Search NASA⌕ Search

SEARCH · Search NASA

Results for “Point defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Suppression of the antiferroelectric phase during polarization cycling of an induced ferroelectric phase

The ceramic Pb{sub 0.99}Nb{sub 0.02}[(Zr{sub 0.57}Sn{sub 0.43}){sub 0.92}Ti{sub 0.08}]{sub 0.98}O{sub 3} can exist in either an antiferroelectric or a ferroelectric phase at room temperature, depending on the thermal and electrical history. The antiferroelectric phase can be partially recovered from the induced ferroelectric phase when the applied field reverses polarity. Therefore, polarization cycling of the ferroelectric phase in the ceramic under bipolar fields at room temperature is accompanied with repeated phase transitions. In this letter, the stability of the recovered antiferroelectric phase upon electrical cycling of the ceramic is investigated. Ex-situ X-ray diffraction reveals that bipolar cycling suppresses the antiferroelectric phase; this is indirectly supported by piezoelectric coefficient d{sub 33} measurements. It is speculated that the accumulated charged point defects during polarization cycling stabilize the polar ferroelectric phase. The findings presented are important to the fundamental studies of electric fatigue and field-induced phase transitions in ferroelectrics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inhomogeneous broadening and splitting of lines in spectra of YAG : Tm

The shape and fine structure of lines due to Tm{sup 3+} f −f electronic transitions in multifunctional Y{sub 3}Al{sub 5}O{sub 12} garnet crystals have been studied by high-resolution spectroscopy. The observed inhomogeneously broadened lines have a Lorentzian shape, suggesting that point defects make a predominant contribution to the inhomogeneous broadening. Moreover, Y{sub Al} antisite defects, which are formed during high-temperature melt growth, produce spectral satellites near the main lines. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

FInal Report: First Principles Modeling of Mechanisms Underlying Scintillator Non-Proportionality

This final report presents work carried out on the project “First Principles Modeling of Mechanisms Underlying Scintillator Non-Proportionality” at Lawrence Livermore National Laboratory during 2013-2015. The scope of the work was to further the physical understanding of the microscopic mechanisms behind scintillator nonproportionality that effectively limits the achievable detector resolution. Thereby, crucial quantitative data for these processes as input to large-scale simulation codes has been provided. In particular, this project was divided into three tasks: (i) Quantum mechanical rates of non-radiative quenching, (ii) The thermodynamics of point defects and dopants, and (iii) Formation and migration of self-trapped polarons. The progress and results of each of these subtasks are detailed.

36 MATERIALS SCIENCE↗

Molecular dynamics simulation of radiation damage cascades in diamond

Radiation damage cascades in diamond are studied by molecular dynamics simulations employing the Environment Dependent Interaction Potential for carbon. Primary knock-on atom (PKA) energies up to 2.5 keV are considered and a uniformly distributed set of 25 initial PKA directions provide robust statistics. The simulations reveal the atomistic origins of radiation-resistance in diamond and provide a comprehensive computational analysis of cascade evolution and dynamics. As for the case of graphite, the atomic trajectories are found to have a fractal-like character, thermal spikes are absent and only isolated point defects are generated. Quantitative analysis shows that the instantaneous maximum kinetic energy decays exponentially with time, and that the timescale of the ballistic phase has a power-law dependence on PKA energy. Defect recombination is efficient and independent of PKA energy, with only 50% of displacements resulting in defects, superior to graphite where the same quantity is nearly 75%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of Nanostructured Materials with Improved Radiation Tolerance for Advanced Nuclear Systems

This project will explore the fundamental mechanisms through which interfaces in nanolayered structures and grain boundaries of bulk nanomaterials are able to attract and rapidly eliminate point defects and unwanted foreign species. Candidate materials that will be studied include both nanostructured multilayer composites synthesized by magnetron sputtering and structural bulk nanomaterials produced by severed plastic deformation, equal channel angular extrusion.

