Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETORESISTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Thickness-dependent transport in epitaxial CaIrO 3 perovskite thin films

The coexistence of strong electron–electron correlation and strong spin–orbit coupling makes CaIrO 3 a promising candidate for the exploration of emergent phenomena in thin film form. Here, we have realized epitaxial CaIrO 3 films on (La 0.18 Sr 0.82 )(Al 0.59 Ta 0.41 )O 3 single crystal substrates with excellent crystallinity and thicknesses ranging from 3 to 32 nm. Electronic properties range from semiconducting to insulating behavior as a function of decreasing thickness and correlate with increased tetragonal distortion due to substrate-imposed strain. Hall effect measurements indicate that conduction is dominated by electron-type carriers at room temperature but crosses over to transport dominated by hole-like carriers at lower temperatures. Longitudinal magnetoresistance measurements reveal both a quadratic Lorentz dependence and an additional positive component in the field dependence that cannot be explained purely by semi-classical orbital magnetoresistance effects.

36 MATERIALS SCIENCE↗

Magnetotransport of Sm 2 Ir 2 O 7 across the pressure-induced quantum-critical phase boundary

Rare-earth pyrochlore iridates host two interlocking magnetic sublattices of corner-sharing tetrahedra and can harbour a unique combination of frustrated moments, exotic excitations and highly correlated electrons. They are also the first systems predicted to display both topological Weyl semimetal and axion insulator phases. We have measured the transport and magnetotransport properties of single-crystal Sm 2 Ir 2 O 7 up to and beyond the pressure-induced quantum critical point for all-in-all-out (AIAO) Ir order at $p_c$ = 63 kbar previously identified by resonant X-ray scattering and close to which Weyl semimetallic behavior has been previously predicted. Our findings overturn the accepted expectation that the suppression of AIAO order should lead to metallic conduction persisting down to zero temperature. Instead, the resistivity-minimum temperature, which tracks the decrease in the AIAO ordering temperature for pressures up to 30 kbar, begins to increase under further application of pressure, pointing to the presence of a second as-yet unidentified mechanism leading to non-metallic behavior. The magnetotransport does track the suppression of Ir magnetism, however, with a strong hysteresis observed only within the AIAO phase boundary, similar to that found for Ho 2 Ir 2 O 7 and attributed to plastic deformation of Ir domains. Around $p_c$ we find the emergence of a new type of electronic phase, characterized by a negative magnetoresistance with small hysteresis at the lowest temperatures, and hysteresis-free positive magnetoresistance above approximately 5 K. The temperature dependence of our low-temperature transport data are found to be best described by a model consistent with a Weyl semimetal across the entire pressure range.

36 MATERIALS SCIENCE↗

Neutron scattering study of charge-ordering in R1/3Sr2/3FeO3 (R=La, Pr, Nd, Sm, and Y)

The complicated physical phenomena in complex transition-metal oxides (TMO), such as high T c superconductivity, colossal magnetoresistivity, metal-insulator transitions, etc., have long been the focus of intense inquiry and debate in condensed matter science, since they are related to strong electronic correlations and cannot be explained within the 'standard model' of solid state physics. These novel functionalities of the correlated electron systems have a wide range of potential for applications in industry, such as information storage, energy transportation, and so on. The charge-ordering (CO) transition is very common in TMO and there is a specific CO transition temperature, TCO. Above TCO, the charge is not ordered, which means that the electrons in a compound are itinerant and the positions of the electrons are not fixed. Below TCO, the charge is ordered, which means that the electrons are localized and the positions of the electrons are settled. Hence, the electrical conductivity of a material is changed at TCO and this transition is classified as metal-insulator transition. Usually the CO with commensurate hole doping in TMO is thought to play an important role in various cases, including the superconducting cuprates, where the spin/charge stripe formation competes with superconducting states, colossal magnetoresistive manganites, where CO competes with ferromagnetic metallic state stabilized by an external magnetic field, layered nickelates, where CO takes the form of the small polaron lattices, and layered manganites, where CO could be bothered by the correlated dynamics of spins and charges. Therefore understanding the causes and implications of CO phenomena is significantly important.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Analog Random-Access Memory

Proposed integrated, solid-state, analog random-access memory base on principle of magnetic writing and magnetoresistive reading. Current in writing conductor magnetizes storage layer. Remanent magnetization in storage layer penetrates readout layer and detected by magnetoresistive effect or Hall effect. Memory cells are part of integrated circuit including associated reading and writing transistors. Intended to provide high storage density and rapid access, nonvolatile, consumes little power, and relatively invulnerable to ionizing radiation.

