Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Vertical van der Waals heterojunction diodes comprising 2D semiconductors on 3D β-Ga 2 O 3

Wide bandgap semiconductors such as gallium oxide (Ga 2 O 3 ) have attracted much attention for their use in next-generation high-power electronics. Although single-crystal Ga 2 O 3 substrates can be routinely grown from melt along various orientations, the influence of such orientations has been seldom reported. Further, making rectifying p–n diodes from Ga 2 O 3 has been difficult due to lack of p-type doping. In this study, we fabricated and optimized 2D/3D vertical diodes on β-Ga 2 O 3 by varying the following three factors: substrate planar orientation, choice of 2D material and metal contacts. Furthermore, the quality of our devices was validated using high-temperature dependent measurements, atomic-force microscopy (AFM) techniques and technology computer-aided design (TCAD) simulations. Our findings suggest that 2D/3D β-Ga 2 O 3 vertical heterojunctions are optimized by substrate planar orientation (–201), combined with 2D WS 2 exfoliated layers and Ti contacts, and show record rectification ratios (>10 6 ) concurrently with ON-Current density (>10 3 A cm –2 ) for application in power rectifiers.

36 MATERIALS SCIENCE↗

Approximation of the maximum frequency of operation for point‐contact MIM diodes from DC current against voltage measurements

Point‐contact metal–insulator–metal (MIM) diodes have been used for detection and mixing at frequencies as high as 520 THz. In detection, the current responsivity (CR), defined as the change in the DC current caused by an incremental change in the high‐frequency input power, depends on the dimensions of the diode and the test fixture. However, other researchers have shown that the intrinsic current responsivity (ICR) which sets an upper bound for the CR may be determined from DC current against voltage measurements. Additional calculations from DC measurements have been used to determine an upper bound for the maximum frequency of operation.

Snyder, G.↗

High voltage and high current density vertical GaN power diodes

We report on the realization of a GaN high voltage vertical p-n diode operating at > 3.9 kV breakdown with a specific on-resistance < 0.9 mΩ.cm 2 . Diodes achieved a forward current of 1 A for on-wafer, DC measurements, corresponding to a current density > 1.4 kA/cm 2 . An effective critical electric field of 3.9 MV/cm was estimated for the devices from analysis of the forward and reverse current-voltage characteristics. Furthermore this suggests that the fundamental limit to the GaN critical electric field is significantly greater than previously believed.

30 DIRECT ENERGY CONVERSION↗

Nanomanufacturability Of Thin Film MIM Diodes

Ni/NiO/Cr MIM diodes with various structures namely, stacked, stepped self aligned, stepped manual aligned and stepped spacer, were fabricated. Their dc electrical responses were analyzed to identify the effects of diode design on asymmetry and emission current. It was found that the stepped structure with an oxide spacer prevented shorting at the step thus circumventing premature breakdown as exhibited by the other structures. These structures demonstrated better asymmetry and a high enough emission current alleviating the issues caused by the other structures. It was also observed that the current density of the self aligned stepped structure showed less variance across devices than the stepped spacer structure. On the other hand, the resistance of the same structure showed to be more ohmic in nature when compared to the stepped structure with spacer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Secondary ions mass spectroscopy measurements of dopant impurities in highly stressed InGaN laser diodes

We performed a systematic secondary ions mass spectroscopy (SIMS) study of dopant impurities in life-time stressed InGaN laser devices in order to investigate the main degradation mechanism that is observed in nitride laser diodes. A continuous wave (cw) current density of 3 kA/cm{sup 2} was applied to InGaN laser diodes over an extended period of time and we observed the characteristic square root degradation of optical power. We compared the SIMS profiles of Mg, H, and Si impurities in the aged devices and observe that the impurities are remarkably stable over 10 000 h of cw operation. Nor is there any SIMS evidence of p-contact metals penetrating into the semiconductor material. Thus our SIMS results are contrary to what one would expect for impurity diffusion causing the observed square root degradation characteristic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Non-Ideal p-n junction Diode of Sb{sub x}Se{sub 1-x}(x = 0.4, 0.5, 0.6, 0.7) Thin Films

We have made diodes consisting of the same alloy i.e. Sb{sub x}Se{sub 1-x}(x = 0.4, 0.5, 0.6 and 0.7), but change the concentration of Sb metal from 40% to 70% atomic weight percentage. It is observed from the Hall measurements that the nature of charge carriers have changed from p- to n-type at x = 0.6 for Sb{sub x}Se{sub 1-x}. We have measured I-V characteristics of four p-n junction diodes i.e. p-Sb{sub 2}Se{sub 3}/n-Sb{sub 3}Se{sub 2}, p-Sb{sub 2}Se{sub 3}/n-Sb{sub 7}Se{sub 3}, p-SbSe/n-Sb{sub 3}Se{sub 2}, p-SbSe/n-Sb{sub 7}Se{sub 3}. From the I-V plots we have calculated the parameters as built-in voltage (V{sub bi}), forward resistance (R{sub f}), ideal factor (n), saturation current (I{sub o}), breakdown current (I{sub Bd}) and breakdown voltage (V{sub Bd}).

