Search NASA⌕ Search

SEARCH · Search NASA

Results for “OPTICAL MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Phase-Modulation Gas-Correlation Spectroscopy

Electro-optic phase-modulation gas-correlation spectroscopy demonstrated in laboratory tests promising candidate technique for remote sensing of gases, temperatures, and wind velocities in atmosphere. In technique radiation emitted by sample atmosphere passed through electro-optic phase modulator, and modulated and unmodulated versions of spectrum alternately passed through reference absorption cell containing gas to be detected. Radiation emerging from reference cell band-pass filtered and detected. Correlation signal is difference in intensity between phase-modulated and unmodulated detected signals.

Rider, David M.↗

Beams, brightness, and background: Using active spectroscopy techniques for precision measurements in fusion plasma research

The use of an injected neutral beam-either a dedicated diagnostic beam or the main heating beams-to localize and enhance plasma spectroscopic measurements can be exploited for a number of key physics issues in magnetic confinement fusion research, yielding detailed profile information on thermal and fast ion parameters, the radial electric field, plasma current density, and turbulent transport. The ability to make these measurements has played a significant role in much of our recent progress in the scientific understanding of fusion plasmas. The measurements can utilize emission from excited state transitions either from plasma ions or from the beam atoms themselves. The primary requirement is that the beam 'probe' interacts with the plasma in a known fashion. Advantages of active spectroscopy include high spatial resolution due to the enhanced localization of the emission and the use of appropriate imaging optics, background rejection through the appropriate modulation and timing of the beam and emission collection/detection system, and the ability of the beam to populate emitter states that are either nonexistent or too dim to utilize effectively in the case of standard or passive spectroscopy. In addition, some active techniques offer the diagnostician unique information because of the specific quantum physics responsible for the emission. This paper will describe the general principles behind a successful active spectroscopic measurement, emphasize specific techniques that facilitate the measurements and include several successful examples of their implementation, briefly touching on some of the more important physics results. It concludes with a few remarks about the relevance and requirements of active spectroscopic techniques for future burning plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Subterahertz self-oscillations of depletion of electron populations in the conduction band of GaAs in the presence of pumping and intrinsic stimulated radiation

It was previously found that, during picosecond optical pumping, ultrafast interrelated self-modulations of fundamental absorption of light and intrinsic stimulated picosecond radiation emerge in GaAs. In this study, quantitative evaluations confirming the assumption that the mentioned self-modulations are caused by self-oscillations of depletion of electron populations in the conduction band are made. The relation for the frequency of self-oscillations of depletion of populations is obtained. The presence of conditions for self-organization leading to the emergence of periodic nonlinear waves in nonequilibrium media, which is photogenerated electron-hole plasma with depletions of populations, is shown. As a result, in a series of studies, including this one, it is found that the collective excitation of charge carriers-self-oscillations of depletion of populations of the conduction band-emerges during pumping in GaAs under the effect of intrinsic stimulated radiation.

36 MATERIALS SCIENCE↗

Modulation of microstructure and optical properties of Mo-doped ZnO thin films by substrate temperature

Highlights: • Mo-doped ZnO films are obtained by sputtering at various substrate temperatures. • High-quality MZO thin films with good crystalline have been obtained at 200 °C. • Deposition temperature affects the amount of defects in the crystalline structure - Abstract: Mo-doped ZnO(MZO) films were deposited on Si (1 1 1) substrates by radio frequency sputtering at different substrate temperatures of 200, 300 and 400 °C. The effect of the substrate temperature on the structural and optical properties of the MZO films has been investigated. X-ray diffraction results reveal that all the films are polycrystalline with a hexagonal wurtzite structure with a preferential orientation according to the direction (0 0 2) plane. The crystallinity and surface morphologies of the films are strongly dependent on the growth temperature, which in turn exerts a great effect on microstructural and optical properties of the MZO films. The optical absorption measurements show high ultraviolet (UV) absorbance property of MZO with sharp and intense absorption band in this region and the optical band gap (E{sub g}) are 3.18, 3.22, 3.25 and 3.21 eV for the films deposited at room temperature, 200, 300 and 400 °C. The photoluminescence (PL) intensity of a strong broad violet–blue emission from MZO nanostructures with increasing deposited temperature was also observed. X-ray photoelectron spectroscopy (XPS) was employed to investigate the surface chemical composition of growth products.