36 MATERIALS SCIENCE↗

Reactive sintering of tungsten-doped high strength ZrB{sub 2}–SiC porous ceramics using metastable precursors

Graphical abstract: - Highlights: • Tungsten-doped porous ZrB{sub 2}–SiC specimens were fabricated by reactive sintering. • Both sintering and mechanical properties were improved by doping with tungsten. • Optimum concentration to obtain high mechanical properties was W/Zr (mol) = 0.05. • Sintering might be promoted by self-accelerated diffusion. • Mechanical properties might be improved by solid solution strengthening. - Abstract: Tungsten-doped porous ZrB{sub 2}-20 vol.% SiC specimens with a high strength skeleton were fabricated by reactive sintering using metastable reactants, i.e., as-synthesized amorphous hydrous ZrO{sub 2}–WO{sub 3}/ZrO{sub 2}, amorphous boron, nanocarbon, and β-SiC. Doping with tungsten clearly promoted sintering and improved mechanical properties; the optimum tungsten concentration to obtain high mechanical properties was investigated. A single-phase solid solution (Zr,W)B{sub 2} was formed in the specimens with tungsten. We suggest that sintering was promoted by self-accelerated diffusion owing to the formation of point defects caused by doping with tungsten. The improvement of mechanical properties could be attributed to solid solution strengthening.

36 MATERIALS SCIENCE↗

Investigation of emitting centers in SiO{sub 2} codoped with silicon nanoclusters and Er{sup 3+} ions by cathodoluminescence technique

This study reports on the investigation and characterization of the different emitting centers within SiO{sub 2} codoped by Er{sup 3+} ions and silicon-excess. Erbium doped silicon-rich silicon oxide (SRSO:Er) thin films, fabricated by magnetron cosputtering at 500 deg. C, were analyzed by means of cathodoluminescence. The CL spectra of SRSO, Er-doped SiO{sub 2} and SRSO:Er were recorded and compared for various annealing temperatures. It was found that some specific optically-active point-defects called silicon-oxygen-deficient centers (SiODCs) are present in all kinds of samples. In the layers containing some excess Si, the phase separation between Si nanoclusters (Si-ncs) and SiO{sub 2} is observed when the annealing temperature reaches and exceeds 900 deg. C. The formation of Si-nc increases with annealing at the expense of SiODCs that was assumed to act as seeds for the growth of Si-nc. For SRSO:Er samples, the contribution of SiODCs overlaps that due to Er{sup 3+} transitions in the visible range. The emissions from SiODCs are drastically reduced when an SRSO sample is doped with Er ions, whereas the Er emissions in the visible range start to be distinctly observed. We propose a scenario of energy transfer from SiODCs toward the Er ions, especially as the emissions from the Si-based entities (SiODCs, Si-nc) and from some transitions of Er ions are located in a same visible broad range.

36 MATERIALS SCIENCE↗

Tunable Oxygen Diffusion and Electronic Conduction in SrTiO 3 by Dislocation-Induced Space Charge Fields

Plastic strain engineering has been applied to induce controllable changes in electronic and oxygen ion conductivity in oxides by orders of magnitude, without changing their nominal composition. By using SrTiO 3 as a model system of technological importance, and by combining electrical and chemical tracer diffusion experiments with computational modeling, it is revealed that dislocations alter the equilibrium concentration and distribution of electronic and ionic defects. The easier reducibility of the dislocation cores increases the n-type conductivity by 50 times at oxygen pressures below 10 -5 atm at 650 °C. At higher oxygen pressures the p-type conductivity decreases by 50 times and the oxygen diffusion coefficient reduces by three orders of magnitude. The strongly altered electrical and oxygen diffusion properties in SrTiO 3 arise because of the existence of overlapping electrostatic fields around the positively charged dislocation cores. The findings and the approach are broadly important and have the potential for significantly impacting the functionalities of electrochemical and/or electronic applications such as thin film oxide electronics, memristive systems, sensors, micro-solid oxide fuel cells, and catalysts, whose functionalities rely on the concentration and distribution of charged point defects.

36 MATERIALS SCIENCE↗

Dynamic mechanical properties of a Ti-based metallic glass matrix composite

Dynamic mechanical behavior of a Ti{sub 50}Zr{sub 20}Nb{sub 12}Cu{sub 5}Be{sub 13} bulk metallic glass composite was investigated using mechanical spectroscopy in both temperature and frequency domains. Storage modulus G′ and loss modulus G″ are determined by temperature, and three distinct regions corresponding to different states in the bulk metallic glass composite are characterized. Physical parameters, such as atomic mobility and correlation factor χ, are introduced to analyze dynamic mechanical behavior of the bulk metallic glass composite in the framework of quasi-point defects (QPD) model. The experimental results are in good agreement with the prediction of QPD model.

