Search NASA⌕ Search

SEARCH · Search NASA

Results for “ENGINES, COMPOUND - PERFORMANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

From Ensemble Climate to Ensemble Impacts

Many climate-risk tools rely on ensemble mean projections or endpoint climate snapshots to characterize future hazards. Although convenient for communication, these representations remove the statistical, temporal, and physical information that real infrastructure systems respond to. Infrastructure degradation and failure arise from extremes, sequences, cumulative stress, compound hazards, and nonlinear fragility relationships, none of which survive ensemble averaging or temporal compression. Power-system failure statistics and cascading failure models further show that infrastructure risk is dominated by tail events and path-dependent dynamics rather than by mean conditions. This paper demonstrates why ensemble mean or endpoint-only climate representations are mathematically and physically inconsistent with engineering-grade risk analysis. We outline a model-resolved, time-series-based workflow that preserves extremes, variability, and sequencing by propagating each climate-model realization independently through hazard formation, exposure, fragility, and cascading failure mechanisms. Taking the ensemble of impacts—rather than the ensemble of climate—provides a defensible, physically coherent foundation for infrastructure resilience planning, regulatory compliance, and long-term investment decisions.

54 - ENVIRONMENTAL SCIENCES/GLOBAL CLIMATE CHANGE ↗

Static evaluation of surface coatings for compliant gas bearings in an oxidizing atmosphere to 650 C

Hard wear-resistant coatings and soft low shear strength coatings were developed for an air-lubricated compliant journal bearing for a future automotive gas turbine engine. The coatings were expected to function in either 540 or 650 C ambient. Soft lubricant coatings were generally limited in temperature. Therefore emphasis was on the hard wear-resistant coatings. The coating materials covered were TiC, B4C, Cr3C2, WC, SiC, CrB2, TiB2, Cr2O3, Al2O3, Si3N4, Tribaloy 800, CaF2, CaF2-BaF2 eutectic, Ni-Co, silver, CdO-graphite and proprietary compounds. The coatings on test coupons were subjected to static oven screening tests. The test consisted of exposure of material samples in an oven for 300 h at the maximum temperature (540 or 650 C) and ten temperature cycles from room temperature to the maximum service temperature. On the basis of the specimen examinations the following coatings were recommended for future wear tests: TiC (sputtered), Cr2O3 (sputtered), Si3N4 (sputtered), CdO and graphite (fused), Kaman DES (a proprietary coating), CrB2 (plasma sprayed), Cr3C2 (detonation gun) and NASA PS-106 (plasma sprayed).

Bhushan, B.↗

Depositing nanometer-sized particles of metals onto carbon allotropes

A process for depositing nanometer-sized metal particles onto a substrate in the absence of aqueous solvents, organic solvents, and reducing agents, and without any required pre-treatment of the substrate, includes preparing an admixture of a metal compound and a substrate by dry mixing a chosen amount of the metal compound with a chosen amount of the substrate; and supplying energy to the admixture in an amount sufficient to deposit zero valance metal particles onto the substrate. This process gives rise to a number of deposited metallic particle sizes which may be controlled. The compositions prepared by this process are used to produce polymer composites by combining them with readily available commodity and engineering plastics. The polymer composites are used as coatings, or they are used to fabricate articles, such as free-standing films, fibers, fabrics, foams, molded and laminated articles, tubes, adhesives, and fiber reinforced articles. These articles are well-suited for many applications requiring thermal conductivity, electrical conductivity, antibacterial activity, catalytic activity, and combinations thereof.

Watson, Kent A.↗

Containing Tc-99 Using a Multi-sorbing Barrier Material - 18249

Immobilization of Tc-99 is a challenge at on-site waste disposal facilities in the DOE complex because the oxyanion pertechnetate (TcO{sub 4}{sup -}) binds weakly (if at all) to the surface of mineral solids and other conventional barrier materials (distribution coefficient, Kd<2 mL/g). The study described herein evaluated TcO{sub 4}{sup -} uptake from aqueous solutions using a multi-sorbing organo-clay barrier material synthesized from sodium-bentonite (Na-B) exchanged with hexadecyltrimethylammonium (HDTMA). The exchange transformed the negatively charged surface of Na-B to a positively charged surface to bind TcO{sub 4}{sup -}. Batch tests were conducted to evaluate sorption of TcO{sub 4}{sup -} onto the multi-sorbing clay barrier material using ammonium-pertechnetate solutions with activity ranging from 1000 to 2,000,000 pCi/L. Tests were conducted with a solid-to-liquid ratio of 1:100 in 50-mL centrifuge tubes rotated at 30 rpm for 24 hr. Solutions were created by dissolving ammonium-pertechnetate in DI water or synthetic low-level radioactive waste leachate. Solids were separated from the test solution by centrifugation at 4000 rpm for 10 min. A liquid scintillation counter was used to measure the Tc-99 in solution. Isotherms from the batch tests show that the multi-sorbing barrier material is very effective in removing Tc-99, with Kd > 2900 mL/g. Using this high capacity sorbent in engineered barriers may provide a sustainable solution to control release of Tc-99 and other anions of concern from on-site disposal facilities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Biotransformation of Pesticides across Biological Systems: Molecular Mechanisms, Omics Insights, and Biotechnological Advances for Environmental Sustainability