36 MATERIALS SCIENCE↗

Electronic heterodyne recording and processing of optical holograms using phase modulated reference waves

The use of a phase-modulated reference wave for the electronic heterodyne recording and processing of a hologram is described. Heterodyne recording is used to eliminate the self-interference terms of a hologram and to create a Leith-Upatnieks hologram with coaxial object and reference waves. Phase modulation is also shown to be the foundation of a multiple-view hologram system. When combined with hologram scale transformations, heterodyne recording is the key to general optical processing. Spatial filtering is treated as an example.

Decker, A. J.↗

Buried-Electrode Hybrid Bonded Thin-Film Lithium Niobate Electro-Optic Mach-Zehnder Modulators

Hybrid bonded silicon nitride thin-film lithium niobate (TFLN) Mach-Zehnder modulators (MZMs) at 1310 nm were designed with metal coplanar waveguide electrodes buried in the silicon-on-insulator (SOI) chip. Here, the MZM devices showed greatly improved performance compared to earlier devices of a similar design, and similar performance to comparable MZM devices with gold electrodes made on top of the TFLN layer. Both devices achieve a 3-dB electro-optic bandwidth greater than 110 GHz and voltage-driven optical extinction ratios greater than 28 dB. Half-wave voltage-length products (VπL) of 2.8 and 2.5 V∙ cm were measured for the 0.5 and 0.4 cm long buried metal and top gold electrode MZMs, respectively.

42 ENGINEERING↗

Transmitting Reference Radio Signals On Two Optical Carriers

Radio-frequency reference signal used to modulate two optical carriers at transmitter. Dispersion in optical-fiber or free-space transmission medium, used to advantage in receiver to measure and compensate for phase and frequency fluctuations induced by fluctuations in propagation conditions. Corrections for delay and for changes in delay made at receiver. Requires only one-way transmission, simpler in principle, more energy- and cost-efficient, and enables use of longer transmission paths.

Maleki, Lutfollah↗

All-Optical Frequency Processor for Networking Applications

Herein, we propose an electro-optic approach for transparent optical networking, in which frequency channels are actively transformed into any desired mapping in a wavelength-multiplexed environment. Based on electro-optic phase modulators and Fourier-transform pulse shapers, our all-optical frequency processor (AFP) is examined numerically for the specific operations of frequency channel hopping and broadcasting, and found capable of implementing these transformations with favorable component requirements. Extending our analysis via a mutual-information–based metric for system optimization, we show how to optimize transformation performance under limited resources in a classical context, contrasting the results with those found using metrics motivated by quantum information, such as fidelity and success probability. Given its compatibility with on-chip implementation, as well as elimination of optical-to-electrical conversion in frequency channel switching, the AFP looks to offer valuable potential in silicon photonic network design, as well as the realization of high-dimensional frequency-bin gates.

42 ENGINEERING↗

Stacked Optical Precursors from Amplitude and Phase Modulations

We report the generation of stacked optical precursors from a laser beam whose amplitude or phase is modulated by sequenced on-off step waveforms. Making use of the constructive interference between the precursors produced from different steps, as well as the main field, we generate optical transient pulses having peak powers of eight times the input power with electromagnetically induced transparency in laser-cooled atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cross-phase-modulation-induced temporal reflection and waveguiding of optical pulses

Cross-phase modulation (XPM) is commonly viewed as a nonlinear process that chirps a probe pulse and modifies its spectrum when an intense pump pulse overlaps with it. Here we present an alternative view of XPM in which the pump pulse creates a moving refractive-index boundary that splits the probe pulse into two parts with distinct optical spectra through temporal reflection and refraction inside a dispersive nonlinear medium. The probe even undergoes a temporal version of total internal reflection for sufficiently intense pump pulses, a phenomenon that can be exploited for making temporal waveguides. In this paper we investigate the practical conditions under which XPM can be exploited for temporal reflection and waveguiding. The width and shape of pump pulses as well as the nature of medium dispersion at the pump and probe wavelength (normal versus anomalous) play important roles. A super-Gaussian shape of pump pulses is particularly helpful because of its relatively sharp edges. When the pump wavelength lies in the anomalous-dispersion regime, the pump pulse can form a soliton,whose unique properties can be exploited to advantage. We also discuss a potential application of XPM-induced temporal waveguides for compensating timing jitter.

