Search NASA⌕ Search

SEARCH · Search NASA

Results for “LOGARITHM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

A parametric study of slow dynamic nonlinear elasticity with comparisons to models

Several phenomenological models that aspire to quantitative description of anomalous nonlinear mesoscopic elasticity are reviewed and compared with laboratory measurements. This class of nonlinearity, best known perhaps for slow dynamics and aging, is seen widely in imperfectly consolidated granular solids but is not well understood. Typical slow dynamic tests show that a modest conditioning oscillatory "pump" strain depresses material stiffness, which then recovers like the logarithm of time after conditioning ceases. Several phenomenological models based on physical arguments have been proposed that predict the material stiffness response to arbitrary pump strain histories during conditioning and recovery. Approximate closed form and numerical solutions to the models are presented that predict the quantitative influence of three key pump parameters: the pump's strain amplitude, the pump's strain rate, and the pump’s duration. Laboratory measurements on Berea sandstone, concrete and a confined single aluminum bead find that slow dynamic responses are linear in pump strain and independent of pump frequency. Measurements also show that, after pump-off, stiffness recovers over times far longer than the pump duration. These observations and others are compared to model predictions. One of the considered models, based on a picture of fast brittle damage and slow healing, successfully matches all these behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Physics-guided logistic classification for tool life modeling and process parameter optimization in machining

This paper describes a physics-guided logistic classification method for tool life modeling and process parameter optimization in machining. Tool life is modeled using a classification method since the exact tool life cannot be measured in a typical production environment where tool wear can only be directly measured when the tool is replaced. Here, in this study, laboratory tool wear experiments are used to simulate tool wear data normally collected during part production. Two states are defined: tool not worn (class 0) and tool worn (class 1). The non-linear reduction in tool life with cutting speed is modeled by applying a logarithmic transformation to the inputs for the logistic classification model. A method for interpretability of the logistic model coefficients is provided by comparison with the empirical Taylor tool life model. The method is validated using tool wear experiments for milling. Results show that the physics-guided logistic classification method can predict tool life using limited datasets. A method for pre-process optimization of machining parameters using a probabilistic machining cost model is presented. The proposed method offers a robust and practical approach to tool life modeling and process parameter optimization in a production environment.

Machine learning↗
DOE OSTI2011

Microstructural Characterization and Pore Structure Analysis of Nuclear Graphite

Graphite will be used as a structural and moderator material in next-generation nuclear reactors. While the overall nature of the production of nuclear graphite is well understood, the historic nuclear grades of graphite are no longer available. This paper reports the virgin microstructural characteristics of filler particles and macro-scale porosity in virgin nuclear graphite grades of interest to the Next Generation Nuclear Plant program. Optical microscopy was used to characterize filler particle size and shape as well as the arrangement of shrinkage cracks. Computer aided image analysis was applied to optical images to quantitatively determine the variation of pore structure, area, eccentricity, and orientation within and between grades. The overall porosity ranged between {approx}14% and 21%. A few large pores constitute the majority of the overall porosity. The distribution of pore area in all grades was roughly logarithmic in nature. The average pore was best fit by an ellipse with aspect ratio of {approx}2. An estimated 0.6-0.9% of observed porosity was attributed to shrinkage cracks in the filler particles. Finally, a preferred orientation of the porosity was observed in all grades.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2012

Computer Simulations of Interstitial Loop Growth Kinetics in irradiated bcc Fe

The growth kinetics of (001) [001] interstitial loops in bcc Fe is studied by phase-field modeling. The effect of defect (vacancy/interstitial) concentration, generation, recombination, sink strength, and elastic interaction on the growth kinetics of interstitial loops is systematically simulated. Results show that the elastic interaction between the defects and interstitial loops speeds up the growth kinetics and affects the morphology of the interstitial loops. Linear growth rate, i.e., the loop average radius is linear to time, under both aging and irradiation are predicted, which is in agreement with experimental observation. The results also show that the interstitial loop growth rate, which is directly related to the sink strength of the interstitial loop for interstitials, increases linearly with the initial interstitial concentration during aging while changing logarithmically with the interstitial generation rate under irradiation.

