Search NASA⌕ Search

SEARCH · Search NASA

Results for “SCALE EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Effects of large-scale magnetic fields in the Venus ionosphere

Theoretical models of the ionosphere of Venus have been constructed in the past without due consideration of the fact that the ionosphere is sometimes magnetized. This paper examines some differences between the magnetized and unmagnetized dayside Venus ionosphere using the Pioneer Venus Orbiter Langmuir probe and magnetometer data. Particular attention is given to the evaluation of the altitude profiles of the thermal electron heating and comparison of the magnitude of the magnetic force with other forces in the ionosphere. Several examples illustrate how heating profiles are different in the magnetized ionosphere with effective heating below 200 km altitude reduced by orders of magnitude compared to the field-free ionosphere. The force associated with the magnetic field is comparable to other forces in the magnetized ionosphere. The measured plasma density, electron temperature and magnetic field thus suggest that large-scale magnetic fields should be included in future ionosphere models.

Luhmann, J. G.↗

Atomic-scale identification of Pd leaching in nanoparticle catalyzed C–C coupling: Effects of particle surface disorder

C–C coupling reactions are of great importance in the synthesis of numerous organic compounds, where Pd nanoparticle catalyzed systems represent new materials to efficiently drive these reactions. Despite their pervasive utility, the catalytic mechanism of these particle-based reactions remains highly contested. Herein we present evidence of an atom leaching mechanism for Stille coupling under aqueous conditions using peptide-capped Pd nanoparticles. EXAFS analysis revealed Pd coordination changes in the nanoparticle consistent with Pd atom abstraction, where sizing analysis by SAXS confirmed particle size changes associated with a leaching process. It is likely that recently discovered highly disordered surface Pd atoms are the favored catalytic active sites and are leached during oxidative addition, resulting in smaller particles. Thus, probing the mechanism of nanoparticle-driven C–C coupling reactions through structural analyses provides fundamental information concerning these active sites and their reactivity at the atomic-scale, which can be used to improve catalytic performance to meet important sustainability goals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of antimony nano-scale surface-structures on a GaSb/AlAsSb distributed Bragg reflector

Effects of antimony crystallization on the surface of GaSb during low temperature molecular beam epitaxy growth are investigated. The geometry of these structures is studied via transmission electron and atomic force microscopies, which show the surface metal forms triangular-shaped, elongated nano-wires with a structured orientation composed entirely of crystalline antimony. By depositing antimony on a GaSb/AlAsSb distributed Bragg reflector, the field is localized within the antimony layer. Polarization dependent transmission measurements are carried out on these nano-structures deposited on a GaSb/AlAsSb distributed Bragg reflector. It is shown that the antimony-based structures at the surface favor transmission of light polarized perpendicular to the wires.

36 MATERIALS SCIENCE↗

Curvaton dynamics revisited

We revisit the dynamics of the curvaton in detail taking account of effects from thermal environment, effective potential and decay/dissipation rate for general field values and couplings. We also consider the curvature perturbation generated through combinations of various effects: large scale modulation of the oscillation epoch, the effective dissipation rate and the timing at which the equation of state changes. In particular, we find that it tends to be difficult to explain the observed curvature perturbation by the curvaton mechanism without producing too large non-Gaussianity if the curvaton energy density is dissipated through thermal effects. In particular, we find that if the renormalizable coupling between the curvaton and light elements is larger than the critical value ∼ (m{sub φ}/M{sub pl}){sup 1/2}, the curvaton is soon dissipated away almost regardless of its initial energy density, contrary to the standard perturbative decay. Therefore, the interaction between them should be suppressed in order for the curvaton to survive the thermal dissipation.