Katti, Romney R.↗

Enhancement of Shubnikov-de Haas Oscillations by Carrier Modulation

A novel technique for drastically enhancing the Shubnikov-de Haas (SdH) pattern of oscillatory magnetoresistance is presented. The technique is based on measuring the change in the magnetoresistance due to a carrier generated by a modulated light source. The technique also has the important property of selectively increasing the amplitude of the slower oscillations due to carriers in the second subband much more than oscillations generated by the ground subband electrons. Very clear oscillations generated by a carrier concentration well below 5 x 10 exp 10/sq cm were recorded using the technique.

Schacham, S. E.↗

Magnetic field sensor for isotropically sensing an incident magnetic field in a sensor plane

A magnetic field sensor that isotropically senses an incident magnetic field. This is preferably accomplished by providing a magnetic field sensor device that has one or more circular shaped magnetoresistive sensor elements for sensing the incident magnetic field. The magnetoresistive material used is preferably isotropic, and may be a CMR material or some form of a GMR material. Because the sensor elements are circular in shape, shape anisotropy is eliminated. Thus, the resulting magnetic field sensor device provides an output that is relatively independent of the direction of the incident magnetic field in the sensor plane.

Pant, Bharat B.↗

Synthesis and Properties of Nanostructured Exotic Superconductors (Final Report)

Superconductors are materials that conduct electricity with no resistance, i.e. no energy dissipation. In future electrically activated nanodevices, the use of superconducting interconnects is highly desirable, since it circumvents the damaging heat produced by energy dissipation in normal nano-conductors whose high resistance is inversely proportional to its cross-section area. Furthermore, the wave functions of the charge carriers - Cooper pairs will be strongly modified in a superconductor when they are squeezed into a small volume comparable to the coherence length or penetration depth. Thus, superconducting nanostructures provide unique platforms to investigate and discover novel superconducting phenomena in confined geometries. The objective of this DOE funded project was the development of novel approaches to synthesizing a new class of superconducting nanostructures such as nanowires and nanoribbons that are stable in atmosphere, enabling the exploration of superconducting properties and potential applications of individual nanostructures. We also pursued the modification of properties of the fabricated nanostructures by introducing artificial defects through nanoengineering. We developed a conversion approach comprised of two-steps to synthesize NbSe 2 and NbN nanowires/ribbons that were not achievable using other routes: first, we synthesized one-dimensional (1D) nanostructures of NbSe 3 and second, we converted these into desired 1D superconducting nanostructures of NbSe 2 and NbN by adjusting the composition of NbSe 3 nanostructure precursors while maintaining their shapes. Novel phenomena such as resistance oscillations with increasing magnetic fields were observed in both NbSe 2 and NbN nanowires/ribbons. By replacing the catalytic microparticles used in conventional whisker growth with the same kind of nanoparticles that are available now commercially, we improved whisker technologies for nanofabrication of high-T c superconductor nanowires/ribbons: we succeeded in the growth of Bi 2 Sr 2 CaCu 2 O 8+x (BSCCO-2212) and YBa 2 Cu 3 O 7-x (YBCO) nanowires and nanoribbons by annealing glassy precursors with alumina nanoparticles as growth sites. The high-quality whiskers enabled us to observe the ‘matching effect’ that represents itself as dips in the field dependence of the magnetoresistance and the influence of the periodic defects on the melting behavior of vortex matter. We also observed N-shaped V-I characteristics similar to those observed in semiconductor and plasma devices for the first time. Each nanofabrication technique has its advantages and drawbacks. For example, electron-beam lithography (EBL), in combination thin film deposition, has been widely used to fabricate nanowires (nanobridge) with well-defined cross-sections. However, electron-beam resist usually contaminates the sample up to a few hundred nanometers and hence degrades the quality of the entire nanowires if their widths are only a few hundred nanometers. We found that e-beam resist can degrade the superconducting critical temperature of a Nb nanowire from 9 K down to below 4 K if its width is less than 200 nm. We investigated the suitability of the various nanofabrication methods for achieving high-quality samples with desired properties. For example, we developed a novel way to achieve high quality Nb nanostrips with transverse dimensions of 150 nm or smaller. In the new process a superconducting bridge a few micrometers wide is fabricated with EBL. Subsequently, focused-ion-beam (FIB) is used to mill nano- 2 grooves to isolate an uncontaminated area of the microbridge to form a nanostrip. The high-quality superconducting Nb nanostrips with well-defined rectangular cross-sections fabricated using this new technique have enabled experimental confirmation of the theoretically predicted confinement-induced anisotropy effect on the magnetoresistance and critical field. We also found that FIB milling is more suitable than EBL in producing a pinning potential array with desired barrier between them into a MoGe film, which enabled us to realize the predicted vortex ices for the first time. By utilizing a filtration membrane as the substrate, we developed a new method to achieve networks of superconducting MoGe nanowires with transverse dimensions smaller than 10 nm. We observed superconducting confinement effect such as thermally activated phase slips and Little-Parks effect in these new samples. This research significantly advanced our knowledge on confined superconductors, in both their synthesis and physical properties. Though the new fabrication methods developed in this project aimed to achieve samples for studying new phenomena in confined superconductors, they can be utilized to obtain nanostructures of other functional materials. For example, we utilized the method developed to produce superconducting nanowire networks for the fabrication of networks of ultrasmall palladium (Pd) nanowires, which take advantage of single Pd nanowires while eliminating their nanofabrication obstacles, resulting in high-performance hydrogen sensors that are much more cost effective than those based on single Pd nanowires fabricated with lithography methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unusual ordering in c-NpPd3