growth kinetics↗
DOE OSTI2024

Determining reference standard strength for neutron-irradiated reduced activation ferritic/martensitic steel F82H by Bayesian method

The deterministic approach widely adopted in the design of structural components relies on systematically defined design limits using empirically determined safety factors. However, this approach is not always appropriate because structures are subjected to a variety of loads in the practical environment, which may result in excessively conservative design limits. In recent years, a more rigorous probabilistic approach that incorporates material strength distributions has become an important solution. In the probabilistic approach, the probability density functions of material strength properties underpin the design criteria. Here, the objective of this study is to identify the density distribution functions that best describe tensile properties of irradiated F82H to define a reference strength for DEMO design. Due to the limited number of existing data, this study specifically employs a Bayesian prediction method based on Monte Carlo simulations to determine a material reference value with statistical reliability and to investigate its effectiveness. For example, the dependence of tensile properties of 300 °C irradiated materials on irradiation damage and the range predicted by 95% Bayesian estimation was evaluated. As a statistical model for the dose dependence of statistical parameters, the normal distribution exhibited a better fit for 0.2% proof strength and tensile strength, whereas the distribution of total elongation data gave comparable reference values for both the normal and Weibull distribution models. Both models gave comparable criteria for the distribution of total elongation data. The Weibull model also gave better results for uniform elongation. The function best describing the model was a logarithmic law for both 0.2% proof strength and tensile strength, while a power law for both total and uniform elongation, which allowed for more comprehensive data prediction of irradiation data with statistical accuracy for DEMO reactor design.

36 MATERIALS SCIENCE↗
DOE OSTI2011

New insights in the polarization resistance of anode-supported solid oxide fuel cells with La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 cathodes

In this study, the polarization resistance of the La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) solid oxide fuel cell (SOFC) cathode was investigated by I-V sweep and electrochemcial impedance spectroscopy under a series of dc bias voltages and cathode environments (i.e. stagnant air, flowing air, and flowing oxygen) at temperatures from 550 to 750 °C. In flowing oxygen, the polarization resistance of the fuel cell decreased considerably with the applied current density. A linear relationship was observed between the ohmic-free over-potential and the logarithm of the current density of the fuel cell at all the measuring temperatures. In stagnant or flowing air, a new arc related to the molecular oxygen diffusion in the pores of the cathode was identified at high temperatures and high current densities. The magnitude of this arc increased with the applied current density due to the decreased oxygen partial pressure at the interface of the cathode and the electrolyte. It is found that the performance of the fuel cell in air is mainly determined by the oxygen diffusion process. Elimination of this process by flowing oxygen to the cathode improved the cell performance significantly. At 750 °C, for a fuel cell with a laser-deposited Sm 0.2 Ce 0.8 O 1.9 (SDC) interlayer, an extraordinarily high power density of 2.6 W cm -2 at 0.7 V was achieved in flowing oxygen, as a result of reduced ohmic and polarization resistance of the fuel cell, which were 0.06 Ω cm 2 and 0.03 Ω cm 2 , respectively. The results indicate that optimization of the microstructure of the LSCF cathode or adoption of a new cell design which can mitigate the diffusion problem in the cathode might enhance cell performance significantly.

concentration polarization↗
DOE OSTI2020

Local electrical degradations of solid-state electrolyte by nm-scale operando imaging of ionic and electronic transports

