Search NASA⌕ Search

SEARCH · Search NASA

Results for “Extreme Environments Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Joint Test Plan for Gas Dynamic Spray Technology Demonstration

Air Force Space Command (AFSPC) and NASA have similar missions, facilities, and structures located in similar harsh environments. Both are responsible for a number of facilities/structures with metallic structural and non-structural components in highly and moderately corrosive environments. Regardless of the corrosivity of the environment, all metals require periodic maintenance activity to guard against the insidious effects of corrosion and thus ensure that structures meet or exceed design or performance life. The standard practice for protecting metallic substrates in atmospheric environments is the use of an applied coating system. Current coating systems used across AFSPC and NASA contain volatile organic compounds (VOCs) and hazardous air pollutants (HAPs). These coatings are subject to environmental regulations at the Federal and State levels that limit their usage. In addition, these coatings often cannot withstand the high temperatures and exhaust that may be experienced by AFSPC and NASA structures. In response to these concerns, AFSPC and NASA have approved the use of thermal spray coatings (TSCs). Thermal spray coatings are extremely durable and environmentally friendly coating alternatives, but utilize large cumbersome equipment for application that make the coatings difficult and time consuming to repair. Other concerns include difficulties coating complex geometries and the cost of equipment, training, and materials. Gas Dynamic Spray (GDS) technology (also known as Cold Spray) will be evaluated as a smaller, more maneuverable repair method as well as for areas where thermal spray techniques are not as effective. The technology can result in reduced maintenance and thus reduced hazardous materials/wastes associated with current processes. Thermal spray and GDS coatings also have no VOCs and are environmentally preferable coatings. To achieve a condition suitable for the application of a coating system, including GDS coatings, the substrate must undergo some type of surface preparation and/or depainting operation to ensure adhesion of the new coating system. The GDS unit selected for demonstration has a powder feeding system that can be used for surface preparation or coating application. The surface preparation feature will also be examined. The primary objective of this effort is to demonstrate GDS technology as a repair method for TSCs. The project will also determine the optimal GDS coating thickness for acceptable performance. Successful completion of this project will result in approval of GDS technology as a repair method for TSCs at AFSPC and NASA installations and will improve corrosion protection at critical systems, facilitate easier maintenance activity, extend maintenance cycles, eliminate flight hardware contamination, and reduce the amount of hazardous waste generated.

Lewis, Pattie↗
NASA NTRS2002

Non-Invasive Health Diagnostics using Eye as a 'Window to the Body'

As a 'window to the body', the eye offers the opportunity to use light in various forms to detect ocular and systemic abnormalities long before clinical symptoms appear and help develop preventative/therapeutic countermeasures early. The effects of space travel on human body are similar to those of normal aging. For example, radiation exposure in space could lead to formation of cataracts and cancer by damaging the DNA and causing gene mutation. Additionally, the zero-gravity environment causes fluid shifts in the upper extremities of the body and changes the way blood flows and organ system performs. Here on Earth, cataract, age-related macular degeneration (AMD), diabetic retinopathy (DR), and glaucoma are major eye diseases and are expected to double in next two decades. To detect, prevent, and treat untoward effects of prolonged space travel in real-time requires the development of non-invasive diagnostic technologies that are compact and powerful. We are developing fiber-optic sensors to evaluate the ocular tissues in health, aging, and disease employing the techniques of dynamic light scattering (cataract, uveitis, Alzheimer's, glaucoma, DR, radiation damage, refractive surgery outcomes), auto-fluorescence (aging, DR), laser-Doppler flowmetry (choroidal blood flow), Raman spectroscopy (AMD), polarimetry (diabetes), and retinal oximetry (occult blood loss). The non-invasive feature of these technologies integrated in a head-mounted/goggles-like device permits frequent repetition of tests, enabling evaluation of the results to therapy that may ultimately be useful in various telemedicine applications on Earth and in space.

