Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA FOCUS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Mass accretion and nested array dynamics from Ni-Clad Ti-Al wire array Z pinches.

Analysis of 50 mm diameter wire arrays at the Z Accelerator has shown experimentally the accretion of mass in a stagnating z pinch and provided insight into details of the radiating plasma species and plasma conditions. This analysis focused on nested wire arrays with a 2:1 (outeninner) mass, radius, and wire number ratio where Al wires were fielded on the outer array and Ni-clad Ti wires were fielded on the inner array.In this presentation, we will present analysis of data from other mixed Al/Ni-clad Ti configurations to further evaluate nested wire array dynamics and mass accretion. These additional configurations include the opposite configuration to that described above (Ni-clad Ti wires on the outer array, with Al wires on the inner array) as well as higher wire number Al configurations fielded to vary the interaction of the two arrays. These same variations were also assessed for a smaller diameter nested array configuration (40 mm). Variations in the emitted radiation and plasma conditions will be presented, along with a discussion of what the results indicate about the nested array dynamics. Additional evidence for mass accretion will also be presented.

43 PARTICLE ACCELERATORS↗

A SIMPLE METHOD FOR MODELING COLLISION PROCESSES IN PLASMAS WITH A KAPPA ENERGY DISTRIBUTION

We demonstrate that a nonthermal distribution of particles described by a kappa distribution can be accurately approximated by a weighted sum of Maxwell–Boltzmann distributions. We apply this method to modeling collision processes in kappa-distribution plasmas, with a particular focus on atomic processes important for solar physics. The relevant collision process rate coefficients are generated by summing appropriately weighted Maxwellian rate coefficients. This method reproduces the rate coefficients for a kappa distribution to an estimated accuracy of better than 3%. This is equal to or better than the accuracy of rate coefficients generated using “reverse-engineering” methods, which attempt to extract the needed cross sections from the published Maxwellian rate coefficient data and then reconvolve the extracted cross sections with the desired kappa distribution. Our approach of summing Maxwellian rate coefficients is easy to implement using existing spectral analysis software. Moreover, the weights in the sum of the Maxwell–Boltzmann distribution rate coefficients can be found for any value of the parameter κ, thereby enabling one to model plasmas with a time-varying κ. Tabulated Maxwellian fitting parameters are given for specific values of κ from 1.7 to 100. We also provide polynomial fits to these parameters over this entire range. Several applications of our technique are presented, including the plasma equilibrium charge state distribution (CSD), predicting line ratios, modeling the influence of electron impact multiple ionization on the equilibrium CSD of kappa-distribution plasmas, and calculating the time-varying CSD of plasmas during a solar flare.

79 ASTRONOMY AND ASTROPHYSICS↗

Early- and late-time dynamics of laser-produced plasmas by combining emission and absorption spectroscopy

Optical emission spectroscopy and laser absorption spectroscopy are two highly complementary techniques for diagnosing plasmas, specifically in the determination of important parameters such as temperature and density. In this work, we characterized a laser-produced plasma by combining emission and tunable absorption spectroscopy. Plasmas are produced by focusing pulses from a frequency quadrupled Nd:YAG laser onto a glass target containing a minor concentration of aluminum in an ambient atmosphere of ~100 Torr N 2 . Here, emission spectroscopy is used to investigate the line behavior of Al and Ca, electron density, and excitation temperature at times = 5 μs, while absorption spectroscopy is used to investigate the line behavior of Al and Ca, species density, and kinetic temperature at times = 5-100 μs. A comparison is made between the excitation temperature measured from emission using the Boltzmann plot method and the kinetic temperature measured from absorption; the implications of this comparison on local thermodynamic equilibrium and line-of-sight averaging are discussed. By combining the two methods of optical emission and laser absorption spectroscopy, a comprehensive characterization of the plasma over the entire lifetime of its evolution is possible, leading to a greater understanding of the plasma behavior including particle condensation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental and theoretical comparison of ion properties from nanosecond laser-produced plasmas of metal targets