We report on degradation mechanisms of solid-state electrolyte (SSE) based on insights from nm-scale ionic conduction and electronic leakage for solid-state batteries. The significantly different local degradations revealed by nm-scale ionic and electronic transport imaging demonstrate the need for this nm-scale investigation. State-of-the-art lithium-ion conductive glass ceramic (Li 2 O–Al 2 O 3 –SiO 2 –P 2 O5–TiO2-GeO2) SSE shows at least two types of degradations spatially separated within the SSE, namely: (1) ionic conduction blocking and slight electronic leaking and (2) highly electronic shunting. Degradation was significantly suppressed by application of a Li-containing polyacrylonitrile thin coating on both sides of the ceramic SSE. With this coating, the ionic conduction was not reduced by the extensive cycling; instead, it improved slightly, although accompanied by a slight increase in electronic leaking. Our nm-scale transport imaging was achieved using an atomic force microscopy (AFM)-based half-cell setup and a logarithmic-scale amplifier with current sensitivity down to the fA (10-15 A) range. This half-cell setup consisting of an AFM-probe/SSE/Li structure can distinguish the ionic from the electronic current by flipping the bias-voltage polarity. This nm-scale operando imaging opens up novel characterization of ionic and electronic transport in the field of solid-state batteries.

42 ENGINEERING↗
DOE OSTI2014

Two proton-conductive hybrids based on 2-(3-pyridyl)benzimidazole molecules and Keggin-type heteropolyacids

Two proton-conductive organic/inorganic complexes were constructed by Keggin-type heteropolyacids and 2-(3-pyridyl)benzimidazole molecules. Single-crystal X-ray diffraction analyses revealed that two complexes crystallized in the monoclinic space group P2{sub 1}/c, exhibited different unit cell parameters, and presented different hydrogen-bonded networks constructed by 2-(3-pyridyl)benzimidazole molecules, [PMo{sub 12}O{sub 40}]{sup 3−} anions and solvent molecules. The results of thermogravimetric analyses suggest that two supramolecular complexes have different thermal stability based on the different hydrogen-bonded networks. Two complexes at 100 °C under 35–98% relative humidity showed a good proton conductivity of about 10{sup −3} S cm{sup −1}. The proton conductivities of two complexes under 98% relative humidity both increase on a logarithmic scale with temperature range from 25 to 100 °C. At 100 °C, both complexes showed poor proton conductivities of 10{sup −8}–10{sup −9} S cm{sup −1} under acetonitrile or methanol vapor. - Graphical abstract: Two molecular hybrids constructed by Keggin-type heteropolyacids and 2-(3-pyridyl)benzimidazole molecules showed good proton conductivities of 10{sup −3} S cm{sup −1} at 100 °C under 35–98% relative humidity. Display Omitted - Highlights: • 2-(3-Pyridyl)benzimidazole could form hydrogen bonds via the N–H groups. • Heteropolyacids have suitable characteristics to be used excellent proton conductors. • Two proton-conductive hybrids based on Keggin HPAs and 3-PyBim were constructed. • The structures were determined by using single-crystal X-ray diffraction data. • They showed good proton conductivities of 10{sup −3} S cm{sup −1} at 100 °C under 35–98% RH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

The effects of burial diagenesis on multiscale porosity in the St. Peter Sandstone: An imaging, small-angle, and ultra-small-angle neutron scattering analysis

To examine the effects of burial diagenesis on heirarchical pore structures in sandstone and compare those with the effects of overgrowth formation, we obtained samples of St. Peter Sandstone from drill cores obtained in the Illinois and Michigan Basins. The multiscale pore structure of rocks in sedimentary reservoirs and the mineralogy associated with those pores are critical factors for estimating reservoir properties, including fluid mass in place, permeability, and capillary pressures, as well as geochemical interactions between the rock and the fluid. The combination of small- and ultra-small-angle neutron scattering with backscattered electron or X ray-computed tomographic imaging, or both, provided a means by which pore structures were quantified at scales ranging from aproximately 1 nm to 1 cm—seven orders of magnitude. Larger scale (>10 µm) porosity showed the expected logarithmic decrease in porosity with depth, although there was significant variation in each sample group. However, small- and ultra-small-angle neutron scattering data showed that the proportion of small-scale porosity increased with depth. Porosity distributions were not continuous, but consisted of a series of log normal-like distributions at several distinct scales within these rocks. Fractal dimensions at larger scales decreased (surfaces smoothed) with increasing depth, and those at smaller scales increased (surfaces roughened) and pores become more isolated (higher lacunarity). Furthermore, data suggest that changes in pore-size distributions are controlled by both physical (compaction) and chemical effects (precipitation, cementation, dissolution).