NpPd{sub 3} exhibits two crystal structures. At room temperature, the equilibrium structure is the dhcp TiNi{sub 3}-type, but rapid cooling from melt produces the cubic AuCu{sub 3}-type structure. In both cases, the Np-Np distance is 4.1 {angstrom}, so that the Np ions are expected to be localized. Both phases of NpPd{sub 3} were first studied at the ANL in the early 1970s. Nellis et al measured the magnetic susceptibility and the electrical resistivity of cubic NpPd{sub 3}, and found evidence of magnetic ordering setting in below T{sub N} = 54 K. The magnetic order in this phase was confirmed by Moessbauer and neutron studies. The neutron data revealed several magnetic Bragg peaks with an ordering wave-vector of (1/2,1/2, 1/2). In contrast, no evidence for any long-range magnetic ordering was found for dhcp NpPd{sub 3}, despite the presence of an anomaly at 30 K in the bulk magnetic data. Our recent measurements of the magnetic (magnetization, susceptibility), thermal (heat capacity) and transport (electrical resistivity, magnetoresistivity, thermopower and Hall effect) properties of cubic NpPd{sub 3} indicated highly unusual nature of the magnetic ordering. At T{sub N}, the specific heat exhibits an extremely large peak [as large as 1000 J/(mol K)] and the magnetic susceptibility shows a clear jump. The transport properties of c-NpPd{sub 3} indicate a dramatic Fermi-surface reconstruction at T{sub N}, which shows up as pronounced anomalies at this temperature in the electrical resistivity, the magnetoresistivity, the Seebeck coefficient and the Hall coefficient.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical Switching and Imaging of Antiferromagnetic Spins in Perovskite Epitaxial Thin Films

Electrical control of antiferromagnets is essential for the field of antiferromagnetic spintronics that promises ultrafast speed and terahertz dynamics. However, the large family of complex oxide antiferromagnets such as perovskites have been largely unexplored. Here, we demonstrate electrical switching and detection of Néel vector in LaFeO 3 epitaxial thin films with an epitaxy-enabled biaxial anisotropy, of which the switching behavior is understood by comparing to magnetic field controlled spin Hall magnetoresistance measurements. The electrical switching is corroborated by imaging of antiferromagnetic domains using X-ray Magnetic Linear Dichroism Photoemission Electron Microscopy. Electrical switching of 3-nm and 10-nm LaFeO 3 films was achieved over a wide temperature range of 25 to 300 K. This work offers an attractive platform for exploration of antiferromagnetic spintronics and other emerging phenomena such as potential insulating altermagnetism.