Ansari, Rafat R.↗
NASA NTRS2012

Long-Life, Lightweight, Multi-Roller Traction Drives for Planetary Vehicle Surface Exploration

NASA s initiative for Lunar and Martian exploration will require long lived, robust drive systems for manned vehicles that must operate in hostile environments. The operation of these mechanical drives will pose a problem because of the existing extreme operating conditions. Some of these extreme conditions include operating at a very high or very cold temperature, operating over a wide range of temperatures, operating in very dusty environments, operating in a very high radiation environment, and operating in possibly corrosive environments. Current drive systems use gears with various configurations of teeth. These gears must be lubricated with oil (or grease) and must have some sort of a lubricant resupply system. For drive systems, oil poses problems such as evaporation, becoming too viscous and eventually freezing at cold temperatures, being too thin to lubricate at high temperatures, being degraded by the radiation environment, being contaminated by the regolith (soil), and if vaporized (and not sealed), it will contaminate the regolith. Thus, it may not be advisable or even possible to use oil because of these limitations. An oil-less, compact traction vehicle drive is a drive designed for use in hostile environments like those that will be encountered on planetary surfaces. Initially, traction roller tests in vacuum were conducted to obtain traction and endurance data needed for designing the drives. From that data, a traction drive was designed that would fit into a prototype lunar rover vehicle, and this design data was used to construct several traction drives. These drives were then tested in air to determine their performance characteristics, and if any final corrections to the designs were necessary. A limitation with current speed reducer systems such as planetary gears and harmonic drives is the high-contact stresses that occur at tooth engagement and in the harmonic drive wave generator interface. These high stresses induce high wear of solid lubricant coatings, thus necessitating the use of liquid lubricants for long life.

Klein, Richard C.↗
NASA NTRS1974

An interdisciplinary analysis of Colorado Rocky Mountain environments using ADP techniques

The author has identified the following significant results. Good ecological, classification accuracy (90-95%) can be achieved in areas of rugged relief on a regional basis for Level 1 cover types (coniferous forest, deciduous forest, grassland, cropland, bare rock and soil, and water) using computer-aided analysis techniques on ERTS/MSS data. Cost comparisons showed that a Level 1 cover type map and a table of areal estimates could be obtained for the 443,000 hectare San Juan Mt. test site for less than 0.1 cent per acre, whereas photointerpretation techniques would cost more than 0.4 cent per acre. Results of snow cover mapping have conclusively proven that the areal extent of snow in mountainous terrain can be rapidly and economically mapped by using ERTS/MSS data and computer-aided analysis techniques. A distinct relationship between elevation and time of freeze or thaw was observed, during mountain lake mapping. Basic lithologic units such as igneous, sedimentary, and unconsolidated rock materials were successfully identified. Geomorphic form, which is exhibited through spatial and textual data, can only be inferred from ERTS data. Data collection platform systems can be utilized to produce satisfactory data from extremely inaccessible locations that encounter very adverse weather conditions, as indicated by results obtained from a DCP located at 3,536 meters elevation that encountered minimum temperatures of -25.5 C and wind speeds of up to 40.9m/sec (91 mph), but which still performed very reliably.

Hoffer, R. M.↗
NASA NTRS2020

Supervised Autonomy for Communication-Degraded Subterranean Exploration by a Robot Team

The importance of autonomy in robotics is magnified when the robots need to be deployed and operated in areas that are too dangerous or not accessible for humans, ranging from disaster areas (to assist in emergency situations) to Mars exploration (to uncover the mystery of our neighboring planet). The DARPA Subterranean (SubT) Challenge presents a great opportunity and a formidable robotics challenge to foster such technological advancement for operations in extreme and underground environments. Robot teams are expected to rapidly map, navigate, and search underground environments including natural cave networks, tunnel systems, and urban underground infrastructure. Subterranean environments pose significant challenges for manned and unmanned operations due to limited situational awareness. In the first phase of the DARPA Subterranean Challenge (held in August 2019; targeting underground tunnels and mines), Team CoSTAR, led by NASA JPL, placed second among 11 teams across the world, accurately mapping several kilometers of two mine systems and localizing 17 target objects in the course of four one-hour missions. While the main goal of Team CoSTAR at the end of this threeyear challenge (August 2021) is a fully autonomous robotic solution, this paper describes Team CoSTAR’s results in the first phase of the challenge (August 2019), focusing on supervised autonomy of a multi-robot team under severe communication constraints. This paper also presents the design and initial results obtained from field test campaigns conducted in various tunnel-like environments, leading to the competition.