36 MATERIALS SCIENCE↗

Strain-concentration for fast, compact photonic modulation and non-volatile memory

A critical figure of merit (FoM) for electro-optic (EO) modulators is the transmission change per voltage, d T / d V . Conventional approaches in wave-guided modulators maximize d T / d V via a high EO coefficient or longer light-material interaction lengths but are ultimately limited by material losses and nonlinearities. Optical and RF resonances improve d T / d V at the cost of spectral non-uniformity, especially for high- Q optical cavity resonances. Here, we introduce an EO modulator based on piezo-strain-concentration of a photonic crystal cavity to address both trade-offs: (i) it eliminates the trade-off between d T / d V and waveguide loss—i.e., enhancement of the resonance tuning efficiency d v c / d V for the fixed EO coefficient, waveguide length, and cavity Q —and (ii) at high DC strains it exhibits a non-volatile (NV) cavity tuning Δ v c ,NV for passive memory and programming of multiple devices into resonance despite fabrication variations. The device is fabricated on a scalable silicon nitride-on-aluminum nitride platform. We measure d v c / d V =177±1MHz/V, corresponding to Δ v c =40±0.32GHz for a voltage spanning ±120V with an energy consumption of δ U /Δ v c =0.17nW/GHz. The modulation bandwidth is flat up to ω BW,3dB /2 π =3.2±0.07MHz for broadband DC-AC and 142±17MHz for resonant operation near a 2.8 GHz mechanical resonance. Optical extinction up to 25 dB is obtained via Fano-type interference. Strain-induced beam-buckling modes are programmable under a “read-write” protocol with a continuous, repeatable tuning range of 5±0.25GHz, allowing for storage and retrieval, which we quantify with mutual information of 2.4 bits and a maximum non-volatile excursion of 8 GHz. Using a full piezo-optical finite-element-model (FEM) we identify key design principles for optimizing strain-based modulators and chart a path towards achieving performance comparable to lithium niobate-based modulators and the study of high strain physics on-chip.

Wen, Y. Henry (ORCID:0009000685423628)↗

Methods and algorithms for computer synthesis of holographic elements to obtain a complex impulse response of optical information processing systems based on modern spatial light modulators

The possibilities of designing optical devices for data processing and imaging based on the manipulation of coherent light beams by means of spatial light modulators (SLMs) are investigated. A review of commercially available SLMs is presented and the limitations of their complex modulation characteristics are analysed. The main problem of using present-day SLMs is the lack of the ability to modulate directly all states within a unit circle in the complex plane. In this regard, the characteristics of current methods for the synthesis of holographic elements are described that implement a given complex impulse response of the optical system and are optimal for using SLMs with purely amplitude, purely phase, and hybrid amplitude – phase modulation. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fiber-Optic Link For Transmission Of A Reference Frequency

Design emphasizes maintenance of stable frequency despite changes in temperature. Fiber-optic link delivers highly stable 100-MHz reference-frequency signal to receiver at distance of about 700 m from source of signal. Similar fiber-optic links used to transmit stable reference-frequency signals in other applications in which variations in temperature otherwise potentially cause variations in signal-propagation times and cause undesired variations in frequency. Use of fiber-optic link to transmit radio signal as modulation on optical carrier signal described previously in "Diplex Fiber-Optic Link for Frequency and Time Signals" (NPO-18180), and "Improved Microwave Fiber-Optic Link" (NPO-19007).

Calhoun, Malcolm D.↗

Development of an Optical Slice for an RF and Optical Software Defined Radio

A key component in the Integrated Radio and Optical Communications project at the National Aeronautics and Space Administration's (NASA) Glenn Research Center (GRC) is the radio frequency (RF) and optical software defined radio (SDR). A NASA RF SDR might consist of a general purpose processor to run the Space Telecommunications Radio System (STRS) Architecture for radio command and control, a reconfigurable signal processing device such as a field programmable gate array (FPGA) which houses the waveform, and a digital to analog converter for (DAC) transmitting data. Prior to development, SDR architecture trades on how to combine the RF and optical elements were studied. A modular architecture with physically separate RF and optical hardware slices was chosen and the optical slice of an SDR was designed and developed. The Harris AppSTAR("TM") platform, which consists of an FPGA processing platform with a mezzanine card targeted for RF communications, was used as the base platform in prototyping the optical slice. A serially concatenated pulse position modulation (SCPPM) optical waveform was developed. The waveform follows the standard described in the Consultative Committee for Space Data Systems (CCSDS) Optical Communions Coding and Synchronization Red Book. A custom optical mezzanine printed circuit board card was developed at NASA GRC for optical transmission. The optical mezzanine card replaces the DAC, which is used in the transmission of RF signals. This paper describes RF and optical SDR architecture trades, the Harris AppSTAR("TM") platform, the design of the SCPPM waveform, and the development of the optical mezzanine card.

