Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Development, preparation, and characterization of high-performance superconducting materials for space applications

The preparation of high-temperature superconducting ceramics in bulk form is a major challenge in materials science. The current status of both partial melting and melt quenching techniques, with or without an intermediate powder processing stage, is described in detail, and the problems associated with each of the methods are discussed. Results of studies performed on melt-processed materials are reported and discussed. The discussion places emphasis on magnetization and on other physical properties associated with it, such as critical current density, levitation force, and flux creep. The nature of structural features which give rise to flux pinning, including both small and large defects, is discussed with reference to theoretical considerations. The rates of flux creep and the factors involved in attempting to retard the decay of the magnetization are surveyed.

Thorpe, Arthur N.↗
NASA NTRS1995

Radiation Pressure-Driven Magnetic Disk Winds in Broad Absorption Line Quasi-Stellar Objects

We explore a model in which QSO broad absorption lines (BALS) are formed in a radiation pressure-driven wind emerging from a magnetized accretion disk. The magnetic field threading the disk material is dragged by the flow and is compressed by the radiation pressure until it is dynamically important and strong enough to contribute to the confinement of the BAL clouds. We construct a simple self-similar model for such radiatively driven magnetized disk winds, in order to explore their properties. It is found that solutions exist for which the entire magnetized flow is confined to a thin wedge over the surface of the disk. For reasonable values of the mass-loss rate, a typical magnetic field strength such that the magnetic pressure is comparable to the inferred gas pressure in BAL clouds, and a moderate amount of internal soft X-ray absorption, we find that the opening angle of the flow is approximately 0.1 rad, in good agreement with the observed covering factor of the broad absorption line region.

DeKool, Martin↗
NASA NTRS2006

Particle Acceleration, Magnetic Field Generation and Emission from Relativistic Jets and Supernova Remnants

We performed numerical simulations of particle acceleration, magnetic field generation, and emission from shocks in order to understand the observed emission from relativistic jets and supernova remnants. The investigation involves the study of collisionless shocks, where the Weibel instability is responsible for particle acceleration as well as magnetic field generation. A 3-D relativistic particle-in-cell (RPIC) code has been used to investigate the shock processes in electron-positron plasmas. The evolution of theWeibe1 instability and its associated magnetic field generation and particle acceleration are studied with two different jet velocities (0 = 2,5 - slow, fast) corresponding to either outflows in supernova remnants or relativistic jets, such as those found in AGNs and microquasars. Slow jets have intrinsically different structures in both the generated magnetic fields and the accelerated particle spectrum. In particular, the jet head has a very weak magnetic field and the ambient electrons are strongly accelerated and dragged by the jet particles. The simulation results exhibit jitter radiation from inhomogeneous magnetic fields, generated by the Weibel instability, which has different spectral properties than standard synchrotron emission in a homogeneous magnetic field.

Nishikawa, K.-I.↗
NASA NTRS2021

Detection of an extremely strong magnetic field in the double-degenerate binary merger product HD 144941

HD 144941 is an extreme He (EHe) star, a rare class of subdwarf OB star formed from the merger of two white dwarf (WD) stars. Uniquely amongst EHe stars, its lightcurve has been reported to be modulated entirely by rotation, suggesting the presence of a magnetic field. Here we report the first high-resolution spectropolarimetric observations of HD 144941, in which we detect an extremely strong magnetic field both in circular polarization (with a line-of-sight magnetic field averaged over the stellar disk〈Bz〉 ∼ −8 kG) and in Zeeman splitting of spectral lines (yielding a magnetic modulus of〈B〉 ∼17 kG). We also report for the first time weak Hαemission consistent with an origin an a Centrifugal Magnetosphere (CM). HD 144941’s atmospheric parameters could be consistent with either a subdwarf or a main sequence (MS) star, and its surface abundances are neither similar to other EHe stars nor to He-strong magnetic stars. However, its Hαemission properties can only be reproduced if its mass is around 1 M⊙, indicating that it must be a post-MS object. Since there is no indication of binarity, it is unlikely to be a stripped star, and was therefore most likely produced in a WD merger. HD 144941 is therefore further evidence that mergers area viable pathway for the generation of fossil magnetic fields.

