SEARCH · Search NASA

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

All sources NASA NTRS DOE OSTI

NASA NTRS1971

Magnetic materials selection for static inverter and converter transformers

Different magnetic alloys best suited for high-frequency and high-efficiency applications were comparatively investigated together with an investigation of each alloy's inherent characteristics. One of the characteristics in magnetic materials deterimental in transformer design is the residual flux density, which can be additive on turn-on and cause the transformer to saturate. Investigation of this problem led to the design of a transformer with a very low residual flux. Tests were performed to determine the dc and ac magnetic properties at 2400 Hz using square-wave excitation. These tests were performed on uncut cores, which were then cut for comparison of the gapped and ungapped magnetic properties. The optimum transformer was found to be that with the lowest residual flux and a small amount of air gap in the magnetic material. The data obtained from these tests are described, and the potential uses for the materials are discussed.

Mclyman, C. W. T.↗

DOE OSTI2022

Revealing room temperature ferromagnetism in exfoliated Fe 5 GeTe 2 flakes with quantum magnetic imaging

Van der Waals (vdW) material Fe 5 GeTe 2 , with its long-range ferromagnetic ordering near room temperature, has significant potential to become an enabling platform for implementing novel spintronic and quantum devices. To pave the way for applications, it is crucial to determine the magnetic properties when the thickness of Fe 5 GeTe 2 reaches the few-layers regime. However, this is highly challenging due to the need for a characterization technique that is local, highly sensitive, artifact-free, and operational with minimal fabrication. Prior studies have indicated that Curie temperature T C can reach up to close to room temperature for exfoliated Fe 5 GeTe 2 flakes, as measured via electrical transport; there is a need to validate these results with a measurement that reveals magnetism more directly. Here, we investigate the magnetic properties of exfoliated thin flakes of vdW magnet Fe 5 GeTe 2 via quantum magnetic imaging technique based on nitrogen vacancy centers in diamond. Through imaging the stray fields, we confirm room-temperature magnetic order in Fe 5 GeTe 2 thin flakes with thickness down to 7 units cell. The stray field patterns and their response to magnetizing fields with different polarities is consistent with previously reported perpendicular easy-axis anisotropy. Furthermore, we perform imaging at different temperatures and determine the Curie temperature of the flakes at ≈300 K. These results provide the basis for realizing a room-temperature monolayer ferromagnet with Fe 5 GeTe 2 . This work also demonstrates that the imaging technique enables rapid screening of multiple flakes simultaneously as well as time-resolved imaging for monitoring time-dependent magnetic behaviors, thereby paving the way towards high throughput characterization of potential two-dimensional (2D) magnets near room temperature and providing critical insights into the evolution of domain behaviors in 2D magnets due to degradation.

2D magnet↗

DOE OSTI2025

Current Advances in i‐MAX Phases and their Two Dimensional Derivative i‐MXenes: Challenges and Opportunities (Adv. Electron. Mater. 21/2025)

The discovery of quaternary (M′ 2/3 M′′ 1/3 ) 2 AX phases has introduced newly ordered i-MAX phases in the MAX phase community. These atomically layered solids display in-plane chemical ordering of M′ and M′′, featuring a frustrated triangular lattice overlaid on an M′ honeycomb arrangement and an A Kagomé lattice. This unique structure gives rise to novel electronic and magnetic properties, paving the way for diverse applications and the creation of new MXenes. Both experimental and theoretical research have confirmed that these i-MAX phases can be chemically exfoliated into single- or multilayered and vacancy-ordered 2D transition metal carbides, known as i-MXenes. These 2D i-MXenes exhibit intriguing optical, electrochemical, piezoelectric, and magnetic properties, which are decidedly reliant on the surface functional groups (-F, -OH, -O). This review encompasses all available theoretical and experimental studies on i-MAX and i-MXenes, with a focus on their fundamental properties, organized in multiple sections. Along with the experimental investigation, significant attention is also directed toward theoretical predictions of potential i-MAX phases and i-MXenes, including their structural, vibrational, electronic, optical, magnetic, mechanical, piezoelectric, and electrochemical properties. This article provides a comprehensive understanding of vital properties of these materials by providing a review of foundational literature with existing challenges, limitations, and future perspectives.