optical communications↗

Development of an Optical Slice for an RF and Optical Software Defined Radio

A key component in the Integrated Radio and Optical Communications project at the National Aeronautics and Space Administration's (NASA) Glenn Research Center (GRC) is the radio frequency (RF) and optical software defined radio (SDR). A NASA RF SDR might consist of a general purpose processor to run the Space Telecommunications Radio System (STRS) Architecture for radio command and control, a reconfigurable signal processing device such as a field programmable gate array (FPGA) which houses the waveform, and a digital to analog converter (DAC) for transmitting data. Prior to development, SDR architecture trades on how to combine the RF and optical elements were studied. A modular architecture with physically separate RF and optical hardware slices was chosen and the optical slice of an SDR was designed and developed. The Harris AppSTARTM platform, which consists of an FPGA processing platform with a mezzanine card targeted for RF communications, was used as the base platform in prototyping the optical slice. A serially concatenated pulse position modulation (SCPPM) optical waveform was developed. The waveform follows the standard described in the Consultative Committee for Space Data Systems (CCSDS) Optical Communications Coding and Synchronization Red Book. A custom optical mezzanine printed circuit board card was developed at NASA GRC for optical transmission. The optical mezzanine card replaces the DAC, which is used in the transmission of RF signals. This paper describes RF and optical SDR architecture trades, the Harris AppSTAR platform, the design of the SCPPM waveform, and the development of the optical mezzanine card.

Nappier, Jennifer M.↗

Spatial light modulators for full cross-connections in optical networks

A polarization-independent optical switch is disclosed for switching at least one incoming beam from at least one input source to at least one output drain. The switch includes a polarizing beam splitter to split each of the at least one incoming beam into a first input beam and a second input beam, wherein the first input beam and the second input beams are independently polarized; a wave plate optically coupled to the second input beam for converting the polarization of the second input beam to an appropriately polarized second input beam; a beam combiner optically coupled to the first input beam and the modified second input beam, wherein the beam combiner accepts the first input beam and the modified second input beam to produce a combined beam; the combined beam is invariant to the polarization state of the input source's polarization; and a controllable spatial light modulator optically coupled to the combined beam, wherein the combined beam is diffracted by the controllable spatial light modulator to place light at a plurality of output locations.

Juday, Richard D.↗

25 Gbit/s differential phase-shift-keying signal generation using directly modulated quantum-dot semiconductor optical amplifiers

Error-free generation of 25-Gbit/s differential phase-shift keying (DPSK) signals via direct modulation of InAs quantum-dot (QD) based semiconductor optical amplifiers (SOAs) is experimentally demonstrated with an input power level of −5 dBm. The QD SOAs emit in the 1.3-μm wavelength range and provide a small-signal fiber-to-fiber gain of 8 dB. Furthermore, error-free DPSK modulation is achieved for constant optical input power levels from 3 dBm down to only −11 dBm for a bit rate of 20 Gbit/s. Direct phase modulation of QD SOAs via current changes is thus demonstrated to be much faster than direct gain modulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain effects on the modulation of band gap and optical properties of direct band gap silicon

Highlights: • The ideal tensile strength and the cleave mechanism of D135-Si were studied in detail. • The strain effects on band gap were discussed. • The strain and pressure effects on the optical properties were studied. - Abstract: Based on the first-principles calculations, the strain effects on the optical properties of direct band gap silicon crystal D135-Si were systemically investigated. The stress-strain relations and phonon spectra show that the realistic peak tensile strengths in three principle symmetry crystallographic directions [100], [010] and [001] are 4.5, 9.7 and 12.1 GPa, respectively. By imposing the pressure and strain on structure, we studied the direct-indirect band gap transitions and obtained the ranges of the direct band gap, namely 0–4 GPa on pressure, −0.07–0, −0.04–0.08, and −0.01–0.03 on strain along a-, b- and c-direction, respectively. The imaginary part of the dielectric function was calculated to analyze the optical absorption property, which shows the strong adsorption coefficients in the visible range of the sunlight. The effect of pressure on the optical absorption property of structure is the smallest, and the strain effects are gradually enhanced along c-, b- and a-direction, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