Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microscopic simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Evolution Mechanism of Inclusions in Medium-Manganese Steel by Mg Treatment with Different Aluminum Contents

To investigate the effect of magnesium addition on the evolution of inclusions in medium-manganese steel with different aluminum contents, both thermodynamic calculation and high-temperature simulation experiments were carried out in the present work. The in situ observation experiments were used to clarify the related evolution process of inclusions. The samples taken from the melts were analyzed by scanning electron microscopy and energy dispersive spectroscopy. The compositions of steel were determined by inductively coupled plasma-optical emission spectrometer. The results show that the aluminum content in steel has a certain influence on the magnesium content, under the same conditions, magnesium content increases with increasing aluminum content. The inclusions transformed from MnO·Al{sub 2}O{sub 3} to Al{sub 2}O{sub 3} when the aluminum content was higher than 0.0076 mass pct. After magnesium treatment, the inclusions gradually transformed into MgO·Al{sub 2}O{sub 3}, and the MgO/Al{sub 2}O{sub 3} mole ratio in inclusions decreased with the increase of aluminum content. The diameter of the inclusions decreased, and number density of inclusions increased in steel after magnesium addition. The phenomenon that large-sized cluster-like Al{sub 2}O{sub 3} inclusions transform into finely dispersed Mg-containing inclusions was firstly observed in situ by confocal laser scanning microscope.

36 MATERIALS SCIENCE↗

Conservative projection-based data-driven model order reduction of a fluid-kinetic spectral solver

Kinetic simulations are computationally intensive due to six-dimensional phase space discretization. Many kinetic spectral solvers use the asymmetrically weighted Hermite expansion due to its conservation and fluid-kinetic coupling properties, i.e., the lower-order Hermite moments capture and describe the macroscopic fluid dynamics, and higher-order Hermite moments describe the microscopic kinetic dynamics. We leverage this structure by developing a parametric data-driven reduced-order model based on the proper orthogonal decomposition, which projects the higher-order kinetic moments while retaining the fluid moments intact. We demonstrate analytically and numerically that the method ensures local and global mass, momentum, and energy conservation. The numerical results show that the proposed method effectively replicates the high-dimensional spectral simulations at a fraction of the computational cost and memory, as validated on the weak Landau damping and two-stream instability benchmark problems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Machine-learning-based inversion of nuclear responses

A microscopic description of the interaction of atomic nuclei with external electroweak probes is required for elucidating aspects of short-range nuclear dynamics and for the correct interpretation of neutrino oscillation experiments. Nuclear quantum Monte Carlo methods infer the nuclear electroweak response functions from their Laplace transforms. Inverting the Laplace transform is a notoriously ill-posed problem; and Bayesian techniques, such as maximum entropy, are typically used to reconstruct the original response functions in the quasielastic region. In this work, we present a physics-informed artificial neural network architecture suitable for approximating the inverse of the Laplace transform. Utilizing simulated, albeit realistic, electromagnetic response functions, we show that this physics-informed artificial neural network outperforms maximum entropy in both the low-energy transfer and the quasielastic regions, thereby allowing for robust calculations of electron scattering and neutrino scattering on nuclei and inclusive muon capture rates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fabrication of nanotube arrays on commercially pure titanium and their apatite-forming ability in a simulated body fluid

