Search NASA⌕ Search

SEARCH · Search NASA

Results for “Injections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Computational modeling of the effect of external electron injection into a direct-current microdischarge

Electron emission from the electrode surface plays an important role in determining the structure of a direct-current microdischarge. Here we have developed a computational model of a direct-current microdischarge to study the effect of external electron injection from the cathode surface into the discharge to manipulate its properties. The model provides a self-consistent, multi-species, multi-temperature fluid representation of the plasma. A microdischarge with a metal-insulator-metal configuration is chosen for this study. The effect of external electron injection on the structure and properties of the microdischarge is described. The transient behavior of the microdischarge during the electron injection is examined. The nonlinearities in the dynamics of the plasma result in a large increase of conduction current after active electron injection. For the conditions simulated a switching time of ∼100 ns from a low-current to high-current discharge state is realized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanism of hole injection enhancement in light-emitting diodes by inserting multiple hole-reservoir layers in electron blocking layer

In this study, gallium nitride (GaN) based light-emitting diodes (LEDs) with single and multiple hole-reservoir layers (HRLs) inserted in the electron-blocking layer (EBL) have been investigated numerically and experimentally. According to simulation results, a better electron confinement and a higher hole injection level can be achieved by the multiple HRLs inserted in the EBL region. To further reveal the underlying mechanism of hole injection enhancement experimentally, the active regions were intentionally designed to emit photons with three different wavelengths of 440 nm, 460 nm, and 480 nm, respectively. Based on the experimental results of photoluminescence (PL) and time-resolved PL (TRPL) measurements conducted at 298 K, the remarkable enhancement (148%) of PL intensities and significant increase in the decay times of the quantum wells close to p-GaN can be obtained. Therefore, the mechanism is proposed that carriers are able to reserve in the EBL region with multiple HRLs for a much longer time. Meanwhile, carriers could diffuse into the active region by tunnelling and/or thermo-electronic effect and then recombine efficiently, leading to the better carrier reservoir effect and higher hole injection in LEDs. As a result, by inserting multiple HRLs in the EBL region instead of single HRL, the experimental external quantum efficiency is enhanced by 19.8%, while the serious droop ratio is markedly suppressed from 37.0% to 27.6% at the high current injection of 100 A/cm{sup 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Jet formation in GRBs: a semi-analytic model of MHD flow in Kerr geometry with realistic plasma injection

We construct a semi-analytic model for magnetohydrodynamic (MHD) flows in Kerr geometry that incorporates energy loading via neutrino annihilation on magnetic field lines threading the horizon. We compute the structure of the double-flow established in the magnetisphere for a wide range of energy injection rates and identify the different operation regimes. At low injection rates, the outflow is powered by the spinning black hole via the Blandford-Znajek mechanism, whereas at high injection rates, it is driven by the pressure of the plasma deposited on magnetic field lines. In the intermediate regime, both processes contribute to the outflow formation. The parameter that quantifies the load is the ratio of the net power injected below the stagnation radius and the maximum power that can be extracted magnetically from the black hole.

