Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Interfacial Microstructural Evolution and Metallurgical Bonding Mechanisms for IN718 Superalloy Joint Produced by Hot Compressive Bonding

The novel metallurgical joining process for bonding IN718 superalloy was investigated by hot compressive bonding (HCB) process under the deformation temperature range of 1000 °C to 1150 °C and true strains ranging from 0 to 0.5 at a strain rate of 0.001 s{sup −1}. The effect of HCB process parameters on the tensile strength was analyzed. Both the as-deformed and the interfacial microstructures were characterized using the optical microscope, electron backscattered diffraction and transmission electron microscope (TEM) analysis. The results of tensile property revealed that the degree of metallurgical bonding is promoted by increasing deformation temperature and strain. The evolution of the interfacial microstructure showed that the migration of interfacial grain boundary (IGB), which is characterized by discontinuous dynamic recrystallization, is the dominant metallurgical bonding mechanism in the early stages of bonding. TEM analysis indicated that the dislocation density is distributed heterogeneously over both sides of IGB, which is the significant reason for the migration of IGB, during the initial stage of HCB process.

36 MATERIALS SCIENCE↗

Process-Structure-Property Relations for As-Deposited Solid-State Additively Manufactured High-Strength Aluminum Alloy

Solid-state additive manufacturing methods provide innovative solutions to circumvent problems associated with materials susceptible to hot cracking by avoiding liquid solid phase transformations. In this work, the process parameter influence on microstructural evolution and mechanical response of a fully dense aluminum alloy 7050 (AA7050) component manufactured via a rapid, solid-state additive manufacturing process known as Additive Friction Stir Deposition (AFS-D) was quantified for the first time. Three sections (starting dwell, transient, crossover of roads) of the deposition that exhibit differing thermomechanical processing histories were evaluated for the resulting microstructure and mechanical response. The microstructural characterization was performed on the as-deposited AA7050 via Electron Backscatter Diffraction (EBSD), TEM, optical microscopy, and Scanning Electron Microscopy (SEM). The microstructural characterization revealed refined constituent particles and grains throughout the as-deposited AA7050 microstructure. Furthermore, quasi-static tensile experiments were conducted in both the build and transverse directions, in order to quantify the orientation influence on tensile properties of the as-deposited AA7050 build. Spatially dependent tensile properties were observed in the material due to heat input variation coarsening of secondary phases towards the initial layers of the AFS-D build. Post-mortem analysis revealed that voids nucleated and coalesced from the overgrowth of the strengthening precipitates present in the material, resulting in fracture.

36 MATERIALS SCIENCE↗

Characterization of PVD Cr, CrN, and TiN coatings on SiC

SiC ceramic matrix composites are a potential replacement for current light water nuclear reactor fuel cladding material. However, loss of fission gas via micro-cracks and corrosion remain an issue. Cathodic arc Cr, CrN, and TiN coatings were deposited on SiC tubes and plates to provide hermeticity and corrosion resistance. These coatings were characterized to determine as-deposited quality. Cross-sectional microscopy, X-ray diffraction, glow discharge optical emission spectroscopy, and scratch tests were performed to evaluate the purity, structure, and mechanical performance of the coatings. Nitride coatings had stable interfaces, but larger defects in the coatings as compared to the Cr coatings which showed cracking at the interface, but less deposition-induced defects. Despite the local state of the interface, the mechanical properties of the metallic coatings versus ceramic coatings enabled the Cr coatings to resist loads three times that of the nitride coatings during scratch tests. Finally, glow-discharge optical emission spectroscopy showed that improvement in elemental purity is needed for future coatings.

36 MATERIALS SCIENCE↗

Local composition and carrier concentration in Pb0.7Ge0.3Te and Pb0.5Ge0.5Te alloys from 125Te NMR and microscopy

Pb0.7Ge0.3Te and Pb0.5Ge0.5Te alloys, (i) quenched from 923 K or (ii) quenched and annealed at 573 K for 2 h, have been studied by 125Te NMR, X-ray diffraction, electron and optical microscopy, as well as energy dispersive spectroscopy. Depending on the composition and thermal treatment history, 125Te NMR spectra exhibit different resonance frequencies and spin-lattice relaxation times, which can be assigned to different phases in the alloy. Quenched and annealed Pb0.7Ge0.3Te alloys can be considered as solid solutions but are shown by NMR to have components with various carrier concentrations. Quenched and annealed Pb0.5Ge0.5Te alloys contain GeTe- and PbTe-based phases with different compositions and charge carrier concentrations. Based on the analysis of non-exponential 125Te NMR spin-lattice relaxation, the fractions and carrier concentrations of the various phases have been estimated. Our data show that alloying of PbTe with Ge results in the formation of chemically and electronically inhomogeneous systems. 125Te NMR can be used as an efficient probe to detect the local composition in equilibrium as well as non-equilibrium states, and to determine the local carrier concentrations in complex multiphase tellurides.

