Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETOMETERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Electroplating hard magnetic SmCo for magnetic microactuator applications

Patterned SmCo thin films were electroplated from an aqueous solute containing glycine by using dc and pulse dc current on the beaker level. Micromolds prepared by photolithography allow an accurate pattern transfer for patterned deposition of the material. A flux guide of a magnetic microactuator was chosen as a pattern, and Al{sub 2}O{sub 3} was used as the substrate. Au and Cr were investigated as seed layer materials. The content of Sm in the SmCo films is strongly dependent on the applied cathodic current density. A relative Sm content of up to 13.8 at. % could be determined by energy dispersive x-ray (EDX) spectroscopy. The SmCo thin films were annealed at 560 deg. C in a vacuum oven. Vibrating sample magnetometer (VSM) measurements were applied to characterize the magnetic properties. This film features hard magnetic properties with an intrinsic coercivity H{sub ci} of up to 44 kA/m. Electron probe microanalysis (EPMA) measurements showed that up to 40 at. % of O may be integrated in these films. The phases in the deposited films were determined by applying X-ray diffraction (XRD) measurements. These films consist of a mixture of SmCo alloy, Sm oxide, and Co.

36 MATERIALS SCIENCE↗

A strong magneto-optical activity in rare-earth La{sup 3+} substituted M-type strontium ferrites

M-type strontium ferrites with substitution of Sr{sup 2+} by rare-earth La{sup 3+} were prepared by conventional ceramic technology. The structure, magnetic properties, and magneto-optical Kerr activity of Sr{sub 1-x}La{sub x}Fe{sub 12}O{sub 19} (x = 0, 0.05, 0.10, 0.15, 0.20) were investigated by x-ray diffraction (XRD), vibrating sample magnetometer (VSM), and magneto-optical ellipsometry, respectively. X-ray diffraction showed that the samples sintered at 1290 deg. C for 3 h were single M-type hexagonal ferrites. The magnetic properties were remarkably changed due to the valence change of Fe ions induced by the substitution of La ions. Most significantly, an important magneto-optical activity was induced in the La{sup 3+} substituted M-type strontium ferrites around 3 eV.

36 MATERIALS SCIENCE↗

Magnetic Properties of Electroformed Ni and Ni-Fe for Micromagnetic MEMS Applications

This paper reports a new technique which is based on electroforming process for high permeability Ni and Ni-Fe alloy. The magnetic properties of Ni and Ni-Fe alloy are investigated as a function of plating current density via scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and vibrating sample magnetometer (VSM). Concentration-dependent kinetics is used to formulate the deposition rate and also the same is verified by using finite element analysis tool COMSOL Multiphysics. Several experiments are performed to derive the relation between electroplating parameters and magnetic properties. The process conditions are optimized to develop high permeability (∼16000) Ni-Fe alloy (85.71–14.29 %). The higher current density shows a monotonically increasing behavior of relative permeability (μ{sub r}). In addition, the B-H curves indicate that the saturation magnetization (B{sub sat}) increases and coercivity decreases with increasing plating current density. Our experimental data confirms that the higher current density increase the softness of Ni. The observed properties of Ni and Ni-Fe based on experimental results can be used to study the magnetic behavior of micromagnetic sensors and large force actuators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Magnetic Studies of Nano-crystalline Ferrites MFe{sub 2}O{sub 4} (M = Zn, Ni, Cu, and Co) Synthesized Via Citrate Gel Autocombustion Method

