Search NASA⌕ Search

SEARCH · Search NASA

Results for “OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

In Situ Transmission Electron Microscopy of Oxide Shell-Induced Pore Formation in (De)lithiated Silicon Nanowires

Silicon (Si) nanowires with a silicon oxide (SiOx) shell were observed in situ during lithiation and delithiation using transmission electron microscopy (TEM). The oxide shell constrains the volume expansion, which prevents full lithiation of the nanowire and retention of a crystalline Si core. Pores form in the amorphized silicon upon the first delithiation. We propose that this is caused by a high barrier to vacancy migration in the SiOx shell, which prevents vacancies formed during delithiation from transporting through the shell to the nanowire surface. These in situ studies demonstrate the importance of the direct observation of structural changes that occur in a material during cycling upon the addition of a coating.

Adkins, Emily R.↗

Hybrid Molecular Beam Epitaxy for Single-Crystalline Oxide Membranes with Binary Oxide Sacrificial Layers

The advancement in thin-film exfoliation for synthesizing oxide membranes has led to possibilities for creating artificially assembled heterostructures with structurally and chemically incompatible materials. The sacrificial layer method is a promising approach to exfoliate as-grown films from a compatible material system, allowing for their integration with dissimilar materials. Nonetheless, the conventional sacrificial layers often possess an intricate stoichiometry, thereby constraining their practicality and adaptability, particularly when considering techniques such as molecular beam epitaxy (MBE). This is where easy-to-grow binary alkaline-earth-metal oxides with a rock salt crystal structure are useful. These oxides, which include (Mg, Ca, Sr, Ba)O, can be used as a sacrificial layer covering a much broader range of lattice parameters compared to conventional sacrificial layers and are easily dissolvable in deionized water. In this study, we show the epitaxial growth of the single-crystalline perovskite SrTiO 3 (STO) on sacrificial layers consisting of crystalline SrO, BaO, and Ba 1–x Ca x O films, employing a hybrid MBE method. Our results highlight the rapid (≤5 min) dissolution of the sacrificial layer when immersed in deionized water, facilitating the fabrication of millimeter-sized STO membranes. Using high-resolution X-ray diffraction, atomic-force microscopy, scanning transmission electron microscopy, impedance spectroscopy, and scattering-type near-field optical microscopy (SNOM), we demonstrate single-crystalline STO membranes with bulk-like intrinsic dielectric properties. The employment of alkaline earth metal oxides as sacrificial layers is likely to simplify membrane synthesis, particularly with MBE, thus expanding the research and application possibilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiple Pathways for Benzyl Alcohol Oxidation by Ru V =O 3+ and Ru IV =O 2+

Significant rate enhancements are found for benzyl alcohol oxidation by the RuV=O3+ form of the water oxidation catalyst [Ru(Mebimpy)(bpy)(OH2)]2+ [Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl)pyridine; bpy = 2,2'-bipyridine] compared to RuIV=O2+ and for the RuIV=O2+ form with added bases due to a new pathway, concerted hydride proton transfer (HPT).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reorganization Energies for Interfacial Proton-Coupled Electron Transfer to a Water Oxidation Catalyst

The reorganization energy (λ) for interfacial electron transfer (ET) and proton-coupled electron transfer (PCET) from a conductive metal oxide (In 2 O 3 :Sn, ITO) to a surface-bound water oxidation catalyst were extracted from kinetic data measured as a function of the thermodynamic driving force. Visible light excitation resulted in rapid excited-state injection (k inj > 10 8 s -1 ) to the ITO, which photo-initiated the two interfacial reactions of interest. The rate constants for both reactions increased with the driving force, −ΔG°, to a saturating limit, k max , with rate constants consistently larger for ET than for PCET. Marcus-Gerischer analysis of the kinetic data provided the reorganization energy for interfacial PCET (0.90 ± 0.02 eV) and ET (0.40 ± 0.02 eV), respectively. The magnitude of k max for PCET was found to decrease with pH, behavior that was absent for ET. Both the decrease in k max and the larger reorganization energy for an unwanted competing PCET reaction from the ITO to the oxidized catalyst showcases a significant kinetic advantage for driving solar water oxidation at high pH. Computational analysis revealed a larger inner-sphere reorganization energy contribution for PCET than for ET arising from a more significant change in the Ru–O bond length for PCET. Extending Marcus-Gerischer theory to PCET by including the excited electron-proton vibronic states and the proton donor-acceptor motion provided an apparent reorganization energy of 1.01 eV. Furthermore, this study demonstrates that the Marcus-Gerischer theory initially developed for ET can be reliably extended to PCET for quantifying and interpreting reorganization energies observed experimentally.