79 ASTRONOMY AND ASTROPHYSICS↗

Momentum injection by supernovae in the interstellar medium

Supernova (SN) explosions deposit prodigious energy and momentum in their environments, with the former regulating multiphase thermal structure and the latter regulating turbulence and star formation rates in the interstellar medium (ISM). However, systematic studies quantifying the impact of SNe in realistic inhomogeneous ISM conditions have been lacking. Using three-dimensional hydrodynamic simulations, we investigate the dependence of radial momentum injection on both physical conditions (considering a range of mean density n{sub 0} = 0.1–100 cm{sup −3}) and numerical parameters. Our inhomogeneous simulations adopt two-phase background states that result from thermal instability in atomic gas. Although the supernova remnant (SNR) morphology becomes highly complex for inhomogeneous backgrounds, the radial momentum injection is remarkably insensitive to environmental details. For our two-phase simulations, the final momentum produced by a single SN is given by 2.8×10{sup 5} M{sub ⊙} km s{sup −1}n{sub 0}{sup −0.17}. This is only 5% less than the momentum injection for a homogeneous environment with the same mean density, and only 30% greater than the momentum at the time of shell formation. The maximum mass in hot gas is also quite insensitive to environmental inhomogeneity. Strong magnetic fields alter the hot gas mass at very late times, but the momentum injection remains the same. Initial experiments with multiple spatially correlated SNe show a momentum per event nearly as large as single-SN cases. We also present a full numerical parameter study to assess convergence requirements. For convergence in the momentum and other quantities, we find that the numerical resolution Δ and the initial size of the SNR r{sub init} must satisfy Δ,r{sub init}<r{sub sf}/3, where the shell formation radius is given by r{sub sf}=30 pc n{sub 0}{sup −0.46} for two-phase models (or 30% smaller for a homogeneous medium).

79 ASTRONOMY AND ASTROPHYSICS↗

Cosmological constraints on exotic injection of electromagnetic energy

We compute cosmic microwave background (CMB) anisotropy constraints on exotic forms of energy injection in electromagnetic (e.m.) channels over a large range of timescales. We show that these constraints are very powerful around or just after recombination, although CMB keeps some sensitivity e.g. to decaying species with lifetimes as long as 10{sup 25} s. These bounds are complementary to CMB spectral distortions and primordial nucleosynthesis ones, which dominate at earlier timescales, as we also review here. For the first time, we describe the effects of the e.m. energy injection on the CMB power spectra as a function of the injection epoch , using the lifetime of a decaying particle as proxy. We also identify a suitable on-the-spot approximation, that can be used to derive accurate constraints, and describe its differences with the most up-to-date treatment. Our results are of interest not only for early universe relics constituting (a fraction of) the dark matter, but also for other exotic injection of e.m. radiation. For illustration, we apply our formalism to: i) Primordial black holes of mass 10{sup 13.5} g ∼< M ∼< 10{sup 16.8} g, showing that the constraints are comparable to the ones obtained from gamma-ray background studies and even dominate below ∼ 10{sup 14} g. ii) To a peculiar mass-mixing range in the sterile neutrino parameter space, complementary to other astrophysical and laboratory probes. iii) Finally, we provide a first estimate of the room for improvement left for forthcoming 21 cm experiments, comparing it with the reach of proposed CMB spectral distortion (PiXiE) and CMB angular power spectrum (CORE) missions. We show that the best and most realistic opportunity to look for this signal (or to improve over current constraints) in the 21 cm probe is to focus on the Cosmic Dawn epoch, 15 ∼< z ∼< 30, where the qualitatively unambiguous signature of a spectrum in emission can be expected for models that evade all current constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulation of DIII-D disruption with argon pellet injection and runaway electron beam

Abstract The next generation of large tokamaks, including ITER, will be equipped with a disruption mitigation system (DMS) that can be activated if a disruption is deemed to be imminent. Introducing impurities by pellet (large or shattered) or massive gas injection has been shown to be an effective mitigation mechanism on many tokamaks. The goal of the mitigation is to lessen the thermal and electromagnetic loads from the disruption without generating enough high-energy (runaway) electrons to damage the device. Variations of this mitigation process with impurity injection are presently being tested on many experiments. We have modeled one such impurity injection experiment on DIII-D using the M3D-C1 nonlinear 3D extended MHD code (Jardin et al 2012 Comput. Sci. Discovery 6 014002), The model includes an argon large pellet injection and ablation model, impurity ionization, recombination, and radiation, and runaway electron formation and subsequent evolution, including both Dreicer and avalanche sources. We obtain reasonable agreement with the experimental results for the timescale of the thermal and current quench and for the magnitude of the runaway electron plateau formed during the mitigation. This is the first 3D full MHD simulation with pellets and REs to simulate the disruption process and it also provides a partial validation of the M3D-C1 DMS model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-Ray Characterization of Real Fuel Sprays for Gasoline Direct Injection