36 MATERIALS SCIENCE↗

Spin orbit torque in ferromagnet/topological-quantum-material heterostructures

The main objective of this proposal was to investigate the spin-orbital driven phenomena in topological insulator (TI)/ferromagnet (FM) or transition metal (TM) heterostructures. In particularly, we tried to utilize the spin-momentum locking properties on the surface of TIs to achieve ideal spin-orbit torques (SOTs). In practice, we found that the surface properties have been greatly modified, resulting in much more complicated magneto-transport behaviors than what is expected in SOT-driven magnetotransport. Through systematic and extended investigations, we start to unravel that the nonlinear magnetotransport properties, which was, in the past, mainly attributed to SOT-driven phenomena, can be used to infer the modification of the electronic band structures of TIs and spin textures in FMs which are closely related with charge-spin interconversion phenomena. Regarding the band structures In TIs, we find under electrostatic perturbations imposed by deposition of nonmagnetic TMs, the quantum well states formed on the surface of TIs develop substantial Rashba spin-splitting, which is detected as a bilinear magnetoresistance (BMR). Under magnetic perturbations, the nonlinear planar Hall effect (NPHE) in the topological surface states is greatly enhanced, possibly reflecting the modified surface band structure due to time-reversal symmetry breaking. In a double HM/FM heterostructure where the magnetic anisotropy can be robustly tuned, we observed second-harmonic Hall voltage responses corresponding to domain wall structures with fixed chirality, stabilized by interfacial Dzyaloshinskii–Moriya interaction (DMI). In addition, in the linear transport regime, we utilized inverse-SHE-induced anomalous Hall effect in Pt to probe the exchange bias on the surface of a doped magnetic insulator Tm 3 Fe 5 O 12 .

36 MATERIALS SCIENCE↗

Insights into the Mechanism of Chiral‐Induced Spin Selectivity: The Effect of Magnetic Field Direction and Temperature

Chiral oligopeptide monolayers are adsorbed on a ferromagnetic surface and their magnetoresistance is measured as a function of the angle between the magnetization of the ferromagnet and the surface normal. These measurements are conducted as a function of temperature for both enantiomers. The angle dependence is found to follow a changing trend with a period of 360°. Quantum simulations reveal that the angular distribution can be obtained only if the monolayer has significant effective spin orbit coupling (SOC), that includes contribution from the vibrations. The model shows that SOC only in the leads cannot reproduce the observed angular dependence. The simulation can reproduce the experiments if it included electron–phonon interactions and dissipation.

36 MATERIALS SCIENCE↗

The Magneto-Transport Properties of Cr 1/3 TaS 2 with Chiral Magnetic Solitons

Cr 1/3 TaS 2 —a candidate of chiral magnet—has been reported as a trivial ferromagnetic material. In contrast, the Cr 1/3 TaS 2 single crystals exhibit a chiral helimagnetic (CHM) transition near 140 K. The magnetic moment versus magnetic field curves reveal a CHM—chiral soliton lattice (CSL)—forced ferromagnetic (FFM) transition in the magnetic ordered state. The conducting electrons interact with the CHM and CSL orders, giving rise to the nontrivial magnetoresistance (MR) in the Cr 1/3 TaS 2 single crystals. The normalized magnetic moment and normalized MR fit well with the analytical functions for chiral soliton density. The magnetic phase diagrams constructed from the magnetic moment data and MR data suggest a possible tri-critical point. Compared with the isostructural Cr 1/3 NbS 2 , the CHM transition temperature of Cr 1/3 TaS 2 is 13 K higher, the CSL—FFM transition field is about 10 times larger, and the Dzyaloshinskii-Moriya interaction strength is 3 times bigger. The latter two likely originate from the strong spin-orbit coupling (SOC) of Cr 1/3 TaS 2 . This work clarifies that high-quality Cr 1/3 TaS 2 single crystals are chiral magnets and Cr 1/3 (Nb,Ta)S 2 could serve as an intriguing platform for the flexible engineering of chiral magnetic solitons with tunable SOC.

