Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETORESISTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Effects of annealing on the local structure of FE and Co in CoFeB/MgO/CoFeB tunnel junctions: An extended x-ray absorption fine structure study

Extended x-ray-absorption fine structure (EXAFS) was used to study the evolution of the local structure of Fe and Co as a function of annealing time in CoFeB/MgO/CoFeB magnetic tunnel junctions. EXAFS indicates B depletion and crystallization of the CoFeB layers within a few seconds of the post growth high temperature anneal. The decrease in first-shell Debye-Waller factor and hence the increase in structural order during annealing explains the increase in tunnel magnetoresistance observed as a result of post deposition annealing.

36 MATERIALS SCIENCE↗

Epitaxial growth and ferrimagnetic properties of Mn film on GaSb(100)

We report on the epitaxial stabilization and magnetic properties of Mn films on GaSb(100) using molecular beam epitaxy, a follow-up to our previous work on the growth of Mn films on GaAs(100) [Phys. Rev. B 79, 045309 (2009)]. A strong ferrimagnetic ordering was observed which was attributed to the largely expanded lattice parameter resulting from the lattice mismatch with substrate and the enhanced thermal energy with increasing growth temperature. The observed magnetic moment of 1.16{mu}{sub B}/Mn atom was several times larger than that observed in the Mn/GaAs(100) films due to the lattice constant difference of substrates. The in-plane magnetoresistance behavior demonstrated the magnetic anisotropy that might result from the slightly distorted cubic structure of {alpha}-Mn phase under low-dimensional growth.

36 MATERIALS SCIENCE↗

Reduced low frequency noise in electron beam evaporated MgO magnetic tunnel junctions

We compare low frequency noise in magnetic tunnel junctions with MgO barriers prepared by electron-beam evaporation with those prepared by radiofrequency sputtering, both showing a high tunneling magnetoresistance. The normalized noise parameter in the parallel state of junctions with evaporated barriers is at least one order of magnitude lower than that in junctions with sputtered barriers, and exhibits a weaker bias dependence. The lowest normalized noise is in the 10{sup -11} mum{sup 2} range. A lower density of oxygen vacancies acting as charge trap states in the evaporated MgO is responsible for the lower noise.

36 MATERIALS SCIENCE↗

Magnetotransport Properties of High Quality Co:ZnO and Mn:ZnO Single Crystal Pulsed Laser Deposition films: Pitfalls Associated with Magnetotransport on High Resistivity Materials

The electrical resistivity values for a series of pure and doped (Co, Mn, Al) ZnO epitaxial films grown by pulsed laser deposition were measured with equipment designed for determining the DC resistivity of high resistance samples. Room-temperature resistances ranging from 7x10^1 ohms/square to 4x10^8 ohms/square were measured on vacuum-reduced cobalt-doped ZnO, (Al,Co) co-doped ZnO, pure cobalt-doped ZnO, Mn-doped ZnO, and undoped ZnO. Using a four-point collinear geometry with gold spring-pin contacts, resistivities were measured from 295 to 5 K for resistances of < ~10^12 ohms/square. In addition, magnetoresistance (MR) and Hall effect were measured as a function of temperature for select samples. Throughout the investigation, samples were also measured on commercially available instrumentation with good agreement. The challenges of transport measurements on high resistivity samples are discussed, along with some offered solutions to those challenges.

36 MATERIALS SCIENCE↗

In situ Measurments in a Transmission Electron Microscopy on Nanomagnetic Tunnel Junctions

We showed that a chain of nanomagnetic tunnel junctions (MTJs) devices can be electrically addressed individually, in situ, in a transmission electron microscope, such that transport properties can be in principle, quantitatively correlated with each device's defects and microstructure. A unique energy barrier was obtained for each device measured. Additionally, in situ tunneling magnetoresistance (TMR) measurements were obtained for a subset of devices. We found that TMR values for our nano-MTJs were generally smaller than TMR in the unpatterned film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic memory based on La{sub 0.7}Ca{sub 0.3}MnO{sub 3}/YBa{sub 2}Cu{sub 3}O{sub 7}/La{sub 0.7}Ca{sub 0.3}MnO{sub3} ferromagnet/superconductor hybrid structures.