The widespread application of pesticides such as organophosphates, organochlorides, and triazines in modern agriculture has led to their notable presence in soils, water bodies, and food chains, raising concerns about persistence, bioaccumulation, and adverse effects on nontarget organisms. Biotransformation, the enzymatic transformation of xenobiotic compounds by microorganisms, plants, and animals, plays a pivotal role in the degradation and detoxification of these chemicals. This review provides a comprehensive examination of the mechanisms, key enzyme classes (e.g., hydrolases, oxidoreductases, transferases), and environmental factors influencing pesticide biotransformation across different biological systems. Recent advances in omics technologies have revolutionized the understanding of microbial and plant metabolism, while synthetic biology offers opportunities for engineering enhanced degradation capabilities. The environmental fate of transformation products is also discussed, together with a critical analysis of challenges, unresolved questions, and future research directions, offering a holistic perspective on pesticide biotransformation as a key process for mitigating chemical pollution.

Biotransformation↗

Simplified jet fuel reaction mechanism for lean burn combustion application

Successful modeling of combustion and emissions in gas turbine engine combustors requires an adequate description of the reaction mechanism. Detailed mechanisms contain a large number of chemical species participating simultaneously in many elementary kinetic steps. Current computational fluid dynamic models must include fuel vaporization, fuel-air mixing, chemical reactions, and complicated boundary geometries. A five-step Jet-A fuel mechanism which involves pyrolysis and subsequent oxidation of paraffin and aromatic compounds is presented. This mechanism is verified by comparing with Jet-A fuel ignition delay time experimental data, and species concentrations obtained from flametube experiments. This five-step mechanism appears to be better than the current one- and two-step mechanisms.

Lee, Chi-Ming↗

Radiation Protection Using Carbon Nanotube Derivatives

BHA and BHT are well-known food preservatives that are excellent radical scavengers. These compounds, attached to single-walled carbon nanotubes (SWNTs), could serve as excellent radical traps. The amino-BHT groups can be associated with SWNTs that have carbolyxic acid groups via acid-base association or via covalent association. The material can be used as a means of radiation protection or cellular stress mitigation via a sequence of quenching radical species using nano-engineered scaffolds of SWNTs and their derivatives. It works by reducing the number of free radicals within or nearby a cell, tissue, organ, or living organism. This reduces the risk of damage to DNA and other cellular components that can lead to chronic and/or acute pathologies, including (but not limited to) cancer, cardiovascular disease, immuno-suppression, and disorders of the central nervous system. These derivatives can show an unusually high scavenging ability, which could prove efficacious in protecting living systems from radical-induced decay. This technique could be used to protect healthy cells in a living biological system from the effects of radiation therapy. It could also be used as a prophylactic or antidote for radiation exposure due to accidental, terrorist, or wartime use of radiation- containing weapons; high-altitude or space travel (where radiation exposure is generally higher than desired); or in any scenario where exposure to radiation is expected or anticipated. This invention s ultimate use will be dependent on the utility in an overall biological system where many levels of toxicity have to be evaluated. This can only be assessed at a later stage. In vitro toxicity will first be assessed, followed by in vivo non-mammalian screening in zebra fish for toxicity and therapeutic efficacy.

Conyers, Jodie L., Jr.↗

Preliminary Report: Effects of Irradiation and Thermal Exposure on Elastomeric Seals for Cask Transportation and Storage

A testing and analysis approach to predict the sealing behavior of elastomeric seal materials in dry storage casks and evaluate their ability to maintain a seal under thermal and radiation exposure conditions of extended storage and beyond was developed, and initial tests have been conducted. The initial tests evaluate the aging response of EPDM elastomer O-ring seals. The thermal and radiation exposure conditions of the CASTOR® V/21 casks were selected for testing as this cask design is of interest due to its widespread use, and close proximity of the seals to the fuel compared to other cask designs leading to a relatively high temperature and dose under storage conditions. A novel test fixture was developed to enable compression stress relaxation measurements for the seal material at the thermal and radiation exposure conditions. A loss of compression stress of 90% is suggested as the threshold at which sealing ability of an elastomeric seal would be lost. Previous studies have shown this value to be conservative to actual leakage failure for most aging conditions. These initial results indicate that the seal would be expected to retain sealing ability throughout extended storage at the cask design conditions, though longer exposure times are needed to validate this assumption. The high constant dose rate used in the testing is not prototypic of the decreasingly low dose rate that would occur under extended storage. The primary degradation mechanism of oxidation of polymeric compounds is highly dependent on temperature and time of exposure, and with radiation expected to exacerbate the oxidation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High efficiency and brightness fluorescent organic light emitting diode by triplet-triplet fusion