Here, the effects of fuel blend properties on spray and injector performance has been investigated in a side-mount injector for gasoline direct injection (GDI) using two certification fuel blends: Euro 5 and Euro 6. Several X-ray diagnostic techniques were conducted to characterize the injector and spray morphology. Detailed internal geometry of the GDI injector was resolved to 1.8 μm, through the use of hard X-ray tomography. The geometry characterization of this six-hole GDI, side mount injector, quantifies relevant hole and counterbore dimensions and reveals the intricate details within the flow passages, including surface roughness and micron-sized features. Internal valve motion was measured with a temporal resolution of 20 μs and a spatial resolution of 2.0 μs, for three injection pressures and several injector energizing strategies. The needle motion for both fuels exhibits similar lift profiles for common energizing commands. A combination of X-ray radiography and ultra-small-angle X-ray scattering (USAXS) was used to characterize the fuel mass distribution and the droplet sizing, respectively. Tomographic spray radiography revealed the near-nozzle distribution of fuel mass for each of the fuels and the asymmetry produced by the angled nozzles. Under evaporative conditions, the two fuels show minor differences in peak fuel mass distribution during steady injection, though both exhibit fluctuations in injection during the early, transient phase. USAXS measurements of the path-specific surface area of the spray indicated lower peak values for the more evaporative conditions in the near nozzle region.

09 BIOMASS FUELS↗

Interindividual variability of arterial impulse response to intravenous injection of nonionic contrast agent (Iohexol) in DCE-CT study

Purpose: It is known that the arterial input function (AIF) in dynamic contrast-enhanced (DCE)-CT differs among patients even for fixed contrast injection protocols. Therefore, a study has been performed to investigate the interindividual variability of the AIF with respect to patient factors (such as weight, height, and age). In addition, it has been demonstrated that the relations from the interindividual variability investigation can be further used for the estimation of AIF for a patient without the requirement of measurement. Methods: DCE-CT data for a cohort of 34 patients with cervical carcinoma were used for the investigation of interindividual variability of the AIF. To dissociate the effect of different durations of contrast injection, the arterial impulse response (AIR) to intravenous contrast injection was calculated and examined for its correlations with these patient factors. An empirical functional form was proposed to model the AIR with temporal intensity of a first pass of contrast agent followed by recirculation and quasiequilibrium state of contrast concentration. Specific features (onset time, peak time, and amplitudes) of the AIR were tested for correlations with the patient factors. Linear regression was applied to cases that show significant strong correlation between the AIR amplitudes and patient factors. The results were then used to predict the AIR for any given patient based on the patient factors. It was shown that using the predicted AIR, the AIF of the patient can be estimated without the requirement of measurement given the injection protocol is known. The method of AIF estimation was tested in DCE-CT data from another group of 14 patients. The efficacy of individually estimated AIF on pharmacokinetic analysis was assessed against the use of measured AIF and population-averaged AIF as the latter is another possible strategy for AIF generation if AIF measurement is not available. Results: It was found that the amplitudes of AIR postonset time were significantly correlated with patient bodyweight at most time points (r<-0.44, P<0.01) except 8-17 s (P>0.01). When the adiabatic tissue homogeneity (ATH) and the Kety models were applied to the pharmacokinetic analysis, the mean percentage errors in kinetic parameter estimates induced by using the estimated AIF instead of the measured one for both models ranged from -4.98% to 11.19%. Conclusions: It was found that there are strong linear relationships between AIR and patient weight; thereby the AIR of a patient can be estimated with patient weight. The proposed method of AIF estimation is potentially applicable in cases where AIF measurement is not possible.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Study of plasma heating in discharges with neutral beam injection in the Globus-M spherical tokamak

