Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Fabrication of plastic biochips

A versatile surface functionalization procedure based on rf magnetron sputtering of silica was performed on poly(methylmethacrylate), polycarbonate, polypropylene, and cyclic olefin copolymers (Topas 6015). The hybrid thermoplastic surfaces were characterized by x-ray photoelectron spectrometer analysis and contact angle measurements. The authors then used these hybrid materials to perform a sandwich assay targeting an HIV-1 antibody using fluorescent detection and biotinylated peptides immobilized using the bioaffinity of biotin-neutravidin. They found a limit of detection similar to arrays on glass surfaces and believed that this plastic biochip platform may be used for the development of disposable immunosensing and diagnostic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical Properties of Solid Solutions In{sub x}Al{sub 1–x}N

The phase diagrams and the results of studies of the GaN, AlN and InN ternary solid solutions grown using the magnetron sputtering, molecular beam epitaxy, and metalorganic vapour-phase epitaxy technologies and intended for the production of ultrahigh-frequency InAlN/GaN HEMT transistors are analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Perpendicular magnetic anisotropy in Mn{sub 2}CoAl thin film

Heusler compound Mn{sub 2}CoAl (MCA) is attracting more attentions due to many novel properties, such as high resistance, semiconducting behavior and suggestion as a spin-gapless material with a low magnetic moment. In this work, Mn{sub 2}CoAl epitaxial thin film was prepared on MgO(100) substrate by magnetron sputtering. The transport property of the film exhibits a semiconducting-like behavior. Moreover, our research reveals that perpendicular magnetic anisotropy (PMA) can be induced in very thin Mn{sub 2}CoAl films resulting from Mn-O and Co-O bonding at Mn{sub 2}CoAl/MgO interface, which coincides with a recent theoretical prediction. PMA and low saturation magnetic moment could lead to large spin-transfer torque with low current density in principle, and thus our work may bring some unanticipated Heusler compounds into spintronics topics such as the domain wall motion and the current-induced magnetization reversal.

36 MATERIALS SCIENCE↗

Dielectric properties and tunability of cubic pyrochlore Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films

The Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films with cubic pyrochlore structure were prepared onto Pt-coated sapphire substrates by rf magnetron sputtering deposition from a stoichiometric target. Dielectric measurements indicated that the Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films exhibited low dielectric loss of {approx}0.0018-0.004, medium dielectric constant of {approx}86, and superior tunable dielectric properties at room temperature. A bias field of 1.6 MV/cm resulted in the maximum voltage tunability of 39%. A brief discussion is given on the enhanced tunability compared to Bi{sub 1.5}ZnNb{sub 1.5}O{sub 7} thin films. The low loss and superior tunability make Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films promising for potential tunable capacitor applications.

36 MATERIALS SCIENCE↗

Metastable bcc phase formation in 3d ferromagnetic transition metal thin films sputter-deposited on GaAs(100) substrates

Co{sub 100−x}Fe{sub x} and Ni{sub 100−y}Fe{sub y} (at. %, x = 0–30, y = 0–60) films of 10 nm thickness are prepared on GaAs(100) substrates at room temperature by using a radio-frequency magnetron sputtering system. The detailed growth behavior is investigated by in-situ reflection high-energy electron diffraction. (100)-oriented Co and Ni single-crystals with metastable bcc structure are formed in the early stage of film growth, where the metastable structure is stabilized through hetero-epitaxial growth. With increasing the thickness up to 2 nm, the Co and the Ni films start to transform into more stable hcp and fcc structures through atomic displacements parallel to bcc(110) slide planes, respectively. The stability of bcc phase is improved by adding a small volume of Fe atoms into a Co film. The critical thickness of bcc phase formation is thicker than 10 nm for Co{sub 100−x}Fe{sub x} films with x ≥ 10. On the contrary, the stability of bcc phase for Ni-Fe system is less than that for Co-Fe system. The critical thicknesses for Ni{sub 100−y}Fe{sub y} films with y = 20, 40, and 60 are 1, 3, and 5 nm, respectively. The Co{sub 100−x}Fe{sub x} single-crystal films with metastable bcc structure formed on GaAs(100) substrates show in-plane uniaxial magnetic anisotropies with the easy direction along GaAs[011], similar to the case of Fe film epitaxially grown on GaAs(100) substrate. A Co{sub 100−x}Fe{sub x} film with higher Fe content shows a higher saturation magnetization and a lower coercivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band offsets of TiZnSnO/Si heterojunction determined by x-ray photoelectron spectroscopy