The ion emission properties of laser-produced plasmas as a function of laser intensities between 4–50 GW cm –2 and varying angles with respect to the target normal were investigated. The plasmas were produced by focusing 1064 nm, 6 ns pulses from an Nd:YAG laser on various metal targets. The targets used for this study include Ti, Mo, and Gd (Z = 22, 42, 64). It is noted that all ion profiles are composed of multiple peaks—a prompt emission peak trailed by three ion peaks (ultrafast, fast, and thermal). Experimentally, it is shown that each of these ion peaks follows a unique trend as a function of laser intensity, angle, and distance away from the target. Theoretically, it is shown that simple analytical models can be used to explain the properties of the ions. The variations in the ion velocity and density as a function of laser intensity are found to be in good agreement with theoretical models of sheath acceleration, isothermal self-similar expansion, and ablative plasma flow for various ion peaks.

42 ENGINEERING↗

An evaluation of equilibrium conditions and temperature-dependent speciation in a laser-produced air plasma

A laser-induced air breakdown plasma is a dynamical system and its fundamental parameters change significantly during its lifetime. The temporal evolution of the spectral features from an air plasma shows emission from bremsstrahlung followed by discrete electronic transitions from ions, atoms, and rotational and vibrations bands from molecules. The molecular band emission from air plasma typically appears at times ≳5 μs and persists for 100s of μs. Here, an evaluation is made on the temperature evolution and speciation in a laser-produced air plasma. The air plasmas are generated by focusing 1064 nm, 6 ns pulses from an Nd:YAG laser. High-resolution emission spectra of various molecules such as N 2 , N 2 + , CN, OH, NH, NO are acquired for fits to spectral models. Fitting of atomic and molecular emission features permits tracking of the air spark temperature evolution from 1 to 200 µs. Though the excitation and molecular temperatures show good overlap at times ≲10 μs, the molecular temperatures obtained from different species show a discontinuity at times ~ 30 μs and this is related to shock collapse and subsequent changes in hydrodynamics and chemistry of the plume. The fitting of multiple species in broadband spectra has permitted calculation of the relative concentrations of various molecules as a function of temperature that provides insight into the air spark speciation. Finally, the measured mole fractions from laser-induced air plasma are within a factor of 2 - 6 of the values estimated by speciation model under the assumption of thermal and chemical equilibrium across the temperature ranges studied and probable reasons for the observed deviation are described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparing the kinetics of ionized and neutral atoms from single and multi-element laser-produced plasmas

In this work, kinetics of ion and neutral atom emission features were compared for nanosecond laser-produced plasmas generated from several metal targets (i.e., Al, Ti, Zr, Nb, Ta) and an alloy containing all of these as principal alloying elements. Plasmas were produced by focusing 6 ns, 1064 nm pulses from an Nd:YAG laser on the targets of interest in a vacuum. A Faraday cup was used for collecting ion temporal features while spatially and temporally resolved emission spectroscopy was used for measuring the optical time of flight of various neutral atomic transitions. Our results highlight that most probable ion and atom velocities decay with increasing atomic mass. Trends for ions from the alloy target represent a weighted average where all ions contribute. For both ions and atoms, velocities decrease with increasing heat of vaporization and melting temperature, consistent with the thermal mechanisms that contribute to nanosecond laser ablation. Kinetic energies for neutral atoms from pure metal targets have some variability with atomic mass, whereas kinetic energies for atoms from the alloy target are more similar. These more similar kinetic energies observed for neutral atoms in the multi-element plasma may be attributed to collisions between species from all elements in the Knudsen layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Excitational energy transfer enhancing ionization and spatial-temporal evolution of air breakdown with UV laser radiation