electrochemical, electronic↗

DOE OSTI2019

Oxygen Vacancy-Induced Room Temperature Ferromagnetism in Rutile TiO{sub 2}

As oxygen vacancies play an important role in ferromagnetism of rutile TiO{sub 2}, a method of γ-ray irradiates rutile TiO{sub 2} single crystals was subtly proposed to study the effect of oxygen vacancies on magnetic properties. Remarkably, room temperature ferromagnetism was observed in γ-ray irradiated rutile TiO{sub 2} single crystals, and the saturation magnetization is the strongest when dose is 4 × 10{sup 4} Gy which assigned to ESR results. Since the displacement threshold energy of Ti atom is much bigger than that of O atom, the defects produced by γ-irradiation are mainly oxygen vacancies. After irradiation, XPS, PL spectra indicate the presence of oxygen vacancies(V{sub O}), Ti{sup 3+}, and V{sub O}-Ti{sup 3+} composite defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Local imaging of diamagnetism in proximity-coupled niobium nanoisland arrays on gold thin films.

In this work, we study the effect of engineered disorder on the local magnetic response of proximity-coupled superconducting island arrays by comparing scanning superconducting quantum interference device (SQUID) susceptibility measurements to a model in which we treat the system as a network of one-dimensional (1D) superconductor-normal-metal-superconductor Josephson junctions, each with a Josephson coupling energy E-J determined by the junction length or distance between islands. We find that the disordered arrays exhibit a spatially inhomogeneous diamagnetic response which, for low local applied magnetic fields, is well described by this junction network model, and we discuss these results as they relate to inhomogeneous 2D superconductors. Our model of the static magnetic response of the arrays does not fully capture the onset of nonlinearity and dissipation with increasing applied field, as these effects are associated with vortex motion due to the dynamic nature of the scanning SQUID susceptometry measurement. This work demonstrates a model 2D superconducting system with engineered disorder, and it highlights the impact of dissipation on the local magnetic properties of 2D superconductors and Josephson junction arrays.

Bishop-Van Horn, Logan↗

NASA NTRS1977

Identification of a ship or submarine from its magnetic signature

The relationship between the measured time fluctuations of the ambient magnetic field due to the passage of a ship or submarine and the characteristic magnetization properties of this vessel are derived. This relationship would be useful in identifying or classifying ships and submarines according to their magnetization properties.

Ioannidis, G.↗

DOE OSTI2020

Solid state grain alignment of permanent magnets in near-final shape

Magnet microstructure manipulation in the solid state by controlled application of a sufficient stress in a direction during high temperature annealing in a single-phase region of heat-treatable magnet alloys, e.g., alnico-type magnets is followed by magnetic annealing and draw annealing to improve coercivity and saturation magnetization properties. The solid-state process can be termed highly controlled abnormal grain growth (hereafter AGG) and will make aligned sintered anisotropic magnets that meet or exceed the magnetic properties of cast versions of the same alloy types.

Anderson, Iver E.↗

DOE OSTI2022

Solid state grain alignment of permanent magnets in near-final shape

Anderson, Iver E.↗

NASA NTRS1973

Magnetic materials selection for static inverter and converter transformers

A program to study magnetic materials is described for use in spacecraft transformers used in static inverters, converters, and transformer-rectifier supplies. Different magnetic alloys best suited for high-frequency and high-efficiency applications were comparatively investigated together with an investigation of each alloy's inherent characteristics. The materials evaluated were the magnetic alloys: (1) 50% Ni, 50% Fe; (2) 79% Ni, 17% Fe, 4% Mo; (3) 48% Ni, 52% Fe; (4) 78% Ni, 17% Fe, 5% Mo; and (5) 3% Si, 97% Fe. Investigations led to the design of a transformer with a very low residual flux. Tests were performed to determine the dc and ac magnetic properties at 2400 Hz using square-wave excitation. These tests were performed on uncut cores, which were then cut for comparison of the gapped and ungapped magnetic properties. When the data of many transformers in many configurations were compiled the optimum transformer was found to be that with the lowest residual flux and a small amount of air gap in the magnetic material. The data obtained from these tests are described, and the potential uses for the materials are discussed.