79 ASTRONOMY AND ASTROPHYSICS↗

Biased Tracers in Redshift Space in the EFT of Large-Scale Structure

The Effective Field Theory of Large-Scale Structure (EFTofLSS) provides a novel formalism that is able to accurately predict the clustering of large-scale structure (LSS) in the mildly non-linear regime. Here we provide the first computation of the power spectrum of biased tracers in redshift space at one loop order, and we make the associated code publicly available. We compare the multipoles $\ell=0,2$ of the redshift-space halo power spectrum, together with the real-space matter and halo power spectra, with data from numerical simulations at $z=0.67$. For the samples we compare to, which have a number density of $\bar n=3.8 \cdot 10^{-2}(h \ {\rm Mpc}^{-1})^3$ and $\bar n=3.9 \cdot 10^{-4}(h \ {\rm Mpc}^{-1})^3$, we find that the calculation at one-loop order matches numerical measurements to within a few percent up to $k\simeq 0.43 \ h \ {\rm Mpc}^{-1}$, a significant improvement with respect to former techniques. By performing the so-called IR-resummation, we find that the Baryon Acoustic Oscillation peak is accurately reproduced. Based on the results presented here, long-wavelength statistics that are routinely observed in LSS surveys can be finally computed in the EFTofLSS. This formalism thus is ready to start to be compared directly to observational data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effective Elastic Coefficients for Reinforced Composite Material - 17029

The effective elastic coefficients for heterogeneous media periodic on the microscale are calculated by solving the micro-cell elasto-static problem numerically. The cell problem is obtained by applying the homogenization theory to periodic composite media. The geometry has a small inclusion of circular cross-section with longitudinal and transverse ribs which is embedded in the background material. The deformation is caused by traction force distributed on the interface between the two regions of different elastic moduli. The displacements are calculated by using ABAQUS and are used to determine the effective elastic coefficients on the macro-scale. The effects of the existence of reinforcement are with ribs are discussed. (authors)

36 MATERIALS SCIENCE↗

Near-Earth Magnetic Field Effects of Large-Scale Magnetospheric Currents

Magnetospheric currents play an important role in the electrodynamics of near- Earth space. This has been the topic of many space science studies. Here we focus on the magnetic fields they cause close to Earth. Their contribution to the geomagnetic field is the second largest after the core field. Significant progress in interpreting the magnetic fields from the different sources has been achieved thanks to magnetic satellite missions like Ørsted, CHAMP and now Swarm. Of particular interest for this article is a proper representation of the magnetospheric ring current effect. Uncertainties in modelling its effect still produce the largest residuals between observations and present-day geomagnetic field models. A lot of progress has been achieved so far, but there are still open issues like the characteristics of the partial ring current. Other currents discussed are those flowing in the magnetospheric tail. Also their magnetic contribution at LEO orbits is non-negligible. Treating them as an independent source is a more recent development, which has cured some of the problems in geomagnetic field modelling. Unfortunately there is no index available for characterizing the tail current intensity. Here we propose an approach that may help to properly quantify the magnetic contribution from the tail current for geomagnetic field modelling. Some open questions that require further investigation are mentioned at the end.

Magnetospheric currents↗

Shadow of a colossus: A z = 2.44 galaxy protocluster detected in 3D Lyα forest tomographic mapping of the cosmos field

Using moderate-resolution optical spectra from 58 background Lyman-break galaxies and quasars at z∼2.3--3 within a 11.′5 × 13.′5 area of the COSMOS field (∼1200 deg{sup −2} projected area density or ∼2.4 h{sup −1} Mpc mean transverse separation), we reconstruct a 3D tomographic map of the foreground Lyα forest absorption at 2.2 < z < 2.5 with an effective smoothing scale of ϵ{sub 3D}≈2.5 h{sup −1} Mpc comoving. Comparing with 61 coeval galaxies with spectroscopic redshifts in the same volume, we find that the galaxy positions are clearly biased toward regions with enhanced intergalactic medium (IGM) absorption in the tomographic map. We find an extended IGM overdensity with deep absorption troughs at z = 2.45 associated with a recently discovered galaxy protocluster at the same redshift. Based on simulations matched to our data, we estimate the enclosed dark matter mass within this IGM overdensity to be M{sub dm}(z=2.45)=(1.1±0.6)×10{sup 14} h{sup −1}M{sub ⊙}, and argue based on this mass and absorption strength that it will form at least one z ∼ 0 galaxy cluster with M(z=0)=(3±1.5)×10{sup 14} h{sup −1}M{sub ⊙}, although its elongated nature suggests that it will likely collapse into two separate clusters. We also point out a compact overdensity of six MOSDEF galaxies at z = 2.30 within a r∼1 h{sup −1} Mpc radius and Δz ∼ 0.006, which does not appear to have a large associated IGM overdensity. These results demonstrate the potential of Lyα forest tomography on larger volumes to study galaxy properties as a function of environment, as well as revealing the large-scale IGM overdensities associated with protoclusters or other features of large-scale structure.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of similarity metrics for simulation based scaling analysis