This paper examines the role multiphoton excitation of oxygen has on the ionization of nitrogen in laser air breakdown. Plasma is created by focusing a 193 nm ArF excimer laser using an 18 cm focal length lens, producing a cylindrical 540 {mu}m wide spot of intensity 6.5 GW/cm{sup 2}, well below the classical limit for collisional cascade (CC) breakdown. By spectroscopically monitoring the B {sup 2{Sigma}}{sub u}{sup +} to X {sup 2{Sigma}}{sub g}{sup +} transition at 391.4 nm of N{sub 2}{sup +} in N{sub 2} and O{sub 2} mixes, collisions between N{sub 2} and metastable O{sub 2} states that have undergone 1+1 absorption processes are shown to lower the degree of nonlinearity (i.e., the number of photons involved in the rate limiting multiphoton absorption process) in the ionization of N{sub 2}. This process is also found to dominate the 2+1 resonant enhanced multiphoton ionization of N{sub 2} in air and be the primary source for ionization of N{sub 2} to the B {sup 2{Sigma}}{sub u}{sup +} state. Plasma formation and evolution is also examined using a 1.3 cm focal length objective lens creating a 40 {mu}m wide spot of intensity 1.25 TW/cm{sup 2}, above the classical limit for breakdown. This plasma is imaged with a fast (1.2 ns) gating intensified charge coupled device camera. Early plasma formation is seen to be inhomogeneous in nature, and significant ion density is found to exist up to 20 {mu}s after the laser pulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Terahertz generation by relativistic ponderomotive focusing of two co-axial Gaussian laser beams propagating in ripple density plasma

Terahertz (THz) generation by beating of two co-axial Gaussian laser beams, propagating in ripple density plasma, has been studied when both ponderomotive and relativistic nonlinearities are operative. When the two lasers co-propagate in rippled density plasma, electrons acquire a nonlinear velocity at beat frequency in the direction transverse to the direction of propagation. This nonlinear oscillatory velocity couples with the density ripple to generate a nonlinear current, which in turn generates THz radiation at the difference frequency. The necessary phase matching condition is provided by the density ripple. Relativistic ponderomotive focusing of the two lasers and its effects on yield of the generated THz amplitude have been discussed. Numerical results show that conversion efficiency of the order of 10{sup −3} can be achieved in the terahertz radiation generation with relativistic ponderomotive focusing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-driven x-ray and proton micro-source and application to simultaneous single-shot bi-modal radiographic imaging

Radiographic imaging with x-rays and protons is an omnipresent tool in basic research and applications in industry, material science and medical diagnostics. The information contained in both modalities can often be valuable in principle, but difficult to access simultaneously. Laser-driven solid-density plasma-sources deliver both kinds of radiation, but mostly single modalities have been explored for applications. Their potential for bi-modal radiographic imaging has never been fully realized, due to problems in generating appropriate sources and separating image modalities. Here, we report on the generation of proton and x-ray micro-sources in laser-plasma interactions of the focused Texas Petawatt laser with solid-density, micrometer-sized tungsten needles. We apply them for bi-modal radiographic imaging of biological and technological objects in a single laser shot. Thereby, advantages of laser-driven sources could be enriched beyond their small footprint by embracing their additional unique properties, including the spectral bandwidth, small source size and multi-mode emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Well-posedness and generalized plane waves simulations of a 2D mode conversion model

Certain types of electro-magnetic waves propagating in a plasma can undergo a mode conversion process. In magnetic confinement fusion, this phenomenon is very useful to heat the plasma, since it permits to transfer the heat at or near the plasma center. This work focuses on a mathematical model of wave propagation around the mode conversion region, from both theoretical and numerical points of view. It aims at developing, for a well-posed equation, specific basis functions to study a wave mode conversion process. These basis functions, called generalized plane waves, are intrinsically based on variable coefficients. As such, they are particularly adapted to the mode conversion problem. The design of generalized plane waves for the proposed model is described in detail. Their implementation within a discontinuous Galerkin method then provides numerical simulations of the process. These first 2D simulations for this model agree with qualitative aspects studied in previous works.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excitation wavelength dependence of water-window line emissions from boron-nitride laser-produced plasmas