36 MATERIALS SCIENCE↗

A digital optical phase-locked loop for diode lasers based on field programmable gate array

We have designed and implemented a highly digital optical phase-locked loop (OPLL) for diode lasers in atom interferometry. The three parts of controlling circuit in this OPLL, including phase and frequency detector (PFD), loop filter and proportional integral derivative (PID) controller, are implemented in a single field programmable gate array chip. A structure type compatible with the model MAX9382/MCH12140 is chosen for PFD and pipeline and parallelism technology have been adapted in PID controller. Especially, high speed clock and twisted ring counter have been integrated in the most crucial part, the loop filter. This OPLL has the narrow beat note line width below 1 Hz, residual mean-square phase error of 0.14 rad{sup 2} and transition time of 100 {mu}s under 10 MHz frequency step. A main innovation of this design is the completely digitalization of the whole controlling circuit in OPLL for diode lasers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

In situ growth of p and n-type graphene thin films and diodes by pulsed laser deposition

We report the in situ growth of p and n-type graphene thin films by ultraviolet pulsed laser deposition in the presence of argon and nitrogen, respectively. Electron microscopy and Raman studies confirmed the growth, while temperature dependent electrical conductivity and Seebeck coefficient studies confirmed the polarity type of graphene films. Nitrogen doping at different sites of the honeycomb structure, responsible for n-type conduction, is identified using X-ray photoelectron spectroscopy, for films grown in nitrogen. A diode-like rectifying behavior is exhibited by p-n junction diodes fabricated using the graphene films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Phase-change radiative thermal diode

A thermal diode transports heat mainly in one preferential direction rather than in the opposite direction. This behavior is generally due to the non-linear dependence of certain physical properties with respect to the temperature. Here we introduce a radiative thermal diode which rectifies heat transport thanks to the phase transitions of materials. Rectification coefficients greater than 70% and up to 90% are shown, even for small temperature differences. This result could have important applications in the development of future contactless thermal circuits or in the conception of radiative coatings for thermal management.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advancements in ion diode and triode design

Selfconsistent laminar flow models, which enable to predict the optimal cathode and anode geometry in simple diodes, must be modified to account for the anode aperture and the effect of other electrodes. An equation for charge coupled to arbitrary laminar flows is here first presented and its numerical solutions are obtained with a new method, based on mesh transformations. It is found that a close match to theoretical flows requires an increase of the simple diode voltage v{sub 0} by an amount v{sub δ}, which, for a typical case designed for zero exit angle condition, are v{sub 0} = 0.7465 and v{sub δ} = 0.0294 in adimensional units. States “in” and “out” for the anode lens are also shown, where “out” is a new and nonlinear solution for the beam expansion in a drift tube.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Reconfigurable p-n junction diodes and the photovoltaic effect in exfoliated MoS{sub 2} films

Realizing basic semiconductor devices such as p-n junctions are necessary for developing thin-film and optoelectronic technologies in emerging planar materials such as MoS{sub 2}. In this work, electrostatic doping by buried gates is used to study the electronic and optoelectronic properties of p-n junctions in exfoliated MoS{sub 2} flakes. Creating a controllable doping gradient across the device leads to the observation of the photovoltaic effect in monolayer and bilayer MoS{sub 2} flakes. For thicker flakes, strong ambipolar conduction enables realization of fully reconfigurable p-n junction diodes with rectifying current-voltage characteristics, and diode ideality factors as low as 1.6. The spectral response of the photovoltaic effect shows signatures of the predicted band gap transitions. For the first excitonic transition, a shift of >4{sub kB}T is observed between monolayer and bulk devices, indicating a thickness-dependence of the excitonic coulomb interaction.