We report a memory concept utilizing ferromagnet/superconductor/ferromagnet La{sub 0.7}Ca{sub 0.3}MnO{sub 3}/YBa{sub 2}Cu{sub 3}O{sub 7}/La{sub 0.7}Ca{sub 0.3}MnO{sub 3} thin film hybrid structures. The orientation of the magnetic field with respect to the ferromagnetic easy axis has a strong effect on superconductivity as indicated by a strong variation in the magnetoresistance (MR). MR can be controlled by rotating a small magnetic field applied in the plane of the film in a way that is determined by the in-plane biaxial magnetic anisotropy. The proposed memory device has the advantages of superconducting detection elements (fast response and low dissipation), small (100-150 Oe) writing fields, and resistance read-out without need for applied field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Heteroepitaxy of Nd{sub 0.67}Sr{sub 0.33}MnO{sub 3} on silicon for bolometric x-ray detector application

We have recently reported the design concept and sensor fabrication for a novel bolometric x-ray detector based on a rare earth manganite material for application as a total energy monitor for the Linac Coherent Light Source (LCLS) free electron laser at the Stanford Linear Accelerator Center (SLAC). The detector employs epitaxial thin films of Nd{sub 0.67}Sr{sub 0.33}MnO{sub 3} grown on Si by pulsed laser deposition. In this paper we report details of the fabrication of the actual detector, its response characteristics under photon illumination from LCLS, and improvements in the growth scheme of the sensor material on Si using a buffer/template layer scheme that employs yttria-stabilized zirconia, cerium oxide (CeO{sub 2}), and bismuth titanate (Bi{sub 4}Ti{sub 3}O{sub 12}). The thermal sensor response changes linearly with the energy of an optical calibration laser as expected, and the signals from optical and x-ray pulses at LCLS are very similar, thereby validating the design concept. To the best of our knowledge, the LCLS detector application reported here is the first practical use of colossal magnetoresistive manganite bolometers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ultrathin Co/Pt and Co/Pd superlattice films for MgO-based perpendicular magnetic tunnel junctions

Ultrathin [Co/Pt]{sub n} and [Co/Pd]{sub n} superlattice films consisting of 0.14-0.20-nm-thick Co and Pt(Pd) layers were deposited by sputtering. A large perpendicular magnetic anisotropy [(3-9)x10{sup 6} ergs/cm{sup 3}] and an ideal square out-of-plane hysteresis loop were attained even for ultrathin superlattice films with a total thickness of 1.2-2.4 nm. The films were stable against annealing up to 370 deg. C. MgO-based perpendicular magnetic tunnel junctions with this superlattice layer as the free layer showed a relatively high magnetoresistance ratio (62%) and an ultralow resistance-area product (3.9 {Omega} {mu}m{sup 2}) at room temperature. The use of these films will enable the development of gigabit-scale nonvolatile memory.

36 MATERIALS SCIENCE↗

Evaluation of barrier uniformity in magnetic tunnel junctions prepared using natural oxidation of thin Mg layers

We fabricated submicron magnetic tunnel junctions (MTJs) using natural oxidation of thin Mg layers deposited by dc sputtering. The MTJs exhibited magnetoresistance (MR) ratios of up to about 150% with a low resistance-area product (R{sub p}A) of 8 {Omega} {mu}m{sup 2}, which are comparable to those for radio-frequency-sputtered MgO barriers. The submicron MTJs had highly variable MR and R{sub p}A values due to a high pinhole density (20 {mu}m{sup -2}) in the barriers, whereas current-in-plane-tunneling (CIPT) measurements on the same MTJ films revealed highly reproducible MR and R{sub p}A values. This indicates that reproducible CIPT measurements do not necessarily give accurate results of MR and R{sub p}A at high pinhole densities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin injection from epitaxial Fe{sub 3}O{sub 4} films to ZnO films

