magnetic braking and the third stellar companion should play an important role by removing angular momentum from the central binary.

79 ASTRONOMY AND ASTROPHYSICS↗

Imaging the flow of holes from a collimating contact in graphene

A beam of holes formed in graphene by a collimating contact is imaged using a liquid-He cooled scanning probe microscope (SPM). The mean free path of holes is greater than the device dimensions. A zigzag shaped pattern on both sides of the collimating contact absorbs holes that enter at large angles. The image charge beneath the SPM tip defects holes, and the pattern of flow is imaged by displaying the change in conductance between contacts on opposite sides, as the tip is raster scanned across the sample. Collimation is confirmed by bending hole trajectories away from the receiving contact with an applied magnetic field. The SPM images agree well with ray-tracing simulations.

36 MATERIALS SCIENCE↗

SDSS J001641-000925: THE FIRST STABLE RED DWARF CONTACT BINARY WITH A CLOSE-IN STELLAR COMPANION

SDSS J001641-000925 is the first red dwarf contact binary star with an orbital period of 0.19856 days that is one of the shortest known periods among M-dwarf binary systems. The orbital period was detected to be decreasing rapidly at a rate of P-dot ∼8 s yr{sup −1}. This indicated that SDSS J001641-000925 was undergoing coalescence via a dynamical mass transfer or loss and thus this red dwarf contact binary is dynamically unstable. To understand the properties of the period change, we monitored the binary system photometrically from 2011 September 2 to 2014 October 1 by using several telescopes in the world and 25 eclipse times were determined. It is discovered that the rapid decrease of the orbital period is not true. This is contrary to the prediction that the system is merging driven by rapid mass transfer or loss. Our preliminary analysis suggests that the observed minus calculated (O–C) diagram shows a cyclic oscillation with an amplitude of 0.00255 days and a period of 5.7 yr. The cyclic variation can be explained by the light travel time effect via the presence of a cool stellar companion with a mass of M {sub 3}sin i' ∼ 0.14 M {sub ☉}. The orbital separation between the third body and the central binary is about 2.8 AU. These results reveal that the rarity of red dwarf contact binaries could not be explained by rapidly dynamical destruction and the presence of the third body helps to form the red dwarf contact binary.

79 ASTRONOMY AND ASTROPHYSICS↗

Soft sample deformation, damage and induced electromechanical property changes in contact- and tapping-mode atomic force microscopy

Probe-induced soft sample damage in atomic force microscopy (AFM), as well as the resulting alteration of local mechanical and electrical properties of the material are explored, specifically comparing contact-mode and intermittent-contact-mode imaging methods. In our experiments, performed on conductive polymer films, induced changes are present in contact-mode imaging while they are negligible or absent in tapping-mode imaging. Here, to understand this result, a viscoelastic parameter extraction is performed, which suggests that permanent sample deformation can readily occur for tip-sample interactions with a duration on the timescale of contact-mode interactions. Using the extracted viscoelastic parameters, a dynamic AFM simulation is conducted, which suggests that the material responds more elastically with reduced or absent sample damage in tapping-mode AFM, due to the higher rate of mechanical deformation and shorter timescales.

42 ENGINEERING↗

Contact interaction in an unitary ultracold Fermi gas

An ultracold Fermi atomic gas at unitarity presents universal properties that in the dilute limit can be well described by a contact interaction. By employing a guiding function with correct boundary conditions and making simple modifications to the sampling procedure we are able to calculate the properties of a true contact interaction with the diffusion Monte Carlo method. The results are obtained with small variances. Our calculations for the Bertsch and contact parameters are in excellent agreement with published experiments. The possibility of using a more faithful description of ultracold atomic gases can help uncover additional features of ultracold atomic gases. In addition, this work paves the way to perform quantum Monte Carlo calculations for other systems interacting with contact interactions, where the description using potentials with finite effective range might not be accurate.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Temperature Dependence of the Universal Contact Parameter in a Unitary Fermi Gas

The contact I, introduced by Tan, has emerged as a key parameter characterizing universal properties of strongly interacting Fermi gases. For ultracold Fermi gases near a Feshbach resonance, the contact depends upon two quantities: the interaction parameter 1/(k{sub F}a), where k{sub F} is the Fermi wave vector and a is the s-wave scattering length, and the temperature T/T{sub F}, where T{sub F} is the Fermi temperature. We present the first measurements of the temperature dependence of the contact in a unitary Fermi gas using Bragg spectroscopy. The contact is seen to follow the predicted decay with temperature and shows how pair-correlations at high momentum persist well above the superfluid transition temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thin Films in Partial Wetting: Internal Selection of Contact-Line Dynamics

