Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Development of an x-ray diffraction camera used in magnetic fields up to 10 T

A high-field x-ray diffraction (HF-XRD) camera was developed to observe structural changes of magnetic materials in magnetic fields up to 10 T. The instrument mainly consists of a Debye-Scherrer-type camera with a diameter of 80.1 mm, a 10-T cryocooled superconducting magnet with a 100-mm room-temperature bore, an x-ray source, a power supply, and a chiller for the x-ray source. An x-ray detector (image plate) in the HF-XRD camera can be taken out and inserted into the magnet without changing the sample position. The performance of the instrument was tested by measuring the HF-XRD for silicon and ferromagnetic MnBi powders. A change of x-ray diffraction pattern was observed due to the magnetic orientation of MnBi, showing that the instrument is useful for studying field-induced orientation processes and structural properties of field-controlled materials.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

2D and 3D X-Ray Structural Microscopy Using Submicron-Resolution Laue Microdiffraction

We have developed a scanning, polychromatic x-ray microscopy technique with submicron spatial resolution at the Advanced Photon Source. In this technique, white undulator radiation is focused to submicron diameter using elliptical mirrors. Laue diffraction patterns scattered from the sample are collected with an area detector and then analyzed to obtain the local crystal structure, lattice orientation, and strain tensor. These new microdiffraction capabilities have enabled both 2D and 3D structural studies of materials on mesoscopic length-scales of tenths-to-hundreds of microns. For thin samples such as deposited films, 2D structural maps are obtained by step-scanning the area of interest. For example, 2D x-ray microscopy has been applied in studies of the epitaxial growth of oxide films. For bulk samples, a 3D differential-aperture x-ray microscopy technique has been developed that yields the full diffraction information from each submicron volume element. The capabilities of 3D x-ray microscopy are demonstrated here with measurements of grain orientations and grain boundary motion in polycrystalline aluminum during 3D thermal grain growth. X-ray microscopy provides the needed, direct link between the experimentally measured 3D microstructural evolution and the results of theory and modeling of materials processes on mesoscopic length scales.

36 MATERIALS SCIENCE↗

Effect of Bainitic Microstructure on Ballistic Performance of Armour Steel Weld Metal Using Developed High Ni-Coated Electrode

Welding of armour steel has gained significant importance during the past few years as recent civilian and military requirements demand weld metal properties matching with base metal having good ballistic performance along with high strength and toughness at − 40 °C as per specification. The challenge of armour steel welding therefore lies in controlling the weld metal composition which is strongly dependent on welding electrode/consumables, resulting in desired weld microstructure consisting of lower bainite along with retained austenite. The performance of butt-welded armour steel joints produced by the developed electrodes was evaluated using tensile testing, ballistic testing, impact toughness at room temperature and subzero temperature. Microstructures of weld metals are exclusively characterized by x-ray diffraction technique, scanning electron microscope and transmission electron microscopy with selected area diffraction pattern. Experimental results show that weld metal with relatively lower carbon, higher manganese and lower nickel content was attributed to lower bainite with film type of retained austenite may be considered as a most covetable microstructure for armour steel weld metal.

36 MATERIALS SCIENCE↗

From random stacking faults to polytypes: A 12-layer NiSn 4 polytype

NiSn 4 grows in diffusion couples (Ni plates with electrodeposited Sn) in a temperature range from room temperature up to 353 K. Previously, the crystal structure of NiSn 4 grown at ambient temperature was identified to be an intermediate stacking variant between the orthorhombic PtSn 4 -type and the tetragonal β-IrSn 4 -type structure, with a slight tendency towards the tetragonal type. Now it is reported that NiSn 4 forming at 333 K and above, exhibits a 12-layer polytype (space group P4 2 /nbc, a = b = 6.250 Å, c = 69.00 Å) due to ordered incorporation of stacking faults into the structure. Here, this NiSn 4 structure was derived by comparison of its diffraction patterns with those of the exhaustively generated NiSn 4 polytypes. First-principles calculations on a series of selected NiSn 4 polytypes demonstrate that the experimentally observed polytype is energetically favoured as compared to others.