A first device is provided. The first device further comprises an organic light emitting device. The organic light emitting device further comprises an anode, a cathode, and an emissive layer disposed between the anode and the cathode. The emissive layer may include an organic host compound and at least one organic emitting compound capable of fluorescent emission at room temperature. Various configurations are described for providing a range of current densities in which T-T fusion dominates over S-T annihilation, leading to very high efficiency fluorescent OLEDs.

42 ENGINEERING↗

Severity factor kinetic model as a strategic parameter of hydrothermal processing (steam explosion and liquid hot water) for biomass fractionation under biorefinery concept

Hydrothermal processes are an attractive clean technology and cost-effective engineering platform for bio-refineries based in the conversion of biomass to biofuels and high-value bioproducts under the basis of sustainability and circular bioeconomy. The deep and detailed knowledge of the structural changes by the severity of biomasses hydrothermal fractionation is scientifically and technological needed in order to improve processes effectiveness, reactors designs, and industrial application of the multi-scale target compounds obtained by stream explosion and liquid hot water systems. The concept of the severity factor [log 10 (R 0 )] established > 30 years ago, continue to be a useful index that can provide a simple description of the relationship between the operational conditions for biomass fractionation in second generation of biorefineries. Furthermore, this review develops a deep explanation of the hydrothermal severity factor based in lignocellulosic biomass fractionation with emphasis in research advances, pretreatment operations and the applications of severity factor kinetic model.

09 BIOMASS FUELS↗

Hypersonic structures and materials - A progress report

The weight of a hypersonic, airbreathing SSTO vehicle may be more critical than for any previous aerospacecraft; an evaluation is accordingly made of the development status and applicability of intermetallic compounds, metal-matrix composites, carbon-carbon composites, ceramics, and ceramic-matrix composites applicable to SSTO craft primary structures. Aerothermal, aerothermoelastic, and acoustic loads are high because the airbreathing SSTO vehicle must follow a high dynamic pressure trajectory in order to achieve the requisite propulsive efficiency. Attention is given to the prospects for integral cryogenic tankage and actively hydrogen-cooled airframe and engine structures.

Jackson, L. Robert↗

Structure of an engineered multidrug transporter MdfA reveals the molecular basis for substrate recognition

MdfA is a prototypical H + -coupled multidrug transporter that is characterized by extraordinarily broad substrate specificity. The involvement of specific H-bonds in MdfA-drug interactions and the simplicity of altering the substrate specificity of MdfA contradict the promiscuous nature of multidrug recognition, presenting a baffling conundrum. Here we show the X-ray structures of MdfA variant I239T/G354E in complexes with three electrically different ligands, determined at resolutions up to 2.2 Å. Our structures reveal that I239T/G354E interacts with these compounds differently from MdfA and that I239T/G354E possesses two discrete, non-overlapping substrate-binding sites. Our results shed new light on the molecular design of multidrug-binding and protonation sites and highlight the importance of often-neglected, long-range charge-charge interactions in multidrug recognition. Beyond helping to solve the ostensible conundrum of multidrug recognition, our findings suggest the mechanistic difference between substrate and inhibitor for any H + -dependent multidrug transporter, which may open new vistas on curtailing efflux-mediated multidrug resistance.

59 BASIC BIOLOGICAL SCIENCES↗

Surface-engineered core-shell nano-size ferrites and their antimicrobial activity

We report the results of biological study on core-shell structured MFe{sub 2}O{sub 4} (where M = Co, Mn, Ni) nanoparticles and influence of silica- DEG dual coating on their antimicrobial activity. Spherical MFe{sub 2}O{sub 4} nanoparticles were prepared via a Co-precipitation method. The microstructures and morphologies of these nanoparticles were studied by x-ray diffraction and FTIR. The antimicrobial activity study carried out in nutrient agar medium with addition of antimicrobial synthesis compound which is tested for its activity against different types of bacteria.