M E Shultz↗
NASA NTRS1996

Characterization of the Dynamic Material Properties of Magnetostrictive Terfenol-D

A major limitation in use of electromagnetic and/or magnetomechanical models for design of Terfenol-D actuators is the lack of reliable material property data for Terfenol-D. In particular data on the performance of Terfenol-D as employed in a transducer, operating under real world dynamic conditions is needed. To provide this information, Terfenol-D rod properties need to be measured under as run prestressed and magnetically biased states. Using a Terfenol-D actuator, the following properties can be measured and/or calculated: mechanical quality factor, speed of sound in the material, the resonant frequency, the anti-resonant frequency, two magnetic permeabilities (one at constant stress and one at constant strain), two Young's moduli (one at constant amplitude applied magnetic field and one at constant amplitude magnetic flux density in the material), the magnetomechanical coupling, and the axial strain coefficient. The development of the material properties measurements and calculations is based on the model of low signal, linear, magnetostriction from Clark, the linear transduction equations for a transducer from Hunt, and a one degree of freedom mechanical model of the transducer. The electrical impedance and admittance mobility loops are used to determine the resonant, anti-resonant, and half power point frequencies. The rest of the material properties indicated above can then be calculated using these frequencies, acceleration from an accelerometer mounted on the actuator arm, and readily measurable transducer and Terfenol-D rod parameters.

Calkins, Frederick T.↗
NASA NTRS1981

Models of the earth's core

Combined inferences from seismology, high-pressure experiment and theory, geomagnetism, fluid dynamics, and current views of terrestrial planetary evolution lead to models of the earth's core with five basic properties. These are that core formation was contemporaneous with earth accretion; the core is not in chemical equilibrium with the mantle; the outer core is a fluid iron alloy containing significant quantities of lighter elements and is probably almost adiabatic and compositionally uniform; the more iron-rich inner solid core is a consequence of partial freezing of the outer core, and the energy release from this process sustains the earth's magnetic field; and the thermodynamic properties of the core are well constrained by the application of liquid-state theory to seismic and labroatory data.

Stevenson, D. J.↗
NASA NTRS1989

The effect of an interaction of magnetic flux and supergranulation on the decay of magnetic plages

This paper studies how the properties of large-scale convection affect the decay of plages. The plage decay, caused by the random-walk dispersion of flux tubes, is suggested to be severely affected by differences between the mean size of cellular openings within and around plages. The smaller cell size within a plage largely explains the smaller diffusion coefficient within plages as compared to that of the surrounding regions. The semipermeability of the plage periphery, together with the dependence of the diffusion coefficient on the flux-tube density, can explain the observed slow decay of plages (predicting a typical life time of about a month for a medium-sized plage), the existence of a well-defined plage periphery, and the observed characteristic mean magnetic flux density of about 100 G. One effect of the slowed decay of the plage by the semipermeability of the plage periphery is the increase of the fraction of the magnetic flux that can cancel with flux of the opposite polarity along the neutral line to as much as 80 percent as compared to at most 50 percent in the case of nonuniform diffusion. This may explain why only a small fraction of the magnetic flux is observed to escape from the plage into the surrounding network.

Schrijver, C. J.↗
NASA NTRS1990

Structure and superconducting properties of ((Ln(1-x)Ln*(x) 1/2 (Ba(1-y)Sr(y) 1/3 Ce 1/6) 8Cu6O(z)

A variety of new oxide superconductors were prepared. The crystallographic structures of the oxides were all tetragonal and of the (Ln(+), Ce)4(Ln(+),Ba)4Cu6Oz (Ln(+) = Nd, Sm or Eu) type which had been previously discovered by Akimitsu et al. As the Sr content, y, increased when Ln = Ln(excited state) = Nd, the oxygen content, z, monotonically increased and the superconducting transition temperature, T(sub c), varied exhibiting a maximum. When z was controlled directly by means of high oxygen pressure sintering techniques, T(sub c) was changed accordingly. T(sub c's) of samples with different combinations of Ln and Ln(excited state) and different values of x and y were found to depend on the magnitude of the bond valence sum for a Cu atom located in the bottom plane of the Cu-O5 pyramid. Transport and magnetization measurements were carried out to investigate the magnetic field dependence of superconducting properties and to determine the phenomenological parameters. The Hall coefficients were positive below room temperature and varied yielding a maximum with respect to temperature.