In this study, we investigated self-organized TiO{sub 2} nanotubes that were grown using anodization of commercially pure titanium at 5 V or 10 V in NH{sub 4}F/NaCl electrolyte. The nanotube arrays were annealed at 450 °C for 3 h to convert the amorphous nanotubes to anatase and then they were immersed in simulated body fluid at 37 °C for 0.5, 1, and 14 days. The purpose of this experiment was to evaluate the apatite-formation abilities of anodized Ti nanotubes with different tube diameters and lengths. The nanotubes that formed on the surfaces of Ti were examined using a field emission scanning electron microscope, X-ray diffraction, and X-ray photoelectron spectroscope. When the anodizing potential was increased from 5 V to 10 V, the pore diameter of the nanotube increased from approximately 24–30 nm to 35–53 nm, and the tube length increased from approximately 590 nm to 730 nm. In vitro testing of the heat-treated nanotube arrays indicated that Ca-P formation occurred after only 1 day of immersion in simulated body fluid. This result was particularly apparent in the samples that were anodized at 10 V. It was also found that the thickness of the Ca-P layer increases as the applied potential for anodized c.p. Ti increases. The average thickness of the Ca-P layer on Ti that was anodized at 5 V and 10 V was approximately 170 nm and 190 nm, respectively, after immersion in simulated body fluid for 14 days. - Highlights: • TiO{sub 2} nanotube on Ti surface was formed by anodic oxidation in a NaCl/NH{sub 4}F solution. • TiO{sub 2} layers show a tube length of 590 nm and 730 nm at 5 V and 10 V, respectively. • After soaking in SBF, Ca-P layer completely covered the entire nanotubular surfaces. • The Ca-P layer was thicker on the Ti surface anodized at 10 V.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Top-Down Fabrication of Atomic Patterns in Twisted Bilayer Graphene

Atomic-scale engineering typically involves bottom-up approaches, leveraging parameters such as temperature, partial pressures, and chemical affinity to promote spontaneous arrangement of atoms. These parameters are applied globally, resulting in atomic-scale features scattered probabilistically throughout the material. In a top-down approach, different regions of the material are exposed to different parameters, resulting in structural changes varying on the scale of the resolution. In this work, the application of global and local parameters is combined in an aberration-corrected scanning transmission electron microscope (STEM) to demonstrate atomic-scale precision patterning of atoms in twisted bilayer graphene. The focused electron beam is used to define attachment points for foreign atoms through the controlled ejection of carbon atoms from the graphene lattice. The sample environment is staged with nearby source materials such that the sample temperature can induce migration of the source atoms across the sample surface. Under these conditions, the electron-beam (top-down) enables carbon atoms in the graphene to be replaced spontaneously by diffusing adatoms (bottom-up). Using image-based feedback control, arbitrary patterns of atoms and atom clusters are attached to the twisted bilayer graphene with limited human interaction. Finally, the role of substrate temperature on adatom and vacancy diffusion is explored by first-principles simulations.

36 MATERIALS SCIENCE↗

Analysis of 440 GeV proton beam–matter interaction experiments at the High Radiation Materials test facility at CERN

In a previous paper [Schmidt et al., Phys. Plasmas 21, 080701 (2014)], we presented the first results on beam–matter interaction experiments that were carried out at the High Radiation Materials test facility at CERN. In these experiments, extended cylindrical targets of solid copper were irradiated with beam of 440 GeV protons delivered by the Super Proton Synchrotron (SPS). The beam comprised of a large number of high intensity proton bunches, each bunch having a length of 0.5 ns with a 50 ns gap between two neighboring bunches, while the length of this entire bunch train was about 7 μs. These experiments established the existence of the hydrodynamic tunneling phenomenon the first time. Detailed numerical simulations of these experiments were also carried out which were reported in detail in another paper [Tahir et al., Phys. Rev. E 90, 063112 (2014)]. Excellent agreement was found between the experimental measurements and the simulation results that validate our previous simulations done using the Large Hadron Collider (LHC) beam of 7 TeV protons [Tahir et al., Phys. Rev. Spec. Top.--Accel. Beams 15, 051003 (2012)]. According to these simulations, the range of the full LHC proton beam and the hadronic shower can be increased by more than an order of magnitude due to the hydrodynamic tunneling, compared to that of a single proton. This effect is of considerable importance for the design of machine protection system for hadron accelerators such as SPS, LHC, and Future Circular Collider. Recently, using metal cutting technology, the targets used in these experiments have been dissected into finer pieces for visual and microscopic inspection in order to establish the precise penetration depth of the protons and the corresponding hadronic shower. This, we believe will be helpful in studying the very important phenomenon of hydrodynamic tunneling in a more quantitative manner. The details of this experimental work together with a comparison with the numerical simulations are presented in this paper.

