Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Effect of Basicity and Structure on the Hydration of Protonated Molecules, Proton-Bound Dimer and Cluster Formation: An Ion Mobility-Time of Flight Mass Spectrometry and Theoretical Study

Protonation, hydration, and cluster formation of ammonia, formaldehyde, formic acid, acetone, butanone, 2-ocatanone, 2-nonanone, acetophenone, ethanol, pyridine, and its derivatives were studied by IMS-TOFMS technique equipped with a corona discharge ion source. It was found that tendency of the protonated molecules, MH{sup +}, to participate in hydration or cluster formation depends on the basicity of M. The molecules with higher basicity were hydrated less than those with lower basicity. The mass spectra of the low basic molecules such as formaldehyde exhibited larger clusters of M{sub n}H{sup +}(H{sub 2}O){sub n}, while for compounds with high basicity such as pyridine, only MH{sup +} and MH{sup +}M peaks were observed. The results of DFT calculations show that enthalpies of hydrations and cluster formation decrease as basicities of the molecules increases. Using comparison of mass spectra of formic acid, formaldehyde, and ethanol, effect of structure on the cluster formation was also investigated. Formation of symmetric (MH{sup +}M) and asymmetric proton-bound dimers (MH{sup +}N) was studied by ion mobility and mass spectrometry techniques. Both theoretical and experimental results show that asymmetric dimers are formed more easily between molecules (M and N) with comparable basicity. As the basicity difference between M and N increases, the enthalpy of MH{sup +}N formation decreases. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Mesoscale Effects in Electrochemical Conversion: Coupling of Chemistry to Atomic- and Nanoscale Structure in Iron-Based Electrodes

The complex coupling of atomic, chemical, and electronic transformations across multiple length scales underlies the performance of electrochemical energy storage devices. Here, the coupling of chemistry with atomic- and nanoscale structure in iron conversion electrodes is resolved by combining pair distribution function (PDF) and small-angle X-ray scattering (SAXS) analysis for a series of Fe fluorides, oxyfluorides, and oxides. The data show that the anion chemistry of the initial electrode influences the abundance of atomic defects in the Fe atomic lattice. This, in turn, is linked to different atom mobilities and propensity for particle growth. Competitive nanoparticle growth in mixed anion systems contributes to a distinct nanostructure, without the interconnected metallic nanoparticles formed for single anion systems.

36 MATERIALS SCIENCE↗

1.5 MeV proton irradiation effects on electrical and structural properties of TiO{sub 2}/n-Si interface

In this paper, we report the effect of 1.5 MeV proton beam irradiation dose on the structural and electrical properties of TiO{sub 2} thin films deposited on n–Si substrates. The formation and transformation of different TiO{sub 2} phases in the irradiated thin films were characterized by X-ray diffraction and X-ray photoelectron spectroscopy (XPS). X-ray diffraction measurements revealed that the as grown film was rich in Ti{sub 5}O{sub 9} phase and then converted to mixed phases of TiO{sub 2} (rutile and anatase) after exposure with radiation doses up to 5 × 10{sup 14} cm{sup −2}. The XPS results revealed the formation of oxygen vacancy (negative) traps in the exposed TiO{sub 2} films, which showed strong dependence on the dose. The C-V measurements showed that proton radiations also damaged the Si substrate and created deep level defects in the substrate, which caused a shift of 0.26 ± 0.01 V in the flat band voltage (V{sub FB}). I–V measurements showed that the ideality factor increased and the rectification ratio dropped with the increase in the radiation dose. The present study showed the stability of TiO{sub 2}/Si interface and TiO{sub 2} film as an oxide layer against proton radiations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of alkaline pretreatment methods on cellulose structure and accessibility

The effects of different alkaline pretreatments on cellulose structural features and accessibility are compared and correlated with the enzymatic hydrolysis of Populus . The pretreatments are shown to modify polysaccharides and lignin content to enhance the accessibility for cellulase enzymes. The highest increase in the cellulose accessibility was observed in dilute sodium hydroxide, followed by methods using ammonia soaking and lime (Ca(OH) 2 ). The biggest increase of cellulose accessibility occurs during the first 10 min of pretreatment, with further increases at a slower rate as severity increases. Low temperature ammonia soaking at longer residence times dissolved a major portion of hemicellulose and exhibited higher cellulose accessibility than high temperature soaking. Moreover, the most significant reduction of degree of polymerization (DP) occurred for dilute sodium hydroxide (NaOH) and ammonia pretreated Populus samples. The study thus identifies important cellulose structural features and relevant parameters related to biomass recalcitrance.