Otsu, Kyohei↗
NASA NTRS2005

Thermal Evaluation of Fiber Bragg Gratings at Extreme Temperatures

The development of integrated fiber optic sensors for use in aerospace health monitoring systems demands that the sensors be able to perform in extreme environments. In order to use fiber optic sensors effectively in an extreme environment one must have a thorough understanding of the sensor's capabilities, limitations, and performance under extreme environmental conditions. This paper reports on our current sensor evaluation examining the performance of freestanding fiber Bragg gratings (FBG) at extreme temperatures. While the ability of FBGs to survive at extreme temperatures has been established, their performance and long term survivability is not well documented. At extreme temperatures the grating structure would be expected to dissipate, degrading the sensors performance and eventually ceasing to return a detectable signal. The fiber jacket will dissipate leaving a brittle, unprotected fiber. For FBGs to be used in aerospace systems their performance and limitations need to be thoroughly understood at extreme temperatures. As the limits of the FBGs performance are pushed the long term survivability and performance of the sensor comes into question. We will not only examine the ability of FBGs to survive extreme temperatures but also look at their performance during many thermal cycles. This paper reports on test results of the performance of thermal cycling commercially available FBGs, at temperatures up to 1000 C, seen in aerospace applications. Additionally this paper will report on the performance of commercially available FBGs held at 1000 C for hundreds of hours. Throughout the evaluation process, various parameters of the FBGs performance were monitored and recorded. Several test samples were subjected to identical test conditions to allow for statistical analysis of the data. Test procedures, calibrations, referencing techniques, performance data, and interpretations and explanations of results are presented in the paper along with directions for future research.

Juergens, Jeffrey↗
NASA NTRS2024

Establishing Standards for Lunar In Situ Resource Utilization Structural Materials

Lunar structures will be exposed to one of the most extreme environments that have ever been considered for human settlements. In situ, regolith-based materials are being proposed for construction on the moon, offering the benefit of reducing the cost of transporting large amounts of materials or prefabricated elements, and relying on the ability to transport mainly the equipment needed to construct landing pads, shelters, blast shields, habitats, roadways, etc. However, the properties of materials that are made, all or in part, from indigenous lunar resources are likely to change based on the make-up of the material, the location where it was taken from, the production processes, and time. No standards or building codes exist for the design and construction of infrastructure on the moon. Engineers will need dependable information about these materials before any design can be completed. Hard-won lessons from centuries of using similar resources on Earth need to be leveraged to develop the best procedures that will be critical for testing such materials for structural applications. Here we discuss the technical challenges of establishing such standards. Using the timely example of a landing pad on the moon, we identify the gaps in both knowledge and testing capabilities that exist today.

Shirley J. Dyke↗
NASA NTRS2013

Nanoscale Surface Plasmonics Sensor With Nanofluidic Control

Conventional quantitative protein assays of bodily fluids typically involve multiple steps to obtain desired measurements. Such methods are not well suited for fast and accurate assay measurements in austere environments such as spaceflight and in the aftermath of disasters. Consequently, there is a need for a protein assay technology capable of routinely monitoring proteins in austere environments. For example, there is an immediate need for a urine protein assay to assess astronaut renal health during spaceflight. The disclosed nanoscale surface plasmonics sensor provides a core detection method that can be integrated to a lab-on-chip device that satisfies the unmet need for such a protein assay technology. Assays based upon combinations of nanoholes, nanorings, and nanoslits with transmission surface plasmon resonance (SPR) are used for assays requiring extreme sensitivity, and are capable of detecting specific analytes at concentrations as low as picomole to femtomole level in well-controlled environments. The device operates in a transmission mode configuration in which light is directed at one planar surface of the array, which functions as an optical aperture. The incident light induces surface plasmon light transmission from the opposite surface of the array. The presence of a target analyte is detected by changes in the spectrum of light transmitted by the array when a target analyte induces a change in the refractive index of the fluid within the nanochannels. This occurs, for example, when a target analyte binds to a receptor fixed to the walls of the nanochannels in the array. Independent fluid handling capability for individual nanoarrays on a nanofluidic chip containing a plurality of nanochannel arrays allows each array to be used to sense a different target analyte and/or for paired arrays to analyze control and test samples simultaneously in parallel. The present invention incorporates transmission mode nanoplasmonics and nanofluidics into a single, microfluidically controlled device. The device comprises one or more arrays of aligned nanochannels that are in fluid communication with inflowing and outflowing fluid handling manifolds that control the flow of fluid through the arrays. The array acts as an aperture in a plasmonic sensor. Fluid, in the form of a liquid or a gas and comprising a sample for analysis, is moved from an inlet manifold through the nanochannel array, and out through an exit manifold. The fluid may also contain a reagent used to modify the interior surfaces of the nanochannels, and/or a reagent required for the detection of an analyte.

