Search NASA⌕ Search

SEARCH · Search NASA

Results for “Processing maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Hybrid methods for muon accelerator simulations with ionization cooling

Muon ionization cooling involves passing particles through solid or liquid absorbers. Careful simulations are required to design muon cooling channels. New features have been developed for inclusion in the transfer map code COSY Infinity to follow the distribution of charged particles through matter. To study the passage of muons through material, the transfer map approach alone is not sufficient. The interplay of beam optics and atomic processes must be studied by a hybrid transfer map-Monte-Carlo approach in which transfer map methods describe the deterministic behavior of the particles, and Monte-Carlo methods are used to provide corrections accounting for the stochastic nature of scattering and straggling of particles. The advantage of the new approach is that the vast majority of the dynamics are represented by fast application of the high-order transfer map of an entire element and accumulated stochastic effects. The gains in speed are expected to simplify the optimization of cooling channels which is usually computationally demanding. In conclusion, progress on the development of the required algorithms and their application to modeling muon ionization cooling channels is reported.

43 PARTICLE ACCELERATORS↗
NASA NTRS1978

A scene-analysis approach to remote sensing

The author has identified the following significant results. Geometric correspondance between a sensed image and a symbolic map is established in an initial stage of processing by adjusting parameters of a sensed model so that the image features predicted from the map optimally match corresponding features extracted from the sensed image. Information in the map is then used to constrain where to look in an image, what to look for, and how to interpret what is seen. For simple monitoring tasks involving multispectral classification, these constraints significantly reduce computation, simplify interpretation, and improve the utility of the resulting information. Previously intractable tasks requiring spatial and textural analysis may become straightforward in the context established by the map knowledge. The use of map-guided image analysis in monitoring the volume of water in a reservoir, the number of boxcars in a railyard, and the number of ships in a harbor is demonstrated.

Tenenbaum, J. M.↗
NASA NTRS1983

Correlation of 3 hour radiosonde data with coincident Nimbus-7 total ozone measurements

A special network exercise supporting the VAS demonstration is reported. The second near-real time total ozone mapping spectrometer (TOMS) activity involving out of sequence processing of Nimbus-7 data over the United States and Europe is presented. The ozone data maps were used by airlines to search for regions of clear air turbulence and by an aircraft data gathering program, for synoptic upper air and tropopause height analyses. The TOMS total ozone levels are correlated with radiosonde tropopause height for testing the ability of TOMS data to give independent satellite measurements of tropopause height.

Gatlin, J. A.↗
DOE OSTI2018

Volumetric calibration of a plenoptic camera

Here, the volumetric calibration of a plenoptic camera is explored to correct for inaccuracies due to real-world lens distortions and thin-lens assumptions in current processing methods. Two methods of volumetric calibration based on a polynomial mapping function that does not require knowledge of specific lens parameters are presented and compared to a calibration based on thin-lens assumptions. The first method, volumetric dewarping, is executed by creation of a volumetric representation of a scene using the thin-lens assumptions, which is then corrected in post-processing using a polynomial mapping function. The second method, direct light-field calibration, uses the polynomial mapping in creation of the initial volumetric representation to relate locations in object space directly to image sensor locations. The accuracy and feasibility of these methods is examined experimentally by capturing images of a known dot card at a variety of depths. Results suggest that use of a 3D polynomial mapping function provides a significant increase in reconstruction accuracy and that the achievable accuracy is similar using either polynomial-mapping-based method. Additionally, direct light-field calibration provides significant computational benefits by eliminating some intermediate processing steps found in other methods. Finally, the flexibility of this method is shown for a nonplanar calibration.

47 OTHER INSTRUMENTATION↗
NASA NTRS1985

Voyager Cartography

The Jovian and Saturnian satellites are being mapped at several scales from Voyager 1 and 2 data. The maps include specially formatted color mosaics, controlled photomosaics, and airbrush maps. More than 500 Voyager images of the Jovian and Saturnian satellites were radiometrically processed in preparation for cartographic processing. Of these images, 235 were geometrically transformed to map projections for base mosaic compilations. Special techniques for producing hybrid photomosaic/airbrush maps of Callisto are under investigation. The techniques involve making controlled computer mosaics of all available images with highest resolution images superimposed on lowest resolution images. The mosaics are then improved by airbrushing: seams and artifacts are removed, and image details enhanced that had been lost by saturation in some images. A controlled mosaic of the northern hemisphere of Rhea is complete, as is all processing for a similar mosaic of the equatorial region. Current plans and status of the various series are shown in a table.

