Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ionic Conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Local electrical degradations of solid-state electrolyte by nm-scale operando imaging of ionic and electronic transports

We report on degradation mechanisms of solid-state electrolyte (SSE) based on insights from nm-scale ionic conduction and electronic leakage for solid-state batteries. The significantly different local degradations revealed by nm-scale ionic and electronic transport imaging demonstrate the need for this nm-scale investigation. State-of-the-art lithium-ion conductive glass ceramic (Li 2 O–Al 2 O 3 –SiO 2 –P 2 O5–TiO2-GeO2) SSE shows at least two types of degradations spatially separated within the SSE, namely: (1) ionic conduction blocking and slight electronic leaking and (2) highly electronic shunting. Degradation was significantly suppressed by application of a Li-containing polyacrylonitrile thin coating on both sides of the ceramic SSE. With this coating, the ionic conduction was not reduced by the extensive cycling; instead, it improved slightly, although accompanied by a slight increase in electronic leaking. Our nm-scale transport imaging was achieved using an atomic force microscopy (AFM)-based half-cell setup and a logarithmic-scale amplifier with current sensitivity down to the fA (10-15 A) range. This half-cell setup consisting of an AFM-probe/SSE/Li structure can distinguish the ionic from the electronic current by flipping the bias-voltage polarity. This nm-scale operando imaging opens up novel characterization of ionic and electronic transport in the field of solid-state batteries.

42 ENGINEERING↗

Structure Control of a π-Conjugated Oligothiophene-Based Liquid Crystal for Enhanced Mixed Ion/Electron Transport Characteristics

Developing soft materials with both ion and electron transport functionalities is of broad interest for energy-storage and bioelectronics applications. Rational design of these materials requires a fundamental understanding of interactions between ion and electron conducting blocks along with the correlation between the microstructure and the conduction characteristics. Here, we investigate the structure and mixed ionic/electronic conduction in thin films of a liquid crystal (LC) 4T/PEO4, which consists of an electronically conducting quarterthiophene (4T) block terminated at both ends by ionically conducting oligoethylenoxide (PEO4) blocks. Using a combined experimental and simulation approach, 4T/PEO4 is shown to self-assemble into smectic, ordered, or disordered phases upon blending the materials with the ionic dopant bis(trifluoromethane)sulfonimide lithium (LiTFSI) under different LiTFSI concentrations. Interestingly, at intermediate LiTFSI concentration, ordered 4T/PEO4 exhibits an electronic conductivity as high as 3.1 × 10 –3 S/cm upon being infiltrated with vapor of the 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) molecular dopant while still maintaining its ionic conducting functionality. This electronic conductivity is superior by an order of magnitude to the previously reported electronic conductivity of vapor co-deposited 4T/F4TCNQ blends. Furthermore, our findings demonstrate that structure and electronic transport in mixed conduction materials could be modulated by the presence of the ion transporting component and will have important implications for other more complex mixed ionic/electronic conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Free-Energy Calculations. A Mathematical Perspective

Ion channels are pore-forming assemblies of transmembrane proteins that mediate and regulate ion transport through cell walls. They are ubiquitous to all life forms. In humans and other higher organisms they play the central role in conducting nerve impulses. They are also essential to cardiac processes, muscle contraction and epithelial transport. Ion channels from lower organisms can act as toxins or antimicrobial agents, and in a number of cases are involved in infectious diseases. Because of their important and diverse biological functions they are frequent targets of drug action. Also, simple natural or synthetic channels find numerous applications in biotechnology. For these reasons, studies of ion channels are at the forefront of biophysics, structural biology and cellular biology. In the last decade, the increased availability of X-ray structures has greatly advanced our understanding of ion channels. However, their mechanism of action remains elusive. This is because, in order to assist controlled ion transport, ion channels are dynamic by nature, but X-ray crystallography captures the channel in a single, sometimes non-native state. To explain how ion channels work, X-ray structures have to be supplemented with dynamic information. In principle, molecular dynamics (MD) simulations can aid in providing this information, as this is precisely what MD has been designed to do. However, MD simulations suffer from their own problems, such as inability to access sufficiently long time scales or limited accuracy of force fields. To assess the reliability of MD simulations it is only natural to turn to the main function of channels - conducting ions - and compare calculated ionic conductance with electrophysiological data, mainly single channel recordings, obtained under similar conditions. If this comparison is satisfactory it would greatly increase our confidence that both the structures and our computational methodologies are sufficiently accurate. Channel conductance, defined as the ratio of ionic current through the channel to applied voltage, can be calculated in MD simulations by way of applying an external electric field to the system and counting the number of ions that traverse the channel per unit time. If the current is small, a voltage significantly higher than the experimental one needs to be applied to collect sufficient statistics of ion crossing events. Then, the calculated conductance has to be extrapolated to the experimental voltage using procedures of unknown accuracy. Instead, we propose an alternative approach that applies if ion transport through channels can be described with sufficient accuracy by the one-dimensional diffusion equation in the potential given by the free energy profile and applied voltage. Then, it is possible to test the assumptions of the equation, recover the full voltage/current dependence, determine the reliability of the calculated conductance and reconstruct the underlying (equilibrium) free energy profile, all from MD simulations at a single voltage. We will present the underlying theory, model calculations that test this theory and simulations on ion conductance through a channel that has been extensively studied experimentally. To our knowledge this is the first case in which the complete, experimentally measured dependence of the current on applied voltage has been reconstructed from MD simulations.