Results from experimental studies on the injection of high-energy neutral hydrogen beams into the plasma of the Globus-M spherical tokamak are reviewed. In the Introduction, the importance of these studies for implementing the controlled fusion research program and constructing the ITER tokamak is proved. Some problems related to the use of neutral beam injection in small and low-aspect-ratio tokamaks is analyzed. Results are presented from numerical simulations of the experiment by using the ASTRA transport code. It is shown that the use of neutral beam injection in the Globus-M tokamak ensures efficient ion heating and increases the plasma stored energy. The greater part of the review is devoted to the survey of experiments on the injection of 22-to 30-keV hydrogen and deuterium beams with a power of 0.4-0.8 MW into the plasma of the Globus-M spherical tokamak in a wide range of plasma currents and densities. The experimental results are analyzed and compared with the results of numerical simulations. The achievement of top plasma parameters is highlighted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Injection-induced terahertz electroluminescence from silicon p–n structures

Injection-induced terahertz electroluminescence from silicon p{sup +}–n structures is observed at helium temperatures. Structures fabricated by the diffusion of boron into a phosphorus-doped n-Si substrate are studied. Relatively narrow luminescence lines are observed in the luminescence spectra against a broad smooth background. The spectral position of a number of emission lines corresponds to optical transitions between excited donor states and the ground state of phosphorus donors. The intracenter optical transitions of electrons at phosphorus donors are excited as a result of recombination processes occurring in the n-type region of the structure under the injection of nonequilibrium holes. A number of other lines in the terahertz emission spectra are associated with intracenter transitions at acceptor centers, which are also excited as a result of injection. The structureless background in the electroluminescence spectra may be due to terahertz emission upon the intraband energy relaxation of “hot” carriers having an effective temperature exceeding the lattice temperature. These “hot” carriers appear in the structure under injection conditions.

36 MATERIALS SCIENCE↗

Initial Results from Boron Powder Injection Experiments in WEST Lower Single Null L-mode Plasmas

Using a recently installed impurity powder dropper (IPD), boron powder (< 150 μm) was injected into lower single null (LSN) L-mode discharges in WEST. IPDs possibly enable real-time wall conditioning of the plasma-facing components and may help to facilitate H-mode access in the full-tungsten environment of WEST. The discharges in this experiment featured Ip = 0.5 MA, BT = 3.7 T, q95 = 4.3, tpulse = 12–30 s, ne,0 ~ 4×1019 m-2, and PLHCD ~ 4.5 MW. Estimates of the deuterium and impurity particle fluxes, derived from a combination of visible spectroscopy measurements and their corresponding S/XB coefficients, showed decreases of ~ 50% in O+, N+, and C+ populations during powder injection and a moderate reduction of these low-Z impurities (~ 50%) and W (~ 10%) in the discharges that followed powder injection. Along with the improved wall conditions, WEST discharges with B powder injection observed improved confinement, as the stored energy WMHD, neutron rate, and electron temperature Te increased significantly (10–25% for WMHD and 60–200% for the neutron rate) at constant input power. These increases in confinement scale up with the powder drop rate and are likely due to the suppression of ion temperature gradient (ITG) turbulence from changes in Zeff and/or modifications to the electron density profile.

Boronization↗

Correlation of nanoparticle size distribution features to spatiotemporal flame luminosity in gasoline direct injection engines