Batson, R. M.↗
DOE OSTI2020

A global anthropogenic emission inventory of atmospheric pollutants from sector- and fuel-specific sources (1970–2017): an application of the Community Emissions Data System (CEDS)

Global anthropogenic emission inventories remain vital for understanding the sources of atmospheric pollution and the associated impacts on the environment, human health, and society. Rapid changes in today's society require that these inventories provide contemporary estimates of multiple atmospheric pollutants with both source sector and fuel type information to understand and effectively mitigate future impacts. To fill this need, we have updated the open-source Community Emissions Data System (CEDS) (Hoesly et al., 2019) to develop a new global emission inventory, CEDSGBD-MAPS. This inventory includes emissions of seven key atmospheric pollutants (NOx; CO; SO2; NH3; non-methane volatile organic compounds, NMVOCs; black carbon, BC; organic carbon, OC) over the time period from 1970–2017 and reports annual country-total emissions as a function of 11 anthropogenic sectors (agriculture; energy generation; industrial processes; on-road and non-road transportation; separate residential, commercial, and other sectors (RCO); waste; solvent use; and international shipping) and four fuel categories (total coal, solid biofuel, the sum of liquid-fuel and natural-gas combustion, and remaining process-level emissions). The CEDSGBD-MAPS inventory additionally includes monthly global gridded (0.5°?×?0.5°) emission fluxes for each compound, sector, and fuel type to facilitate their use in earth system models. CEDSGBD-MAPS utilizes updated activity data, updates to the core CEDS default scaling procedure, and modifications to the final procedures for emissions gridding and aggregation. Relative to the previous CEDS inventory (Hoesly et al., 2018), these updates extend the emission estimates from 2014 to 2017 and improve the overall agreement between CEDS and two widely used global bottom-up emission inventories. The CEDSGBD-MAPS inventory provides the most contemporary global emission estimates to date for these key atmospheric pollutants and is the first to provide global estimates for these species as a function of multiple fuel types and source sectors. Dominant sources of global NOx and SO2 emissions in 2017 include the combustion of oil, gas, and coal in the energy and industry sectors as well as on-road transportation and international shipping for NOx. Dominant sources of global CO emissions in 2017 include on-road transportation and residential biofuel combustion. Dominant global sources of carbonaceous aerosol in 2017 include residential biofuel combustion, on-road transportation (BC only), and emissions from the waste sector. Global emissions of NOx, SO2, CO, BC, and OC all peak in 2012 or earlier, with more recent emission reductions driven by large changes in emissions from China, North America, and Europe. In contrast, global emissions of NH3 and NMVOCs continuously increase between 1970 and 2017, with agriculture as a major source of global NH3 emissions and solvent use, energy, residential, and the on-road transport sectors as major sources of global NMVOCs. Due to similar development methods and underlying datasets, the CEDSGBD-MAPS emissions are expected to have consistent sources of uncertainty as other bottom-up inventories. The CEDSGBD-MAPS source code is publicly available online through GitHub: https://github.com/emcduffie/CEDS/tree/CEDS_GBD-MAPS (last access: 1 December 2020). The CEDSGBD-MAPS emission inventory dataset (both annual country-total and monthly global gridded files) is publicly available under https://doi.org/10.5281/zenodo.3754964 (McDuffie et al., 2020c).

Mcduffie, Erin↗
NASA NTRS1972

Remote sensing of soils, land forms, and land use in the northern Great Plains in preparation for ERTS applications

Research to determine the optimum time or season for obtaining imagery to identify and map soil limitations was conducted in the proposed Oahe irrigation project area in South Dakota. The optimum time for securing photographs or imagery is when the soil surface patterns are most apparent. For cultivated areas similar to the study area, May is the optimum time. The density slicing analysis of the May image provided additional and more accurate information than did the existing soil map. The soil boundaries were more accurately located. The use of a density analysis system for an operational soil survey has not been tested, but is obviously dependent upon securing excellent photographs for interpretation. The colors or densities of photographs will have to be corrected for sun angle effects, vignetting effects, and processing to have maximum effectiveness for mapping soil limitations. Rangeland sites were established in Bennett County, South Dakota to determine the usefulness of ERTS imagery. Imagery from these areas was interpreted for land use and drainage patterns.