09 BIOMASS FUELS↗

The Effect of the Hyperfine Structure of an Excited Level on the Shape of the Coherent Population Trapping Resonance under Ramsey Interrogation in an Optically Dense Medium

The effect of the hyperfine structure of an excited level on the shape of the coherent population trapping (CPT) resonance under Ramsey interrogation is investigated in media with different optical thicknesses. The shape of the CPT resonance is constructed for optically thin and dense media, and the results are compared. The dependence of the light shift on the optical density of a medium is analyzed. The parameters of the field phases are determined for which the light shift remains constant under fluctuations of the optical thickness of the medium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Anisotropic Confinement on Electronic Structure and Dynamics of Band Edge Excitons in Inorganic Perovskite Nanowires

Inorganic lead halide perovskite nanostructures show promise as the active layers in photovoltaics, light emitting diodes, and other optoelectronic devices. They are robust in the presence of oxygen and water, and the electronic structure and dynamics of these nanostructures can be tuned through quantum confinement. Here we create aligned bundles of CsPbBr3 nanowires with widths resulting in quantum confinement of the electronic wave functions and subject them to ultrafast microscopy. We directly image rapid one-dimensional exciton diffusion along the nanowires, and we measure an exciton trap density of roughly one per nanowire. Using transient absorption microscopy, we observe a polarization-dependent splitting of the band edge exciton line, and from the polarized fluorescence of nanowires in solution, we determine that the exciton transition dipole moments are anisotropic in strength. Furthermore, our observations are consistent with a model in which splitting is driven by shape anisotropy in conjunction with long-range exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Si/Ge hetero-structure nanotube tunnel field effect transistor

We discuss the physics of conventional channel material (silicon/germanium hetero-structure) based transistor topology mainly core/shell (inner/outer) gated nanotube vs. gate-all-around nanowire architecture for tunnel field effect transistor application. We show that nanotube topology can result in higher performance through higher normalized current when compared to nanowire architecture at V{sub dd} = 1 V due to the availability of larger tunneling cross section and lower Shockley-Reed-Hall recombination. Both architectures are able to achieve sub 60 mV/dec performance for more than five orders of magnitude of drain current. This enables the nanotube configuration achieving performance same as the nanowire architecture even when V{sub dd} is scaled down to 0.5 V.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

InGaN-based thin film solar cells: Epitaxy, structural design, and photovoltaic properties

In{sub x}Ga{sub 1−x}N, with the tunable direct bandgaps from ultraviolet to near infrared region, offers a promising candidate for the high-efficiency next-generation thin-film photovoltaic applications. Although the adoption of thick InGaN film as the active region is desirable to obtain efficient light absorption and carrier collection compared to InGaN/GaN quantum wells structure, the understanding on the effect from structural design is still unclear due to the poor-quality InGaN films with thickness and difficulty of p-type doping. In this paper, we comprehensively investigate the effects from film epitaxy, doping, and device structural design on the performances of the InGaN-based solar cells. The high-quality InGaN thick film is obtained on AlN/sapphire template, and p-In{sub 0.08}Ga{sub 0.92}N is achieved with a high hole concentration of more than 10{sup 18 }cm{sup −3}. The dependence of the photovoltaic performances on different structures, such as active regions and p-type regions is analyzed with respect to the carrier transport mechanism in the dark and under illumination. The strategy of improving the p-i interface by using a super-thin AlN interlayer is provided, which successfully enhances the performance of the solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Centrosymmetry vs noncentrosymmetry in La{sub 2}Ga{sub 0.33}SbS{sub 5} and Ce{sub 4}GaSbS{sub 9} based on the interesting size effects of lanthanides: Syntheses, crystal structures, and optical properties