free energy↗

Demonstration of Temperature Compensation Techniques for SPNDs Operating in High Temperatures

This report presents the testing results of rhodium-based self-powered neutron detectors (Rh-SPND) irradiated in a furnace dry tube from ambient temperature to 850°C at the Ohio State University Research Reactor. The purpose of the experiment is to demonstrate the technique and application of a temperature compensation technique for the Rh-SPND. This is performed by characterizing the temperature effects observed in past experiments—a displacement current and a stabilized dark current—of the Rh-SPND as a function of temperature under the models of shifting space charges as a product of photoconductivity properties. Low-power irradiation at the OSURR was performed with stabilized temperatures of ambient, 550, 575, 600, 625, 650, 675, and 700°C were first performed to obtain the curve fit parameters that describes the temperature effects. The results provided further insight for the behavior of the SPND at high temperatures in accordance with available insulation conductivity models. Transition points from photoconductivity to ionic conductivity were identified in the range of 550–600°C. Additionally, transition points ionic to electric conductivity were observed in the range of 675–700°C, however, the data was not able to fully capture the transition and did not have enough resolution to provide predictive compensation based only on temperature readings.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Highly Conductive Iodine and Fluorine Dual-Doped Argyrodite Solid Electrolyte for Lithium Metal Batteries

Sulfide-type argyrodite solid electrolytes (SEs) with halide doping have attracted serious interest. Although other halides such as Cl and Br have been found to enhance Li-ion transport in argyrodites, the direct synthesis of efficiently conductive Li 6 PS 5 I without postprocessing has rarely been investigated. In this work, we report the one-step synthesis of highly conductive Li 6 PS 5 I with an impressive ionic conductivity of 2.5 × 10 –4 S cm –1 at room temperature through a solvent-based method. Moreover, by introducing F – to partially replace I – , hybrid-doped argyrodites Li 6 PS 5 F x I 1–x (x = 0.25, 0.5, 0.75) have been synthesized. Li 6 PS 5 F 0.25 I 0.75 achieves the highest conductivity of 3.5 × 10 –4 S cm –1 due to the energetic preference for anion-disordering among F – /I – and S 2– , which facilitate faster Li transport as supported by density functional theory (DFT) calculations. With higher F content in argyrodites, Li 6 PS 5 F 0.75 I 0.25 displays the best electrochemical stability toward Li metal, as evidenced by long-term stable cycling in Li symmetric cells up to 1100 h. Solid-state Li metal batteries with an active cathode of Li 4 Ti 5 O 12 (LTO) display an initial specific capacity of 140 mAh g –1 and remain at 105 mAh g –1 after 200 cycles, suggesting great battery cycling performance. Furthermore, this research has developed new compositions in the argyrodite SE family which could lead to advancements in the development of solid-state Li metal batteries.