Yamauchi, H.↗
NASA NTRS1991

Structure and superconducting properties of ((Ln(1-x)Ln*(x) 1/2 (Ba(1-y)Sr(y) 1/3 Ce 1/6)8Cu6O(z)

A variety of new oxide superconductors were prepared. The crystallographic structures of the oxides were all tetragonal and of the (Ln(+),Ce)4(Ln(+),Ba)4Cu6Oz (Ln(+) = Nd, Sm or Eu) type which had been previously discovered by Akimitsu et al. As the Sr content, y, increased when Ln = Ln(excited state) = Nd, the oxygen content, z, monotonically increased and the superconducting transition temperature, T sub c, varied exhibiting a maximum. When z was controlled directly by means of high oxygen pressure sintering techniques, T sub c was changed accordingly. T sub c's of samples with different combinations of Ln and Ln(excited state) and different values of x and y were found to depend on the magnitude of the bond valence sum for a Cu atom located in the bottom plane of the Cu-O5 pyramid. Transport and magnetization measurements were carried out to investigate the magnetic field dependence of superconducting properties and to determine the phenomenological parameters. The Hall coefficients were positive below room temperature and varied yielding a maximum with respect to temperature.

Yamauchi, H.↗
NASA NTRS2015

Near-Surface Plasma Characterization of the 12.5-kW NASA TDU1 Hall Thruster

To advance the state-of-the-art in Hall thruster technology, NASA is developing a 12.5-kW, high-specific-impulse, high-throughput thruster for the Solar Electric Propulsion Technology Demonstration Mission. In order to meet the demanding lifetime requirements of potential missions such as the Asteroid Redirect Robotic Mission, magnetic shielding was incorporated into the thruster design. Two units of the resulting thruster, called the Hall Effect Rocket with Magnetic Shielding (HERMeS), were fabricated and are presently being characterized. The first of these units, designated the Technology Development Unit 1 (TDU1), has undergone extensive performance and thermal characterization at NASA Glenn Research Center. A preliminary lifetime assessment was conducted by characterizing the degree of magnetic shielding within the thruster. This characterization was accomplished by placing eight flush-mounted Langmuir probes within each discharge channel wall and measuring the local plasma potential and electron temperature at various axial locations. Measured properties indicate a high degree of magnetic shielding across the throttle table, with plasma potential variations along each channel wall being less than or equal to 5 eV and electron temperatures being maintained at less than or equal to 5 eV, even at 800 V discharge voltage near the thruster exit plane. These properties indicate that ion impact energies within the HERMeS will not exceed 26 eV, which is below the expected sputtering threshold energy for boron nitride. Parametric studies that varied the facility backpressure and magnetic field strength at 300 V, 9.4 kW, illustrate that the plasma potential and electron temperature are insensitive to these parameters, with shielding being maintained at facility pressures 3X higher and magnetic field strengths 2.5X higher than nominal conditions. Overall, the preliminary lifetime assessment indicates a high degree of shielding within the HERMeS TDU1, effectively mitigating discharge channel erosion as a life-limiting mechanism.

Lifetime↗
NASA NTRS1988

Mass and energy flow near sunspots. I - Observations of moat properties

New measurements of the velocities of moving magnetic features (MMFs) are made from spectroheliograms and filtergrams. The sample includes 200 MMFs found in the moats surrounding 7 different sunspots. Our data are compiled with the data from other authors to uncover common properties of moats. The moat radius is roughly twice the penumbral radius. No significant correlation between the average moat velocity or angular extent and any noted property of the spot or moat (size, age, stage of development) is found. Individual MMFs move radially outward with a constant speed, but nearby MMFs may have quite different speeds. The average moat speed is twice the supergranule flow speed. The speed of MMFs in moats is equal on average to the surface gas flow speed. A large bias is found in much of the existing observations of moat speeds from MMFs.