Nano-crystalline ferrites with the chemical formula MFe{sub 2}O{sub 4} (M = Zn, Ni, Cu, and Co) were synthesized via autocombustion route with citric acid as fuel. The ratio of citric acid to metal nitrate was taken as 1:1. The synthesized samples were characterized by powder X-ray diffraction and far-IR spectroscopy. The measured lattice constants and observed characteristic IR absorption bands of all samples were in good agreement with the reported values and showed the formation of a cubic spinel structure. The crystallite sizes of all samples were determined using high-intensity peaks and a W-H plot. The crystallite sizes of all samples were observed to be in the range of 16–26 nm with the least crystallite size of 16.8 nm for copper ferrite. All structural parameters were calculated using an experimental lattice constant and an oxygen positional parameter and correlated with far-IR results. Zinc and copper owing to their large cation radii showed the expansion of the lattice in view of the oxygen positional parameter. Magnetic measurements were carried out using a vibrating sample magnetometer at room temperature, and parameters such as saturation magnetization, coercivity, remanence, squareness ratio, and Bohr magnetons were calculated. Among all synthesized nano-ferrites, cobalt nano-ferrite showed the highest saturation magnetization of 41 emu/g, whereas zinc ferrite displayed a low saturation magnetization value of 12.87 emu/g.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanostructural Characterization of the Fe{sub 3}O{sub 4}/ZnO Magnetic Nanocomposite as an Application in Medicine

In the present work, we synthesize Fe{sub 3}O{sub 4}/ZnO nanocomposite by sol-gel method using iron nitrate, ethylene glycol, zinc acetate dehydrate, and ammonium carbonate as precursors. Amorphous matrix and crystalline grains were formed in composite as well. The nanostructural properties of the nanocomposite were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and colloidal stability was checked out by Zeta potential. The biological effects of Fe{sub 3}O{sub 4}/ZnO nanocomposite were investigated by microculture tetrazolium test (MTT) against MCF-7 breast cancer cells as usage in medicine. Crystallite size, lattice strain, and dislocation density of the nanoparticles were estimated with Williamson-Hall method. The obtained results show that the highest death rate of Michigan Cancer Foundation-7 (MCF-7) cancer cells was for Fe{sub 3}O{sub 4}/ZnO nanocomposite with the molar ratio is 1:10 in the lower concentration (49 μ g/ml). Therefore, these nanocomposites due to their small size, colloidal stability, magnetic properties, and nontoxicity can be a good candidate as option in medicine application.

60 APPLIED LIFE SCIENCES↗

Study on Microwave Performance of Low-Temperature Sintered, Ba(CoTi){sub 1.5}Fe{sub 9}O{sub 19} Ferrite for Application at UHF Frequency

M-type barium ferrite, Ba(CoTi){sub 1.5}Fe{sub 9}O{sub 19}, was synthesized via the solid-state reaction method. BBSZ, i.e., B{sub 2}O{sub 3} −Bi{sub 2}O{sub 3} −SiO{sub 2} −ZnO, was added to adjust the sintering temperature to values lower than that of silver (i.e., ∼961 °C). The phase formation characteristics, microstructure, magnetic, and microwave properties were characterized by x-ray diffraction, scanning electron microscope, vibrating sample magnetometer, and impedance analyzer, respectively. The results show that densification of samples were enhanced by increasing the amount of BBSZ with corresponding gains realized in magnetic properties. Such enhanced properties in Ba(CoTi){sub 1.5}Fe{sub 9}O{sub 19} are attributed to the low-melting point experienced as the result of BBSZ glass additives which gave rise to the stabilization of a liquid phase during sintering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Chromium Substitution on Structural and Magnetic Properties of Nickel-Cobalt Ferrite Nanoparticles Synthesized by Co-precipitation Method

Ni{sub 0.3}Co{sub 0.7}Cr{sub x}Fe{sub 2−x}O{sub 4} (x = 0, 0.2, 0.4, and 0.6) nanoparticles were synthesized by co-precipitation method followed by annealing treatment. The structural and magnetic properties of the samples were determined by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric and differential scanning calorimetry (TG-DSC) analysis, and a vibrating sample magnetometer (VSM) at room temperature. The XRD patterns revealed a single-phase cubic spinel structure for all the annealed products. The average crystallite size is in the range of 45–60 nm. Cation distribution by XRD analysis indicated that Cr{sup 3+} ions preferentially replace Fe{sup 3+} ions from the octahedral sites due to their favorable crystal field effects; with increasing Cr content, it was observed that Co{sup 2+} migrated from octahedral sites to tetrahedral sites. The decrease in saturation magnetization with the increase in Cr concentration could be attributed to reduction in the super-exchange interaction between the A and B sublattices. The observed decrease in coercivity can be explained by reduction in magneto-crystalline anisotropy that resulted from migration of Co{sup 2+} ions from B sites to A sites with the increase in Cr content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental and Theoretical Investigations of Magnetic Properties of Co Ferrite/Polyvinyl Alcohol Nanocomposites