Wei, Jianjun↗
NASA NTRS2002

The Propulsive Small Expendable Deployer System (ProSEDS)

This Annual Report covers the following main topics: 1) Updated Reference Mission. The reference ProSEDS (Propulsive Small Expendable Deployer System) mission is evaluated for an updated launch date in the Summer of 2002 and for the new 80-s current operating cycle. Simulations are run for nominal solar activity condition at the time of launch and for extreme conditions of dynamic forcing. Simulations include the dynamics of the system, the electrodynamics of the bare tether, the neutral atmosphere and the thermal response of the tether. 2) Evaluation of power delivered by the tether system. The power delivered by the tethered system during the battery charging mode is computed under the assumption of minimum solar activity for the new launch date. 3) Updated Deployment Control Profiles and Simulations. A number of new deployment profiles were derived based on the latest results of the deployment ground tests. The flight profile is then derived based on the friction characteristics obtained from the deployment tests of the F-1 tether. 4) Analysis/estimation of deployment flight data. A process was developed to estimate the deployment trajectory of the endmass with respect to the Delta and the final libration amplitude from the data of the deployer turn counters. This software was tested successfully during the ProSEDS mission simulation at MSFC (Marshall Space Flight Center) EDAC (Environments Data Analysis Center).

Lorenzini, Enrico C.↗
NASA NTRS2010

Integration and Testing of the Lunar Reconnaissance Orbiter Attitude Control System

Throughout the Lunar Reconnaissance Orbiter (LRO) Integration and Testing (I&T) phase of the project, the Attitude Control System (ACS) team completed numerous tests on each hardware component in ever more flight like environments. The ACS utilizes a select group of attitude sensors and actuators. This paper chronicles the evolutionary steps taken to verify each component was constantly ready for flight as well as providing invaluable trending experience with the actual hardware. The paper includes a discussion of each ACS hardware component, lessons learned of the various stages of I&T, a discussion of the challenges that are unique to the LRO project, as well as a discussion of work for future missions to consider as part of their I&T plan. LRO ACS sensors were carefully installed, tested, and maintained over the 18 month I&T and prelaunch timeline. Care was taken with the optics of the Adcole Coarse Sun Sensors (CSS) to ensure their critical role in the Safe Hold mode was fulfilled. The use of new CSS stimulators provided the means of testing each CSS sensor independently, in ambient and vacuum conditions as well as over a wide range of thermal temperatures. Extreme bright light sources were also used to test the CSS in ambient conditions. The integration of the two SELEX Galileo Star Trackers was carefully planned and executed. Optical ground support equipment was designed and used often to check the performance of the star trackers throughout I&T in ambient and thermal/vacuum conditions. A late discovery of potential contamination of the star tracker light shades is discussed in this paper. This paper reviews how each time the spacecraft was at a new location and orientation, the Honeywell Miniature Inertial Measurement Unit (MIMU) was checked for data output validity. This gyro compassing test was performed at several key testing points in the timeline as well as several times while LRO was on the launch pad. Sensor alignment tests were completed several times to ensure that hardware remained on a rigid platform.