60 APPLIED LIFE SCIENCES↗

Human importin alpha and RNA do not compete for binding to influenza A virus nucleoprotein

Influenza virus has a segmented genome composed of eight negative stranded RNA segments. Each segment is covered with NP forming ribonucleoproteins (vRNPs) and carries a copy of the heterotrimeric polymerase complex. As a rare phenomenon among the RNA viruses, the viral replication occurs in the nucleus and therefore implies interactions between host and viral factors, such as between importin alpha and nucleoprotein. In the present study we report that through binding with the human nuclear receptor importin {alpha}5 (Imp{alpha}5), the viral NP is no longer oligomeric but maintained as a monomer inside the complex. In this regard, Imp{alpha}5 acts as a chaperone until NP is delivered in the nucleus for viral RNA encapsidation. Moreover, we show that the association of NP with the host transporter does not impair the binding of NP to RNA. The complex human Imp{alpha}5-NP binds RNA with the same affinity as wt NP alone, whereas engineered monomeric NP through point mutations binds RNA with a strongly reduced affinity.

60 APPLIED LIFE SCIENCES↗

Solid-state framing camera with multiple time frames

A high speed solid-state framing camera has been developed which can operate over a wide range of photon energies. This camera measures the two-dimensional spatial profile of the flux incident on a cadmium selenide semiconductor at multiple times. This multi-frame camera has been tested at 3.1 eV and 4.5 keV. The framing camera currently records two frames with a temporal separation between the frames of 5 ps but this separation can be varied between hundreds of femtoseconds up to nanoseconds and the number of frames can be increased by angularly multiplexing the probe beam onto the cadmium selenide semiconductor.

36 MATERIALS SCIENCE↗

Layer-structured hexagonal (BN)C semiconductor alloys with tunable optical and electrical properties

Hexagonal boron nitride carbon, h(BN){sub 1-x}(C{sub 2}){sub x}, semiconductor alloys have been grown on sapphire substrates by metal-organic chemical vapor deposition. Bandgap tuning through compositional variation has been demonstrated via optical absorption measurements. Furthermore, an enhancement of approximately 10 orders of magnitude in the electrical conductivity has been attained by increasing the carbon concentration (x) from 0 to 0.21. Experimental results revealed evidences that the critical carbon concentration x{sub c} to form the homogenous h(BN){sub 1-x}(C{sub 2}){sub x} alloys, or the carbon solubility in hBN is about 3.2% at a growth temperature of 1300 °C before carbon clusters form. Based on the predicted phase diagram of cubic (BN){sub 1-x}(C{sub 2}){sub x} and the excellent matches in the structural and thermal properties of hBN and graphite, it is expected that homogenous h(BN){sub 1-x}(C{sub 2}){sub x} alloys with higher x can be achieved and the alloy miscibility gap can be reduced or completely removed by increasing the growth temperature. This is a huge advantage over the InGaN alloy system in which InN decomposes at high temperatures and high growth temperature cannot be utilized to close the miscibility gap. The results indicate that the h(BN){sub 1-x}(C{sub 2}){sub x} alloy system has the potential to tackle the challenging issues facing the emerging two-dimension materials beyond graphene, which include realizing the bandgap engineering, conductivity control, and large wafers of homogeneous films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain control magnetocrystalline anisotropy of Ta/FeCo/MgO heterostructures

Using ab initio electronic structure calculations, we have investigated the effect of epitaxial strain on magnetocrystalline anisotropy (MCA) of Ta/FeCo/MgO heterostructure. At small expansive strains on the FeCo layer, the system exhibits perpendicular MCA (PMA). Strain not only has a profound effect on the value of MCA but also induces a switching of magnetic easy axis. Analysis of the energy- and k-resolved distribution of orbital characters of the minority-spin band reveals that a significant contribution to PMA at zero strain arises from the spin-orbit coupling between occupied d{sub x{sup 2}−y{sup 2}} and unoccupied d{sub xy} states, derived from Fe at the FeCo/MgO interface. The strain effect is attributed to strain-induced shifts of spin-orbit coupled d-states. Our work demonstrates that strain engineering can open a viable pathway towards tailoring magnetic properties for spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lubrication handbook for use in the space industry. Part A: Solid lubricants. Part B: Liquid lubricants

This handbook provides a ready reference for many of the solid and liquid lubricants used in the space industry. Lubricants and lubricant properties are arranged systematically so that designers, engineers, and maintenance personnel in the space industry can conveniently locate data needed for their work. The handbook is divided into two major parts. Part A is a compilation of chemical and physical property data of more than 250 solid lubricants, bonded solid lubricants, dispersions and composites. Part B is a compilation of chemical and physical property data of more than 250 liquid lubricants, greases, oils, compounds and fluids. The listed materials cover a broad spectrum, from manufacturing and ground support to hardware applications for missiles and spacecraft.

Campbell, M. E.↗