36 MATERIALS SCIENCE↗

Impact of fluence-rate related effects on the sputtering of silicon at elevated target temperatures

In this work we show how ion-beam-induced epitaxial recrystallization plays a role in focused ion-beam (FIB) sputtering of silicon at elevated temperatures. The sputtering process is the key to all high-precision machining of microstructures and nanostructures by FIBs. A fluence-rate effect observed for the sputtering of silicon at elevated temperatures arises from competition between stabilizing interactions between populations of defects produced by consecutive ion impingement (damage buildup) and dynamic self-annealing. By high-resolution transmission electron microscopy analysis we show that the damage, produced by exposure of silicon to a 50 kV focused gallium (Ga) ion beam at elevated target temperatures, departs quite substantially from the expected damage based on the distribution of energy within the substrate due to nuclear stopping. An amorphous layer observed at room temperature is completely absent at higher temperatures. In contrast to FIB exposure at room temperature the implanted layers contain only point defects complexes and dislocations, thus suggesting that defect annealing takes place but it is incomplete. Correlating FIB sputtering experiments and high-resolution transmission electron microscopy, we discuss the lower sputtering yield at elevated target temperatures as the result of a higher surface binding energy of crystalline Si in comparison to amorphous silicon.

36 MATERIALS SCIENCE↗

First-principles calculations of the stability and incorporation of helium, xenon and krypton in uranium

While metallic fuels have a long history of reactor use, their fundamental physical and thermodynamic properties are not well understood. Many metallic nuclear fuels are body-centered cubic alloys of uranium that swell under fission conditions, creating fission product gases such as helium, xenon and krypton. In this paper, helium, xenon, and krypton point defects are investigated in the a and ? phases of metallic uranium using first principles calculations. A density functional theory (DFT) framework is utilized with projector augmented-wave (PAW) pseudopotentials. Formation and incorporation energies of He, Xe, and Kr are calculated at various defect positions for the prediction of fission gas behavior in uranium. In most cases, defect energies follow a size effect, with helium incorporation and formation energies being the smallest. The most likely position for the larger Xe and Kr atoms in uranium is the substitutional site. Helium atoms are likely to be found in a wide variety of defect positions due to the comparable formation energies of all defect configurations analyzed. This is the first detailed study of the stability and incorporation of fission gases in uranium.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Growth mechanism of ZnO low-temperature homoepitaxy

The authors report on the growth mechanism of ZnO homoepitaxy at the low-temperature range of 500 deg. C, which is unavailable to obtain high-quality ZnO films in heteroepitaxy. One typical set of ZnO films were grown on (0001) ZnO substrates by molecular-beam epitaxy: a standard structure without buffer and two buffered structures with high-temperature (HT) homobuffer and low-temperature (LT) homobuffer. As a result, the LT homobuffered structure had the outstanding material properties: the surface roughness is 0.9 nm, the full width at half maximum of x-ray rocking curve is 13 arcsec, and the emission linewidth of donor-bound excitons is 2.4 meV. In terms of the theoretical interpretation of the experimentally obtained electron mobilities, it was found that the LT homobuffered structure suffers less from the dislocation scattering and the ionized-impurity scattering compared to the HT homobuffered structure. It is proposed that, in the ZnO low-temperature homoepitaxy, the LT homobuffer plays a key role in inducing the complete termination of dislocations in the homointerface and suppressing the outdiffusion of contaminants and point defects on the ZnO surface, which results in the formation of smooth wetting layer on the homointerface.

36 MATERIALS SCIENCE↗

Formation of donor centers upon the annealing of silicon light-emitting structures implanted with oxygen ions

It is found that the implantation of silicon with oxygen ions and subsequent annealing at high temperatures are accompanied by the formation of electrically active donor centers and by the p-n conversion of the conductivity of silicon. The concentration and spatial distribution of these centers depend on the annealing temperature. The results are accounted for by the interaction of oxygen atoms with intrinsic point defects formed upon the annealing of implantation damages.