Cobalt ferrite nanoparticles (NPs) have been synthesized by the modified co-precipitation technique in the presence of the polyvinyl alcohol (PVA) matrix. The structural and magnetic properties of NPs are tunable by means of interaction between the polymer and the surface of NPs. Magnetic properties of NPs were simulated using the accurate Monte Carlo (MC) method. In addition, the magnetic anisotropy constant has been obtained by means of the law of approach to saturation magnetization (LAS). The experimental and theoretical results are in good agreement with each other and show that the as-synthesized NPs are single domain and approximately non-interacting. The anisotropy constant and size of the NPs increase by increasing the concentration of precursors in the reaction medium. Nanocomposites have been characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Hysteresis loops were investigated at room temperature using a vibrating sample magnetometer (VSM). The crystallite size of single-domain NPs is lower than 20 nm, and the obtained results from FT-IR confirmed the interaction between PVA and the surface of the particles. These approximately non-interacting NPs are useful for magnetic data storage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improvement of the Magnetization and Coercivity of La{sub 0.67}Ca{sub 0.33}MnO{sub 3} Induced by Substitution of Nickel for Manganese

La{sub 0.67}Ca{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3} (0 ≤x ≤ 0.3) is synthesized by solid-state reaction at low temperatures, followed by calcination in air. The precursor and its calcined products are characterized by thermogravimetry and differential scanning calorimetry, x-ray powder diffraction, scanning electron microscopy, and vibrating sample magnetometer. A high-crystallized La{sub 0.67}Ca{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3} with an orthorhombic structure is obtained when the precursor is calcined at 900{sup ∘}C in air for 3 h. Crystallite size of La{sub 0.67}Ca{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3} increases with the increase of Ni content, attributed to the decrease of lattice strains of the La{sub 0.67}Ca{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3} with the increase in Ni content. Nickel substitution can markedly improve coercivity and specific magnetization of La{sub 0.67}Ca{sub 0.33}Mn{sub 1−x}Ni{sub x}O{sub 3}. The coercive field (9 Oe) of La{sub 0.67}Ca{sub 0.33}Mn{sub 0.7}Ni{sub 0.3}O{sub 3} is higher, even at 293 K, indicating that La{sub 0.67}Ca{sub 0.33}Mn{sub 0.7}Ni{sub 0.3}O{sub 3} continues being ferromagnetic above 260 K (Curie temperature for LCMO).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Mn Doping on the Structural, Magnetic, and Magnetocaloric Effect of Fe{sub 17}Dy{sub 2} Compounds

Crystal structural and magnetic properties of polycrystalline (Fe{sub 1−x}Mn{sub x}){sub 17}Dy{sub 2} (x = 0.0, 0.1, 0.2, and 0.3) compounds were studied by X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) measurements. The results show that (Fe{sub 1−x}Mn{sub x}){sub 17}Dy{sub 2} forms as a substitutional solid solution with the hexagonal Th{sub 2}Ni{sub 17} type. The unit cell volume increases with Mn content. The Curie temperature (T{sub C}) can be tuned from 364 K for x = 0.0 to 80 K for x = 0.3. The magnetic transition at T{sub C} is a typical second-order ferromagnetic-paramagnetic transition. For an applied field change from 0 to 5 T, the maximum magnetic entropy change (| − ΔS{sub M}|) for (Fe{sub 1−x}Mn{sub x}){sub 17}Dy{sub 2} (x = 0.0, 0.1, and 0.2) compounds are 3.9, 2.8, and 1.7 J kg{sup −1} k{sup −1}, respectively. The high ΔS{sub M}, appropriate T{sub C}, and a high performance-to-cost ratio make (Fe{sub 1−x}Mn{sub x}){sub 17}Dy{sub 2} compounds a candidate materials for room-temperature magnetic refrigeration applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Magnetic Properties of Thermal- and Deformation-Induced Martensite in an Fe-27%Ni-4%Mn-1%Zn Alloy