X-ray photoelectron spectroscopy (XPS) was utilized to measure the valence band offset (ΔE{sub V}) of the TiZnSnO (TZTO)/Si heterojunction. TZTO films were deposited on Si (100) substrates using magnetron sputtering at room temperature. By using the Zn 2p{sub 3/2} and Sn 3d{sub 5/2} energy levels as references, the value of ΔE{sub V} was calculated to be 2.69 ± 0.1 eV. Combining with the experimental optical energy band gap of 3.98 eV for TZTO extracted from the UV-vis transmittance spectrum, the conduction band offset (ΔE{sub C}) was deduced to be 0.17 ± 0.1 eV at the interface. Hence, the energy band alignment of the heterojunction was determined accurately, showing a type-I form. This will be beneficial for the design and application of TZTO/Si hybrid devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characteristics of Hydrogen Sensors Based on Thin Tin Dioxide Films Modified with Platinum, Palladium, Silver, and Yttrium

The dependence of the characteristics of hydrogen sensors based on thin Pt/Pd/SnO{sub 2}:Sb, Ag, Y and Ag/SnO{sub 2}:Sb, Ag, Y films obtained by the method of magnetron sputtering at a direct current on the humidity level of the gas mixture during operation in thermal cyclic mode is investigated. The analysis of the experimental data was carried out using the expressions obtained on the basis of the dissociative adsorption model of hydrogen and water molecules on the SnO{sub 2} surface, taking into account the presence of three types of adsorbed particles: O{sup –}, OH, OН{sup –}. The use of complex modifiers Pt/Pd, Ag on the surface and Ag + Y in the bulk of tin dioxide films allows to reduce the influence of humidity on the characteristics of sensors. The role of these modifying additives in the process of dissociative adsorption of hydrogen molecules on the surface of SnO{sub 2} films in humid environment is established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel plasma immersion ion implantation and deposition hardware and technique based on high power pulsed magnetron discharge

A novel plasma immersion ion implantation technique based on high power pulsed magnetron sputtering (HPPMS) discharge that can produce a high density metal plasma is described. The metal plasma is clean and does not suffer from contamination from macroparticles, and the process can be readily scaled up for industrial production. The hardware, working principle, and operation modes are described. A matching circuit is developed to modulate the high-voltage and HPPMS pulses to enable operation under different modes such as simultaneous implantation and deposition, pure implantation, and selective implantation. To demonstrate the efficacy of the system and technique, CrN films with a smooth and dense surface without macroparticles were produced. An excellent adhesion with a critical load of 59.9 N is achieved for the pure implantation mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of breakdown voltage of indium-gallium-zinc-oxide-based Schottky diode

In contrast to the intensive studies on thin-film transistors based on indium gallium zinc oxide (IGZO), the research on IGZO-based diodes is still very limited, particularly on their behavior and stability under high bias voltages. Our experiments reveal a sensitive dependence of the breakdown voltage of IGZO Schottky diodes on the anode metal and the IGZO film thickness. Devices with an Au anode are found to breakdown easily at a reverse bias as low as −2.5 V, while the devices with a Pd anode and a 200-nm, fully depleted IGZO layer have survived up to −15 V. All diodes are fabricated by radio-frequency magnetron sputtering at room temperature without any thermal treatment, yet showing an ideality factor as low as 1.14, showing the possibility of achieving high-performance Schottky diodes on flexible plastic substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of homologous In{sub 2}O{sub 3}(ZnO){sub m} thin films and its thermoelectric properties

Homologous In{sub 2}O{sub 3}(ZnO){sub 5} thin films were produced on a synthetic quartz glass substrate by thermal annealing of magnetron sputtered In{sub 2}O{sub 3}-ZnO compound films. When the annealing temperature was increased to 700 °C, the sputtered In{sub 2}O{sub 3}-ZnO film with In{sub 2}O{sub 3} microcrystalline changed to a c-oriented homologous In{sub 2}O{sub 3}(ZnO){sub 5} structure, for which the crystallization is suggested to begin from the surface and proceed along with the film thickness. The annealing temperature of 700 °C to form the In{sub 2}O{sub 3}(ZnO){sub 5} structure was substantially lower than temperatures of conventional solid state synthesis from In{sub 2}O{sub 3} and ZnO powders, which is attributed to the rapid diffusional transport of In and Zn due to the mixing of In{sub 2}O{sub 3} and ZnO in the atomic level for sputtered In{sub 2}O{sub 3}-ZnO compound films. The homologous structure collapsed at temperatures above 900 °C, which is attributed to (1) zinc vaporization from the surface and (2) a gradual increase of zinc silicate phase at the interface. This c-oriented layer structure of homologous In{sub 2}O{sub 3}(ZnO){sub 5} thin films along the film thickness allowed the thin film to reach a power factor of 1.3 × 10{sup −4} W/m K{sup 2} at 670 °C, which is comparable with the reported maximum value for the textured In{sub 2}O{sub 3}(ZnO){sub 5} powder (about 1.6 × 10{sup −4} W/m K{sup 2} at 650 °C).