58 GEOSCIENCES↗
DOE OSTI2015

Hot deformation characterization of duplex low-density steel through 3D processing map development

The high temperature deformation behavior of duplex low-density Fe–18Mn–8Al–0.8C steel was investigated at temperatures in the range of 600–1000 °C. The primary constitutive analysis indicated that the Zener–Hollomon parameter, which represents the coupled effects of temperature and strain rate, significantly varies with the amount of deformation. Accordingly, the 3D processing maps were developed considering the effect of strain and were used to determine the safe and unsafe deformation conditions in association with the microstructural evolution. The deformation at efficiency domain I (900–1100 °C\10{sup −} {sup 2}–10{sup −} {sup 3} s{sup −} {sup 1}) was found to be safe at different strains due to the occurrence of dynamic recrystallization in austenite. The safe efficiency domain II (700–900 °C\1–10{sup −} {sup 1} s{sup −} {sup 1}), which appeared at logarithmic strain of 0.4, was characterized by deformation induced ferrite formation. Scanning electron microscopy revealed that the microband formation and crack initiation at ferrite\austenite interphases were the main causes of deformation instability at 600–800 °C\10{sup −} {sup 2}–10{sup −} {sup 3} s{sup −} {sup 1}. The degree of instability was found to decrease by increasing the strain due to the uniformity of microbanded structure obtained at higher strains. The shear band formation at 900–1100 °C\1–10{sup −} {sup 1} s{sup −} {sup 1} was verified by electron backscattered diffraction. The local dynamic recrystallization of austenite and the deformation induced ferrite formation were observed within shear-banded regions as the results of flow localization. - Graphical abstract: Display Omitted - Highlights: • The 3D processing map is developed for duplex low-density Fe–Mn–Al–C steel. • The efficiency domains shrink, expand or appear with increasing strain. • The occurrence of DRX and DIFF increases the power efficiency. • Crack initiation at α/γ interphase and shear banding lead to failure.

36 MATERIALS SCIENCE↗
DOE OSTI2015

A comparison of phantom scatter from flattened and flattening filter free high-energy photon beams

Flattening filter free (FFF) photon beams have different dosimetric properties from those of flattened beams. The aim of this work was to characterize the collimator scatter (S{sub c}) and total scatter (S{sub cp}) from 3 FFF beams of differing quality indices and use the resulting mathematical fits to generate phantom scatter (S{sub p}) data. The similarities and differences between S{sub p} of flattened and FFF beams are described. S{sub c} and S{sub cp} data were measured for 3 flattened and 3 FFF high-energy photon beams (Varian 6 and 10 MV and Elekta 6 MV). These data were fitted to logarithmic power law functions with 4 numerical coefficients. The agreement between our experimentally determined flattened beam S{sub p} and published data was within ± 1.2% for all 3 beams investigated and all field sizes from 4 × 4 to 40 × 40 cm{sup 2}. For the FFF beams, S{sub p} was only within 1% of the same flattened beam published data for field sizes between 6 × 6 and 14 × 14 cm{sup 2}. Outside this range, the differences were much greater, reaching − 3.2%, − 4.5%, and − 4.3% for the fields of 40 × 40 cm{sup 2} for the Varian 6-MV, Varian 10-MV, and Elekta 6-MV FFF beams, respectively. The FFF beam S{sub p} increased more slowly with increasing field size than that of the published and measured flattened beam of a similar reference field size quality index, i.e., there is less Phantom Scatter than that found with flattened beams for a given field size. This difference can be explained when the fluence profiles of the flattened and FFF beams are considered. The FFF beam has greatly reduced fluence off axis, especially as field size increases, compared with the flattened beam profile; hence, less scatter is generated in the phantom reaching the central axis.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2022

High-pressure CO 2 permeation properties and stability of ceramic-carbonate dual-phase membranes