Mclyman, W. T.↗

DOE OSTI2019

FMR and Magnetic Studies of RF-Sputtered Mn-Zn Ferrite Thin Films

The Manganese–Zinc ferrite (MZF) thin films were deposited on quartz substrates by radio frequency (RF) magnetron sputtering at 10 mTorr of argon gas pressure. The FMR and magnetization measurement were carried out to understand magnetic properties of the as-deposited and annealed MZF films. The resonance field (H{sub r}) of the FMR spectra shifts towards higher magnetic field when angle between applied field and thin film plane is changed from 0 to 90° indicating the existence of uniaxial anisotropy in the film. Whereas, H{sub r} shifts towards lower magnetic field with decrease in temperature of the film. This is due to ferrimagnetic ordering in the films at low temperatures. The magnetization versus field (M-H) plots reveal the soft ferrimagnetic behavior of the films. The post-deposition annealing of the film leads to increase in crystallite size with more uniform film surface and dense columnar growth compared to the as-deposited film. The increase in magnetization and decreases in H{sub r}-values compared to that of as-deposited film are observed for annealed film. The optical band gap of the film is also found to increase with annealing.

36 MATERIALS SCIENCE↗

NASA NTRS1963

Testing of nonmagnetic materials

Measuring magnetic properties of nonmagnetic materials in low magnetic fields

MATERIALS SCIENCE↗

DOE OSTI2018

Phase Transition in a Spin-1/2 and Spin-1 Ising Bilayer Film with Non-magnetic Inter-layers

The phase transition, phase diagrams, and magnetizations of an Ising bilayer film with non-magnetic inter-layers are investigated by the use of the effective field theory with correlations. The system is consisted of two magnetic layers where upper and lower layers are consisted of spin-1/2 atoms and spin-1 atoms with a single-ion anisotropy. It is examined how the system may exhibit the tricritical behavior and some characteristic features of ferrimagnetism. The effects of non-magnetic layers on the magnetic properties are clarified.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Spin-lattice model for cubic crystals

In this work, we present a methodology based on the Néel model to build a classical spin-lattice Hamiltonian for cubic crystals capable of describing magnetic properties induced by the spin-orbit coupling like magnetocrystalline anisotropy and anisotropic magnetostriction, as well as exchange magnetostriction. Taking advantage of the analytical solutions of the Néel model, we derive theoretical expressions for the parametrization of the exchange integrals and Néel dipole and quadrupole terms that link them to the magnetic properties of the material. This approach allows us to build accurate spin-lattice models with the desired magnetoelastic properties. We also explore a possible way to model the volume dependence of magnetic moment based on the Landau energy. This feature allows us to consider the effects of hydrostatic pressure on the saturation magnetization. We apply this method to develop a spin-lattice model for BCC Fe and FCC Ni, and we show that it accurately reproduces the experimental elastic tensor, magnetocrystalline anisotropy under pressure, anisotropic magnetostrictive coefficients, volume magnetostriction, and saturation magnetization under pressure at zero temperature. This work could constitute a step towards large-scale modeling of magnetoelastic phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Probing spin waves in Co 3 O 4 nanoparticles for magnonics applications

The magnetic properties of spinel nanoparticles can be controlled by synthesizing particles of a specific shape and size. The synthesized nanorods, nanodots and cubic nanoparticles have different crystal planes selectively exposed on the surface. The surface effects on the static magnetic properties are well documented, while their influence on spin waves dispersion is still being debated. Our ability to manipulate spin waves using surface and defect engineering in magnetic nanoparticles is the key to designing magnonic devices. We synthesized cubic and spherical nanoparticles of a classical antiferromagnetic material Co 3 O 4 to study the shape and size effects on their static and dynamic magnetic proprieties. Using a combination of experimental methods, we probed the magnetic and crystal structures of our samples and directly measured spin wave dispersions using inelastic neutron scattering. We found a weak, but unquestionable, increase in exchange interactions for the cubic nanoparticles as compared to spherical nanoparticle and bulk powder reference samples. Interestingly, the exchange interactions in spherical nanoparticles have bulk-like properties, despite a ferromagnetic contribution from canted surface spins.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Influence of Particle Size on the Spin Pinning Effect in the fcc-FePt Nanoparticles

In this work, the Fe{sub 60}Pt{sub 40} nanoparticles were synthesized through the chemical reduction method by using the Fe(CO){sub 5} and the Pt(acac){sub 2} as the metallic precursor. The particle size of the synthesized FePt nanoparticles was controlled by adjusting the reaction conditions involving of the Fe(CO){sub 5}-injecting temperature and the soak time of reaction. The structure, morphology, and magnetic properties of the synthesized FePt nanoparticles were characterized by XRD, TEM, and vibrating sample magnetometer (VSM), respectively. The synthesized nanoparticles exhibit uniform size and good dispersity. The magnetization behaviors indicate that the nanoparticles present the core-shell magnetic structure including the ferromagnetic core part and the spin-disorder shell part. There exists a spin pinning effect of the shell part on the core part. The increase of particle size weakens the spin pinning effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2019