Scaling analysis is a technique for characterizing degree of similarity between processes to occur in a real prototypic system and those to occur in its reduced scale (experimental) analog. In the context of nuclear reactor thermal-hydraulics and safety, scaling analysis is instrumental in assessing the applicability of data obtained from a scaled test facility for calibration of models and validation of simulation codes. Quantification of scale-related distortions is the key element in scaling analysis. In this work, we examine an approach for scaling analysis using computer simulation codes. Similarity analysis using information-theoretic approach is performed by comparing performance of experiment and application to variation of system conditions. Three different information theoretic measures namely mutual information, Kullback-Leibler divergence and overlap coefficient are selected for their potential use as metric for similarity analysis. We test the metrics by comparing them against physics-based scaling ratios, which are well known in fundamental thermal-hydraulic processes. In this exploratory analysis, a case of pressure drop of a steady-state flow through a channel is employed to test the proposed approach. It was found that in the absence of model uncertainties, mutual information serve as an effective measure of the scale effects present in the experiment. However, model uncertainty can significantly impact the quality of similarity analysis. Our analysis indicates that model uncertainties can have significant impact on the information theoretic metrics used for scaling analysis. Furthermore, if the model uncertainties exceeds beyond a critical value, the scale effect present in the experiment cannot be adequately evaluated. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Measurements of pore-scale flow through apertures

Pore-scale aperture effects on flow in pore networks was studied in the laboratory to provide a parameterization for use in transport models. Four cases were considered: regular and irregular pillar/pore alignment with and without an aperture. The velocity field of each case was measured and simulated, providing quantitatively comparable results. Two aperture effect parameterizations were considered: permeability and transmission. Permeability values varied by an order of magnitude between the cases with and without apertures. However, transmission did not correlate with permeability. Despite having much greater permeability the regular aperture case permitted less transmission than the regular case. Moreover, both irregular cases had greater transmission than the regular cases, a difference not supported by the permeabilities. Overall, these findings suggest that pore-scale aperture effects on flow though a pore-network may not be adequately captured by properties such as permeability for applications that are interested in determining particle transport volume and timing.

58 GEOSCIENCES↗

Lateral vibration effects in atomic-scale friction

The influence of lateral vibrations on the stick-slip motion of a nanotip elastically pulled on a flat crystal surface is studied by atomic force microscopy measurements on a NaCl(001) surface in ultra-high vacuum. The slippage of the nanotip across the crystal lattice is anticipated at increasing driving amplitude, similarly to what is observed in presence of normal vibrations. This lowers the average friction force, as explained by the Prandtl-Tomlinson model with lateral vibrations superimposed at finite temperature. Nevertheless, the peak values of the lateral force, and the total energy losses, are expected to increase with the excitation amplitude, which may limit the practical relevance of this effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Results of an investigation of hypersonic viscous interaction effects on and 0.01 scale Space Shuttle Orbiter 51-0 model in the AEDC-VKF Hypervelocity Wind Tunnel (0A81)

The major hypersonic aerodynamic results obtained experimentally from the 0.010-scale (51-0) 140A/B orbiter vehicle are presented. The test was conducted over an angle-of-attack range from 20 to 35 degrees for nominal Mach numbers of 16 and 20. The Mach 16 data were obtained at Reynolds numbers, based on model length, of nominally 0.54 x 106 and 1.18 x 106. The Mach number 20 data were obtained at nominal Reynolds numbers of 0.08 x 106 and 0.27 x 106. Various elevon deflections and body flap deflections were tested for determination of control effectiveness. The test objectives were: (1) verify December 1973 aerodynamic Design Data Book estimates for Mach number greater than 10; (2) determine configuration forward and aft trim boundaries and control characteristics; (3) determine high Mach number - low Reynolds number effects; (4) determine if positive control surface flow separation is present and magnitude of separation effects.