Brickhouse, Nancy S.↗
NASA NTRS2004

An Extraordinary Magnetic Field Map of Mars

The Mars Global Surveyor spacecraft has completed two Mars years in nearly circular polar orbit at a nominal altitude of 400 km. The Mars crust is at least an order of magnitude more intensely magnetized than that of the Earth [1], and intriguing in both its global distribution and geometric properties [2,3]. Measurements of the vector magnetic field have been used to map the magnetic field of crustal origin to high accuracy [4]. We present here a new map of the magnetic field with an order of magnitude increased sensitivity to crustal magnetization. The map is assembled from > 2 full years of MGS night-side observations, and uses along-track filtering to greatly reduce noise due to external field variations.

Connerney, J. E. P.↗
NASA NTRSDate not supplied

Enabling Intelligent Data Downlink Prioritization of In-Situ Observations through Generalizable and Computationally Inexpensive Anomaly Detection

High-fidelity measurements of magnetic fields and other observed properties, such as energetic particle fluxes, are a necessary component to our understanding of the highly dynamic near-Earth space environment. As our desire to study smaller-scale phenomena such as shocks and dipolorizations has increased, we have been driven to take and telemeter measurements at higher cadences. Unfortunately, many missions are unable to downlink all their captured data due to the well-known data transmission bottleneck at the DSN. These missions must then prioritize their high-cadence data such that the most scientifically useful intervals are transmitted. One simple prioritization technique uses the spacecraft position to telemeter data from only the region of interest. Although easy to implement, this method does not leverage the available scientific data and can omit intervals of useful scientific data when they lie outside the region of interest. The Magnetospheric Multiscale Mission (MMS) uses mission-specific parameterization of several data products to automatically prioritize scientifically useful intervals. Then, MMS verifies the automatically selected intervals by having a domain expert manually select intervals for downlink. The overall complexity required by this technique make it prohibitive for deployment on low-cost platforms (i.e., CubeSats) or on future missions featuring large constellations of satellites such as the Geospace Dynamics Constellation (GDC). We present preliminary results for a simple, generic, and data-driven method of downlink prioritization for magnetic field (and other) measurements. Specifically, Principal Components Analysis (PCA) and One-Class Support Vector Machines (OC-SVMs) are used to detect intervals containing anomalous activity, which can then be prioritized for subsequent downlink. The computational simplicity of this algorithm makes it an excellent candidate for implementation on spaceflight hardware, as well as provide generalizability to a broad range of missions and data products. Initial analysis of this technique has been performed using magnetic field measurements from the Magnetospheric Multiscale Mission and CASSIOP, where it automatically identified scientifically interesting intervals containing Alfvén waves and EMIC activity.

Matthew G. Finley↗
NASA NTRSDate not supplied

Enabling Intelligent Data Downlink Prioritization of In-Situ Observations through Generalizable and Computationally Inexpensive Anomaly Detection