Catalysts Kinetic parameters↗

Interfacial control of oxygen vacancy doping and electrical conduction in thin film oxide heterostructures

Oxygen vacancies in proximity to surfaces and heterointerfaces in oxide thin film heterostructures have major effects on properties, resulting, for example, in emergent conduction behaviour, large changes in metal-insulator transition temperatures or enhanced catalytic activity. Here we report the discovery of a means of reversibly controlling the oxygen vacancy concentration and distribution in oxide heterostructures consisting of electronically conducting In2O3 films grown on ionically conducting Y2O3-stabilized ZrO2 substrates. Oxygen ion redistribution across the heterointerface is induced using an applied electric field oriented in the plane of the interface, resulting in controlled oxygen vacancy (and hence electron) doping of the film and possible orders-of-magnitude enhancement of the film's electrical conduction. The reversible modified behaviour is dependent on interface properties and is attained without cation doping or changes in the gas environment.

Veal, Boyd W.↗

Subnanometer cobalt oxide clusters as selective low temperature oxidative dehydrogenation catalysts

The discovery of more efficient, economical, and selective catalysts for oxidative dehydrogenation is of immense economic importance. However, the temperatures required for this reaction are typically high, often exceeding 400 degrees C. Herein, we report the discovery of subnanometer sized cobalt oxide clusters for oxidative dehydrogenation of cyclohexane that are active at lower temperatures than reported catalysts, while they can also eliminate the combustion channel. These results found for the two cluster sizes suggest other subnanometer size (CoO) x clusters will also be active at low temperatures. The high activity of the cobalt clusters can be understood on the basis of density functional studies that reveal highly active under-coordinated cobalt atoms in the clusters and show that the oxidized nature of the clusters substantially decreases the binding energy of the cyclohexene species which desorb from the cluster at low temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-material direct ink writing and co-sintering of gadolinium oxide – zirconium oxide components

Methods for fabrication of multi-material or functionally graded ceramic composite architectures are of interest for numerous applications. However, conventional co-sintering of multi-material ceramic parts is a challenge because differences in the sintering behavior of the two materials leads to interfacial strain and, ultimately, component failure. Direct ink writing (DIW) is an extrusion-based additive manufacturing process that excels at multi-material printing because multiple extrusion nozzles can be installed on the same gantry system. Furthermore, the use of DIW as a method to fabricate multi-material ceramic green bodies offers an additional variable for controlling and potentially matching sintering kinetics in the slurry formulation used for two dissimilar feedstocks. In the work documented in this manuscript, we explored two strategies to successfully co-sinter multi-material ceramic oxides: slurry optimization to match sintering kinetics and material gradients to step from one material to another. This manuscript also quantifies the allowable mismatch that avoids part cracking in solid solution forming multi-material systems and discusses best strategies to reduce mismatch during co-sintering. Inks composed of gadolinium oxide (Gd 2 O 3 ) and zirconium oxide (ZrO 2 ), a surrogate for uranium oxide (UO 2 ), were thermally matched, which resulted in a sintering mismatch reduction of over 10%. It was found that ~1% mismatch is tolerable during debind cycles and that ~5% mismatch is manageable during sintering cycles after slurry formulations are optimized to match the sintering behavior. Use of continuous gradients is shown to reduce sintering mismatch, although geometric resolution may be lost due to solid solution formation.

Snarr, Patrick L. [Oak Ridge National Laboratory (↗

Influence of cationic substitutions on the first charge and reversible capacities of lithium-rich layered oxide cathodes

The reversible capacity values of lithium-rich layered oxide cathodes depend on the length (capacity) of the plateau region during the first charge. With an aim to understand the factors that control the length of the plateau region and thereby enhance the reversible capacity, the effects of various cationic substitutions in Li 1.2 Mn 0.6 Ni 0.2 O 2 have been investigated systematically. Specifically, substitutions of (i) M 3+ = Al 3+ , Cr 3+ , Fe 3+ , Co 3+ , and Ga 3+ for equal amounts of Mn 4+ and Ni 2+ in Li 1.2 Mn 0.6-0.5x Ni 0.2-0.5x M x O 2 with x = 0.06, 0.13, and 0.2, (ii) Ti 4+ for Mn 4+ in Li 1.2 Mn 0.6-x Ti x Ni 0.2 O 2 with x = 0.025, 0.05, and 0.1, and (iii) Mg 2+ for Ni 2+ in Li 1.2 Mn 0.6 Ni 0.2-x Mg x O 2 with x = 0.025, 0.05, and 0.1 have been investigated. The cationic substitutions affect the first charge capacity values both in the sloping region corresponding to the oxidation of the transition-metal ions to the 4+ state and in the plateau region corresponding to the oxidation of O 2- ions to O 2 and/or transition-metal ions beyond 4+, which control the reversible capacity values in subsequent cycles. While the changes in the sloping-region capacity could be readily understood by considering the redox activities of the transition-metal ions, the plateau-region capacity is found to depend sensitively on the metal–oxygen covalence, which is dictated by the relative positions of the metal:3d band with respect to the top of the O 2- :2p band, and electron delocalization. For instance, an overlap of the Co 3+/4+ :t 2g band with the top of the O 2- :2p band along with a partially filled t 2g band across the shared octahedral edges makes the oxygen loss from the lattice and/or oxidation beyond 4+ much more facile.