CO 2 permeation properties and stability of ceramic-carbonate dual-phase membranes at high pressures/temperatures are critical to their CO 2 separation and membrane reactor applications, but such data are not available in the literature. Here, this work aims to study the effect of high transmembrane pressure on CO 2 permeation flux and the stability of molten carbonate in the dual-phase samarium-doped ceria (SDC) and molten-carbonate (MC) membranes. Dead-end porous SDC tubular supports were made by a cold isostatic press (CIP)/sintering method with a low porosity (below 7%), and gas-tight SDC-MC membranes were prepared by direct infiltration of molten lithium and sodium carbonate mixture into SDC pores, with a MC volume fraction less than 7%. CO 2 permeation/separation tests were performed on the SDC-MC membranes using feed gas of equal molar CO 2 /N 2 mixture at feed pressures up to 15 atm and sweep gas of helium at 1 atm. CO 2 permeation flux for the SDC-MC membranes depends logarithmically on feed/permeate CO 2 pressure ratio in 660–810°C. The temperature dependence of CO 2 permeation shows activation energy of 30 kJ/mol. Due to the small MC volume fraction and hence low effective carbonate conductivity, CO 2 permeation of the SDC-MC membranes is dominated by the carbonate ionic conduction in the MC phase. The SDC-MC membranes remain in the same structure, morphology, and gas-tightness after CO 2 separation tests at high feed pressures and temperatures, showing high stability of SDC-MC membranes for high-temperature, high-pressure separation and chemical reaction applications.

36 MATERIALS SCIENCE↗
DOE OSTI2019

High-energy synchrotron radiation X-ray diffraction measurements during in situ aging of a NiTi-15 at. % Hf high temperature shape memory alloy

NiTiHf high temperature shape memory alloys (HTSMAs) have begun to show considerable progress in their ability to be manufactured and are now on the cusp of becoming viable alloys for use in the aerospace industry, mainly as actuation devices. By aging the alloys at intermediate temperatures between 450 and up to 700 °C, Ni-rich NiTiHf HTSMAs form the H-phase, a Ni-rich nanoscale precipitate which can be used to strengthen the alloy and improve the shape memory response; however, precipitate phase evolution and growth has not yet been studied in-situ nor have the effects of previous thermo-mechanical processing on their formation. In this study, H-phase precipitate formation is observed experimentally in situ during aging of a Ni-rich NiTiHf alloy using high energy synchrotron radiation X-ray diffraction (SR-XRD) measurements. The effects of prior thermo-mechanical treatments, i.e. hot and cold rolling, on its formation rate and coarsening rate are compared. It is shown that growth of the H-phase can be observed in situ using SR-XRD and the H-phase formation rate seems to exhibit linear growth when aging at 550 °C, while increasing the temperature to 650 °C shows a logarithmic trend that plateaus after approximately 1 h of aging. Other properties such as incubation time, austenite lattice strains, texture evolution, and overall comparison between hot and cold rolling are discussed. New potential peak age conditions are suggested based on the diffraction data and evaluated using three-point bending and TEM imaging.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Adding vacuum branching to jet evolution in a dense medium

We study the fragmentation of a jet propagating in a dense quark-gluon plasma. We show that the “vacuum-like” emissions triggered by the parton virtualities can be factorized from the medium-induced radiation responsible for the energy loss within a controlled, “double-logarithmic”, approximation in perturbative QCD. We show that the collisions with the plasma constituents modify the vacuum-like parton shower already at leading twist, in two ways: the radiation phase-space is reduced and the first emission outside the medium can violate angular ordering. We compute the jet fragmentation function and find results in qualitative agreement with measurements at the LHC.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