25 ENERGY STORAGE↗

Nanoscale Effects on Oxygen Ion Conductance in Oxide Electrolytes

This chapter describes the results from a project that aimed to develop an understanding of oxygen ionic transport processes in oxide nanostructured materials that may enable the design of new types of electrolyte materials for electrochemical device applications with enhanced ionic conductivity that function well at low temperatures. Increased ionic transport at low temperatures would simply allow the use of a wide range of lower-cost materials for electrochemical devices. Interface-controlled nucleation and growth of two- and three-dimensional, nanostructured materials show unique physical, chemical and electronic properties that are different from bulk materials due to quantum confinement and other effects occurring at the nanoscale. Atomic and ionic transport, which is crucial for many technological applications including catalysis and fuel-cell technology, is also expected to be enhanced in nanostructured materials due to effects related to size, electronic structure, space charge and multiple interface pathways. We have investigated the fundamental scientific issues associated with oxygen ionic transport properties of multilayer, single- and poly-crystalline nano-oxide film structures on suitable substrates. We have taken advantage of our ability to grow and characterize single-crystal, pure and doped multilayer, nanoscale materials, using state-of-the-art capabilities at the Environmental Molecular Sciences Laboratory (EMSL). Detail description of the results from the investigations of thin films with nanodomains, with interfaces parallel to the substrate surfaces and with interfaces perpendicular to the substrate surfaces is discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Dynamics and relaxation of charge carriers in poly(methylmethacrylate)-lithium salt based polymer electrolytes plasticized with ethylene carbonate

In this paper, we have studied the dynamics and relaxation of charge carriers in poly(methylmethacrylate)-lithium salt based polymer electrolytes plasticized with ethylene carbonate. Structural and thermal properties have been examined using X-ray diffraction and differential scanning calorimetry, respectively. We have analyzed the complex conductivity spectra by using power law model coupled with the contribution of electrode polarization at low frequencies and high temperatures. The temperature dependence of the ionic conductivity and crossover frequency exhibits Vogel-Tammann-Fulcher type behavior indicating a strong coupling between the ionic and the polymer chain segmental motions. The scaling of the ac conductivity indicates that relaxation dynamics of charge carriers follows a common mechanism for all temperatures and ethylene carbonate concentrations. The analysis of the ac conductivity also shows the existence of a nearly constant loss in these polymer electrolytes at low temperatures and high frequencies. The fraction of free anions and ion pairs in polymer electrolyte have been obtained from the analysis of Fourier transform infrared spectra. It is observed that these quantities influence the behavior of the composition dependence of the ionic conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proton conduction and chemical stability of (La{sub 0.5}Sr{sub 0.5})(Mg{sub 0.5+y}Nb{sub 0.5-y})O{sub 3-{delta}}

Electrical conduction properties of complex perovskite-type oxides in the (La{sub 0.5}Sr{sub 0.5})(Mg{sub 0.5+y}Nb{sub 0.5-y})O{sub 3-{delta}} (y = 0.02-0.06) series at intermediate-high temperatures were investigated; introduction of protons by hydration of oxide-ion vacancies was expected by increasing the Mg/Nb ratio from unity. The conductivity depended on y and a maximum conductivity was obtained at y = 0.04: {sigma} = 4.9 x 10{sup -6} S cm{sup -1} at 400 deg. C in wet H{sub 2} atmospheres. From electromotive force measurements of hydrogen and water vapor concentration cells, electrical conduction in wet H{sub 2} atmospheres can be attributed to ionic conduction, and proton conduction is dominant below 700 deg. C. Unlike other perovskite-type proton conductors, (La{sub 0.5}Sr{sub 0.5})(Mg{sub 0.54}Nb{sub 0.46})O{sub 3-{delta}} was stable in CO{sub 2} atmospheres even in the low-intermediate temperature region due to dilution of reactive strontium by lanthanum.

36 MATERIALS SCIENCE↗

Synthesis and electrochemical assessment of Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} ceramics and derived composite electrolytes

Highlights: • Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} prepared for the first time through solid state reaction. • High energy milling needed to assist the ceramic route. • Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} is oxide-ion conductor in air and n-type conductor at low pO{sub 2}. • Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} decomposes slightly when exposed to alkaline carbonates. • Composites based on Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} show standard electrical performance. - Abstract: Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} was prepared for the first time through high temperature (1600 °C for 5 h) solid state reaction, after high energy milling to enhance the mechano-chemical interaction of precursor oxides (CeO{sub 2} and Yb{sub 2}O{sub 3}). Single phase formation was confirmed by powder X-ray diffraction. Impedance spectroscopy data obtained under wide temperature (300–800 °C) and oxygen partial pressure (0.21 to about 10{sup −25} atm) ranges indicates that this material exhibits predominant oxide-ion conductivity under oxidizing conditions while n-type electronic conductivity prevails at low oxygen partial pressure. The mixed oxide shows modest ionic conductivity (1.1 × 10{sup −3} S cm{sup −1} at 800 °C) with activation energy of 1.3 eV in the 600–800 °C temperature range. When combined with molten carbonates (Li{sub 2}CO{sub 3} + Na{sub 2}CO{sub 3}, 1:1 molar ratio) to produce composite electrolytes, Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} slightly decomposed. However, the composite electrical performance is still acceptable and closely matches the conductivity of similar materials (>0.1 S cm{sup −1} immediately above 500 °C)