When 5 a liquid touches a solid surface, it spreads to minimize the system’s energy. The classic thin-film model describes the spreading as an interplay between gravity, capillarity and viscous forces, but cannot see an end to this process as it does not account for the nonhydrodynamic liquid–solid interactions. Even though these interactions are important only close to the contact line, where the liquid, solid and gas meet, they have macroscopic implications: in the partial-wetting regime, a liquid puddle ultimately stops spreading. We show that 10 by incorporating these intermolecular interactions, the free energy of the system at equilibrium can be cast in a Cahn–Hilliard framework with a height-dependent interfacial tension. Utilizing this free energy, we derive a mesoscopic thin-film model that describes statics and dynamics of liquid spreading in the partial-wetting regime. The height-dependence of the interfacial tension introduces a localized apparent slip in the contact-line region and leads to compactly-supported spreading states. In our model, the contact line dynamics emerge naturally as 15 part of the solution and are therefore nonlocally coupled to the bulk flow. Surprisingly, we find that even in the gravity-dominated regime, the dynamic contact angle follows the Cox–Voinov law.

36 MATERIALS SCIENCE↗

Contact in the Unitary Fermi Gas across the Superfluid Phase Transition

A quantity known as the contact is a fundamental thermodynamic property of quantum many-body systems with short-range interactions. Determination of the temperature dependence of the contact for the unitary Fermi gas of infinite scattering length has been a major challenge, with different calculations yielding qualitatively different results. Here we use finite-temperature auxiliary-field quantum Monte Carlo (AFMC) methods on the lattice within the canonical ensemble to calculate the temperature dependence of the contact for the homogeneous spin-balanced unitary Fermi gas. We extrapolate to the continuum limit for 40, 66, and 114 particles, eliminating systematic errors due to finite-range effects. We observe a dramatic decrease in the contact as the superfluid critical temperature is approached from below, followed by a gradual weak decrease as the temperature increases in the normal phase. Our theoretical results are in excellent agreement with the most recent precision ultracold atomic gas experiments. Here, we also present results for the energy as a function of temperature in the continuum limit.

74 ATOMIC AND MOLECULAR PHYSICS↗

Significant reduction in errors associated with nonbonded contacts in protein crystal structures: automated all-atom refinement with PrimeX

All-atom models derived from moderate-resolution protein crystal structures contain a high frequency of close nonbonded contacts, independent of the major refinement program used for structure determination. All-atom refinement with PrimeX corrects many of these problematic interactions, producing models that are better suited for use in computational chemistry and related applications. All-atom models are essential for many applications in molecular modeling and computational chemistry. Nonbonded atomic contacts much closer than the sum of the van der Waals radii of the two atoms (clashes) are commonly observed in such models derived from protein crystal structures. A set of 94 recently deposited protein structures in the resolution range 1.5–2.8 Å were analyzed for clashes by the addition of all H atoms to the models followed by optimization and energy minimization of the positions of just these H atoms. The results were compared with the same set of structures after automated all-atom refinement with PrimeX and with nonbonded contacts in protein crystal structures at a resolution equal to or better than 0.9 Å. The additional PrimeX refinement produced structures with reasonable summary geometric statistics and similar R{sub free} values to the original structures. The frequency of clashes at less than 0.8 times the sum of van der Waals radii was reduced over fourfold compared with that found in the original structures, to a level approaching that found in the ultrahigh-resolution structures. Moreover, severe clashes at less than or equal to 0.7 times the sum of atomic radii were reduced 15-fold. All-atom refinement with PrimeX produced improved crystal structure models with respect to nonbonded contacts and yielded changes in structural details that dramatically impacted on the interpretation of some protein–ligand interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local nm-Scale Imaging of Electrical Contact for Series Resistance Degradation of Silicon Solar Cells

