Search NASA⌕ Search

SEARCH · Search NASA

Results for “Grid Generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Dynamics of local grid manipulations for internal flow problems

The control point method of algebraic grid generation is briefly reviewed. The review proceeds from the general statement of the method in 2-D unencumbered by detailed mathematical formulation. The method is supported by an introspective discussion which provides the basis for confidence in the approach. The more complex 3-D formulation is then presented as a natural generalization. Application of the method is carried out through 2-D examples which demonstrate the technique.

Eiseman, Peter R.↗
NASA NTRS1991

The design/analysis of flows through turbomachinery: A viscous/inviscid approach

The development of a design/analysis flow solver at NASA Lewis Research Center is discussed. The solver is axisymmetric and can be run inviscidly with assumed or calculated blockages, or with the viscous terms computed. The blade forces for each blade row are computed from blade-to-blade solutions, correlated data or force model, or from a full three dimensional solution. Codes currently under development can be separated into three distinct elements: the turbomachinery interactive grid generator energy distribution restart code (TIGGERC), the interactive blade element geometry generator (IBEGG), and the viscous/inviscid multi-blade-row average passage flow solver (VIADAC). Several experimental test cases were run to validate the VIADAC code. The tests, representative of typical axial turbomachinery duct axisymmetric wind tunnel body problems, were conducted on an SR7 Spinner axisymmetric body, a NASA Rotor 67 Fan test bed, and a transonic boatail body. The results show the computations to be in good agreement with test data.

Miller, D. P.↗
NASA NTRS1990

A linear shock cell model for non-circular jets using conformal mapping with a pseudo-spectral hybrid scheme

The shock structure in non-circular supersonic jets is predicted using a linear model. This model includes the effects of the finite thickness of the mixing layer and the turbulence in the jet shear layer. A numerical solution is obtained using a conformal mapping grid generation scheme with a hybrid pseudo-spectral discretization method. The uniform pressure perturbation at the jet exit is approximated by a Fourier-Mathieu series. The pressure at downstream locations is obtained from an eigenfunction expansion that is matched to the pressure perturbation at the jet exit. Results are presented for a circular jet and for an elliptic jet of aspect ratio 2.0. Comparisons are made with experimental data.

Bhat, Thonse R. S.↗
NASA NTRS1990

Automated domain decomposition for computational fluid dynamics

Automation of flow-field zoning in two-dimensions is an important step towards easing the three-dimensional grid generation bottleneck in computational fluid dynamics. A knowledge-based approach works well, but several aspects of flow-field zoning make the use of such an approach challenging. A proposed model and language to describe the process of zoning a flow field are presented, followed by a discussion of the implementation of EZGrid, a knowledge-based two-dimensional (2-D) flow-field zoner. Results are shown for representative two-dimensional aerodynamic configurations. Finally, an approach to the evaluation of flow-field zonings is described and used to compare the performance of EZGrid with that of a human expert.

Vogel, Alison Andrews↗
NASA NTRS1991

Numerical prediction of the unsteady flowfield around the F-18 aircraft at large incidence

This paper describes a numerical method capable of solving the steady and unsteady viscous flow around complete aircraft configurations at high angles of attack. This method is used to simulate the external flow around the F-18 aircraft, including deflected control surfaces. The current technique employs a generalized overset zonal grid scheme to decompose the computational space around the aircraft. The grid around various components of the aircraft are created numerically using a three-dimensional hyperbolic grid generation procedure. The Reynolds-averaged Navier-Stokes equations are integrated using a time-accurate, implicit procedure. Results for the turbulent flow around the F-18 aircraft at 30 degrees angle of attack show the details of the flowfield structure, including the unsteadiness created by the vortex burst and the resulting fluctuating airloads exerted on the vertical tail. The computed results agree fairly well with flight data for surface pressure, surface flow pattern, vortex burst location, and the dominant frequency for tail load fluctuations.