36 MATERIALS SCIENCE↗

Polarized micro Raman scattering spectroscopy for curved edges of epitaxial graphene

This letter performed polarized microscopic laser Raman scattering spectroscopy on the curved edges of transferred epitaxial graphene on SiO{sub 2}/Si. The intensity ratio between the parallel and perpendicular polarized D band is evolved, providing a spectroscopy-based technique to probe the atomic-scale edge structures in graphene. A detailed analysis procedure for non-ideal disordered curved edges of graphene is developed combining the atomic-scale zigzag and armchair edge structures along with some point defects. These results could provide valuable information of the realistic edges of graphene at the atomic-scale that can strongly influence the performance of graphene-based nanodevices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local triboelectrification of an n-GaAs surface using the tip of an atomic-force microscope

The method of scanning Kelvin-probe microscopy is used to show that the effect of triboelectrification is observed when the tip of an atomic-force microscope interacts with the surface of n-GaAs epitaxial layers. The sign of the change in the potential indicates that the sample surface after triboelectrification becomes more negative. The observed specific features of the phenomena can be attributed to the thermally activated generation of point defects in the vicinity of the sample surface due to deformation caused by the tip.

36 MATERIALS SCIENCE↗

Lattice thermal conductivity of nanograined half-Heusler solid solutions

We report a phenomenological model of atomic weight, lattice constant, temperature, and grain size to calculate the high-temperature lattice thermal conductivity of nanograined solid solutions. The theoretical treatment developed here is reasonably consistent with the experimental results of n-type MNiSn and p-type MCoSb alloys, where M is the combination of Hf, Zr, and Ti. For disordered half-Heusler alloys with moderated grain sizes, we predict that the reduction in lattice thermal conductivity due to grain boundary scattering is independent of the scattering parameter, which characterizes the phonon scattering cross section of point defects. In addition, the lattice thermal conductivity falls off with temperature as T{sup –1∕2} around the Debye temperature.

36 MATERIALS SCIENCE↗

Characterization of the deep levels responsible for non-radiative recombination in InGaN/GaN light-emitting diodes

This paper presents an extensive investigation of the deep levels related to non-radiative recombination in InGaN/GaN light-emitting diodes (LEDs). The study is based on combined optical and deep-level transient spectroscopy measurements, carried out on LEDs with identical structure and with different values of the non-radiative recombination coefficient. Experimental data lead to the following, relevant, results: (i) LEDs with a high non-radiative recombination coefficient have a higher concentration of a trap (labeled as “e{sub 2}”) with an activation energy of 0.7 eV, which is supposed to be located close to/within the active region; (ii) measurements carried out with varying filling pulse duration suggest that this deep level behaves as a point-defect/dislocation complex. The Arrhenius plot of this deep level is critically compared with the previous literature reports, to identify its physical origin.

36 MATERIALS SCIENCE↗

Variation in band offsets at ZnO/Sn:In2O3 (ITO) heterojunctions measured by x-ray photoelectron spectroscopy

Rational design and optimization of efficient photovoltaics requires fundamental knowledge of both the materials properties of the individual components and the conduction and valence band alignments at the materials interfaces. Efficient collection of electrons photogenerated in the absorber material requires a small or zero conduction band offset at both the absorber/n-type semiconductor and the n-type semiconductor/electrode interfaces. Negative conduction band offsets result in an energy barrier to electron injection, while large positive conduction band offsets (a “cliff” arrangement) result in too much energy lost during injection. However, it is difficult to predict heterojunction band offsets from bulk materials properties. Experimental band alignments of semiconductor heterojunctions rarely conform to the Anderson model,1 which assumes the band alignments are determined solely by differences in the electron affinity of the two semiconductors. Chemical bonds at the heterojunction interface give rise to an interfacial dipole which influences the interfacial band alignment. Thus, the complex interplay between electron affinity differences, Fermi level matching, interface-induced gap states, and band bending determine heterojunction band alignments.2-5 Band alignments can also be modified by doping, point defects, or control of non-stoichiometry at the interface; since these parameters can be affected by processing conditions, they offer a mechanism to modify the band alignments of a given heterojunction system.

36 MATERIALS SCIENCE↗