Particle size distribution measured by mobility instruments is a common diagnostic used to characterize ultrafine and nanoparticle emissions in engine exhaust; however, some features of particle size distribution data are poorly correlated to in-cylinder combustion phenomena. In this work, in-cylinder spatiotemporal flame luminosity is quantitatively correlated to features in the solid particle size distribution measured in the exhaust of a gasoline direct injection engine operating in lean and stoichiometric combustion modes. A multi-channel optical sensor was used to measure diffusion flame light intensity in different areas of the combustion chamber. Furthermore, total solid particle number and particle size distribution in the exhaust were measured using a scanning mobility particle sizer after a catalytic stripper that removed semi-volatile compounds. Results of the experiments showed that different flame phenomenon resulted in distinct particle size distribution characteristics. A large accumulation mode (particles with diameter of 50–100 nm) in the particle size distribution from stoichiometric engine operation with early injection resulted from anomalous diffusion flames like piston-top pool fires. In lean operation incorporating a secondary fuel injection, particle emissions were dominated by flame propagation through fuel-rich regions of the combustion chamber resulting in a comparatively broad particle size distribution. More generally, this work illustrates how particle size distribution data can be more accurately used to diagnose soot formation in gasoline direct injection engines.

33 ADVANCED PROPULSION SYSTEMS↗

Sorption-induced permeability change of coal during gas-injection processes

Our study has two features. First, laboratory experiments measured the change of the permeability of coal samples as a function of pore pressure and injected-gas composition at constant effective stress. Second, adsorption-solution theory described adsorption equilibria and aided interpretation. The gases tested include pure methane (CH{sub 4}), nitrogen (N{sub 2}), and carbon dioxide (CO{sub 2}), as well as binary mixture of N{sub 2} and CO{sub 2} of different compositions. The coal pack was initially dry and free of gas, then saturated by each test gas at a series of increasing pore pressures at a constant effective stress until steady state was reached, Thus the amount Of adsorption varied, while the effective stress was held constant. Results show that, (I) permeability decreases with an increase of pore pressure at fixed injection-gas composition, and, (ii) permeability change is a function of the injected-gas composition. As the concentration of CO{sub 2} in the injection gas increases, the permeability of the coal decreases. Pure CO{sub 2} leads to the greatest permeability reduction among all the test gases. However, 10 to 20% by mole of N{sub 2} helps to preserve permeability significantly. According to the mixed-gas adsorption isotherms, adsorption and the selectivity of a particular gas species on coal surfaces is a function of pressure and the gas composition. Therefore, we conclude that loading coal surfaces with adsorbed gas at constant effective stress causes permeability reduction. Finally, gas adsorption and permeability of coal are correlated, simply to extend the usefulness of study results.

01 COAL, LIGNITE, AND PEAT↗

Validation of New Process Models for Large Injection-Molded Long-Fiber Thermoplastic Composite Structures

This report describes the work conducted under the CRADA Nr. PNNL/304 between Battelle PNNL and Autodesk whose objective is to validate the new process models developed under the previous CRADA for large injection-molded LFT composite structures. To this end, the ARD-RSC and fiber length attrition models implemented in the 2013 research version of Moldflow was used to simulate the injection molding of 600-mm x 600-mm x 3-mm plaques from 40% glass/polypropylene (Dow Chemical DLGF9411.00) and 40% glass/polyamide 6,6 (DuPont Zytel 75LG40HSL BK031) materials. The injection molding was performed by Injection Technologies, Inc. at Windsor, Ontario (under a subcontract by Oak Ridge National Laboratory, ORNL) using the mold offered by the Automotive Composite Consortium (ACC). Two fill speeds under the same back pressure were used to produce plaques under slow-fill and fast-fill conditions. Also, two gating options were used to achieve the following desired flow patterns: flows in edge-gated plaques and in center-gated plaques. After molding, ORNL performed measurements of fiber orientation and length distributions for process model validations. The structure of this report is as follows. After the Introduction (Section 1), Section 2 provides a summary of the ARD-RSC and fiber length attrition models. A summary of model implementations in the latest research version of Moldflow is given in Section 3. Section 4 provides the key processing conditions and parameters for molding of the ACC plaques. The validations of the ARD-RSC and fiber length attrition models are presented and discussed in Section 5. The conclusions will be drawn in Section 6.