36 MATERIALS SCIENCE↗

Blue and red up-conversion light emission in TM-doped A 2 B 2 O 7 oxides

The crystal structure and light emission property of Yb/Tm doped gadolinium titanate and gadolinium zirconate with chemical composition of A 2 B 2 O 7 were studied by x-ray diffraction (XRD) and optical spectroscopy measurements, respectively. XRD results suggest that the rare earth titanates have an ordered pyrochlore structure and a defect-fluorite structure for the zirconates. Photoluminescence activated with 1064 nm infrared laser light shows different light emission behaviors for the titanate and zirconate samples, which is related to the different site occupancy of Tm 3+ in the lattice of the samples. Only a weak near-infrared (NIR) (~800 nm) light emission was observed in the titanate samples while a strong blue and red up-conversion emission was detected in the Tm 3+ -doped zirconate samples. As a result, the strong blue and red emission is due to the 7-fold coordinated Tm 3+ in the structure.

36 MATERIALS SCIENCE↗

Magnetic and thermal behavior of a family of compositionally related zero-dimensional fluorides

The mild hydrothermal crystal growth technique has been leveraged to synthesize four new zero-dimensional transition metal fluorides. Their structures were determined by single crystal X-ray diffraction and confirmed by powder X-ray diffraction. The thermal, optical, and magnetic properties were investigated and the presence of thermal polymorphism and antiferromagnetism were observed. In addition, the potential application of these materials as precursors for advanced functional materials was explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling Solvate Intermediate Growth for Phase-Pure Organic Lead Iodide Ruddlesden–Popper (C 4 H 9 NH 3 ) 2 (CH 3 NH 3 ) n -1 Pb n I 3 n +1 Perovskite Thin Films

The growth of Ruddlesden-Popper perovskite thin films is complicated by the existence of multiple crystallization pathways available to precursors in solution. During conventional thin film growth processes, such as spin-coating or blade-coating, solvents can evaporate too quickly to clearly resolve different reaction intermediates and products that form during crystallization. Here, we resolve multiple reaction products and intermediates that form during Ruddlesden-Popper phase growth by studying drop-cast precursor solutions in situ through the evolution of X-ray diffraction, photoluminescence, and optical micrographs over long timescales in a thin film geometry. We found that methylammonium-rich solvate intermediates play a crucial role in directing the bulk optical properties of the films, and form simultaneously with smaller regions of Ruddlesden-Popper phases during growth. The microstructure and optical properties of these sub-phases were characterized during growth and after annealing, revealing that discrepancies between thin film and single-crystal optical properties originate from solvate intermediates. These lower band-gap solvate-mediated minority phases dominate the optical emission spectrum by means of rapid energy migration, and contribute to sub-band-gap electronic states in photovoltaic devices. Processing routes to yield thin films with optical properties similar to single crystals of Ruddlesden-Popper phases were developed by tuning the precursor stoichiometry and deposition kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-shot magnon interference in a magnon-superconducting-resonator hybrid circuit

Magnon interference is a hallmark of coherent magnon interactions. In this work, we demonstrate single-shot magnon interference using up to four magnon pulses in two remotely coupled yttrium iron garnet spheres mediated by a coplanar superconducting resonator. By exciting one YIG sphere with injected microwave pulses, we achieve coherent energy exchange between the two spheres, facilitating their interference processes, including Rabi-like oscillation with a single pulse, constructive and destructive interference with two pulses, and interference peak sharpening with up to four pulses—analogous to diffraction grating in optical interference. The resulting interference patterns can be precisely controlled by changing the frequency detuning and time delay of the magnon pulses. The demonstration of time-domain coherent control of remote magnon interference opens new pathways for advancing coherent information processing through multi-operation, circuit-integrated hybrid magnonic networks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoinduced twist and untwist of moiré superlattices

This paper directly observes femtosecond photoinduced twist–untwist motion of WSe₂/MoSe₂ moiré superlattices using ultrafast electron diffraction, showing that optical excitation can dynamically reconfigure moiré lattice structure and interlayer coupling. It supports the proposal by establishing the team’s ability to probe ultrafast interfacial and moiré dynamics, which is relevant to using moiré TMDs as reconfigurable platforms for controlling spin, charge, and molecular interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Determination of the transient electron temperature in a femtosecond-laser-induced air plasma filament

The transient electron temperature in a weakly ionized femtosecond-laser-produced air plasma filament was determined from optical absorption and diffraction experiments. The electron temperature and plasma density decay on similar time scales of a few hundred picoseconds. Comparison with plasma theory reveals the importance of inelastic collisions that lead to energy transfer to vibrational degrees of freedom of air molecules during the plasma cooling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nucleation and crystal growth behavior of nepheline in simulated high-level waste glasses