36 MATERIALS SCIENCE↗

Synthesis, Crystal Structures and Properties of the Zintl Phases Sr2ZnP2, Sr2ZnAs2, A2ZnSb2 and A2ZnBi2 (A = Sr and Eu)

The new intermetallic compounds Sr2ZnP2, Sr2 ZnAs2, A2ZnSb2 and A2ZnBi2 (A = Sr, Eu) have been synthesized from the corresponding elements through high-temperature reactions using the flux-growth method. Their structures have been established by singlecrystal and powder X-ray diffraction. In all cases, the X-ray diffraction patterns can be successfully indexed based on hexagonal cells in the space group P63/mmc (no. 194) with lattice parameters in the range a = 4.31 4.73 and c = 7.9 8.55 . The average structure can be described in the ZrBeSi type (Pearson symbol hP6; 3 unique positions) with defects on the zinc site structure refinements indicate that every second zinc position is vacant, i.e., their formula unit is AZn1 xPn with x = 0.5 (A = Sr, Eu; Pn = P, As, Sb, Bi). No stoichiometry breadth was observed, which could imply that a super-structure with a long-range order of the zinc vacancies is plausible and evidence for such was sought using electron diffraction. The results from these experiments, as well as magnetic susceptibility measurements and band structure calculations using the LMTO code are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A fixed-target platform for serial femtosecond crystallography in a hydrated environment

For serial femtosecond crystallography at X-ray free-electron lasers, which entails collection of single-pulse diffraction patterns from a constantly refreshed supply of microcrystalline sample, delivery of the sample into the X-ray beam path while maintaining low background remains a technical challenge for some experiments, especially where this methodology is applied to relatively low-ordered samples or those difficult to purify and crystallize in large quantities. This work demonstrates a scheme to encapsulate biological samples using polymer thin films and graphene to maintain sample hydration in vacuum conditions. The encapsulated sample is delivered into the X-ray beam on fixed targets for rapid scanning using the Roadrunner fixed-target system towards a long-term goal of low-background measurements on weakly diffracting samples. As a proof of principle, we used microcrystals of the 24 kDa rapid encystment protein (REP24) to provide a benchmark for polymer/graphene sandwich performance. The REP24 microcrystal unit cell obtained from our sandwiched in-vacuum sample was consistent with previously established unit-cell parameters and with those measured by us without encapsulation in humidified helium, indicating that the platform is robust against evaporative losses. While significant scattering from water was observed because of the sample-deposition method, the polymer/graphene sandwich itself was shown to contribute minimally to background scattering.

36 MATERIALS SCIENCE↗

Graphitization Behavior of Loblolly Pine Wood Investigated by in Situ High Temperature X-ray Diffraction

Graphitization is a complex process involving chemical and morphological changes, although the detailed mechanism for different starting materials is not well understood. In this work, in situ high temperature X-ray diffraction (XRD) and differential scanning calorimetry (DSC) were used to examine the phase transition occurring between 1000 and 1500 °C in loblolly pine wood-derived carbon materials. Electron energy loss spectroscopy (EELS) was also used to study these wood-derived carbon materials. XRD data showed the disappearance of a disordered carbon phase between 1300 and 1400 °C, followed by the formation of a crystalline graphitic phase between 1400 and 1500 °C. Here, lattice parameters and the crystal structure of the loblolly pine wood-derived graphite were systematically calculated from the empirical data. The presence of a large endothermic peak at 1500 °C in the DSC thermogram supported this observation. Selected area electron diffraction patterns showed the growth of graphitic crystallites after heat treatment. EELS spectra also supported the presence of a well-developed graphite structure.

Anode materials↗

Pressure-Induced Phase Transition in N-H···O Hydrogen-Bonded Molecular Crystal Oxamide

The effect of high pressure on the structural stability of oxamide has been investigated in a diamond anvil cell by Raman spectroscopy up to ~14.6 GPa and by angle-dispersive X-ray diffraction (ADXRD) up to ~17.5 GPa. The discontinuity in Raman shifts around 9.6 GPa indicates a pressure-induced structural phase transition. This phase transition is confirmed by the change of ADXRD spectra with the symmetry transformation from P1⁻ to P1. On total release of pressure, the diffraction pattern returns to its initial state, implying this transition is reversible. We discuss the pressure-induced variations in N-H stretching vibrations and the amide modes in Raman spectra and propose that this phase transition is attributed to the distortions of the hydrogen-bonded networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic properties of Eu doped BiGdO{sub 3}

Bulk Bismuth Gadolinium Oxide, BiGdO{sub 3} and Eu doped BiGdO{sub 3} compounds were synthesized by the conventional solid state reaction in air. Phase formation of these compounds was tracked using powder X-ray characterization technique since single phase formation was found to be sensitive to thermal treatment parameters such as cooling and heating rates. Analysis of X-ray diffraction patterns revealed cubic structure with Pm-3m symmetry. An antiferromagnetic transition around 3.8 K was observed in the pristine compound whereas doped samples showed paramagnetic nature in the whole measured temperature range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of Ohmic contact on semi-insulating 4H-SiC substrate by laser thermal annealing