36 MATERIALS SCIENCE↗

Effect of temperature on the current (capacitance and conductance)–voltage characteristics of Ti/n-GaAs diode

In this study, Ti/n-GaAs Schottky barrier diode has been fabricated by DC magnetron sputtering. The current–voltage, capacitance–voltage, and conductance–voltage characteristics of Ti/n–GaAs diode have been investigated in the temperature range of 80–320 K. The ideality factor and barrier height values have been calculated from the forward current–voltage characteristics. The variation of the diode parameters with the sample temperature has been attributed to the presence of the lateral inhomogeneities of the barrier height. The temperature dependent capacitance–voltage characteristics have been measured to calculate the carrier concentration, diffusion potential, barrier height, and temperature coefficient of the barrier height (α = −0.65 meV K{sup −1}). The fact that the temperature coefficient of the barrier height changes from metal to metal has been ascribed to the chemical nature of the contact metal or metal electronegativity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fabrication of Ohmic contact on semi-insulating 4H-SiC substrate by laser thermal annealing

The Ni contact layer was deposited on semi-insulating 4H-SiC substrate by magnetron sputtering. The as-deposited samples were treated by rapid thermal annealing (RTA) and KrF excimer laser thermal annealing (LTA), respectively. The RTA annealed sample is rectifying while the LTA sample is Ohmic. The specific contact resistance (ρ{sub c}) is 1.97 × 10{sup −3} Ω·cm{sup 2}, which was determined by the circular transmission line model. High resolution transmission electron microscopy morphologies and selected area electron diffraction patterns demonstrate that the 3C-SiC transition zone is formed in the near-interface region of the SiC after the as-deposited sample is treated by LTA, which is responsible for the Ohmic contact formation in the semi-insulating 4H-SiC.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultra-precision fabrication of 500 mm long and laterally graded Ru/C multilayer mirrors for X-ray light sources

X-ray mirrors are needed for beam shaping and monochromatization at advanced research light sources, for instance, free-electron lasers and synchrotron sources. Such mirrors consist of a substrate and a coating. The shape accuracy of the substrate and the layer precision of the coating are the crucial parameters that determine the beam properties required for various applications. In principal, the selection of the layer materials determines the mirror reflectivity. A single layer mirror offers high reflectivity in the range of total external reflection, whereas the reflectivity is reduced considerably above the critical angle. A periodic multilayer can enhance the reflectivity at higher angles due to Bragg reflection. Here, the selection of a suitable combination of layer materials is essential to achieve a high flux at distinct photon energies, which is often required for applications such as microtomography, diffraction, or protein crystallography. This contribution presents the current development of a Ru/C multilayer mirror prepared by magnetron sputtering with a sputtering facility that was designed in-house at the Helmholtz-Zentrum Geesthacht. The deposition conditions were optimized in order to achieve ultra-high precision and high flux in future mirrors. Input for the improved deposition parameters came from investigations by transmission electron microscopy. The X-ray optical properties were investigated by means of X-ray reflectometry using Cu- and Mo-radiation. The change of the multilayer d-spacing over the mirror dimensions and the variation of the Bragg angles were determined. The results demonstrate the ability to precisely control the variation in thickness over the whole mirror length of 500 mm thus achieving picometer-precision in the meter-range.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of substrate temperature and gas flow ratio on the nanocomposite TiAlBN coating

Nanocomposite TiAlBN (nc-TiAlBN) coatings were successfully deposited via RF magnetron sputtering by varying the nitrogen-to-total gas flow ratio (R{sub N}), and substrate temperature (T{sub S}). All coatings were deposited on AISI 316 substrates using single Ti-Al-BN hot-pressed disc as a target. The grain size, phases, and chemical composition of the coatings were evaluated using glancing angle X-ray diffraction analysis (GAXRD) and X-ray photoelectron spectroscopy (XPS). Results showed that the grains size of the deposited nc-TiAlBN coatings were in the range of 3.5 to 5.7 nm and reached a nitride saturation state as early as 15 % R{sub N}. As the nitrogen concentration decreases, boron concentration increased from 9 at.% to 16.17 at.%. and thus, increase the TiB{sub 2} phase within the coatings. The T{sub S}, however, showed no significant effect either on the crystallographic structure, grain size, or in the chemical composition of the deposited nc-TiAlBN coating.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Soft Landing of Complex Molecules on Surfaces