36 MATERIALS SCIENCE↗

Facile Tensile Testing Platform for In Situ Transmission Electron Microscopy of Nanomaterials

In situ tensile testing using transmission electron microscopy (TEM) is a powerful technique to probe structure-property relationships of materials at the atomic scale. In this work, a facile tensile testing platform for in situ characterization of materials inside a transmission electron microscope is demonstrated. The platform consists of: 1) a commercially available, flexible, electron-transparent substrate (e.g., TEM grid) integrated with a conventional tensile testing holder, and 2) a finite element simulation providing quantification of specimen-applied strain. The flexible substrate (carbon support film of the TEM grid) mitigates strain concentrations usually found in free-standing films and enables in situ straining experiments to be performed on materials that cannot undergo localized thinning or focused ion beam lift-out. The finite element simulation enables direct correlation of holder displacement with sample strain, providing upper and lower bounds of expected strain across the substrate. The tensile testing platform is validated for three disparate material systems: sputtered gold-palladium, few-layer transferred tungsten disulfide, and electrodeposited lithium, by measuring lattice strain from experimentally recorded electron diffraction data. The results show good agreement between experiment and simulation, providing confidence in the ability to transfer strain from holder to sample and relate TEM crystal structural observations with material mechanical properties.

2D materials↗

Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel

Controlled austenite decomposition in a cold-rolled steel was carried out in a hot-dip process simulator with different inter-critical annealing process parameters to produce dual-phase steel consisting of martensite phase fraction above 50%. The evolving microstructure was characterized by using scanning electron microscope and electron backscattered diffraction techniques. Macro- and micro-texture was characterized by using x-ray diffraction and electron backscattered diffraction techniques, respectively. Uniaxial tensile deformation showed a very good combination of ultra-high strength above 900 MPa with uniform elongation of above 7%. An anomalous increase in ductility was observed for steel with high martensite volume fraction of 62.2% compared to that of lower fraction of 52.3%, indicating the influence of size and spatial distribution arrangement of ferrite and martensite phases. The enhancement in the ductility with high strength was attributed to the improved plastic deformability of hard fine martensite phase along with fine ferrite surrounding it. The nature of micro- and macro-texture was also found to affect strain partitioning compatibility between ferrite and martensite in this study.

36 MATERIALS SCIENCE↗

Effect of heat treatment on microstructural evolution and hardness homogeneity in laser powder bed fusion of alloy 718

The thermal history developed in laser powder bed fusion (LPBF) processes has been shown to be complex resulting in equally complex microstructures and mechanical properties. Microscopic observations and Vickers micro-hardness mapping measurements were carried out on diff ;erent section planes of LPBF alloy 718 cuboids. Three-dimensional finite element analysis was used to simulate thermal history and to predict the residual stress distribution in the as-built material. Computational thermodynamics was used to predict the micro-segregation and nucleation driving force of various phases in the bulk and in segregated regions. Varied heat-treatments such as simulated hot isostatic pressing, and double aging were applied. Their influence on the microstructure, microsegregation, precipitate formation, and micro-hardness variations of LPBF alloy 718 were investigated. Hardness map results showed heterogeneous micro-hardness on the xy- and xz-planes of the as-built parts where the bottom plane and center regions had larger hardness of ~315 HV 0.5 while the top plane and contours showed hardness of ~300 HV 0.5 . It was found that the aging treatment increased the overall hardness of the as-built condition from ~310 HV 0.5 to 470 HV 0.5 but also increased the hardness gradient throughout the coupon. After simulated hot isostatic pressing process (i.e., without applied pressure) at 1020 °C for 4 h followed by water quench (HIPWQ), the hardness gradient and hardness was minimized (~210 HV 0.5 ) as the microstructure transitioned from heterogeneous columnar grains in the as-built condition to more uniform recrystallized grains. A double aging treatment was applied to enhance hardness from ~210 HV 0.5 to ~440 HV 0.5 . Finally, HIPWQ followed by double aging produced a homogeneous microstructure and more uniform hardness map with enhanced mechanical properties in LPBF alloy 718 coupons.