Elder, D. J.↗

Search for Large Extra Spatial Dimensions in the Dielectron and Diphoton Channels in pp Collisions at {radical}(s)=1.96 TeV

We report on a search for large extra spatial dimensions in the dielectron and diphoton channels using a data sample of 1.05 fb{sup -1} of pp collisions at a center-of-mass energy of 1.96 TeV collected by the D0 detector at the Fermilab Tevatron Collider. The invariant mass spectrum of the data agrees well with the prediction of the standard model. We find the most restrictive 95% C.L. lower limits on the effective Planck scale between 2.1 and 1.3 TeV for 2 to 7 extra dimensions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Free vorticity field-boundary layer conversions: Effect of boundary configuration and scale

Progress was made on further flow visualization of vortex-leading edge interaction, in conjunction with characterization of the unsteady pressure field. The range of scale of an elliptical leading edge, relative to the incident primary vortex, was determined. The scale of the incident vortex was characterized in terms of mean shear layer parameters. An overview of the interaction mechanism for the range of thin to thick leading-edges is given. The interaction mechanism corresponding to the case where the incident vortex is above the leading-edge is given for hydrogen bubble wires well upstream of and at the tip of the leading edge. A sample of the instantaneous pressure distribution for the case where the incident vortex dives beneath the edge is presented. The effect of scale of the incident vortex relative to that of the leading-edge was examined. The circulation and length scale of the incident vortices in the street are being characterized.

Rockwell, D.↗

Award ER25844: Minimizing System Noise Effects for Extreme-Scale Scientific Simulation Through Function Delegation

In software running on distributed computing clusters, time spent on communication between nodes in the cluster can be a significant portion of the overall computation time; background operating system tasks and other computational noise on the nodes of the system can have a significant impact on the amount of time this communication takes, especially on large systems. The research completed in this period has improved understanding of when such noise will have a significant impact. Specifically, it was demonstrated that not just noise on the nodes, but also noise on the network between nodes can have a significant impact on computation time. It was also demonstrated that noise patterns matter more than noise intensity: very regular noise can cause less disruption than lighter (on average) but less regular noise. It was also demonstrated that the effect of noise is more prominent as the speed of the network between nodes is increased. Furthermore, a tracing tool, Netgauge, was improved via our work, and a system simulator, LogGOPSim, was developed; they can be used by application developers to improve performance of their program and by system designers to mitigate the effects of noise by adjusting the noise characteristics of the operating system. Both have been made freely available as open source programs. In the course of developing these tools, we demonstrated weaknesses in existing methodologies for modeling communication, and we introduced a more detailed model, LogGOPS, for simulating systems. Not only were the deleterious effects of noise explored but we have also offered solutions. Our studies of simulations of system noise have led to specific recommendations on tuning systems to mitigate noise. We have also improved existing approaches to mitigating noise. Non-blocking collective communication avoids the effects of noise by letting communication continue simultaneously with computation (thus being non-blocking), so that the delays in communication introduced by noise have a smaller impact on overall computation time. Potentially, noise can be reduced much further by offloading communication tasks to a separate processing element than the operating system is using. We have improved our library LibNBC, which provides an implementation of non-blocking collectives, via this work. During this research, our proposal to include non-blocking collectives (which used LibNBC as a reference implementation) in the upcoming MPI-3 standard was accepted. As MPI is a ubiquitous and important standard for communication in parallel computing, this demonstrates a certain acceptance of the practicality and desirability of non-blocking collectives. Now that non-blocking collectives are a part of the standard we can expect to see optimized platform-specific implementations of non-blocking collectives. Also as part of this work we have also developed a language GOAL (Global Operation Assembly Language) that can be used as a starting point for defining languages to express optimized communication algorithms.