High-fidelity measurements of magnetic fields and other observed properties, such as energetic particle fluxes, are a necessary component to our understanding of the highly dynamic near-Earth space environment. As our desire to study smaller-scale phenomena such as shocks and dipolorizations has increased, we have been driven to take and telemeter measurements at higher cadences. Unfortunately, many missions are unable to downlink all their captured data due to the well-known data transmission bottleneck at the DSN. These missions must then prioritize their high-cadence data such that the most scientifically useful intervals are transmitted. One simple prioritization technique uses the spacecraft position to telemeter data from only the region of interest. Although easy to implement, this method does not leverage the available scientific data and can omit intervals of useful scientific data when they lie outside the region of interest. The Magnetospheric Multiscale Mission (MMS) uses mission-specific parameterization of several data products to automatically prioritize scientifically useful intervals. Then, MMS verifies the automatically selected intervals by having a domain expert manually select intervals for downlink. The overall complexity required by this technique make it prohibitive for deployment on low-cost platforms (i.e., CubeSats) or on future missions featuring large constellations of satellites such as the Geospace Dynamics Constellation (GDC). We present preliminary results for a simple, generic, and data-driven method of downlink prioritization for magnetic field (and other) measurements. Specifically, Principal Components Analysis (PCA) and One-Class Support Vector Machines (OC-SVMs) are used to detect intervals containing anomalous activity, which can then be prioritized for subsequent downlink. The computational simplicity of this algorithm makes it an excellent candidate for implementation on spaceflight hardware, as well as provide generalizability to a broad range of missions and data products. Initial analysis of this technique has been performed using magnetic field measurements from the Magnetospheric Multiscale Mission and CASSIOP, where it automatically identified scientifically interesting intervals containing Alfvén waves and EMIC activity.

Matthew G. Finley↗
NASA NTRS1971

Investigation of space stable thermal control coating properties

A capability to study the nuclear magnetic resonance of spacecraft thermal control coating has been built utilizing an electromagnet and V-series and Wl-series electronics. The electronics associated with the electromagnet had to be modified to make it compatible with the resonance measuring system. Resonance measurements have been performed on ZnO, Zn2TiO4 and FEP Teflon. The failure to observe resonance in ZnO and Zn2TiO4 has been theoretically explained. The linewidth and second moment measurements on ultraviolet irradiated FEP Teflon showed that there was no measurable degradation of the material due to short term irradiation.

Mookherji, T.↗
NASA NTRS1992

A two-dimensional MHD global coronal model - Steady-state streamers

A 2D, time-dependent, numerical, MHD model for the simulation of coronal streamers from the solar surface to 15 solar is presented. Three examples are given; for dipole, quadrupole and hexapole (Legendre polynomials P1, P2, and P3) initial field topologies. The computed properties are density, temperature, velocity, and magnetic field. The calculation is set up as an initial-boundary value problem wherein a relaxation in time produces the steady state solution. In addition to the properties of the solutions, their accuracy is discussed. Besides solutions for dipole, quadrupole, and hexapole geometries, the model use of realistic values for the density and Alfven speed while still meeting the requirement that the flow speed be super-Alfvenic at the outer boundary by extending the outer boundary to 15 solar radii.

Wang, A.-H.↗
NASA NTRS2016

Survey of Galileo Plasma Observations in Jupiter's Plasma Sheet

The plasma science (PLS) Instrument on the Galileo spacecraft (orbiting Jupiter from December 1995 to September 2003) measured properties of the ions that were trapped in the magnetic field. The PLS data provide a survey of the plasma properties between approx. 5 and 30 Jupiter radii [R(sub J)] in the equatorial region. We present plasma properties derived via two analysis methods: numerical moments and forward modeling. We find that the density decreases with radial distance by nearly 5 orders of magnitude from approx. 2 to 3000 cm(exp.-3) at 6R(sub j) to approx. 0.05cm(sub -3) at 30 R(sub j). The density profile did not show major changes from orbit to orbit, suggesting that the plasma production and transport remained constant within about a factor of 2. The radial profile of ion temperature increased with distance which implied that contrary to the concept of adiabatic cooling on expansion, the plasma heats up as it expands out from Io's orbit (where TI is approx.60-80 eV) at approx. 6R(sub j) to a few keV at 30R(sub j).There does not seem to be a long-term, systematic variation in ion temperature with either local time or longitude. This latter finding differs from earlier analysis of Galileo PLS data from a selection of orbits. Further examination of all data from all Galileo orbits suggests that System Ill variations are transitory on timescales of weeks, consistent with the modeling of Cassini Ultraviolet Imaging Spectrograph observations. The plasma flow is dominated by azimuthal flow that is between 80% and 100% of corotation out to 25 R(sub j).

Bagenal, Fran↗