Two new quaternary sulfides La{sub 2}Ga{sub 0.33}SbS{sub 5} and Ce{sub 4}GaSbS{sub 9} have been prepared from stoichiometric elements at 1223 K in an evacuated silica tube. Interestingly, La{sub 2}Ga{sub 0.33}SbS{sub 5} crystallizes in the centrosymmetric structure, while Ce{sub 4}GaSbS{sub 9} crystallizes in the noncentrosymmetric structure, which show obvious size effects of lanthanides on the crystal structures of these two compounds. Ce{sub 4}GaSbS{sub 9} belongs to RE{sub 4}GaSbS{sub 9} (RE=Pr, Nd, Sm, Gd–Ho) structure type with a=13.8834(9) Å, b=14.3004(11) Å, c=14.4102(13) Å, V=2861.0(4) Å{sup 3}. The structure features infinite chains of [Ga{sub 2}Sb{sub 2}S{sub 11}{sup 10–}]{sub ∞} propagating along a direction separated by Ce{sup 3+} cations and S{sup 2−} anions. La{sub 2}Ga{sub 0.33}SbS{sub 5} adopts the family of La{sub 4}FeSb{sub 2}S{sub 10}-related structure with a=7.5193(6) Å, c=13.4126(17) Å, V=758.35(13) Å{sup 3}. Its structure is built up from the alternate stacking of La/Sb/S and La/Ga/S 2D building blocks. The La/Sb/S slabs consist of teeter-totter chains of Sb1S{sub 4} seesaws, which are connected via sharing the apexes of μ{sub 4}-S1. Moreover, La1 is positionally disordered with Sb1 and stabilized in a bicapped trigonal prismatic coordination sphere. Between these La/Sb/S slabs, La2S{sub 8} square antiprisms are connected via edge-sharing into 2D building blocks, creating tetrahedral sites partially occupied by the Ga1 atoms. UV/Vis diffuse reflectance spectroscopy study shows that the optical gap of La{sub 2}Ga{sub 0.33}SbS{sub 5} is about 1.76 eV. - Graphical abstract: Two new quaternary sulfides La{sub 2}Ga{sub 0.33}SbS{sub 5} and Ce{sub 4}GaSbS{sub 9} have been prepared by solid-state reactions. Ce{sub 4}GaSbS{sub 9} crystallizes in RE{sub 4}GaSbS{sub 9} (RE=Pr, Nd, Sm, Gd–Ho) structure type, while La{sub 2}Ga{sub 0.33}SbS{sub 5} belongs to the family of La{sub 4}FeSb{sub 2}S{sub 10}-related structure and exhibits an optical gap of 1.76 eV. - Highlights: • Two new quaternary sulfides La{sub 2}Ga{sub 0.33}SbS{sub 5} and Ce{sub 4}GaSbS{sub 9} have been prepared by solid-state reaction. • Ce{sub 4}GaSbS{sub 9} crystallizes in RE{sub 4}GaSbS{sub 9} (RE=Pr, Nd, Sm, Gd–Ho) structure type, while La{sub 2}Ga{sub 0.33}SbS{sub 5} belongs to the family of La{sub 4}FeSb{sub 2}S{sub 10}-related structure. • The optical gap of 1.76 eV for La{sub 2}Ga{sub 0.33}SbS{sub 5} was deduced from UV/Vis reflectance spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effect of Irradiation with Si{sup +} Ions on Resistive Switching in Memristive Structures Based on Yttria-Stabilized Zirconia

We have studied the resistive switching in memristive structures based on 40-nm-thick yttria-stabilized zirconia (YSZ) films exposed to 6-keV Si{sup +} ion irradiation to a total dose of 5.4 × 10{sup 15} cm{sup –2}. It is established that the ion irradiation leads to increased stability of the parameters of resistive switching in YSZ based memristive structures. This effect is related to the fact that the diameter of conducting filaments in irradiated structures is limited by lateral dimensions of the region of atomic displacement cascades (i.e., the region occupied by point defects produced by bombarding ions). The oxidation of ion-modified filaments during resistive switching proceeds more effectively and leads to increasing resistance in the high-resistance state of memristive structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the Segmental Structure of Thermoplastic Polyurethane (Hardness) on the Interfacial Adhesion of Textile-Grade Carbon Fiber Composites