36 MATERIALS SCIENCE↗

Flux Crystal Growth of the Ternary Polygermanide LaPtGe 2 , a p-Type Metal

Large plate crystals of LaPtGe2 have been grown by using an inert indium metal flux. This compound crystallizes in the CeNiSi2-type structure (orthorhombic space group Cmcm) with lattice parameters a = 4.3770(9) angstrom, b = 17.186(3) angstrom, and c = 4.3942(9) angstrom. The structure of LaPtGe2 is a three-dimensional framework with alternating PbO-type layers of PtGe and infinite Ge chains, separated by La atoms. Electrical resistivity and Hall effect measurements characterize LaPtGe2 as a metal with holes that act as the charge carriers. Strong temperature dependence of the Hall coefficient and a violation of Kohler's rule (from magnetoresistance data) both indicate possible multiband effects. The electronic structure calculations suggest the metallic nature of LaPtGe2 and show that the strongest bonding exists between Pt and Ge within the PbO-type layers.

Charge transport measurements↗

Synthesis and Microstructural Analysis of Magnetic CaFe{sub 0.5}Co{sub 0.5}O{sub 3−δ} Using Rietveld Method

Perovskite cobaltates are widely recognized as potential candidates for their applications in magnetic and magnetoresistive applications. In this report, pseudo-magnetic CaFe{sub 0.5}Co{sub 0.5}O{sub 3−δ} was synthesized at ambient pressure. Various calcinations, heating times, and sintering temperatures were applied in order to achieve the optimized conditions. The optimal sintering temperature with excellent phase and microstructure was found at ∼1050 °C using CaCO{sub 3} as precursor. Rietveld analysis was carried out to solve and refine the XRD pattern of the final specimens. The sample with excellent refined values was solved in orthorhombic phase and pbcm space group. From the SEM and EDS analysis, the excellent grain growth with high densification and ABO{sub 3} structure was confirmed respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and Transport Properties of Co{sub 1+δ}Sb Single Crystals

For some 3d transition-metal monopnictides, their physical properties are strongly affected by interstitial 3d transition-metal atoms, such as Fe{sub 1+δ}Sb, in which the electrical transport, magnetic properties and carrier concentrations have strong dependence on the composition of interstitial Fe (Shiomi et al. Phys. Rev. Lett. 108(5), 056601 2012), Therefore, it is important to study the influence of interstitial Co on the physical properties of Co{sub 1+δ}Sb. Here, the magnetic and transport properties have been studied on Co{sub 1.05}Sb single crystals. The magnetic and electrical transport measurements reveal that stoichiometric CoSb is a nonmagnetic metal. The interstitial Co in this compound exhibits a paramagnetic behaviour and weak antiferromagetic correlations. However, it has no effect on transport properties. A very low magnetoresistance (≤ 0.2%) was observed under the magnetic field up to 14 T, which suggests that Co{sub 1+δ}Sb could be a potential material of electronic devices for the application at a high magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of BaTiO{sub 3} on Magnetic and Transport Properties of La{sub 0.7}Sr{sub 0.3}MnO{sub 3}-BaTiO{sub 3} Nanocomposite

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO)-BaTiO{sub 3} (BTO) nanocomposites have been synthesized by adding different amounts of BTO using the sol-gel method. The structural analysis confirms that both phases coexist in the composite samples with the rhombohedral and tetragonal structure for LSMO and BTO, respectively. The magnetization measurement shows a decrease in magnetization with the increase in BTO concentration and a signature of the spin glass-like characteristics of the nanocomposite. The dielectric behavior indicates the existence of the magneto-electric coupling between LSMO and BTO phase. The measurement of transport properties shows that resistivity increases with BTO concentration and metal-insulator (M-I) transition temperature shifts towards lower temperature. The low-temperature (T < 50 K) resistivity behavior of the samples is analyzed by using the Kondo-like transport model. The results show the spin-disordered scattering increases with the increase in the amount of BTO in LSMO phase. The low-field magnetoresistance (LFMR) of the nanocomposite is improved as compared to the pure LSMO. The highest value of LFMR achieved for LSMO-BTO composite at 10 K is 35.5% with a 1 T magnetic field.