The Ni contact layer was deposited on semi-insulating 4H-SiC substrate by magnetron sputtering. The as-deposited samples were treated by rapid thermal annealing (RTA) and KrF excimer laser thermal annealing (LTA), respectively. The RTA annealed sample is rectifying while the LTA sample is Ohmic. The specific contact resistance (ρ{sub c}) is 1.97 × 10{sup −3} Ω·cm{sup 2}, which was determined by the circular transmission line model. High resolution transmission electron microscopy morphologies and selected area electron diffraction patterns demonstrate that the 3C-SiC transition zone is formed in the near-interface region of the SiC after the as-deposited sample is treated by LTA, which is responsible for the Ohmic contact formation in the semi-insulating 4H-SiC.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization using thermomechanical and differential thermal analysis of the sinterization of Portland clinker doped with CaF{sub 2}

In this work, the sintering process of Portland cement was studied by combining thermomechanical analysis (TMA) and differential thermal analysis (DTA), together with X-ray diffraction (XRD) and scanning electron microscopy (SEM). Thermal analysis results employing both techniques indicted that phase transformations appeared at lower temperatures when CaF{sub 2} was incorporated in the raw materials. Besides, it was observed at high temperature that in some phase transformations TMA conducts to better resolution compared with the DTA measurements. Furthermore, mechanical properties and X-ray diffraction patterns corroborate the TMA and DTA results, corroborating that the final amount of alite (Ca{sub 3}SiO{sub 5}) is higher when a certain amount of CaF{sub 2} was present during the clinkerization process.

36 MATERIALS SCIENCE↗

Microstructural evolution and grain growth kinetics of GZ31 magnesium alloy

Grain growth behavior of Mg–3Gd–1Zn (GZ31) magnesium alloy was studied in a wide range of annealing time and temperature to clarify the kinetics of grain growth, microstructural evolution and related metallurgical phenomena. This material exhibited typical normal grain growth mode under annealing conditions with annealing temperature of lower than 300 °C and soaking time of lower than 240 min. However, the abnormality in grain growth was also evident at annealing temperature of 400 °C and 500 °C. The dependence of abnormal grain growth (AGG) at mentioned annealing temperatures upon microstructural features such as dispersed precipitates, which were rich in Zn and Gd, was investigated by optical micrographs, X-ray diffraction patterns, scanning electron microscopy images, and energy dispersive X-ray analysis spectra. The bimodality in grain-size distribution histograms also signified the occurrence of AGG. Based on the experimental data on grain growth obtained by annealing treatments, the grain growth exponent and the activation energy were also figured out.

36 MATERIALS SCIENCE↗

A new synthesis of lamellar-mesostructured silica by using poly(ethylene glycol) distearate as template

A lamellar-mesostructured silica has been synthesized by using poly(ethylene glycol) distearate as template in ethanol solution. Highly ordered lamellar mesostructure was confirmed by X-ray diffraction pattern, transmission electronic microscopy, and nitrogen adsorption-desorption isotherm. The material obtained in this work has a large interlayer distance, and good thermal and mechanical stabilities, which can favor the preparation of the in situ polymerized nanocomposites based on intercalation of polymers in the lamellar-mesostructured silica.

36 MATERIALS SCIENCE↗

Magnetic properties and magnetocaloric effect of NdMn{sub 2−x}Cu{sub x}Si{sub 2} compounds

Structural and magnetic properties of NdMn{sub 2−x}Cu{sub x}Si{sub 2} compounds (x = 0–1.0) have been investigated by high intensity x-ray and resolution neutron diffraction (3–450 K), specific heat, dc magnetization, and differential scanning calorimetry measurements. Substitution of Cu for Mn leads to an increase in the lattice parameter a but a decrease in c at room temperature. Two magnetic phase transitions have been found for NdMn{sub 2−x}Cu{sub x}Si{sub 2} compounds with T{sub N} for the antiferromagnetic ordering of Mn-sublatttice and T{sub C} for the Nd-sublattice ferromagnetic ordering, respectively. T{sub C} increases significantly with increasing Cu content from 36 K at x = 0 to 100 K at x = 1.0. Moreover, it is found that the order of magnetic phase transition around T{sub C} also changes from first order at x < 0.6 to second order transition for x ≥ 0.6. The spontaneous magnetization found to decrease with the increase in Cu concentration which can be understood in the term of the dilution effect of Cu for Mn. The values of −ΔS{sub M} around T{sub C} decrease with increasing x from 27 J kg{sup −1} K{sup −1} for x = 0 to 0.5 J kg{sup −1} K{sup −1} for x = 1.0 under 0–5 T field. Refinement of neutron diffraction patterns for x = 0.2 confirms the magnetic states detected by magnetic study and also indicates that the lattice constants a and c show a distinct variation around T{sub C}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of (111)-oriented Ca{sub 0.5}Sr{sub 0.5}IrO{sub 3}/SrTiO{sub 3} superlattices—A designed playground for honeycomb physics