Deformation- and thermal-induced martensite properties were examined according to existing martensite morphology and magnetic properties for same prior austenite homogenization conditions in Fe-27%Ni-4%Mn-1%Zn alloy. Scanning electron microscope (SEM) and vibrating sample magnetometer (VSM) characterization techniques were employed for the investigation. Scanning electron microscope observations showed that while martensite formation in the austenite phase of alloy exhibited a lath morphology by thermal effect, elongated deformation-induced martensite morphology exists after deformation. The Curie temperatures were detected at about 201 K for thermal-induced martensite and at about 226 K for deformation-induced martensite from VSM measurements. The magnetic saturation values were determined as about 21 emu g{sup −1} for thermal-induced martensite and 23 emu g{sup −1} for deformation-induced martensite. We found that magnetic saturation increased with deformation effect. On the other hand, VSM offered the soft ferromagnetic characteristic with coersive values of 36 Oe for thermal-induced martensite and the soft ferromagnetic characteristic with 47 Oe for deformation-induced martensite. The changes in the magnetic properties resulting from the thermal and deformation affect were clearly determined. Deformation caused magnetic stabilization in Fe-27%Ni-4%Mn-1%Zn alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of Broadband Microwave Absorber and Measurement of Its Magnetic and Microwave Properties

Toroid shape Co-doped barium hexaferrites of composition (BaFe{sub 11}CoO{sub 19}) are prepared by standard sintering technology as a sample. In this work, XRD is used to identify the structure of synthesized sample. Vibrating sample magnetometer is used to obtain magnetic hysteresis loop of sample. Scanning electron microscope is used for surface morphology of sample. The complex permeability and permittivity are measured with commercial automation measurement set up in the 2–18 GHz frequency range. As a result of measurement, the calculation of reflection loss of the synthesized samples has been carried out. Investigation of microwave absorption properties revealed that the maximum reflection loss of Co-doped barium hexaferrite sample is around −20 dB and almost flat in the measurement frequency band. From these results, it was concluded that Co-doped barium hexaferrites of composition had a good potential as microwave absorber in the broadband frequency range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation, Electrical and Magnetic Properties of Poly(m-phenylenediamine)/ZnFe{sub 2}O{sub 4} Nanocomposites

The different ratios of ZnFe{sub 2}O{sub 4} nanoparticles (10 and 20%) were wrapped on poly(m-phenylenediamine) through in situ oxidative polymerization method. The formation of PmPD/ZnFe{sub 2}O{sub 4} nanocomposites was confirmed through FTIR spectroscopy and XRD pattern. From the XRD results, the average crystalline size of ZnFe{sub 2}O{sub 4} nanoparticles and PmPD/ZnFe{sub 2}O{sub 4} nanocomposites were also calculated. The SEM image of ZnFe{sub 2}O{sub 4} nanoparticles shows granular morphology and FESEM images of PmPD/ZnFe{sub 2}O{sub 4} nanocomposites indicate the ZnFe{sub 2}O{sub 4} nanoparticles are agglomerated on PmPD matrix. The soft magnetic behavior of ZnFe{sub 2}O{sub 4} nanoparticles and PmPD/ZnFe{sub 2}O{sub 4} nanocomposites were observed from vibrating sample magnetometer. The dielectric properties of PmPD/ZnFe{sub 2}O{sub 4} nanocomposites were studied with different temperatures and frequencies. The magnetic properties of ZnFe{sub 2}O{sub 4} nanoparticles were also analyzed through Mössbauer spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Responses of Divinylbenzene-Fe{sub 3}O{sub 4} Composite Film Deposited by Free Radical Polymerization Method