solar (photovoltaic), phonons, energy storage (inc↗

Tailoring the composition of ultrathin, ternary alloy PtRuFe nanowires for the methanol oxidation reaction and formic acid oxidation reaction

In the search for alternatives to conventional Pt electrocatalysts, we have synthesized ultrathin, ternary PtRuFe nanowires (NW), possessing different chemical compositions in order to probe their CO tolerance as well as electrochemical activity as a function of composition for both (i) the methanol oxidation reaction (MOR) and (ii) the formic acid oxidation reaction (FAOR). As-prepared ‘multifunctional’ ternary NW catalysts exhibited both higher MOR and FAOR activity as compared with binary Pt₇Ru₃ NW, monometallic Pt NW, and commercial catalyst control samples. In terms of synthetic novelty, we utilized a sustainably mild, ambient wet-synthesis method never previously applied to the fabrication of crystalline, pure ternary systems in order to fabricate ultrathin, homogeneous alloy PtRuFe NWs with a range of controlled compositions. Thus, these NWs were subsequently characterized using a suite of techniques including XRD, TEM, SAED, and EDAX in order to verify not only the incorporation of Ru and Fe into the Pt lattice but also their chemical homogeneity, morphology, as well as physical structure and integrity. Lastly, these NWs were electrochemically tested in order to deduce the appropriateness of conventional explanations such as (i) the bi-functional mechanism as well as (ii) the ligand effect to account for our MOR and FAOR reaction data. Specifically, methanol oxidation appears to be predominantly influenced by the Ru content, whereas formic acid oxidation is primarily impacted by the corresponding Fe content within the ternary metal alloy catalyst itself.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Iridium-based complexes for water oxidation

Organometallic Ir precatalysts have been found to yield homogeneous Ir-based water-oxidation catalysts (WOCs) with very high activity. The Cp*Ir catalyst series can operate under a variety of regimes: it can either act as a homogeneous or a heterogeneous catalyst; it can be driven by chemical, photochemical, or electrochemical methods; and the molecular catalyst can either act in solution or supported as a molecular unit on a variety of solid oxides. In addition to optimizing the various reaction conditions, work has continued to elucidate the catalyst activation mechanism and identify water-oxidation intermediates. Furthermore, this Perspective will describe the development of the Cp*Ir series, their many forms as WOCs, and their ongoing characterization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into the structure–property–activity relationship in molybdenum-doped octahedral molecular sieve manganese oxides for catalytic oxidation

Hexavalent molybdenum ions substituted into the mixed-valent framework of octahedral molecular sieve manganese oxides (1–10 mol% Mo–K-OMS-2) were systematically prepared via a single-step refluxing method. Here, the structure, composition, morphology, thermal stability, and textural and redox properties of the Mo–K-OMS-2 materials were characterized by various experimental techniques. Density functional theory (DFT) calculations were performed to study the electronic properties of K-OMS-2 materials, including the influence of molybdenum on such properties. The catalytic activity of K-OMS-2 towards CO oxidation dramatically increased with Mo dopant concentration, until an optimum incorporation of 5 mol% was reached, giving full CO conversion at 120 °C (1 vol% CO, 1 vol% O2). More importantly, the activity of the 5% Mo–K-OMS-2 catalyst was (reversibly) inhibited by water vapour (3%) in the feed only at low temperatures and exhibited better tolerance and stability during long-run experiments (28 h) as compared to undoped K-OMS-2. The superior performance of Mo–K-OMS-2 catalyst for CO oxidation can be attributed to the following factors: (1) morphological evolution from nanofibers to nanospheres, as well as the slightly distorted structure, generated a sharp increase in the specific surface area up to 258 m2 g–1, hence, increased the number of surface active sites; (2) improved mobility of reactive oxygen species at the surface and enhanced redox properties; and (3) tailored electronic properties promoted more active sites for oxidation reactions, which is supported by DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous cobalt/manganese oxide: a highly selective bifunctional catalyst for amine–imine transformations

Here, we discuss a heterogeneous catalytic protocol using cobalt doped mesoporous manganese oxide for amine–alcohol cross-coupling to selectively produce symmetric or asymmetric imines. Thorough investigations on the surface chemistry and physical properties of the material revealed its outstanding oxidation–reduction properties and reaction mechanism which was supported by quantum mechanical calculations done by using density functional theory (DFT).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and reactivity of pentapyridyl metal complexes for ammonia oxidation

Oxidation of NH3 to N2 by pentapyridyl metal complexes via hydrogen atom abstraction was investigated computationally. Quantum chemical analysis reveals insights on orbital symmetry requirements for efficient NH3 oxidation. The most promising complex, [(PY5)Mo(NH3)]2+, was studied experimentally. It shows conversion of NH3 to N2 upon treatment with 2,4,6-tri-tertbutylphenoxyl radical.

Johnson, Samantha JI↗