We report the fabrication of (111)-oriented superlattice structures with alternating 2m-layers (m = 1, 2, and 3) of Ca{sub 0.5}Sr{sub 0.5}IrO{sub 3} perovskite and two layers of SrTiO{sub 3} perovskite on SrTiO{sub 3}(111) substrates. In the case of m = 1 bilayer films, the Ir sub-lattice is a buckled honeycomb, where a topological state may be anticipated. The successful growth of superlattice structures on an atomic level along the [111] direction was clearly demonstrated by superlattice reflections in x-ray diffraction patterns and by atomically resolved transmission electron microscope images. The ground states of the superlattice films were found to be magnetic insulators, which may suggest the importance of electron correlations in Ir perovskites in addition to the much discussed topological effects.

36 MATERIALS SCIENCE↗

Analysis strategy for ultrafast X-ray photon correlation spectroscopy

We explain an analysis strategy for ultrafast X-ray photon correlation spectroscopy, a technique enabled by X-ray free electron lasers to probe nano- and atomic-scale dynamics in complex systems on nanosecond timescales or faster. Central to the technique is the methodology for extracting contrast in coherent X-ray diffraction patterns, known as speckle patterns. Guided by simulations, we analyze common challenges and examine errors encountered in contrast extraction. A method for accurately determining contrast amid shot noise across a wide range of count rates is presented.

36 MATERIALS SCIENCE↗

Fabrication and electron transport properties of epitaxial films of electron-doped 12CaO.7Al{sub 2}O{sub 3} and 12SrO.7Al{sub 2}O{sub 3}

Epitaxial growth and electron doping of 12CaO.7Al{sub 2}O{sub 3} (C12A7) and 12SrO.7Al{sub 2}O{sub 3} (S12A7) are reported. The C12A7 films were prepared on Y{sub 3}Al{sub 5}O{sub 12} (YAG) single-crystal substrates by pulsed laser deposition at room temperature and subsequent thermal crystallization. X-ray diffraction patterns revealed the films were grown epitaxially with the orientation relationship of (001)[100] C12A7 || (001)[100] YAG. For S12A7, pseudo-homoepitaxial growth was attained on the C12A7 epitaxial layer. Upon electron doping, metallic conduction was achieved in the C12A7 film and the S12A7/C12A7 double-layered films. Analyses of optical absorption spectra for the S12A7/C12A7 films provided the densities of free electrons in each layer separately. Hall measurements exhibited larger electron mobility in the S12A7/C12A7 film than those in C12A7 and S12A7 films, suggesting free electrons may be accumulated at the S12A7/C12A7 interface due presumably to a discontinuity of the cage conduction bands. - Graphical abstract: Reciprocal space maps around the 408 and the 709 diffractions show the films were grown epitaxially with the orientation relationship of (001)[100] 12SrO.7Al{sub 2}O{sub 3} || (001)[100] 12CaO.7Al{sub 2}O{sub 3} || (001)[100] Y{sub 3}Al{sub 5}O{sub 12}.

36 MATERIALS SCIENCE↗

Single crystalline β-Ga{sub 2}O{sub 3} nanowires synthesized by thermal oxidation of GaSe layer

Highlights: ► β-Ga{sub 2}O{sub 3} nanowires were synthesized through annealing GaSe crystal. ► Nanowires obtained at different annealing temperatures were characterized. ► A possible growth mechanism was proposed. - Abstract: β-Ga{sub 2}O{sub 3} nanowires were grown by thermal oxidation of GaSe single crystal surface under a mixture of argon–air flow, without the presence of a catalyst or foreign substrate. The nanowires were obtained after annealing GaSe surface at different temperatures (720 °C, 850 °C and 930 °C) for 5 h and they were characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy and selected area diffraction pattern. The lengths of the nanowires varied in the range 50–180 nm, while the typical diameters of the nanowires were in the range 60–90 nm. A possible mechanism has been proposed in order to explain the growth of oxide nanowires.

36 MATERIALS SCIENCE↗