Frazee, C. J.↗
NASA NTRS1981

NASA/BLM Applications Pilot Test (APT), phase 2. Volume 1: Executive summary

Data from LANDSAT, low altitude color aerial photography, and ground visits were combined and used to produce vegetation cover maps and to estimate productivity of range, woodland, and forest resources in northwestern Arizona. A planning session, two workshops, and four status reviews were held to assist technology transfer from NASA. Computer aided digital classification of LANDSAT data was selected as a major source of input data. An overview is presented of the data processing, data collection, productivity estimation, and map verification techniques used. Cost analysis and digital LANDSAT digital products are also considered.

Source record↗
NASA NTRS1982

MAGSAT and aeromagnetic data of the continental US

The MAGSAT data were used to produce a scalar anomaly map of the U.S. In order to remove the east-west striping anomalies, which are believed to be caused by the low-order polynomials used to reduce the orbital bias errors, a 2-D spectral filtering using the Fourier transform method was applied. The resultant low-pass filtered map, with the east-west stripings removed, resembles much closer the surface aeromagnetic map based on the U.S. MAGNET data. The spectral filtering was also applied to the MAGSAT vector data. Department of Defense gravity data was processed to produce a filtered U.S. gravity map whose spectral contents are comparable to those of the MAGSAT magnetic map.

Won, I. J.↗
DOE OSTI2025

A Comprehensive Framework for Assessing Terrestrial Analogue Field Sites for Ocean Worlds

Field studies at terrestrial analogue sites represent an important contribution to the science of ocean worlds. The value of the science and technology investigations conducted at field analogue sites depends on the relevance of the analogue environment to the target ocean world. We accept that there are no perfect analogues for many of the unique environments represented by ocean worlds but suggest that a one‐to‐one matching of environmental characteristics and conditions is not crucial to the success or impact of the work. Instead, we must determine which processes and parameters are required to map directly to the target ocean world environment with high fidelity to address the science question. In this review paper, we discuss the outcomes of a workshop aimed at developing a new framework for evaluating the suitability of analogue field locations for ocean worlds research. Here we present a two‐step approach to (a) identify the most crucial processes and parameters associated with a given science question and (b) assess the fidelity of these processes and parameters at a proposed field site to those expected for the target ocean world. We demonstrate this approach in a test case evaluating three types of ocean world analogue environments with respect to a science question. The consensus document presented here equips veteran and new investigators with valuable tools to better assess and justify their analogue site selections.

58 GEOSCIENCES↗
DOE OSTI2025

High-resolution leaf area index maps generated from unoccupied aerial system, Teller Mile 27, Seward Peninsula, Alaska

Leaf area index (LAI), a measure of the amount of one-side leaf area per ground unit, is an important indicator of plant carbon, energy, and water cycle. In the heterogeneous Arctic landscapes, it has been challenging to accurately measure LAI across species and space needed for Earth system model validation. Here, we use multispectral unoccupied aerial systems (UASs) to scale up and map leaf area index (LAI) , in a low-Arctic tundra landscape on the Seward Peninsula, Alaska. We linked previous published LAI measurements with high-resolution, UAS-collected multispectral data collected over the region of Next Generation Ecosystem Experiments in the Arctic (NGEE Arctic)’s Teller Mile Maker 27 site in 2022 to develop random forest (RF) machine learning models to predict and map LAI. 100 RF models were developed to account for uncertainties in ground LAI plot measurements and process scaling. This dataset includes a raster (*.tif) map of the mean LAI value of the 100 RF models, a raster (*.tif) map of the standard deviation of the RF-modeled LAI data, and a user guide (*.pdf).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Utah FORGE: GPS Data - Deformation Monitoring

This data bundle contains raw GPS data files and resulting data using Trimble Business Center and NOAA OPUS to process the GPS data in spreadsheets with station coordinates and elevations. A map of station locations is included along with the final processing report which includes pre-processing, pre-stack time migration, and pre-stack depth migration. It also contains a readme.text file goes into further explanation.