Determining the anisotropy and exchange parameters of polycrystalline spin-1 magnets

Abstract Although low-dimensional S = 1 antiferromagnets remain of great interest, difficulty in obtaining high-quality single crystals of the newest materials hinders experimental research in this area. Polycrystalline samples are more readily produced, but there are inherent problems in extracting the magnetic properties of anisotropic systems from powder data. Following a discussion of the effect of powder-averaging on various measurement techniques, we present a methodology to overcome this issue using thermodynamic measurements. In particular we focus on whether it is possible to characterise the magnetic properties of polycrystalline, anisotropic samples using readily available laboratory equipment. We test the efficacy of our method using the magnets [Ni(H 2 O) 2 (3,5-lutidine) 4 ](BF 4 ) 2 and Ni(H 2 O) 2 (acetate) 2 (4-picoline) 2 , which have negligible exchange interactions, as well as the antiferromagnet [Ni(H 2 O) 2 (pyrazine) 2 ](BF 4 ) 2 , and show that we are able to extract the anisotropy parameters in each case. The results obtained from the thermodynamic measurements are checked against electron-spin resonance and neutron diffraction. We also present a density functional method, which incorporates spin–orbit coupling to estimate the size of the anisotropy in [Ni(H 2 O) 2 (pyrazine) 2 ](BF 4 ) 2 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Tunable polar distortions and magnetism in Gd 𝑥 ⁢La 1−𝑥 ⁢PtSb epitaxial films

Hexagonal 𝐴⁢𝐵⁢𝐶 intermetallics are predicted to have tunable ferroelectric, topological, and magnetic properties as a function of the polar buckling of 𝐵⁢𝐶 atomic planes. Here, we report the impact of isovalent lanthanide substitution on the buckling, structural phase transitions, and electronic and magnetic properties of Gd 𝑥 ⁢La 1−𝑥 ⁢PtSb films grown by molecular beam epitaxy (MBE) on 𝑐 plane sapphire substrates. The Gd 𝑥 ⁢La 1−𝑥 ⁢PtSb films form a solid solution from 𝑥=0 to 𝑥=1 and retain the polar hexagonal structure (𝑃⁢6 3 ⁢𝑚⁢𝑐) out to 𝑥 ≤ 0.95. With increasing 𝑥, the PtSb buckling increases and the out-of-plane lattice constant 𝑐 decreases due to the lanthanide contraction. While hexagonal LaPtSb is a highly conductive polar metal, the carrier density decreases with 𝑥 until an abrupt phase transition to a zero band overlap semimetal is found for cubic GdPtSb at 𝑥=1. The magnetic susceptibility peaks at small but finite 𝑥, which we attribute to Ruderman-Kittel-Kasuya-Yosida (RKKY) coupling between localized 4⁢𝑓 moments, whose concentration increases with 𝑥, and free carriers that decrease with 𝑥. Samples with 𝑥≥0.3 show antiferromagnetic Curie-Weiss behavior and a Neel temperature that increases with 𝑥. The Gd 𝑥 ⁢La 1−𝑥 ⁢PtSb system provides opportunities to dramatically alter the polar buckling and concentration of local 4⁢𝑓 moments.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Tunable magneto-optical properties in MoS 2 via defect-induced exciton transitions

The presence of chalcogen vacancies in monolayer transition metal dichalcogenides (TMDs) leads to excitons with mixed localized-delocalized character and to reduced valley selectivity. Recent experimental advances in defect design in TMDs allow for a close examination of such mixed exciton states as a function of their degree of circular polarization under external magnetic fields, revealing strongly varying defect-induced magnetic properties. A theoretical understanding of these observations and their physical origins demands a predictive, structure-sensitive theory. In this work, we study the effect of chalcogen vacancies on the exciton magnetic properties in monolayer MoS 2 . Using many-body perturbation theory, we show how the complex excitonic picture associated with the presence of defects—with reduced valley and spin selectivity due to hybridized electron-hole transitions—leads to a structurally controllable exciton magnetic response. We find a variety of $\textit{g}$-factors with changing magnitudes and sign depending on the exciton energy and character. Further, our findings suggest a pathway to tune the nature of the excitons—and by that their magneto-optical properties—through defect architecture.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