A complete non-perturbative renormalization prescription for quasi-PDFs

In this work we present, for the first time, the non-perturbative renormalization for the unpolarized, helicity and transversity quasi-PDFs, in an RI' scheme. The proposed prescription addresses simultaneously all aspects of renormalization: logarithmic divergences, finite renormalization as well as the linear divergence which is present in the matrix elements of fermion operators with Wilson lines. Furthermore, for the case of the unpolarized quasi-PDF, we describe how to eliminate the unwanted mixing with the twist-3 scalar operator. We utilize perturbation theory for the one-loop conversion factor that brings the renormalization functions to the $\overline{MS}$-scheme at a scale of 2 GeV. We also explain how to improve the estimates on the renormalization functions by eliminating lattice artifacts. The latter can be computed in one-loop perturbation theory and to all orders in the lattice spacing. We apply the methodology for the renormalization to an ensemble of twisted mass fermions with $N_f = 2+1+1$ dynamical quarks, and a pion mass of around 375 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

On the connection between perturbation theory and new semiclassical expansion in quantum mechanics

Here, it is shown that for the one-dimensional anharmonic oscillator with potential V(x) = ax 2 + bgx 3 + ... = $\frac{1}{g^2}$ $\hat{V}$ (gx), as well as for the radial oscillator V(r) = $\frac{1}{g^2}$ $\hat{V}$ (gr) and for the perturbed Coulomb problem V(r) = $\frac{a}{r}$ + βgr + ... = g $\tilde{V}$ (gr), the Perturbation Theory in powers of the coupling constant g (weak coupling regime) and the semiclassical expansion in powers of $\hbar$ 1/2 for the energies coincide. This is related to the fact that the dynamics developed in two spaces: x (r)-space and gx (gr)-space, lead to the same energy spectra. The equations which govern dynamics in these two spaces, the Riccati-Bloch equation and the Generalized Bloch equation, respectively, are presented. It is shown that the perturbation theory for the logarithmic derivative of the wavefunction in - space leads to (true) semiclassical expansion in powers of $\hbar$ 1/2 ; for the one-dimensional case this corresponds to the flucton calculus for the density matrix in the path integral formalism in Euclidean (imaginary) time proposed by one of the authors. Matching the perturbation theory in powers of g and the semiclassical expansion in powers of $\hbar$ 1/2 for the wavefunction leads to a highly accurate local approximation in the entire coordinate space, its expectation value for the Hamiltonian provides a prescription for the summation of the perturbative (trans)-series.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Experimental investigation on oil migration and accumulation in tight sandstones

Here, this study presents an experimental investigation to simulate and analyze the physical processes of oil migration and accumulation with 19 tight sandstone cores. Characteristic curves of oil migration were obtained by using the experimental results. It shows that the curve variations were mainly influenced by two factors: the permeability of the core and the viscosity of the injected oil. Based on the experimental results, we introduced three important parameters to quantitatively characterize and determine the processes of oil migration and accumulation in tight sandstones. The apparent permeability was introduced to describe the level of oil migration during experiments. The minimum migration pressure gradient (MMPG) and the terminal oil saturation were proposed to evaluate the features of the beginning and final stages of the migration, respectively. The relationships between MMPG, terminal oil saturation and mobility were analyzed, all showed strong linear relationships in the double logarithmic coordinate system. Furthermore, a prediction map of tight oil accumulation was plotted according to the measured oil saturation data, which could be used for estimating the scale and size of oil accumulation in tight reservoirs. Lastly, the concepts and results in this study provide valuable insight for understanding and quantitatively analyzing the processes of oil migration and accumulation in tight sandstones.

58 GEOSCIENCES↗
DOE OSTI2019

Description of glass transition kinetics in 3D XY model in terms of gauge field theory.

A gauge theory of the glass transition in the frustrated XY model being simplest model containing topologically nontrivial excitations is considered. Investigation of the transition kinetics of this system finds that the three-dimensional system exhibits the Vogel-Fulcher-Tammann criticality going with its freezing into a spin glass. It is analytically shown that the system demonstrates all glass transition properties, like the logarithmic relaxation, and corresponding behaviour of linear and non-linear susceptibility. The mode-coupling theory equation in the Zwanziger-Mori representation also is derived in framework of our approach. The findings provide insights into the topological origin of glass formation, that allows to make progress in understanding glass-transition processes in more intricate systems. (C) 2019 Elsevier B.V. All rights reserved.

gauge field↗