We report on an electrical conduction mechanism for series resistance (Rs) degradation observed in a utility scale solar farm by nm-scale imaging of the local resistance at the Ag/Si interface of c-Si front metallization. Scanning spreading resistance microscopy imaging revealed that the number of point or small area electrical contacts decreased in a degraded cell compared to an unaffected cell, demonstrating the direct root cause of the Rs degradation. The degraded cell shows both a morphological and chemical difference in the screen-printed finger contact compared to the unaffected cell, which likely caused the degradation during the long-term field service. The reduction in electrical contact is likely caused by a structural change: The Ag particles in contact with the Si cell aggregate into bulk Ag, and a highly resistive ceramic oxide is formed in a "belt" shape at the Ag/Si interface. This resistive belt with a thickness of ~1 um blocks the current conduction from cell emitter to the Ag grid. Our results demonstrate an example of the multi-scale characterization approach for understanding degradation mechanisms in photovoltaics.

c-Si solar cell↗

CoSi{sub x} contact resistance after etching and ashing plasma exposure

The authors investigated the contact resistance fluctuation caused by CoSi{sub x} damage in plasma etching and ashing processes. They found that CoSi{sub x} layers damaged by plasma process exposure are readily oxidized when exposed to air resulting in increased resistance. They also found that the contact resistance increases more when CH{sub 3}F is used instead of CF{sub 4} during etching process. The lower the mass number of dominant ions becomes, the deeper the ions penetrate. Molecular dynamics simulation revealed that dissociated species from lighter ions penetrate deeper and that this stimulates deeper oxidation. They also found that contact resistance further increased by using postetch ashing plasma even in an H{sub 2}/N{sub 2} ashing process in which O{sub 2} was not used. Here, too, the reason for this is that the ion penetration causes deep oxidation. They observed that the contact resistance has a linear relationship with the oxide concentration in CoSi{sub x}. This leads to the conclusion that it is essential to precisely control the ion energy as well as to properly select the ion species in the plasma process in the fabrication of next-generation semiconductor devices.

36 MATERIALS SCIENCE↗

UV Ozone Treatment for Improving Contact Resistance on Graphene

Optimized UV ozone cleaning of graphene layers on SiO2/Si substrates is shown to improve contact resistance of e-beam evaporated Ti/Au contacts by three orders of magnitude (3x10-6 -cm2) compared to untreated surfaces (4x10-3 -cm2). Subsequent annealing at 300 C lowers the minimum value achieved to 7x10-7 -cm2. Ozone exposure beyond an optimum time (6 mins in these experiments) led to a sharp increase in sheet resistance of the graphene, producing degraded contact resistance. The UV ozone treatment is a simple and effective method for producing high quality contacts to graphene.

Chen, Chung Wei↗

Atomic layer etching removal of damaged layers in a contact hole for low sheet resistance

A damaged layer remains on silicon substrates after high-aspect-ratio contact (HARC) etching when using a fluorocarbon gas. Atomic layer etching (ALET) is a technique that can be applied to remove the damaged layer of silicon, removing about 1.36 Å per etch cycle. The characteristics of contact damage removal by ALET are investigated and compared with the conventional damage removal technique of low-power CF{sub 4} plasma etching. The low-power CF{sub 4} plasma etching technique not only has inadequate etch depth control, but also introduces secondary damage by implanting impurities about 25 Å into the contact bottom of the silicon surface. However, ALET allows contact damage to be removed effectively without introducing secondary damage to the substrate, and with precision etch depth control at the angstrom scale. When ALET is applied subsequent to low-power CF{sub 4} plasma etching, the fluorine- and carbon-damaged silicon is effectively removed in about 10 cycles. The sheet resistance of HARC etched silicon decreases from 142 to 137 Ω/□ after using low-power CF{sub 4} plasma etching, and subsequent ALET treatment further decreases the sheet resistance to 129 Ω/□, which is close to the reference value of 124 Ω/□.

36 MATERIALS SCIENCE↗

Damaged silicon contact layer removal using atomic layer etching for deep-nanoscale semiconductor devices

Silicon atomic layer etching (ALET) using Cl{sub 2} is applied to remove the damaged layer on a 30 nm contact silicon surface formed by high-energy reactive ions during high aspect ratio contact etching, and its effects on the damage removal characteristics are investigated. Compared to a conventional damage removal method, such as the low-power CF{sub 4} plasma treatment technique, ALET produces less secondary damage to the substrate and gives exact etch depth control and extremely high etch selectivity to the contact SiO{sub 2} insulating pattern mold. When ALET is applied after a conventional damage removal technique, the sheet resistance of the damaged contact silicon surface is improved to a level close to that of a clean silicon surface, while exact atomic-scale depth control is maintained without changes in the pattern mold profile.

36 MATERIALS SCIENCE↗