36 MATERIALS SCIENCE↗

Sample shape and boundary dependence of measured transverse thermal properties

In spite of increased interest in thermal Hall measurements for the analysis of insulating quantum materials, there remains large uncertainty in such measurements due to contact misalignment. In this paper, we propose that sample geometry and uncertain boundary conditions provide an additional source of uncertainty in the measurement of $D_{xy}$ or $κ_{xy}$. By running simple simulations in an open source finite-element solver, we demonstrate that measured $D_{xy}$ can be changed by a non-negligible fraction in samples with similar width and length. This geometric corrective factor depends on the distinction between a uniform heat flow and constant temperature boundary couplings to a bath. Sample geometry and boundary conditions can be accounted for through simulation or by using rectangular samples to make thermal Hall measurements more reliable and reproducible. Finally, we detail a contactless optical method for measuring $D_{xy}$ based on an existing photothermal microscope technique. This method is insensitive to the longitudinal diffusivity pollution caused by contact misalignment.

36 MATERIALS SCIENCE↗

Deformation and Fracture in Complex-Shaped Energetic Particles

A new technical basis on the mechanics of energetic materials at the individual particle scale has been developed. Despite these particles being in most of our Sandia non-nuclear explosive components, we have historically lacked any understanding of particle behavior. Through the novel application of nanoidentation methods to single crystal films and single particles of energetic materials with complex shapes, discovery data has been collected elucidating phenomena of particle strength, elastic and plastic deformation, and fracture. This work specifically developed the experimental techniques and analysis methodologies to distill data into relationships suitable for future integration into particle level simulations of particle reassembly. This project utilized experimental facilities at CINT and the Explosive Components Facility to perform ex-situ and in-situ nanoidentation experiments with simultaneous scanning electron microscope (SEM) imaging. Data collected by an applied axial compressive load in either force-control or displacement-control was well represented by Hertzian contact theory for linear elastic materials. Particle fracture phenomenology was effectively modeled by an empirical damage model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Three-dimensional super line-localization in low signal-to-noise microscope images via prior-apprised unsupervised learning (PAUL)

Biological processes such as processive enzyme turnover and intracellular cargo tracking involve the dynamic motion of a small "article" along a curvilinear biopolymer track. To understand these processes that occur across multiple length and time scales, one must acquire both the trajectory of the particle and the position of the track along which it moves, possibly by combining high-resolution single-particle tracking with conventional microscopy. Yet, usually there is a significant resolution mismatch between these modalities: while the tracked particle is localized with a precision of 10 nm, the image of the surroundings is limited by optical difraction, with 200 nm lateral and 500 nm axial resolutions. Compared to the particle's trajectory, the surrounding curvilinear structure appears as a blurred and noisy image. This disparity in the spatial resolutions of the particle trajectory and the surrounding curvilinear structure image makes data reconstruction, as well as interpretation, particularly challenging. Analysis is further complicated when the curvilinear structures are oriented arbitrarily in 3D space. Here, we present a prior-apprised unsupervised learning (PAUL) approach to extract information from 3D images where the underlying features resemble a curved line such as a filament or microtubule. This three-stage framework starts with a Hessian-based feature enhancement, which is followed by feature registration, where local line segments are detected on repetitively sampled subimage tiles. In the final stage, statistical learning, segments are clustered based on their geometric relationships. Principal curves are then approximated from each segment group via statistical tools including principal component analysis, bootstrap and kernel transformation. This procedure is characterized on simulated images, where sub-voxel medium deviations from true curves have been achieved. The 3D PAUL approach has also been implemented for successful line localization in experimental 3D images of gold nanowires obtained using a multifocal microscope. Lastly, this work not only bridges the resolution gap between two microscopy modalities, but also allows us to conduct 3D super line-localization imaging experiments, without using super-resolution techniques.