In polymer composites, the fiber–matrix interface is primarily influenced by the surface treatment of the fibers and polymer morphology. Previous studies have investigated the effect of surface treatment of carbon fiber on the mechanical properties of the resulting composites. However, very few studies have explored the chemical structural modification of polymer effect on the fiber–matrix adhesion. In this work, the interfaces of soft thermoplastic polyurethane (S-TPU) and hard-segmented TPU (H-TPU) were investigated through surface, thermal, and mechanical characterization. A textile-grade carbon fiber (TCF) with 1% concentration of epoxy sizing (an emerging material for nonaerospace applications with 450 K filament tows) was used as a reinforcement to investigate the structure–property relationship at the interface. Atomic force microscopy results showed 39% higher surface roughness for S-TPU than for H-TPU. X-ray photoelectron spectroscopy results revealed a 550% increase in C=O content, which can provide multiple hydrogen bonding networks in H-TPU, and these C=O bonds can produce a strong chemical bond at the fiber–matrix interface. Additionally, dynamic mechanical analysis and differential scanning calorimetry results confirmed the presence of hydrogen bonding that enhances the cross-linked density by 232% in H-TPU compared to S-TPU. The improved mechanical properties of H-TPU composites, such as flexural, impact and tensile by 30, 50, and 130% compared to S-TPU composites, prove that the crystallinity and hydrogen bonding significantly increase the load bearing capacity due to the strong interface. The mechanical properties of TCF–TPU composites validate the formation of chemical bonds through a nucleophilic addition reaction at the interface and improve the bond strength of the composites. Thus, tailoring the polyurethane structure broadens the performance of segmented TPU in conjunction with TCF reinforcement, which has implications for cost-effective, high-strength composites.

36 MATERIALS SCIENCE↗

Selectively Deuterated Poly(ε-caprolactone)s: Synthesis and Isotope Effects on the Crystal Structures and Properties

Selective deuteration is an important tool for many analytical techniques including neutron scattering and spectroscopies. However, the availability of deuterated materials is limited because of the challenges in their synthesis. Here, we report the synthesis of partially and fully deuterated ε-caprolactone monomers and their corresponding polymers, poly(ε-caprolactone)s (PCLs), and the investigation of isotope effects on their crystalline structures and physical properties. Deuteration of PCLs leads to smaller crystal lattices and volumes compared to protiated PCLs by the amount proportional to the deuteration levels. The linear trend suggests that the volume isotope effect in PCL is primarily governed by the vibrations of C–D and C–H bonds. The large intrachain contraction of deuterated PCLs compared to that of polyethylene reported in the literature can be ascribed to the presence of polar ester groups in PCLs. Deuterated PCLs also display lower melting temperatures than protiated PCLs proportional to their deuteration levels because of weaker intermolecular interactions in deuterated polymers. FTIR spectroscopy, with support from density functional theory calculations, shows large red shifts of the stretching and bending frequencies of C–D versus C–H bonds as dictated by their relative reduced masses √13/7, and to a smaller degree for the C=O stretching frequency. This work is among the very few studies comparing the effects of partial versus full deuteration on the structures and properties in semicrystalline polymers. Furthermore, these results not only advance our understanding of isotope effects in polymeric materials but also provide an important avenue to design polymers with desirable properties.

36 MATERIALS SCIENCE↗

Interface and photoluminescence characteristics of graphene-(GaN/InGaN){sub n} multiple quantum wells hybrid structure

The effects of graphene on the optical properties of active system, e.g., the InGaN/GaN multiple quantum wells, are thoroughly investigated and clarified. Here, we have investigated the mechanisms accounting for the photoluminescence reduction for the graphene covered GaN/InGaN multiple quantum wells hybrid structure. Compared to the bare multiple quantum wells, the photoluminescence intensity of graphene covered multiple quantum wells showed a 39% decrease after excluding the graphene absorption losses. The responsible mechanisms have been identified with the following factors: (1) the graphene two dimensional hole gas intensifies the polarization field in multiple quantum wells, thus steepening the quantum well band profile and causing hole-electron pairs to further separate; (2) a lower affinity of graphene compared to air leading to a weaker capability to confine the excited hot electrons in multiple quantum wells; and (3) exciton transfer through non-radiative energy transfer process. These factors are theoretically analysed based on advanced physical models of semiconductor devices calculations and experimentally verified by varying structural parameters, such as the indium fraction in multiple quantum wells and the thickness of the last GaN quantum barrier spacer layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of gender and age structure on municipal waste generation in Poland