36 MATERIALS SCIENCE↗

Injection Overmolding of Continuous Carbon Fiber Preforms

This project explored and developed a process to injection overmold continuous carbon fiber preforms fabricated with tailored fiber placement. Much early work was focused on the ability to infuse dry carbon fiber tow, fully wetting out the fibers, in an injection molding process. Various approaches were explored, including using commingled fiber and pre-consolidated flexible preforms. The commingled fiber was a blend of carbon fiber and polymer fiber matching the injecting polymer. This approach showed some merit but required an extremely high quality homogeneous mixing of the polymer fibers with the carbon fibers to wet out the carbon fiber tow. Therefore, the project focused on pre-consolidated preforms. The pre-consolidated preform manufacturing method was first developed using compression molded flat plates that were cut into tensile specimen for testing. Work then progressed to an injection molded simplified corner fitting bracket. It was shown that a viable manufacturing method for overmolding continuous carbon fiber preforms could be developed.

36 MATERIALS SCIENCE↗

Industrial Compositional Streamline Simulation for Efficient and Accurate Prediction of Gas Injection and WAG Processes

Gas-injection processes are widely and increasingly used for enhanced oil recovery (EOR). In the United States, for example, EOR production by gas injection accounts for approximately 45% of total EOR production and has tripled since 1986. The understanding of the multiphase, multicomponent flow taking place in any displacement process is essential for successful design of gas-injection projects. Due to complex reservoir geometry, reservoir fluid properties and phase behavior, the design of accurate and efficient numerical simulations for the multiphase, multicomponent flow governing these processes is nontrivial. In this work, we developed, implemented and tested a streamline based solver for gas injection processes that is computationally very attractive: as compared to traditional Eulerian solvers in use by industry it computes solutions with a computational speed orders of magnitude higher and a comparable accuracy provided that cross-flow effects do not dominate. We contributed to the development of compositional streamline solvers in three significant ways: improvement of the overall framework allowing improved streamline coverage and partial streamline tracing, amongst others; parallelization of the streamline code, which significantly improves wall clock time; and development of new compositional solvers that can be implemented along streamlines as well as in existing Eulerian codes used by industry. We designed several novel ideas in the streamline framework. First, we developed an adaptive streamline coverage algorithm. Adding streamlines locally can reduce computational costs by concentrating computational efforts where needed, and reduce mapping errors. Adapting streamline coverage effectively controls mass balance errors that mostly result from the mapping from streamlines to pressure grid. We also introduced the concept of partial streamlines: streamlines that do not necessarily start and/or end at wells. This allows more efficient coverage and avoids the redundant work generally done in the near-well regions. We improved the accuracy of the streamline simulator with a higher order mapping from pressure grid to streamlines that significantly reduces smoothing errors, and a Kriging algorithm is used to map from the streamlines to the background grid. The higher accuracy of the Kriging mapping means that it is not essential for grid blocks to be crossed by one or more streamlines. The higher accuracy comes at the price of increased computational costs, but allows coarser coverage and so does not generally increase the overall costs of the computations. To reduce errors associated with fixing the pressure field between pressure updates, we developed a higher order global time-stepping method that allows the use of larger global time steps. Third-order ENO schemes are suggested to propagate components along streamlines. Both in the two-phase and three-phase experiments these ENO schemes outperform other (higher order) upwind schemes. Application of the third order ENO scheme leads to overall computational savings because the computational grid used can be coarsened. Grid adaptivity along streamlines is implemented to allow sharp but efficient resolution of solution fronts at reduced computational costs when displacement fronts are sufficiently separated. A correction for Volume Change On Mixing (VCOM) is implemented that is very effective at handling this effect. Finally, a specialized gravity operator splitting method is proposed for use in compositional streamline methods that gives an effective correction of gravity segregation. A significant part of our effort went into the development of a parallelization strategy for streamline solvers on the next generation shared memory machines. We found in this work that the built-in dynamic scheduling strategies of OpenMP lead to parallel efficiencies that are comparable to optimal schedules obtained with customized explicit load balancing strategies as long as the ratio of number of streamlines to number of threads is sufficiently high, which is the case in real-field applications. This is an important result, as it eases the transition of serial to parallel streamline codes. The parallel speedup itself depends on the relative contribution of the tracing and mapping stages as compared to the solution of the transport equations along streamlines. As the physical complexity of the simulated 1D transport process increases, the contribution of the less efficient tracing and mapping stages is reduced and near-linear scalabilities can be obtained. Our work clearly shows that the owner approach, in which threads are assigned whole streamlines, is more attractive than a distributed model, in which streamline segments are assigned to threads, because it allows re-use of existing sequential code for the 1D streamline solves, also for implicit time-stepping algorithms.