42 ENGINEERING↗

Multi-Physics Simulation of The TRIGA Reactor

In nuclear engineering, the description of phenomena occurring in the core involves a coupling between neutronic and thermal hydraulics through the so called reactivity or thermal feedback. In water cooled reactor, thermal feedback and temperature coefficients of reactivity are important, when temperature changes, microscopic cross sections change as well impacting directly the neutron flux and so the thermal power. Other feedback, such as the variation of the macroscopic cross section due to a modification of the density can also have a significant impact on the core performance of the reactor. Those reasons were naturally leading in the development of coupling method in order to predict correctly the behaviour of the core in normal operation and accidental situation. This work describes the coupling scheme developed for the description of the TRIGA mark II reactor at JSI. The demonstration case presented here, the reactor is operating in steady state configuration at several power levels. The aim of our calculation was, for a given thermal power of the reactor, to numerically reproduce fuel temperature value monitored during reactor operation. The expected impact of the control rod on the neutron flux distribution was also verified. The predictions of the coupling scheme seem to be correct according to the few temperature measurements available and the expected neutron flux behaviour expecting from a control rod motion. We are considering precise measurement of the fuel temperature at more positions but also in the coolant channels between the fuel elements to complete the experimental validation phase. An upgrade of the coupling scheme into the transient mode is also considered to observe self-stabilisation of the power level, after a control rod perturbation, due to the negative temperature reactivity coefficient of the fuel. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Hydrogen diffusion and segregation during solid phase epitaxial regrowth of preamorphized Si

The redistribution of hydrogen during solid phase epitaxial regrowth (SPER) of preamorphized silicon has been experimentally investigated, modeled, and simulated for different H concentrations and temperatures. H was introduced by H implantation and/or infiltration from the sample surface during partial thermal anneals in air in the 520–620 °C temperature range. We characterized the time evolution of the H redistribution by secondary ion mass spectrometry and time resolved reflectivity. The good agreement between all experimental data and the simulations by means of full rate equation numerical calculations allows the quantitative assessment of all the phenomena involved: in-diffusion from annealing atmosphere and the H effect on the SPER rate. We describe the temperature dependence of microscopic segregation of H at the amorphous/crystal (a-c) interface. Only a fraction of H atoms pushed by the a-c interface can be incorporated into the crystal bulk. We propose an energetic scheme of H redistribution in amorphous Si. The segregation of H at the a-c interface is also considered for (110) and (111) orientated substrates. Our description can also be applied to other material systems in which redistribution of impurities during a solid-solid phase transition occurs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Opposite photo-induced deformations in azobenzene-containing polymers with different molecular architecture: Molecular dynamics study

Photo-induced deformations in azobenzene-containing polymers (azo-polymers) are central to a number of applications, such as optical storage and fabrication of diffractive elements. The microscopic nature of the underlying opto-mechanical coupling is yet not clear. In this study, we address the experimental finding that the scenario of the effects depends on molecular architecture of the used azo-polymer. Typically, opposite deformations in respect to the direction of light polarization are observed for liquid crystalline and amorphous azo-polymers. In this study, we undertake molecular dynamics simulations of two different models that mimic these two types of azo-polymers. We employ hybrid force field modeling and consider only trans-isomers of azobenzene, represented as Gay-Berne sites. The effect of illumination on the orientation of the chromophores is considered on the level of orientational hole burning and emphasis is given to the resulting deformation of the polymer matrix. We reproduce deformations of opposite sign for the two models being considered here and discuss the relevant microscopic mechanisms in both cases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A strong nonequilibrium bound for sorting of cross-linkers on growing biopolymers

Significance Understanding the connection between microscopic driving forces in biological systems and their emergent structures remains an outstanding challenge. We tackle this problem by deriving a fluctuation–response bound in the context of actin polymerization and bundling and verify its robustness far from equilibrium through simulation. Our results show how actin polymerization, molecular fluxes of cross-linker binding, and the morphology of the growing bundle are associated quantitatively; when the bound is saturated, it becomes a nonequilibrium linear-response relation. Molecular driving forces are difficult to measure directly in biological systems, and this work represents a first step toward estimating them from experimentally accessible quantities such as molecular fluxes and compositions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