36 MATERIALS SCIENCE↗

Metamagnetism, Multiple Magnetic Transitions and Wide Temperature Range Magnetocaloric Effect in Dy{sub 6.5}Co{sub 2}Si{sub 2.5} Alloy

We report the structure, magnetic, thermodynamic, transport, and magnetocaloric properties of Dy{sub 6.5}Co{sub 2}Si{sub 2.5} alloy. It shows that this alloy has been formed in three phases viz., Dy{sub 5}Si{sub 3}, Dy{sub 3}Co{sub 2.2}Si{sub 1.8}, and Dy{sub 3}Co with four successive magnetic transitions named as T{sub 1}, T{sub 2}, T{sub 3},T{sub 4}, at 43, 74.7, 90.5, and 132.4 K, respectively. The magnetic measurements display competing ferromagnetic and antiferromagnetic interactions in the alloy. At 2.5 K, the alloy exhibits hard ferromagnetic properties with a coercive field of 0.8 T. Metamagnetism is also evidenced in the isothermal magnetization measurements. The Arrot plot shows that this material undergoes first-order magnetic transitions below 47 K, and above which, magnetic transitions are of second order. The four successive magnetic transitions together with competing magnetic interactions give rise to a broadened magnetocaloric effect (MCE) peak with temperature width of ΔT = 83.8 and 93.2 K and consequently a large RC value of 474 and 739 J/kg, for a magnetic field change of 0–5 and 0–7 T, respectively. Additionally, it is found that the alloy exhibits negative magnetoresistance and attains a value of − 11 and − 7% at 2.5 and 50 K, respectively, in applied magnetic field of 9 T. Thus, the peculiar magnetic and magnetocaloric properties make the Dy{sub 6.5}Co{sub 2}Si{sub 2.5} alloy promising not only for low-temperature magnetic refrigeration but also for fundamental study perspectives.

36 MATERIALS SCIENCE↗

Investigation of the Structural, Magnetic, Magnetocaloric, Electrical Properties, and Spin-Polarized Tunneling Effect of the La{sub 0.5}Ca{sub 0.3}Te{sub 0.2}MnO{sub 3} System

Structural, magnetic, magnetocaloric, electrical properties, and spin-polarized tunneling effect in La{sub 0.5}Ca{sub 0.3}Te{sub 0.2}MnO{sub 3} polycrystalline were studied in details. The temperature dependence of the inverse of the magnetic susceptibility indicates the presence of ferromagnetic exchange interaction between the nearest neighbors at the Weiss temperature θp = 265.32 ± 0.109. Based on the magnetic field dependence of magnetization, M(H), and employing the thermodynamic Maxwell equation, the magnetic entropy change |ΔS{sub M}| of the studied sample was determined. The maximum entropy change value of the system was around 4.99 J kg{sup −1} K{sup −1} under a magnetic field of 5 T. Electrically, the upturned region of resistivity was observed at low temperature. The recovery of the resistivity was found to be strongly affected by the external magnetic field. The electrical data were analyzed considering various models. Interestingly, the exception of the spin-polarized tunneling (SPT) model is in good agreement with the experimental data among other models. In the current work, the SPT is the dominant mechanism leading to the rise of resistivity, while decreasing the temperature values. Magnetotransport analysis was successfully carried out using percolation model in the temperature range between around 50 K to nearly 300 K under different magnetic fields up to 8 T. The isothermal field dependence of magnetoresistance was recorded fairly well via a phenomenological model based on the spin-polarized tunneling model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