We investigated the effects of laser excitation wavelength on water-window emission lines of laser-produced boron-nitride plasmas. Plasmas are produced by focusing 1064 nm and harmonically generated 532 and 266 nm radiation from a Nd:YAG laser on BN target in vacuum. Soft x-ray emission lines in the water-window region are recorded using a grazing-incidence spectrograph. Filtered photodiodes are used to obtain complementary data for water-window emission intensity and angular dependence. Spectral emission intensity changes in nitrogen Ly-{alpha} and He-{alpha} are used to show how laser wavelength affects emission. Our results show that the relative intensity of spectral lines is laser wavelength dependent, with the ratio of Ly-{alpha} to He-{alpha} emission intensity decreasing as laser wavelength is shortened. Filtered photodiode measurements of angular dependence showed that 266 and 532 nm laser wavelengths produce uniform emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cavity pressure acceleration: An efficient laser-based method of production of high-velocity macroparticles

We propose an efficient method of accelerating macroparticles to high velocities, which employs pressure of the plasma produced by a focused pulsed high-power laser beam inside a cavity-type target. That is why we have called it the cavity pressure acceleration (CPA) scheme. The method was tested during our experiments at the Prague Asterix Laser System, the results of which are reported here. They show that CPA makes it possible to accelerate both light and heavy macroparticles in arbitrary direction, with the acceleration efficiency far exceeding that achieved upto now by using the classic ablative acceleration scheme. High velocities of the macroparticles (foil fragments) produced and possibility of accelerating even rather heavy macroparticles are promising from the point of view of impact fusion studies, of the impact fast ignition, in particular.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fully kinetic simulation of ion acoustic and dust-ion acoustic waves

A series of numerical simulations is presented, based on a recurrence-free Vlasov kinetic model using kinetic phase point trajectories. All plasma components are modeled kinetically via a Vlasov evolution equation, then coupled through Poisson's equation. The dynamics of ion acoustic waves in an electron-ion and in a dusty (electron-ion-dust) plasma configuration are investigated, focusing on wave decay due to Landau damping and, in particular, on the parametric dependence of the damping rate on the dust concentration and on the electron-to-ion temperature ratio. In the absence of dust, the occurrence of damping was observed, as expected, and its dependence to the relative magnitude of the electron vs ion temperature(s) was investigated. When present, the dust component influences the charge balance, enabling dust-ion acoustic waves to survive Landau damping even in the extreme regime where T{sub e} {approx_equal} T{sub i}. The Landau damping rate is shown to be minimized for a strong dust concentration or/and for a high value of the electron-to-ion temperature ratio. Our results confirm earlier theoretical considerations and contribute to the interpretation of experimental observations of dust-ion acoustic wave characteristics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Adaptive complex nanocomposite alloys for burning plasma-material interface tunability (Final Report)

The focus of this program is discovery and development of novel self-healing and adaptive materials for the PMI (plasma-material interface) envisioned for future plasma-burning extreme environments in thermonuclear fusion reactors that can provide enhanced radiation-tolerance or resistance. This program was conceived and stems from the PI’s DOE Early Career Award work on harnessing nanotechnology and mesoscale materials design in refractory metals to address gaps in PMI research. These gaps pertain to the lack of understanding of multi-scale interactions at the plasma-material interface and the development of novel material interfaces that can be designed to adapt to extreme fusion reactor conditions. The final report is separated into two primary sections: The first section consists of the program’s first two years (FY16-FY17) performance period. The second section consists of FY18 to FY19 period, where the FY19 period was a supplemental addition to support the completion of a PhD thesis and continuation of another. This work consists of an excellent team consisting of a co-PI, one postdoctoral researcher, two graduate students, two undergraduate students and collaborators both domestic and abroad.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fourier-spectral element approximation of the ion–electron Braginskii system with application to tokamak edge plasma in divertor configuration

Due to the extreme conditions required to produce energy by nuclear fusion in tokamaks, simulating the plasma behavior is an important but challenging task. We focus on the edge part of the plasma, where fluid approaches are probably the best suited, and our approach relies on the Braginskii ion–electron model. Assuming that the electric field is electrostatic, this yields a set of 10 strongly coupled and non-linear conservation equations that exhibit multiscale and anisotropy features. The computational domain is a torus of complex geometrical section, that corresponds to the divertor configuration, i.e. with an “X-point” in the magnetic surfaces. To capture the complex physics that is involved, high order methods are used: The time-discretization is based on a Strang splitting, that combines implicit and explicit high order Runge–Kutta schemes, and the space discretization makes use of the spectral element method in the poloidal plane together with Fourier expansions in the toroidal direction. The paper thoroughly describes the algorithms that have been developed, provides some numerical validations of the key algorithms and exhibits the results of preliminary numerical experiments. In particular, we point out that the highest frequency of the system is intermediate between the ion and electron cyclotron frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Area-preserving maps models of gyroaveraged E×B chaotic transport