14 SOLAR ENERGY↗

Exciton-dominant electroluminescence from a diode of monolayer MoS{sub 2}

In two-dimensional monolayer MoS{sub 2}, excitons dominate the absorption and emission properties. However, the low electroluminescent efficiency and signal-to-noise ratio limit our understanding of the excitonic behavior of electroluminescence. Here, we study the microscopic origin of the electroluminescence from a diode of monolayer MoS{sub 2} fabricated on a heavily p-type doped silicon substrate. Direct and bound-exciton related recombination processes are identified from the electroluminescence. At a high electron-hole pair injection rate, Auger recombination of the exciton-exciton annihilation of the bound exciton emission is observed at room temperature. Moreover, the efficient electrical injection demonstrated here allows for the observation of a higher energy exciton peak of 2.255 eV in the monolayer MoS{sub 2} diode, attributed to the excited exciton state of a direct-exciton transition.

36 MATERIALS SCIENCE↗

Correlation between measured voltage and observed wavelength in commercial AlGaInP laser diode

Temperature of a commercial AlGaInP/GaInP quantum well laser diode (LD) is measured using two methods: peak wavelength shift and the diode voltage drop caused by working current. Time evolutions of temperature obtained by the two methods during the LD self-heating are measured and compared. No significant difference between the thus obtained temperature evolutions is obtained. Correlation between the LD voltage drop and the laser radiation frequency is established using a simple four-level semiconductor laser scheme and the LD gap energy is estimated. The LD gap energy decreases from 1.66 eV to 1.56 eV for temperature increase of 21 K, at close to room temperature. It is found that LD's frequency decrease is caused by the gap energy decrease.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of plasma expansion dynamics in a high power diode with a carbon-fiber-aluminum cathode

Thermal plasma expansion is characterised during the operation of a high power diode with an explosive emission carbon-fiber-aluminum cathode driven by a 250 kV, 150 ns accelerating pulse. It is found that a quasi-stationary state of plasma expansion is obtained during the main part of the accelerating pulse and the whole plasma expansion exhibits an “U”-shape velocity evolution. A theoretical model describing the dynamics of plasma expansion is developed, which indicates that the plasma expansion velocity is determined by equilibrium between the diode current density and plasma thermal electron current density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of deposition temperature on electron-beam evaporated polycrystalline silicon thin-film and crystallized by diode laser

The effects of the deposition temperature on the microstructure, crystallographic orientation, and electrical properties of a 10-μm thick evaporated Si thin-film deposited on glass and crystallized using a diode laser, are investigated. The crystallization of the Si thin-film is initiated at a deposition temperature between 450 and 550 °C, and the predominant (110) orientation in the normal direction is found. Pole figure maps confirm that all films have a fiber texture and that it becomes stronger with increasing deposition temperature. Diode laser crystallization is performed, resulting in the formation of lateral grains along the laser scan direction. The laser power required to form lateral grains is higher in case of films deposited below 450 °C for all scan speeds. Pole figure maps show 75% occupancies of the (110) orientation in the normal direction when the laser crystallized film is deposited above 550 °C. A higher density of grain boundaries is obtained when the laser crystallized film is deposited below 450 °C, which limits the solar cell performance by n = 2 recombination, and a performance degradation is expected due to severe shunting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable spectral response by hydrogen irradiation of Ga(AsN) superlattice diodes

We report on the tuning of the spectral response of superlattice (SL) diodes based on dilute nitride Ga(AsN) alloys by post-growth hydrogenation. Hydrogen is incorporated into the superlattice where it neutralizes the electronic activity of nitrogen by forming N-H complexes. We exploit the controlled thermal dissociation of the complexes to tune the energy of the SL photocurrent absorption and electroluminescence emission; also, by annealing a submicron spot with a focused laser beam we create a preferential path for the injection of carriers, thus activating a nanoscale light emitting region. This method can be used for fabricating planar diode arrays with distinct optical active regions, all integrated onto a single substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Robust random number generation using steady-state emission of gain-switched laser diodes

We demonstrate robust, high-speed random number generation using interference of the steady-state emission of guaranteed random phases, obtained through gain-switching a semiconductor laser diode. Steady-state emission tolerates large temporal pulse misalignments and therefore significantly improves the interference quality. Using an 8-bit digitizer followed by a finite-impulse-response unbiasing algorithm, we achieve random number generation rates of 8 and 20 Gb/s, for laser repetition rates of 1 and 2.5 GHz, respectively, with a ±20% tolerance in the interferometer differential delay. We also report a generation rate of 80 Gb/s using partially phase-correlated short pulses. In relation to the field of quantum key distribution, our results confirm the gain-switched laser diode as a suitable light source, capable of providing phase-randomized coherent pulses at a clock rate of up to 2.5 GHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