Rizk, Yehia M.↗
NASA NTRS1991

A new Lagrangian random choice method for steady two-dimensional supersonic/hypersonic flow

Glimm's (1965) random choice method has been successfully applied to compute steady two-dimensional supersonic/hypersonic flow using a new Lagrangian formulation. The method is easy to program, fast to execute, yet it is very accurate and robust. It requires no grid generation, resolves slipline and shock discontinuities crisply, can handle boundary conditions most easily, and is applicable to hypersonic as well as supersonic flow. It represents an accurate and fast alternative to the existing Eulerian methods. Many computed examples are given.

Loh, C. Y.↗
NASA NTRS1991

A numerical investigation of turbulent baseflow

The turbulent base flow of a cone with a sting in hypersonic flow is investigated using a time-dependent Navier-Stokes code called UWIN. A PNS solver provides the upstream flow conditions which drive the development of the base flow. The computational method is described along with its application to the base flow problem. The grid generation and boundary conditions are described. The results and the summary conclude this note.

Chaussee, Denny S.↗
NASA NTRS1991

The design/analysis of flows through turbomachinery - A viscous/inviscid approach

A new design/analysis system for the flows through turbomachinery is currently being developed for studying turbomachinery problems with an axisymmetric viscous/inviscid 'average-passage' throughflow code. The advantage of this approach, compared to streamline curvature codes, is that the solutions obtained simulate some of the unsteadiness, compressibility and viscous effects of a multistage turbomachine. The design/analysis system consists of three elemental parts, the axisymmetric block grid generator, the blade surface element code, and the axisymmetric flow code. Each element of the system will be discussed and the flow solutions for three axisymmetric geometries will be shown compared to experimental data where available. The computations are shown to be in very good agreement with test data for SR7 spinner body and transonic boattail geometry obtained in the wind tunnels at NASA Lewis Research Center. The VIADAC Rotor 67 Fan results were compared to PARC2D calculated results and shown to be in very good agreement.

Miller, D. P.↗
NASA NTRS1989

The simulation of hypersonic flow using a zonal approach

The development of a Navier-Stokes code for the simulation of hypersonic flow will be described. The code uses a zonal philosophy which helps alleviate the grid generation problem for complex configurations and allows an efficient solution procedure. The code has been used to simulate equilibrium flow past a simple generic hypersonic configuration. Validation of the code on a blunt cone has also been conducted.

Flores, Jolen↗
NASA NTRS1989

Hypersonic 3-D flow past winged bodies

The hypersonic flow past winged bodies is calculated using the 3D Navier-Stokes equations in both a space- and time-marching finite difference code. The bodies are a blunt ogive-cylinder with a delta wing planform and an elliptical body referred to as the allbody configuration. Laminar flow solutions for the ogive-cylinder-wing body and for the allbody configuration are presented. It is shown that the present technique has an excellent shock-capturing capability for all speed regimes. An axial zonal capability is incorporated to make the procedure more versatile. The grid system is created offline using an efficient hyperbolic grid generator which can handle the rapid variations in the body cross sections.

Chaussee, Denny S.↗
NASA NTRS1990

Prospects for drag prediction using computational fluid dynamics

An account is given of CFD methods deemed likely to yield aerodynamic drag prediction improvements. Improvements in drag prediction are noted to largely proceed from improvements in viscous-layer resolution. Geometric modeling and grid generation are acknowledged to be major pacing items, and may be more important than turbulence modeling. The use of upwind differencing has led to improved solution accuracy due to the nature of the artificial viscosity in cases involving shocks and nonphysical dissipation across viscous layers. Multiblock algorithms will allow more complex geometries to be treated.