Simpson, Jim↗
NASA NTRS1999

Quality Control of Meteorological Observations

For the first time, a problem of the meteorological observation quality control (QC) was formulated by L.S. Gandin at the Main Geophysical Observatory in the 70's. Later in 1988 L.S. Gandin began adapting his ideas in complex quality control (CQC) to the operational environment at the National Centers for Environmental Prediction. The CQC was first applied by L.S.Gandin and his colleagues to detection and correction of errors in rawinsonde heights and temperatures using a complex of hydrostatic residuals.Later, a full complex of residuals, vertical and horizontal optimal interpolations and baseline checks were added for the checking and correction of a wide range of meteorological variables. some other of Gandin's ideas were applied and substantially developed at other meteorological centers. A new statistical QC was recently implemented in the Goddard Data Assimilation System. The central component of any quality control is a buddy check which is a test of individual suspect observations against available nearby non-suspect observations. A novel feature of this test is that the error variances which are used for QC decision are re-estimated on-line. As a result, the allowed tolerances for suspect observations can depend on local atmospheric conditions. The system is then better able to accept extreme values observed in deep cyclones, jet streams and so on. The basic statements of this adaptive buddy check are described. Some results of the on-line QC including moisture QC are presented.

Collins, William↗
NASA NTRS2013

The Antarctic Search for Meteorites: A Model for Deep Space Exploration

In an era of shrinking buying power and reduced flight opportunities, NASA must extract the greatest possible value from all sources of insight into the future of human space exploration. Antarctica is one such source. The history of Antarctic exploration has many political and technical parallels with the development of space, and Antarctica's remoteness and harsh climate make it an excellent proxy for space (e.g., [1,2]). Links between exploration of space and of the Antarctic date back to the International Geophysical Year of 1957-1958, which saw both the launch of Sputnik 1 and the establishment of a station at the South Pole. The Antarctic Search for Meteorites (ANSMET) is an annual expedition to the south polar plateau to collect meteorites. Although its intent is not to simulate a space mission, the handful of astronauts who have participated in ANSMET agree that it is very similar to a long-duration space flight. Independently, NASA and other space agencies have simulated deep space exploration missions in "analog" activities at remote field sites on Earth (e.g., [3]). These include NASA Extreme Environment Mission Operations (NEEMO) [4,5], Desert Research And Technology Studies (Desert RATS) [6,7], and the Pavilion Lake Research Project (PLRP or simply Pavilion Lake) [8]. This report focuses on NEEMO, Desert RATS, and PLRP because of the author's firsthand experience with them. Other noteworthy analogs, such as the arctic Haughton Mars Project and the European Space Agency's underground Cooperative Adventure for Valuing and Exercising human behavior and performance Skills (CAVES), are not treated here. NASA analogs often include fully staffed control centers, astronauts serving as crew, and realistic mission timelines lasting one to two weeks. Analogs have provided key insights into system architectures and operational concepts for the future human exploration of deep space. They have pioneered techniques for human communication with significant speed-of-light delays, for conducting spacewalks on natural objects with negligible surface gravity, and for empowering exploration crews to work with reduced dependence on a ground control center. They have field-tested dozens of emerging technologies including spacewalking tools and full-scale prototype vehicles and habitats. They have provided valuable experience for astronauts preparing for their first space flight, and for flown crewmembers who will take command roles on later flights. Some analogs, especially PLRP, have connected observers in the field with science teams in remotely located control centers to produce high-quality, publishable scientific results. The analogs have accomplished all of this at a tiny fraction of the cost of an actual space flight. This report treats ANSMET as space flight analog. The chapter following this introduction describes ANSMET in depth. The report then presents data on logistics and crew considerations that may be useful for developers of future human space exploration missions. It offers detailed comparisons between ANSMET and past, present, and future space flights on the Space Shuttle, the International Space Station (ISS), and a proposed Mars mission. Those comparisons are intended to complement the work of Eppler [2], who compares ANSMET to the Apollo moon flights. This report also compares ANSMET with the Desert RATS, NEEMO, and PLRP analogs. It then presents observations and makes recommendations related to ANSMET's value as a simulated space mission. The report ends with a short conclusion. The remainder of this introductory chapter provides background material to help readers interpret the rest of the report. It gives brief overviews of Space Shuttle and ISS missions along with information on a notional future human flight to Mars. It also presents the general features of three of NASA's space flight "analog" projects. With those points of reference in place, the chapter concludes with an overview of ANSMET.