36 MATERIALS SCIENCE↗

Ab initio simulation of the equation of state and kinetics of shocked water

We report herein first principles simulations of water under shock loading of pressures from ca. 9 - 69 GPa. Accurate description of the chemical mechanism for the ionic conductivity at high pressures and temperatures is of particular importance to models of the planetary dynamo mechanism in Neptune and Uranus. Using a novel simulation technique for shock compression, we are able to make excellent comparison to the experimental results for the Hugoniot pressure, temperature and density final states. Our simulations resolve controversy regarding the molecular mechanism for electric conduction at high pressures along the shock Hugoniot. At the approximate intersection of the Hugoniot and Neptune isentrope we observe high concentrations of negatively charges species that contribute electronic states near the band gap. Our results provide a microscopic picture of the chemistry in planetary interiors, which could impact models of Neptune and Uranus. This work was supported by the US Department of Energy's Office of Basic Energy Sciences' Chemical Sciences program. Battelle operates Pacific Northwest National Laboratory for the US Department of Energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and Characterization of Li4Ti5O12 Anode Materials with Enhanced High-Rate Performance in Lithium-Ion Batteries

ABSTRACT Li 4 Ti 5 O 12 (LTO) represents a promising anode material for lithium ion batteries, however, it suffers from limitations associated with poor intrinsic electron conductivity as well as moderate ionic conductivity. Hence, to achieve the goal of creating LTO anodes with improved high-rate performance, we have put forth a number of targeted fundamental strategies. Herein we discuss the roles of controllably tuning (i) morphology, (ii) attachment modalities of carbon, and (iii) ion doping of the LTO material. In addition, we also demonstrated in situ studies of lithiation-driven structural transformations in LTO via a combination of X-ray absorption spectroscopy and ab initio calculations, which have been proven to be powerful tools to probe the negligible volume change and extraordinary stability of LTO upon repeated charge/discharge cycles.

energy storage (including batteries and capacitors↗

Double-membrane triple-electrolyte redox flow battery design

A redox flow battery is provided having a double-membrane (one cation exchange membrane and one anion exchange membrane), triple-electrolyte (one electrolyte in contact with the negative electrode, one electrolyte in contact with the positive electrode, and one electrolyte positioned between and in contact with the two membranes). The cation exchange membrane is used to separate the negative or positive electrolyte and the middle electrolyte, and the anion exchange membrane is used to separate the middle electrolyte and the positive or negative electrolyte. This design physically isolates, but ionically connects, the negative electrolyte and positive electrolyte. The physical isolation offers great freedom in choosing redox pairs in the negative electrolyte and positive electrolyte, making high voltage of redox flow batteries possible. The ionic conduction drastically reduces the overall ionic crossover between negative electrolyte and positive one, leading to high columbic efficiency.

25 ENERGY STORAGE↗

Interfacial control of oxygen vacancy doping and electrical conduction in thin film oxide heterostructures

Systems and methods of reversibly controlling the oxygen vacancy concentration and distribution in oxide heterostructures consisting of electronically conducting In2O3 films grown on ionically conducting Y2O3-stabilized ZrO2 substrates. Oxygen ion redistribution across the heterointerface is induced using an applied electric field oriented in the plane of the interface, resulting in controlled oxygen vacancy (and hence electron) doping of the film and possible orders-of-magnitude enhancement of the film's electrical conduction. The reversible modified behavior is dependent on interface properties and is attained without cation doping or changes in the gas environment in contact with the sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructured Crystals of Fluorite Phases Sr{sub 1–x}R{sub x}F{sub 2+x} and Their Ordering: 12. Influence of Structural Ordering on the Fluorine-Ion Conductivity of Sr{sub 0.667}R{sub 0.333}F{sub 2.333} Alloys (R = Tb or Tm) at Their Annealing