Highlights: • An effect of gender and age structure on municipal waste generation was presented. • The waste accumulation index is influenced by a number of unemployed women. • Greater share of women in society contributes to greater waste production. • A model describing the analyzed dependences was determined. - Abstract: In this study the effect of gender and age structure on municipal waste generation was investigated. The data from 10-year period, from 2001 to 2010 year, were taken into consideration. The following parameters of gender and age structure were analyzed: men and woman quantity, female to male ratio, number of working, pre-working and post-working age men/women, number of unemployed men/women. The results have showed a strong correlation of annual per capita waste generation rate with number of unemployed women (r = 0.70) and female to male ratio (r = 0.81). This indicates that waste generation rate is more depended on ratio of men and women that on quantitative size of each group. Using the regression analysis a model describing the dependence between female to male ratio, number of unemployed woman and waste quantity was determined. The model explains 70% of waste quantity variation. Obtained results can be used both to improve waste management and to a fuller understanding of gender behavior.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High Thermoelectric Performance in Chalcopyrite Cu 1-x Ag x GaTe 2 –ZnTe: Nontrivial Band Structure and Dynamic Doping Effect

The understanding of thermoelectric properties of ternary I–III–VI 2 type (I = Cu, Ag; III = Ga, In; and VI = Te) chalcopyrites is less well developed. Although their thermal transport properties are relatively well studied, the relationship between the electronic band structure and charge transport properties of chalcopyrites has been rarely discussed. In this study, we reveal the unusual electronic band structure and the dynamic doping effect that could underpin the promising thermoelectric properties of Cu 1–x Ag x GaTe 2 compounds. Density functional theory (DFT) calculations and electronic transport measurements suggest that the Cu 1–x Ag x GaTe 2 compounds possess an unusual non-parabolic band structure, which is important for obtaining a high Seebeck coefficient. Moreover, a mid-gap impurity level was also observed in Cu 1–x Ag x GaTe 2 , which leads to a strong temperature-dependent carrier concentration and is able to regulate the carrier density at the optimized value for a wide temperature region and thus is beneficial to obtaining the high power factor and high average ZT of Cu 1–x Ag x GaTe 2 compounds. We also demonstrate a great improvement in the thermoelectric performance of Cu 1–x Ag x GaTe 2 by introducing Cu vacancies and ZnTe alloying. The Cu vacancies are effective in increasing the hole density and the electrical conductivity, while ZnTe alloying reduces the thermal conductivity. As a result, a maximum ZT of 1.43 at 850 K and a record-high average ZT of 0.81 for the Cu 0.68 Ag 0.3 GaTe 2 –0.5%ZnTe compound are achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intriguing structures and magic sizes of heavy noble metal nanoclusters around size 55 governed by relativistic effect and covalent bonding

Nanoclusters usually display exotic physical and chemical properties due to their intriguing geometric structures in contrast to their bulk counterparts. By means of first-principles calculations within density functional theory, we find that heavy noble metal Pt{sub N} nanoclusters around the size N = 55 begin to prefer an open configuration, rather than previously reported close-packed icosahedron or core-shell structures. Particularly, for Pt{sub N}, the widely supposed icosahedronal magic cluster is changed to a three-atomic-layered structure with D{sub 6h} symmetry, which can be well addressed by our recently established generalized Wulff construction principle (GWCP). However, the magic number of Pt{sub N} clusters around 55 is shifted to a new odd number of 57. The high symmetric three-layered Pt{sub 57} motif is mainly stabilized by the enhanced covalent bonding contributed by both spin-orbital coupling effect and the open d orbital (5d{sup 9}6s{sup 1}) of Pt, which result in a delicate balance between the enhanced Pt–Pt covalent bonding of the interlayers and negligible d dangling bonds on the cluster edges. These findings about Pt{sub N} clusters are also applicable to Ir{sub N} clusters, but qualitatively different from their earlier neighboring element Os and their later neighboring element Au. The magic numbers for Os and Au are even, being 56 and 58, respectively. The findings of the new odd magic number 57 are the important supplementary of the recently established GWCP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