The Savannah River National Laboratory (SRNL) has been tasked with supporting glass formulation development and process control strategies in key technical areas, relevant to the Department of Energy’s Office of River Protection (DOE-ORP) and related to high-level waste (HLW) vitrification at the Waste Treatment and Immobilization Plant (WTP). Of specific interest is the development of predictive models for crystallization of nepheline (NaAlSiO4) in HLW glasses formulated at high alumina concentrations. This report summarizes recent progress by researchers at SRNL towards developing a predicative tool for quantifying nepheline crystallization in HLW glass canisters using laboratory experiments. In this work, differential scanning calorimetry (DSC) was used to obtain the temperature regions over which nucleation and growth of nepheline occur in three simulated HLW glasses - two glasses representative of WTP projections and one glass representative of the Defense Waste Processing Facility (DWPF) product. The DWPF glass, which has been studied previously, was chosen as a reference composition and for comparison purposes. Complementary quantitative X-ray diffraction (XRD) and optical microscopy confirmed the validity of the methodology to determine nucleation and growth behavior as a function of temperature. The nepheline crystallization growth region was determined to generally extend from ~ 500 to >850 °C, with the maximum growth rates occurring between 600 and 700 °C. For select WTP glass compositions (high Al2O3 and B2O3), the nucleation range extended from ~ 450 to 600 °C, with the maximum nucleation rates occurring at ~ 530 °C. For the DWPF glass composition, the nucleation range extended from ~ 450 to 750 °C with the maximum nucleation rate occurring at ~ 640 °C. The nepheline growth at the peak temperature, as determined by XRD, was between 35 - 75 wt.% /hour. A maximum nepheline growth rate of ~ 0.1 mm/hour at 700 °C was measured for the DWPF composition using optical microscopy. This research establishes a viable alternative to more traditional techniques for evaluating nepheline crystallization in large numbers of glasses, which are prohibitively time consuming or otherwise impractical. The ultimate objective is to combine the nucleation and growth information obtained from DSC, like that presented in this report, with computer simulations of glass cooling within the canister to accurately predict nepheline crystallization in HLW during processing through WTP.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Research study to determine critical optical/mechanical properties of materials considered for selection as substrates for the primary mirror on a large telescope

An investigation was conducted to evaluate the stability of a specific low expansion glass-ceramic material relative to its use as a large, lightweight mirror substrate for diffraction-limited spaceborne optical applications. These evaluations were made on a segment (0.44 meter diameter by 0.31 meter thick) of a 2 to 3 meter diameter mirror blank. The dimensional stability of this mirror was measured interferometrically before and after lightweighting, as a function of rough machining, etching, thermal environment, and support configuration. A special computer analysis program was used to plot the coefficients corresponding to aberrations with sixfold symmetry (caused by the mirror's self-weight deflection on a three point support). The objective was to enhance the test sensitivity. Results indicate that any such effects due to self-weight deflection are of the order of 0.015 lambda rms. The rms and peak-to-peak figure changes associated with each processing operation are summarized.

Slomba, A. F.↗

Analysis of ablation debris from natural and artificial iron meteorites

Artificial ablation studies were performed on iron and nickel-iron samples using an arc-heated plasma of ionized air. Experiment conditions simulated a meteoroid traveling about 12 km/sec at an altitude of 70 km. The artificially produced fusion crusts and ablation debris show features very similar to natural fusion crusts of the iron meteorites Boguslavka, Norfork, and N'Kandhla and to magnetic spherules recovered from Mn nodules. X-ray diffraction, electron microprobe, optical, and scanning electron microscope analyses reveal that important mineralogical, elemental, and textural changes occur during ablation. Some metal is melted and ablated. The outer margin of the melted rind is oxidized and recrystallizes as a discontinuous crust of magnetite and wustite. Adjacent to the oxidized metallic ablation zone is an unoxidized metallic ablation zone in which structures such as Widmannstatten bands are obliterated as the metal is transformed to unequilibrated alpha 2 nickel-iron. Volatile elements are vaporized and less volatile elements undergo fractionation.

Blanchard, M. B.↗

Lodestone-explanation for magnetic properties and characterization of the source of magnetic hardening

The microstructure of Class I lodestones was investigated by X-ray diffraction and by optical and transmission electron microscopy, and the behavior of lodestone magnetization was studied at temperatures of 4 to 825 K. It was found that intense magnetization is associated with the gamma Fe2O3-Fe3O4 intergrowth. Thermal demagnetization of the lodestone studied was nearly complete at 300 C. The loss of natural remanence was found to be associated with transformation of gamma Fe2O3 to alpha Fe2O3.

Wasilewski, P. J.↗

Design and analysis of a Schwarzschild imaging multilayer X-ray microscope

Several Schwarzschild X-ray microscope optics were designed. Diffraction analysis indicates that better than 600 A spatial resolution in the object plane up to a 0.7 mm field of view can be achieved with 100 A radiation. Currently, a 20 x normal incidence multilayer X-ray microscope of 1.35 m overall length is being fabricated. Other microscope systems for use in conjunction with X-ray telescopes were also analyzed and designed. This paper reports on the results of these studies and the X-ray microscope fabrication effort.

Shealy, David L.↗