Love, Stanley G.↗
NASA NTRS2013

Thermal Design and Analysis of the Supersonic Flight Dynamics Test Vehicle for the Low Density Supersonic Decelerator Project

The thermal design and analysis of the experimental Supersonic Flight Dynamics Test (SFDT) vehicle is presented. The SFDT vehicle is currently being designed as a platform to help demonstrate key technologies for NASA's Low Density Supersonic Decelerator (LDSD) project. The LDSD project is charged by NASA's Office of the Chief Technologist (OCT) with the task of advancing the state of the art in Mars Entry, Descent, and Landing (EDL) systems by developing and testing three new technologies required for landing heavier payloads on Mars. The enabling technologies under development consist of a large 33.5 meter diameter Supersonic Ringsail (SSRS) parachute and two different types of Supersonic Inflatable Aerodynamic Decelerator (SIAD) devices - a robotic class, SIAD-R, that inflates to a 6 meter diameter torus, and an exploration class, SIAD-E, that inflates to an 8 meter diameter isotensoid. As part of the technology development effort, the various elements of the new supersonic decelerator system must be tested in a Mars-like environment. This is currently planned to be accomplished by sending a series of SFDT vehicles into Earth's stratosphere. Each SFDT vehicle will be lifted to a stable float altitude by a large helium carrier balloon. Once at altitude, the SFDT vehicles will be released from their carrier balloon and spun up via spin motors to provide trajectory stability. An onboard third stage solid rocket motor will propel each test vehicle to supersonic flight in the upper atmosphere. After main engine burnout, each vehicle will be despun and testing of the deceleration system will begin: first an inflatable decelerator will be deployed around the aeroshell to increase the drag surface area, and then the large parachute will be deployed to continue the deceleration and return the vehicle back to the Earth's surface. The SFDT vehicle thermal system must passively protect the vehicle structure and its components from cold temperatures experienced during the ascent phase of the mission as well as from the extreme heat fluxes produced during the supersonic test phase by the main motor plume and aeroheating. The passive thermal design approach for the SFDT vehicle relies upon careful and complex bounding analysis of all three modes of heat transfer - conduction, convection, and radiation - coupled with a tightly managed transient power dissipation timeline for onboard electronics components throughout all mission phases.

thermal desktop↗
NASA NTRS2024

Terrestrial Proving Ground Capabilities Needed for Lunar In Situ Resource Utilization (ISRU) & Construction Concepts of Operation

Incorporating any new technology or system into a human exploration mission or architecture requires development well in advance of the mission to eliminate technology, cost, and schedule risk concerns. It is often stated that technologies need to be at a Technology Readiness Level (TRL) of 6, i.e. ‘system/subsystem model or prototype demonstration in a relevant environment (ground or space)’, by Authority To Proceed (ATP) or by the Preliminary Design Review (PDR) for the mission at the latest. There are two game changing capabilities for sustained human exploration of space that can have a significant effect on the overall exploration architecture and the technologies and systems included in the architecture. The first game changing capability, known as In Situ Resource Utilization (ISRU), involves the search for, acquisition, and processing of resources on the Moon and Mars into mission consumables and usable products, and the second is the ability to utilize space resources in the construction of roads, structures, and surface infrastructure. ISRU and surface construction capabilities have the potential to greatly reduce the cost and risk of human exploration while enabling sustained lunar surface and commercial operations. However, ISRU and surface construction systems are complex and must operate in extremely harsh environments, with abrasive regolith and pervasive dust, for long-periods of time, with potentially limited opportunities for maintenance and repair by humans. The complexity of these capabilities and operations also means that there are a limited number of companies that can design, build, and operate end-to-end systems on their own. The majority of the technologies being developed for these systems are by small companies and at the component or subsystem level. With the overarching strategy of the United States National Aeronautics and Space Administration (NASA) Space Technology Mission Directorate (STMD) to enable industry to implement ISRU and surface infrastructure for Artemis and space commercialization, it is therefore important to establish processes and capabilities to promote and foster collaborations among large and small companies involved in ISRU and surface infrastructure development. For ISRU and infrastructure systems and capabilities to be used in Artemis missions and future commercial lunar surface operations, a coordinated framework with virtual/physical integration and testing locations, or ‘Proving Grounds’, needs to be established and operated on a regular basis and open to all. This paper will discuss the ISRU and surface construction near and long-term concepts of operations, and review operations and lessons-learned from the previous ISRU analog field tests. From this information, requirements and capabilities will be proposed to support and enable the integration and testing of ISRU and construction systems with industry, academia, and international agencies, as well as what facilities and organizations could help establish these Proving Grounds.