02 PETROLEUM↗

Ducted Fuel Injection versus Conventional Diesel Combustion: An Operating-Parameter Sensitivity Study Conducted in an Optical Engine with a Four-Orifice Fuel Injector

Ducted fuel injection (DFI) has been shown to attenuate engine-out soot emissions from diesel engines. The concept is to inject fuel through a small tube within the combustion chamber to enable lower equivalence ratios at the autoignition zone, relative to conventional diesel combustion. Previous experiments have demonstrated that DFI enables significant soot attenuation relative to conventional diesel combustion for a small set of operating conditions at relatively low engine loads. This is the first study to compare DFI to conventional diesel combustion over a wide range of operating conditions and at higher loads (up to 8.5 bar gross indicated mean effective pressure) with a four-orifice fuel injector. This study compares DFI to conventional diesel combustion through sweeps of intakeoxygen mole fraction (XO 2 ), injection duration, intake pressure, start of combustion (SOC) timing, fuel-injection pressure, and intake temperature. DFI is shown to curtail engine-out soot emissions at all tested conditions. Under certain conditions, DFI can attenuate engine-out soot by over a factor of 100. In addition to producing significantly lower engine-out soot emissions, DFI enables the engine to be operated at low-NO x conditions that are not feasible with conventional diesel combustion due to high soot emissions.

42 ENGINEERING↗

Combined Experimental/Numerical Study of the Soot Formation Process in a Gasoline Direct-Injection Spray in the Presence of Laser-Induced Plasma Ignition

Here, combustion issued from an eight-hole, direct-injection spray was experimentally studied in a constant-volume pre-burn combustion vessel using simultaneous high-speed diffused back-illumination extinction imaging (DBIEI) and OH* chemiluminescence. DBIEI has been employed to observe the liquid-phase of the spray and to quantitatively investigate the soot formation and oxidation taking place during combustion. The fuel-air mixture was ignited with a plasma induced by a single-shot Nd:YAG laser, permitting precise control of the ignition location in space and time. OH* chemiluminescence was used to track the high-temperature ignition and flame. The study showed that increasing the delay between the end of injection and ignition drastically reduces soot formation without necessarily compromising combustion efficiency. For long delays between the end of injection and ignition (1.9 ms) soot formation was eliminated in the main downstream charge of the fuel spray. However, poorly atomized and large droplets formed at the end of injection (dribble) eventually do form soot near the injector even when none is formed in the main charge. The quantitative soot measurements for these spray and ignition scenarios, resolved in time and space, represents a significant new achievement. Reynolds-averaged Navier-Stokes (RANS) simulations were performed to assess spray mixing and combustion. An analysis of the predicted fuel-air mixture in key regions, defined based upon experimental observations, was used to explain different flame propagation speeds and soot production tendencies when varying ignition timing. The mixture analysis indicates that soot production can be avoided if the flame propagates into regions where the equivalence ratio (Φ) is already below 2. Reactive RANS simulations have also been performed, but with a poor match against the experiment, as the flame speed and heat-release rate are largely over estimated. This modeling weakness appears related to a very high level of turbulent viscosity predicted for the high-momentum spray in the RANS simulations, which is an important consideration for modeling ignition and flame propagation in mixtures immediately created by the spray.

42 ENGINEERING↗