The fully epitaxial Fe{sub 3}O{sub 4}/ZnO heterostructures were fabricated by reactive dc sputtering (Fe{sub 3}O{sub 4}) and rf sputtering (ZnO) on c-Al{sub 2}O{sub 3} substrates. The epitaxial relationship is verified to be Fe{sub 3}O{sub 4}(111)<110>(parallel sign)ZnO(0002)<1120> by {phi} scans. The nonlinear and rectifying properties of I-V curves were observed in the heterostructures. The transport mechanism across the interface between Fe{sub 3}O{sub 4} and ZnO is thermal emission and the Schottky barrier is calculated to be 0.51 eV. The magnetoresistance of the heterostructures is symmetric and depends on current. The spin polarization of the transport electrons from Fe{sub 3}O{sub 4} into ZnO is determined to be 28.5% at 30 K.

36 MATERIALS SCIENCE↗

Fully epitaxial Fe/MgO/Fe(001) junctions with nonmagnetic metal layer insertion

Fully epitaxial Fe/Ag-wedge/MgO/Fe(001) magnetic tunnel junctions (MTJs) were prepared by using a combination of magnetron sputtering and molecular beam epitaxy, and their magneto-transport properties were investigated for the Ag thickness range of 0-9 monolayer (ML). The large tunneling magnetoresistance (TMR) ratios of up to 160% at room temperature were obtained in the Fe/MgO/Fe region (Ag: 0 ML) after the optimization of the preparation conditions. The finite TMR ratio was observed until the Ag thickness reached 4 ML, although no significant oscillation due to quantum well states (QWS) was seen. This is the first demonstration of TMR in the fully epitaxial MTJs with nonmagnetic metal layer insertion which can potentially create spin-dependent QWS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of elemental distributions on the behavior of MgO-based magnetic tunnel junctions.

Three-dimensional atom-probe tomography and transmission electron microscopy have been utilized to study the effects of Ta getter presputtering and either a Mg or Ru free-layer cap on the elemental distributions and properties of MgO-based magnetic tunnel junctions after annealing. Annealing the samples resulted in crystallization of the amorphous CoFeB layer and diffusion of the majority of the boron away from the crystallized CoFeB layers. The Ta getter presputter is found to reduce the segregation of boron at the MgO/CoFeB interface after annealing, improving the tunneling magnetoresistance of the tunnel junction. This effect is observed for samples with either a Ru free-layer cap or a Mg free-layer cap and is thought to be a result of a reduced oxygen concentration within the MgO due to the effect of Ta getter presputtering. A Ru free-layer cap provides superior magnetic and magnetotransport properties compared to a Mg free-layer cap. Mg from the Mg free-layer cap is observed to diffuse toward the MgO tunnel barrier upon annealing, degrading both the crystalline quality of the CoFeB and magnetic isolation of the CoFeB free-layer from the CoFeB reference-layer. Lateral variations in the B distribution within the CoFeB free-layer are observed in the samples with a Ru free-layer cap, which are associated with crystalline and amorphous grains. The B-rich, amorphous grains are found to be depleted in Fe, while the B-poor crystalline grains are slightly enriched in Fe.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling magnetotransport in inhomogeneous (Ge,Mn) films

We have performed numerical simulations using the finite elements method in order to investigate magnetotransport in manganese doped germanium thin films. Up to now, several groups have reported similar transport measurements on (Ge,Mn) films obtained either by low temperature molecular beam epitaxy or by manganese implantation of germanium wafers. However, different physical interpretations have been proposed, including the existence of a diluted carrier-mediated ferromagnetic phase. Here, by carefully taking into account the morphology of (Ge,Mn) films (Mn-rich ferromagnetic inclusions in a highly diluted germanium matrix), we can reproduce some experimental findings. In particular, in order to observe high positive magnetoresistance and Hall angles, there are two requirements: (i) a strong anomalous Hall effect within Mn-rich inclusions and (ii) a conductivity contrast between these inclusions and the germanium matrix. Finally, we conclude that (Ge,Mn) films behave as granular ferromagnetic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-plane and growth direction electron cyclotron effective mass in short period InAs/GaSb semiconductor superlattices