Discrete maps have been extensively used to model 2-dimensional chaotic transport in plasmas and fluids. Here we focus on area-preserving maps describing finite Larmor radius (FLR) effects on E × B chaotic transport in magnetized plasmas with zonal flows perturbed by electrostatic drift waves. FLR effects are included by gyro-averaging the Hamiltonians of the maps which, depending on the zonal flow profile, can have monotonic or non-monotonic frequencies. In the limit of zero Larmor radius, the monotonic frequency map reduces to the standard Chirikov-Taylor map, and in the case of non-monotonic frequency, the map reduces to the standard nontwist map. We show that in both cases FLR leads to chaos suppression, changes in the stability of fixed points, and robustness of transport barriers. FLR effects are also responsible for changes in the phase space topology and zonal flow bifurcations. Dynamical systems methods based on the counting of recurrences times are used to quantify the dependence on the Larmor radius of the threshold for the destruction of transport barriers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relativistic self-focusing of ultra-high intensity X-ray laser beams in warm quantum plasma with upward density profile

The results of a numerical study of high-intensity X-ray laser beam interaction with warm quantum plasma (WQP) are presented. By means of an upward ramp density profile combined with quantum factors specially the Fermi velocity, we have demonstrated significant relativistic self-focusing (RSF) of a Gaussian electromagnetic beam in the WQP where the Fermi temperature term in the dielectric function is important. For this purpose, we have considered the quantum hydrodynamics model that modifies refractive index of inhomogeneous WQPs with the inclusion of quantum correction through the quantum statistical and diffraction effects in the relativistic regime. Also, to better illustration of the physical difference between warm and cold quantum plasmas and their effect on the RSF, we have derived the envelope equation governing the spot size of X-ray laser beam in Q-plasmas. In addition to the upward ramp density profile, we have found that the quantum effects would be caused much higher oscillation and better focusing of X-ray laser beam in the WQP compared to that of cold quantum case. Our computational results reveal the importance of the use of electrons density profile and Fermi speed in enhancing self-focusing of laser beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical Analysis of Fatigue Behavior of ITER-Like Monoblock Divertor Interlayer Under Coupled Heat Loads

High-confinement mode is a very prominent operation style for future fusion device due to its unique advantages. However, the conjuncted edge localized modes (ELMs) are very difficult to control so that divertor plates are very prone to suffer both stationary high heat flux (HHF) loads of long-pulse operating mode and transient shock loads of ELMs. Most previous researches focus on degradation of plasma facing material (PFM), however, as a layer joining PFM and cooling tube, the soft copper interlayer suffers concentrated thermal stress loads due to mismatched thermal expansion of PFM and cooling tube. Its thermal fatigue behavior under such coupled loads is also of great significance to structural safety of divertor component. With such a motivation, the reduction effects on fatigue life time of a typical interlayer of monoblock divertor under series of coupled HHF and ELMs shock loading conditions are investigated. It is found that: (1) The transient shock feature of ELMs loading is propagated into interlayer with less sharp pattern. The increase of damage induced by coupled ELMs loading is limited in single cycle, while the accumulated damage of multiple consecutive coupled loading cycles is increased nonlinearly. (2) Under the coupled HHF and ELMs loading, the fatigue life time of interlayer is generally decreasing. The magnitude of decrease is increasing nonlinearly with the magnitude of ELMs peak and averaged heat flux. (3) For three characteristic parameters of ELMs shock loading such as frequency, duration and peak heat flux, the peak heat flux and frequency are two parameters more sensitive to determine coupled reduction effects on fatigue lifetime of the interlayer, while for high frequency case, time averaged heat flux takes the lead.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