Roberts, Thomas W.↗
NASA NTRS1991

Transonic Navier-Stokes flow computations over wing-fuselage geometries

The steady-state transonic viscous flows over two wing-fuselage configurations are solved numerically. The 3D compressible thin-layer Navier-Stokes equations are solved by means of multistage timestepping similar to the Runge-Kutta method. The timestepping technique is applied with a multigrid scheme to make the transonic Navier-Stokes computations using the Baldwin-Lomax turbulence for closure and converging the solution on a grid of 1.52 million grid points with a C-O topology. Both generic and fighter wing-fuselage geometries are solved, and the results are compared to experimental studies. Solution convergence is found to be fast, and the fine grid generates accurate results for both configurations by means of the Baldwin-Lomax turbulence model. Results from the Johnson-King model calculations produce results that are more consistent with experimental results for the fighter configuration.

Agrawal, S.↗
NASA NTRS1991

Euler solutions for an unbladed jet engine configuration

A Euler solution for an axisymmetric jet engine configuration without blade effects is presented. The Euler equations are solved on a multiblock grid which covers a domain including the inlet, bypass duct, core passage, nozzle, and the far field surrounding the engine. The simulation is verified by considering five theoretical properties of the solution. The solution demonstrates both multiblock grid generation techniques and a foundation for a full jet engine throughflow calculation.

Stewart, Mark E. M.↗
NASA NTRS1991

Enhancement of surface definition and gridding in the EAGLE code

Algorithms for smoothing of curves and surfaces for the EAGLE grid generation program are presented. The method uses an existing automated technique which detects undesirable geometric characteristics by using a local fairness criterion. The geometry entity is then smoothed by repeated removal and insertion of spline knots in the vicinity of the geometric irregularity. The smoothing algorithm is formulated for use with curves in Beta spline form and tensor product B-spline surfaces.

Thompson, Joe F.↗
NASA NTRS1992

A numerical code for a three-dimensional magnetospheric MHD equilibrium model

Two dimensional and three dimensional MHD equilibrium models were begun for Earth's magnetosphere. The original proposal was motivated by realizing that global, purely data based models of Earth's magnetosphere are inadequate for studying the underlying plasma physical principles according to which the magnetosphere evolves on the quasi-static convection time scale. Complex numerical grid generation schemes were established for a 3-D Poisson solver, and a robust Grad-Shafranov solver was coded for high beta MHD equilibria. Thus, the effects were calculated of both the magnetopause geometry and boundary conditions on the magnetotail current distribution.

Voigt, G.-H.↗
NASA NTRS1992

Computational fluid dynamics for propulsion technology: Geometric grid visualization in CFD-based propulsion technology research

The coordination is examined of necessary resources, facilities, and special personnel to provide technical integration activities in the area of computational fluid dynamics applied to propulsion technology. Involved is the coordination of CFD activities between government, industry, and universities. Current geometry modeling, grid generation, and graphical methods are established to use in the analysis of CFD design methodologies.

Ziebarth, John P.↗
NASA NTRS1992

The NASA-IGES geometry data exchange standard

Described here are the data exchange efforts and plans supported by the NASA Steering Committee for Surface Modeling and Grid Generation. Current methods for geometry data exchange between computer aided design (CAD) systems and NASA computational fluid dynamics (CFD) analysis systems are tedious and induce errors. A Geometry Data Exchange Standard is proposed, utilizing a subset of an existing national standard titled Initial Graphic Exchange Standard (IGES). Future plans for data exchange standardization include all aspects of CFD data. Software systems to utilize this NASA-IGES Geometry Data Exchange Specification are under development.

Blake, Matthew W.↗
NASA NTRS1992

The NASA-IGES geometry data visualizer

NIGESview, an interactive software tool for reading, viewing, and translating geometry data available in the Initial Graphics Exchange Specification (IGES) format, is described. NIGESview is designed to read a variety of IGES entities, translate some of the entities, graphically view the data, and output a file in a specific IGES format. The software provides a modern graphical user interface and is designed in a modular fashion so developers can utilize all or part of the code in their grid generation software for computational fluid dynamics.

Blake, Matthew W.↗