15 GEOTHERMAL ENERGY↗
DOE OSTI2018

Thermo-mechanical processing window for β phase recrystallization inTi-5Al-5Mo-5V-3Cr alloy

Highlights: • A processing window has been developed to obtain fine uniform recrystallized grains. • High deformation (90%) with annealing at intermediate temperature (950 °C) suggested • Dynamic recrystallization (Drx) should be avoided. • DRx reduces driving force for static rx. It gives bimodal distribution of grains. • Final deformation step should be in the α + β phase field. Ti-5Al-5Mo-5V-3Cr (Ti-5553) is a high strength β titanium alloy. It is now commonly used in thick section aerospace components. In general, the thermo-mechanical processing (TMP) of β titanium alloys done at high temperature to obtain uniformly recrystallized fine grain structure is one of the major challenges. Through this work, a TMP window for Ti-5553 (through systematic variation in % reduction and post deformation annealing temperature) has been developed to obtain fine uniformly recrystallized β grains. Grain size has been quantified on EBSD generated orientation maps, by applying stereological methods, image processing and automated reconstruction. Effects of % deformation and post deformation annealing temperature, as well as that of initial ingot size prior to deformation and the capacity of the forge on the static and dynamic recrystallization behavior, which eventually determine the final grain size distribution, have been illustrated.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Machine learning inversion from small-angle scattering for charged polymers

We develop Monte Carlo simulations for uniformly charged polymers and a machine learning algorithm to interpret the intra-polymer structure factor of the charged polymer system, which can be obtained from small-angle scattering experiments. The polymer is modeled as a chain of fixed-length bonds, where the connected bonds are subject to bending energy, and there is also a screened Coulomb potential for charge interaction between all joints. The bending energy is determined by the intrinsic bending stiffness, and the charge interaction depends on the interaction strength and screening length. All three contribute to the stiffness of the polymer chain and lead to longer and larger polymer conformations. The screening length also introduces a second length scale for the polymer besides the bending persistence length. To obtain the inverse mapping from the structure factor to these polymer conformation and energy-related parameters, we generate a large data set of structure factors by running simulations for a wide range of polymer energy parameters. We use principal component analysis to investigate the intra-polymer structure factors and determine the feasibility of the inversion using the nearest neighbor distance. We employ Gaussian process regression to achieve the inverse mapping and extract the characteristic parameters of polymers from the structure factor with low relative error.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Human-AI Collaboration Among Engineering and Design Professionals: Three Strategies of Generative AI Use

Designers are increasingly using Generative Artificial Intelligence (GenAI) in design processes; however, knowing how designers use GenAI--especially in professional design practice--is under-explored. This paper presents an ethnographic study of a design team at NASA that explores the natural variation of GenAI use across team members during a speculative design workflow. We aimed to uncover when, how, and why GenAI tools were or were not employed using ethnographic observations to map the team's speculative design process and follow-up interviews to provide deeper insights into team members' interactions (or lackthereof) with GenAI. Through inductive qualitative coding, our analysis revealed three strategies of GenAI use observed among professional engineers and designers--intimate co-design with GenAI, selective delegation to GenAI, and minimal use of GenAI--as well as factors that appeared to influence their decisions whether or not to use GenAI. This study proposes new theory in human-AI collaboration that sheds light on the strategies, rationale, and circumstances under which design professionals use GenAI. Future work that builds upon these insights include examining a larger sample size of engineering and design professionals in uncontrolled design process experiences and exploring the impact that design tasks, goals, and constraints have on a participants decision to leverage GenAI tools.

design practice↗
NASA NTRS1988

A model of electronic map interpretation

This paper describes an experiment that provides data for the development of a cognitive model of pilot flight navigation. The model views navigation as a process involving the alignment of mental images with the perceptual view out of the cockpit. The data support a three stage model: (1) the perceptual encoding of the map display, (2) mental rotation of the mental image, and (3) comparison of the image to the environment. The variables that significantly influence the processes embodied in the model in decreasing importance are: speed of processing, display sequencing, map complexity, and rotation angle of the map. The model can be used as a preliminary computational tool in predicting the navigational component of pilot situational awareness.

Aretz, Anthony J.↗
DOE OSTI2017

LUNUS, Version 0.1a

LUNUS software for generating 3D maps of diffuse scattering from macromolecular X-ray crystallography diffraction images. A set of tools needed for advanced refinement of crystal structures and crystallographic charge density models. Includes tools for processing X--ray diffraction images, charge density maps, and structure factors for analysis of diffuse X-ray scattering and charge density variations in crystallography. Specific methods include: elementary algebraic operations on images and 3D lattices; fourier transform of images and 3D lattices; image processing to measure diffuse intensity; crystallographic refinement; and 3D integration of diffuse intensity.

Wall, Michael↗