Mass spectrometry is a versatile technique for identification and structural characterization of large molecules. The advent of soft ionization techniques such as electrospray (ESI) (1-2) has enabled ionization of a wide variety of complex molecules without significant \fragmentation while non-thermal ion sources such as laser vaporization (3-4) and magnetron sputtering (5-6) have provided access to materials that cannot, currently, be produced through conventional techniques. Most mass spectrometry studies rely on ionization of a molecule of interest or a complex mixture followed by mass analysis. Alternatively, mass spectrometry may be used as a preparatory technique, in which mass-selected ions are deposited onto solid supports or into liquid materials (7-18). Preparatory mass spectrometry offers several unique advantages for deposition of complex molecules on substrates including the ability to generate high-purity uniform films (19-20), unprecedented selectivity and specificity of preparation of deposited species (11, 21-22), the ability to focus and pattern an ion beam (23-24), and flexibility in both ion formation (1, 3, 25-26) and mass selection (27-32) processes. This review will highlight applications of mass-selected deposition of complex molecules for selective immobilization of biological molecules and catalytically active complexes on substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring the crystal structure of TiO{sub 2} thin films from the anatase to rutile phase

TiO{sub 2} films with various Sn concentrations were deposited on quartz substrates using rf reactive magnetron sputtering. The crystal structure was investigated by using x-ray diffraction, Raman spectroscopy, and transmission electron microscopy, and the chemical states of Ti and Sn were analyzed by x-ray absorption near edge structure (XANES) spectroscopy. Without Sn doping, TiO{sub 2} films change the crystal structure from rutile to anatase as the total gas pressure increases in the sputtering deposition. On the other hand, Sn doping induces the transformation of TiO{sub 2} crystalline structure from anatase to rutile phase, where the XANES spectra implied that Sn substitutes into Ti site of rutile TiO{sub 2}. Atomic force microscope analyses revealed that the Sn-doped TiO{sub 2} films exhibited a flat surface with the roughness of approximately 2 nm.

36 MATERIALS SCIENCE↗

Control of bombardment energy and energetic species toward a superdense titanium nitride film

TiN deposited by dc magnetron sputtering has been widely used as a hard mask material for dielectric patterning in multilevel Cu interconnects. Typically inside a ''poison-mode'' regime, the film density is 4.5-4.9 g/cm{sup 3}. The microstructure, varying from columnar structure to nanocrystalline, is controlled by both thermodynamics and surface kinetics through ionization, substrate bias, target voltage, etc. A relatively low density film can be correlated with a porous columnar structure, low mechanical robustness, and weak resistance to plasma etching. However, with controlled growth, an applied substrate bias does not create resputtering and crystal defects. Instead, the authors create film with a maximum density of 5.3 g/cm{sup 3}. In this high density film, carrier scatterings through grain boundary are greatly suppressed and the film resistivity is as low as 95 {mu}{Omega} cm, which brings additional benefits as a conductive capping layer. As it is deposited at room temperature, the process minimizes the thermal budget to the underlying low-k dielectric materials to be patterned.

36 MATERIALS SCIENCE↗

IMPURITY AND TRACER DIFFUSION STUDIES IN MAGNESIUM AND ITS ALLOYS

An Integrated Computational Materials Engineering (ICME) approach for optimizing processing routes for Mg-alloys requires reliable thermodynamic and diffusion databases. We are developing an impurity and tracer diffusion database using both stable and unstable isotopes for Mg and its alloys. In this study, Al impurity diffusion in pure polycrystalline Mg (99.9%) was examined using the thin film method. Approximately 500 nm thick Al films were deposited on in-situ RF plasma-cleaned polycrystalline Mg by DC magnetron sputtering from pure Al (99.9%) targets. Specimens were then diffusion annealed at 300, 350 and 400 C in quartz capsules that were evacuated to 10-8 Torr and backfilled with Ar-H2 mixtures. Concentration profile of Al diffusion profiles into single phase Mg was determined by depth-profiling technique using secondary ion mass spectroscopy. The Al impurity diffusion coefficients were determined as a function of temperature

36 MATERIALS SCIENCE↗