The ionic conductivity of Sr{sub 0.667}R{sub 0.333}F{sub 2.333} alloys (rational Sr{sub 2}RF{sub 7} compositions) in SrF{sub 2}–RF{sub 3} systems (R = Tb or Tm), prepared by spontaneous crystallization, has been investigated for the “as-grown” state and after annealing in CF{sub 4} at 900 ± 20°C for 96 h. As-grown samples of both compositions, prepared by fast (200°C/min) melt crystallization, exhibit partial (nonequilibrium) ordering, which increases from Tb to Tm. Annealing of Sr{sub 0.667}R{sub 0.333}F{sub 2.333} alloys yields strong ordering (equilibrium for the annealing temperatures) of the fluorite structure (CaF{sub 2} type, sp. gr. Fm3̅m, Z = 4) at the formation of t-Sr{sub 2}RF{sub 7} tetragonal compound (sp. gr. I4/m, Z = 30). It is established that ordering of the alloy fluorite structure reduces the fluorine-ion conductivity. After the annealing, the conductivity of Sr{sub 0.667}R{sub 0.333}F{sub 2.333} alloys with the initial (nonequilibrium) ordering stage of t-Sr{sub 2}RF{sub 7} phases with almost complete (equilibrium) ordering decreases by a factor of 3–4.5.

36 MATERIALS SCIENCE↗

Interface modulated currents in periodically proton exchanged Mg doped lithium niobate

Conductivity in Mg doped lithium niobate (Mg:LN) plays a key role in the reduction of photorefraction and is therefore widely exploited in optical devices. However, charge transport through Mg:LN and across interfaces such as electrodes also yields potential electronic applications in devices with switchable conductivity states. Furthermore, the introduction of proton exchanged (PE) phases in Mg:LN enhances ionic conductivity, thus providing tailorability of conduction mechanisms and functionality dependent on sample composition. To facilitate the construction and design of such multifunctional electronic devices based on periodically PE Mg:LN or similar ferroelectric semiconductors, fundamental understanding of charge transport in these materials, as well as the impact of internal and external interfaces, is essential. In order to gain insight into polarization and interface dependent conductivity due to band bending, UV illumination, and chemical reactivity, wedge shaped samples consisting of polar oriented Mg:LN and PE phases were investigated using conductive atomic force microscopy. In Mg:LN, three conductivity states (on/off/transient) were observed under UV illumination, controllable by the polarity of the sample and the externally applied electric field. Measurements of currents originating from electrochemical reactions at the metal electrode–PE phase interfaces demonstrate a memresistive and rectifying capability of the PE phase. Furthermore, internal interfaces such as domain walls and Mg:LN–PE phase boundaries were found to play a major role in the accumulation of charge carriers due to polarization gradients, which can lead to increased currents. The insight gained from these findings yield the potential for multifunctional applications such as switchable UV sensitive micro- and nanoelectronic devices and bistable memristors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-regulating surface chemistry for more robust highly durable solid oxide fuel cell cathodes

In this project we explored the possibility of mitigating silicon poisoning of Pr doped ceria (PCO) electrodes for oxygen reduction in SOFC. The approach was to dope PCO with various amount of lanthanum and study the new compositions in terms of their mixed conduction properties, their oxygen surface exchange kinetics, as well as their resistance to silicon poisoning. The effects of lanthanum doping on the transport properties and oxygen exchange kinetics of La x (Ce 0.9 Pr 0.1 ) 1-x O 2-δ (x=0, 0.1 and 0.2) have been investigated by electrical conductivity on bulk samples and optical relaxation on thin films respectively. Lanthanum substitution was observed to increase the magnitude of ionic conductivity to values comparable to that of single substituted La x Ce 1-x O 2-δ , with a maximum for a La content of x = 0.1, reaching σ = 9.5×10 -3 S·cm -1 at 600 °C and a decrease in activation energy from ≈ 1 eV for Ce 0.9 Pr 0.1 O 2-δ down to ≈ 0.75 eV for the lanthanum substituted compositions. At the same time, a significant electronic contribution to the total conductivity, estimated to be on the order of 10%, supports significant mixed ionic-electronic conductivity.

08 HYDROGEN↗