97 MATHEMATICS AND COMPUTING↗

Search for dark matter in events with heavy quarks and missing transverse momentum in p p collisions with the ATLAS detector

CERN-LHC. This article reports on a search for dark matter pair production in association with bottom or top quarks in 20.3 fb 8 of pp collisions collected at sqrt(s) = 8 TeV by the ATLAS detector at the LHC. Events with large missing transverse momentum are selected when produced in association with high-momentum jets of which one or more are identified as jets containing b -quarks. Final states with top quarks are selected by requiring a high jet multiplicity and in some cases a single lepton. The data are found to be consistent with the Standard Model expectations and limits are set on the mass scale of effective field theories that describe scalar and tensor interactions between dark matter and Standard Model particles. Limits on the dark-matter=8 TeV by the ATLAS detector at the LHC. Events with large missing transverse momentum are selected when produced in association with high-momentum jets of which one or more are identified as jets containing b-quarks. Final states with top quarks are selected by requiring a high jet multiplicity and in some cases a single lepton. The data are found to be consistent with the Standard Model expectations and limits are set on the mass scale of effective field theories that describe scalar and tensor interactions between dark matter and Standard Model particles. Limits on the dark-matter--nucleon cross-section for spin-independent and spin-dependent interactions are also provided. These limits are particularly strong for low-mass dark matter. Using a simplified model, constraints are set on the mass of dark matter and of a coloured mediator suitable to explain a possible signal of annihilating dark matter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Scale–Bridging in Three–Dimensional Fracture Networks: Characterizing the Effects of Variable Fracture Apertures on Network–Scale Flow Channelization

Here, we incorporate observations of real fracture aperture variability observed in laboratory experiments into an ensemble of three-dimensional discrete fracture network (DFN) simulations to characterize how variations of this micro-scale feature can influence flow and transport behavior at the network scale. A shear fracture is created within a Marcellus shale sample, and the fracture aperture is measured using a triaxial direct-shear device coupled with real-time X-ray imaging at in-situ stress conditions. We construct an ensemble of fracture networks based on natural fractures in Marcellus shale and project regions of the experimental aperture field onto each fracture in the networks. Our calculations demonstrate that the degree of flow channelization, a network-scale flow field structure, is dramatically increased by local changes in the aperture field that in turn affects flow and transport properties.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Limits on large extra dimensions based on observations of neutron stars with the Fermi-LAT

We present limits for the compactification scale in the theory of Large Extra Dimensions (LED) proposed by Arkani-Hamed, Dimopoulos, and Dvali. We use 11 months of data from the Fermi Large Area Telescope (Fermi-LAT) to set gamma ray flux limits for 6 gamma-ray faint neutron stars (NS). To set limits on LED we use the model of Hannestad and Raffelt (HR) that calculates the Kaluza-Klein (KK) graviton production in supernova cores and the large fraction subsequently gravitationally bound around the resulting NS. The predicted decay of the bound KK gravitons to γγ should contribute to the flux from NSs. Considering 2 to 7 extra dimensions of the same size in the context of the HR model, we use Monte Carlo techniques to calculate the expected differential flux of gamma-rays arising from these KK gravitons, including the effects of the age of the NS, graviton orbit, and absorption of gamma-rays in the magnetosphere of the NS. We compare our Monte Carlo-based differential flux to the experimental differential flux using maximum likelihood techniques to obtain our limits on LED. Our limits are more restrictive than past EGRET-based optimistic limits that do not include these important corrections. Additionally, our limits are more stringent than LHC based limits for 3 or fewer LED, and comparable for 4 LED. We conclude that if the effective Planck scale is around a TeV, then for 2 or 3 LED the compactification topology must be more complicated than a torus.

79 ASTRONOMY AND ASTROPHYSICS↗