In plane and growth direction electron effective mass in short period InAs/GaSb semiconductor superlattices (SL) was measured using cyclotron resonance at different orientations of magnetic field with respect to SL growth direction. It was demonstrated that the electron spectrum near the bottom of the SL subband has 3D character, with the in-plane effective masses ranging from 0.023 m{sub 0} to 0.028 m{sub 0} and growth direction effective masses of 0.03-0.034 m{sub 0} depending on the SL period and growth conditions. The measured effective masses are close to those calculated in the weak coupling limit of the Kronig-Penney model. In this limit the SL electron effective mass is a weighted average of the electron effective masses of corresponding bulk materials. Correlation between the magnitude of cyclotron mobility, amplitude of negative magnetoresistance, and steepness of the long wavelength side of the photoluminescence spectrum indicate that the crystalline structure disorder is a major factor contributing to the momentum relaxation time of the electrons.

36 MATERIALS SCIENCE↗

Polycrystalline iron nitride films fabricated by reactive facing-target sputtering: Structure, magnetic and electrical transport properties

Structure, magnetic and electrical transport properties of the reactive sputtered iron nitride films fabricated at different substrate temperatures (T{sub s}) and nitrogen flow rates (F{sub N{sub 2}}) were investigated systematically. The single-phase polycrystalline {gamma}'-Fe{sub 4}N film was obtained at F{sub N{sub 2}} = 20 sccm and T{sub s} = 450 deg. C. The films are soft ferromagnetic at room temperature. The electrical resistivity ({rho}) of the films fabricated at different F{sub N{sub 2}} and T{sub s} decreases with the decreasing temperature, showing a metallic behavior. Meanwhile, a variety of magnetoresistance (MR) behaviors were observed depending on the applied magnetic field and measuring temperature. It can be deduced that the complex MR behaviors are dominated by Lorentz force, spin-orbit interaction, and weak localization effect.

36 MATERIALS SCIENCE↗

Synthesis and magnetic reversal of bi-conical Ni nanostructures

Template synthesis in polyethylene terephthalate (PET) membranes has been used to grow hour glass shaped nickel nanowires with a constriction in the range of tens of nanometers at the center. Anisotropic magnetoresistance measurements have been performed on a single nanowire to follow magnetization reversal of the structure. The results are explained via 3D micromagnetic simulations showing the appearance of a complex vortex state close to the constriction whose propagation depends on the angle between the cone axis and the applied field. The interest of this original growth process for spintronics is discussed.

36 MATERIALS SCIENCE↗

Experimental and first-principles study on the magnetic and transport properties of Ti-doped Fe{sub 3}O{sub 4} epitaxial films

Structure, magnetic, and transport properties of the epitaxial Fe{sub 3-x}Ti{sub x}O{sub 4} films with x{<=} 0.09 fabricated by reactive co-sputtering were investigated systematically. The lattice constant expands from 0.8360 to 0.8376 nm with x increases from 0 to 0.09. The room-temperature saturation magnetization increases by 31.7%, and the negative magnetoresistance (at 100 K) increases from 3.7% to 6.9% as x increases from 0 to 0.09. The results indicate that Ti atoms might exist at the tetrahedral sites in the spinel structure. Theoretical calculations based on the density-functional theory suggest that the doped Ti on the tetrahedral sites indeed enhances the lattice constant and magnetic moment. Meanwhile, the calculated results also imply that the Ti-doped Fe{sub 3}O{sub 4} has a high spin polarization near 100%.

36 MATERIALS SCIENCE↗

Intrinsic Ferromagnetism Observed in ZnO Thin Film

A ZnO film was deposited on a silicon wafer by magnetron sputtering, and the magnetic and the electronic properties have been studied The magnetic property measurements show that the ZnO film is ferromagnetic at room temperature. Through the magnetoresistance (MR) measurement, it is found that ZnO reveals a negative MR at 80, 50, 20, 10 and 6 K, which is induced by the weak-localization effect. However, a positive MR as large as 19.8% was observed, when temperature was reduced to 2 K. As far as the mechanism of the huge positive MR is concerned, it is suggested to be due to the spin splitting induced by the s-d-like interaction. Through the discussion on the huge positive MR, we demonstrate that the observed ferromagnetism in ZnO is intrinsic, not from external impurities.

36 MATERIALS SCIENCE↗