ISRU↗
NASA NTRS2013

NASA Tech Briefs, May 2013

Topics include: Test Waveform Applications for JPL STRS Operating Environment; Pneumatic Proboscis Heat-Flow Probe; Method to Measure Total Noise Temperature of a Wireless Receiver During Operation; Cursor Control Device Test Battery; Functional Near-Infrared Spectroscopy Signals Measure Neuronal Activity in the Cortex; ESD Test Apparatus for Soldering Irons; FPGA-Based X-Ray Detection and Measurement for an X-Ray Polarimeter; Sequential Probability Ratio Test for Spacecraft Collision Avoidance Maneuver Decisions; Silicon/Carbon Nanotube Photocathode for Splitting Water; Advanced Materials and Fabrication Techniques for the Orion Attitude Control Motor; Flight Hardware Packaging Design for Stringent EMC Radiated Emission Requirements; RF Reference Switch for Spaceflight Radiometer Calibration; An Offload NIC for NASA, NLR, and Grid Computing; Multi-Scale CNT-Based Reinforcing Polymer Matrix Composites for Lightweight Structures; Ceramic Adhesive and Methods for On-Orbit Repair of Re-Entry Vehicles; Self-Healing Nanocomposites for Reusable Composite Cryotanks; Pt-Ni and Pt-Co Catalyst Synthesis Route for Fuel Cell Applications; Aerogel-Based Multilayer Insulation with Micrometeoroid Protection; Manufacturing of Nanocomposite Carbon Fibers and Composite Cylinders; Optimized Radiator Geometries for Hot Lunar Thermal Environments; A Mission Concept: Re-Entry Hopper-Aero-Space-Craft System on-Mars (REARM-Mars); New Class of Flow Batteries for Terrestrial and Aerospace Energy Storage Applications; Reliability of CCGA 1152 and CCGA 1272 Interconnect Packages for Extreme Thermal Environments; Using a Blender to Assess the Microbial Density of Encapsulated Organisms; Mixed Integer Programming and Heuristic Scheduling for Space Communication; Video Altimeter and Obstruction Detector for an Aircraft; Control Software for Piezo Stepping Actuators; Galactic Cosmic Ray Event-Based Risk Model (GERM) Code; Sasquatch Footprint Tool; and Multi-User Space Link Extension (SLE) System.

Source record↗
NASA NTRS2017

Smashing the Stovepipe: Leveraging the GMSEC Open Architecture and Advanced IT Automation to Rapidly Prototype, Develop and Deploy Next-Generation Multi-Mission Ground Systems

Satellite/Payload Ground Systems - Typically highly-customized to a specific mission's use cases - Utilize hundreds (or thousands!) of specialized point-to-point interfaces for data flows / file transfers Documentation and tracking of these complex interfaces requires extensive time to develop and extremely high staffing costs Implementation and testing of these interfaces are even more cost-prohibitive, and documentation often lags behind implementation resulting in inconsistencies down the road With expanding threat vectors, IT Security, Information Assurance and Operational Security have become key Ground System architecture drivers New Federal security-related directives are generated on a daily basis, imposing new requirements on current / existing ground systems - These mandated activities and data calls typically carry little or no additional funding for implementation As a result, Ground System Sustaining Engineering groups and Information Technology staff continually struggle to keep up with the rolling tide of security Advancing security concerns and shrinking budgets are pushing these large stove-piped ground systems to begin sharing resources - I.e. Operational / SysAdmin staff, IT security baselines, architecture decisions or even networks / hosting infrastructure Refactoring these existing ground systems into multi-mission assets proves extremely challenging due to what is typically very tight coupling between legacy components As a result, many "Multi-Mission" ops. environments end up simply sharing compute resources and networks due to the difficulty of refactoring into true multi-mission systems Utilizing continuous integration / rapid system deployment technologies in conjunction with an open architecture messaging approach allows System Engineers and Architects to worry less about the low-level details of interfaces between components and configuration of systems GMSEC messaging is inherently designed to support multi-mission requirements, and allows components to aggregate data across multiple homogeneous or heterogeneous satellites or payloads - The highly-successful Goddard Science and Planetary Operations Control Center (SPOCC) utilizes GMSEC as the hub for it's automation and situational awareness capability Shifts focus towards getting GS to a final configuration-managed baseline, as well as multi-mission / big-picture capabilities that help increase situational awareness, promote cross-mission sharing and establish enhanced fleet management capabilities across all levels of the enterprise.