The study reports some novel information on both production and characterization for the poly [DVB/Fe{sub 3}O{sub 4}] composite film deposited by free radical polymerization method. The composite film consists of a combination of organic phase and magnetite nanoparticles. The magnetization behavior of the poly [DVB/Fe{sub 3}O{sub 4}] composite film was analyzed with both vibrating sample magnetometers (VSM) and a technique of electron spin resonance (ESR). It was found that the ESR study performed at room temperature showed the poly [DVB/Fe{sub 3}O{sub 4}] composite film had strong transition of g{sub eff} ∼2.5 (254 mT) due to the Fe{sup 3+} S-state ions. This g{sub eff} value indicated that the composite film behavior was near superparamagnetism. The VSM results also supported the ESR results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Temperature on Sr{sub 0.35}La{sub 0.40}Ca{sub .25}Fe{sub 11.6}Co{sub 0.4}O{sub 19} Hexagonal Ferrites Against Structural, Morphological and Magnetic Properties Prepared by Conventional Ceramic Reaction Methodology

Conventional Ceramic Reaction Methodology has been utilized for the preparation of M-type hexagonal ferrites of Sr{sub 0.35}La{sub 0.40}Ca{sub 0.25}Fe{sub 11.6}Co{sub 0.4}O{sub 19} magnets. X-ray diffraction has been performed for phase determination of the magnetic powders. At calcination temperatures ranging from 1220 to 1330 {sup ∘}C, the synchronize compost of the magnetic powders comprised of M-type hexagonal ferrites together with a small amount of impurity phase such as α-Fe{sub 2}O{sub 3} were co-existed. At calcination temperature above 1270 {sup ∘}C, single-phase M-type hexaferrites can be obtained. The particles seemed to be in a hexagonal plate-like mould which spread-out homogeneously were examined by field emission scanning electron microscopy. The magnetic edibility of the magnetic powders was intended by permanent magnetic measurement test equipment vibrating sample magnetometer. Magnetic properties, such as specific saturation magnetization, coercivity and remanence were temperature-dependent. However, with the increase of sintering temperature, i.e. above 1270 {sup ∘}C, saturation magnetization was increased while the coercivity showed reversed order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SPION@APTES@FA-PEG@Usnic Acid Bionanodrug for Cancer Therapy

In this work, we aimed to develop stable usnic acid (UA)-conjugated superparamagnetic iron oxide nanoparticles (SPIONs) as a potential drug carrier for in vitro analysis of MCF-7 (breast cancer cell line), HeLa (cervix cancer cell line), L929 (mouse fibroblast cell line), U87 (glioblastoma cell line, brain cancer), and A549 (human lung cancer cell line) cell lines. SPIONs were synthesized via the polyol method and functionalized with APTES using the Stöber method. Carboxylated polyethylene glycol (PEG-COOH), folic acid (FA), and carboxylated luteolin (CL) were conjugated on the surface via a carboxylic/amine group using the nanoprecipitation method, respectively. X-ray powder diffraction analysis confirmed the purity of the product with crystallite size of around 11 nm. Fourier-transformed infrared spectrophotometer (FT-IR) analyses explained the conjugation of all functional groups to the surface of SPIONs. The percentages of inorganic and organic content in the products were investigated via thermal gravimetric analyzer (TGA). For morphological analysis, a transmission electron microscope (TEM) was used. The superparamagnetic property of the product was also confirmed by vibrating sample magnetometer (VSM).

60 APPLIED LIFE SCIENCES↗

Giant Exchange Bias of Hysteresis Loops on Cr{sup 3+}-doped Ag Nanoparticles

In this study, we fabricate Cr-doped Ag nanoparticles (AgCrO{sub 2} and Ag{sub 0.5}Cr{sub 2.5}O{sub 4}) by flash autocombustion method. XRD confirmed that the samples have a single-phase spinel structure. The morphology is studied using high-resolution transmission electron microscopy (HRTEM) to confirm that the samples are on nanoscale. The magnetic properties are studied using a vibrating sample magnetometer (VSM) at room temperature (300 K) and at low temperatures (200 and 100 K). Exchange bias has occurred for the investigated samples below room temperatures. The shifts have occurred in the horizontal directions which may be ascribed to the frozen spins in the samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