GMSEC↗
NASA NTRS2016

Finding Stuff Underwater: Open-Source Tools for Underwater Field Science

Since 2009, we have been developing and testing Exploration Ground Data Systems (xGDS). xGDS is a software suite, built on open-source web technologies, for supporting NASA terrestrial field science analog missions. We will describe our recent work supporting underwater mapping and dive operations at the Pavilion Lake Research Project (PLRP - www.pavilionlake.com). At PLRP we used open-source mapping technologies to meet an operational need to quickly guide divers and underwater vehicles to locations of interest, and the scientific goal of building a map showing the locations and characteristics of the microbialites at the bottom of the lake. We will discuss some of the benefits and lessons-learned from our recent transition from Google Earth to OpenLayers as the primary mapping engine to support our work. Well also explain the challenges we faced and solutions weve developed to support mapping and data collection in an underwater environment.Beyond their immediate value for advancing scientific research on Earth, NASA analogs explore new ideas for supporting scientists working in extreme environments (e.g. underwater) to develop best practices for future human missions to the Moon or Mars. Science at PLRP involved imaging, sampling and characterizing microbialites growing beneath the surface of an alpine lake in British Columbia. To support PLRP operations and science, xGDS helped plan data collection tasks and provided accurate tracking and mapping of the locations of the underwater assets (human-piloted submersibles, remotely operated vehicles (ROVs) and human divers) collecting imagery and samples from the lake. The data collected during our field work was registered with precursor bathymetry data collected by an autonomous underwater vehicle (AUV) and was globally located on a satellite base layer map of the area surrounding the lake.

Earth analogs↗
NASA NTRSDate not supplied

NASA Lunar Surface Innovation Initiative: Ensuring a Cohesive, Executable Strategy for Technology Development

Establishing a sustainable human presence on the Moon allows NASA to develop and test new approaches, technologies, and systems that will enable us to function in other, more challenging environments. The Lunar Surface Innovation Initiative (LSII) was established in 2019 and has evolved into a key agency asset to spur technology development and provide risk reduction for lunar surface system development and flight demonstrations. LSII coordinates activities implemented through a combination of in-house activities, competitive programs, and public-private partnerships to create transformative technologies needed for lunar surface exploration. This paper will outline the LSII model used to develop a technology pipeline that will retire the primary technology hurdles in six capability areas. In-situ resource utilization technologies for collecting, processing, storing, and using material found or manufactured on the Moon. Surface power technologies that provide the capability for sustainable, continuous power throughout the day and night for lunar missions. Dust mitigation strategies that diminish lunar dust hazards on lunar surface systems such as cameras, solar panels, space suits, habitats, and instrumentation. Extreme environments technologies that enable systems to operate throughout the full range of lunar surface conditions, including lunar noon (up to 150 at the equator), night (down to - 180 at the equator), multiple day/night cycles, and in permanently shadowed regions (down to -250). Extreme access technologies that enable humans or robotic systems to access, navigate, and explore previously inaccessible lunar surface or subsurface areas. Excavation and construction technologies that will allow affordable, autonomous manufacturing or construction. We outline key results, including milestones and achievements related to the capability areas and outcomes from partnerships with the commercial sector. A key tenet of the LSII is the Lunar Surface Innovation Consortium (LSIC), a collaboration across industry, academia, and government to successfully develop the transformative capabilities for lunar surface exploration. LSIC provides a forum for NASA to communicate technological requirements, needs, and opportunities and for the community to share existing capabilities and identify critical gaps with NASA. By working side by side with commercial enterprises and our international partners, NASA is able to combine the knowledge and expertise needed to explore the lunar surface and make technical advances that will feed technological and economic growth. Since its inception, LSII has engaged over 600 organizations across the United States and 46 countries to shape the technologies and systems needed to explore the lunar surface and stimulate a lunar surface economy.

lunar, lunar surface, technology development, ISRU↗