Search NASA⌕ Search

SEARCH · Search NASA

Results for “WELL LOGGING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Performance of Low-Density Parity-Check Coded Modulation

This paper reports the simulated performance of each of the nine accumulate-repeat-4-jagged-accumulate (AR4JA) low-density parity-check (LDPC) codes [3] when used in conjunction with binary phase-shift-keying (BPSK), quadrature PSK (QPSK), 8-PSK, 16-ary amplitude PSK (16- APSK), and 32-APSK.We also report the performance under various mappings of bits to modulation symbols, 16-APSK and 32-APSK ring scalings, log-likelihood ratio (LLR) approximations, and decoder variations. One of the simple and well-performing LLR approximations can be expressed in a general equation that applies to all of the modulation types.

Hamkins, Jon↗

Near-Infrared Spectroscopy of the Y0 WISEP J173835.52+273258.9 and the Y1 WISE J035000.32-565830.2: the Importance of Non-Equilibrium Chemistry

We present new near-infrared spectra, obtained at Gemini Observatory, for two Y dwarfs: WISE J035000.32−565830.2 (W0350) and WISEP J173835.52+273258.9 (W1738). A FLAMINGOS-2 R = 540 spectrum was obtained for W0350, covering 1.0 < λ micrometer < 1.7, and a cross-dispersed GNIRS R = 2800 spectrum was obtained for W1738, covering 0.993 - 1.087 micrometer, 1.191 - 1.305 micrometer, 1.589 - 1.631 micrometer, and 1.985 - 2.175 micrometer, in four orders. We also present revised Y JH photometry for W1738, using new NIRI Y and J imaging, and a re-analysis of the previously published NIRI H band images. We compare these data, together with previously published data for late-T and Y dwarfs, to cloud-free models of solar metallicity, calculated both in chemical equilibrium and with disequilibrium driven by vertical transport. We find that for the Y dwarfs the non-equilibrium models reproduce the near-infrared data better than the equilibrium models. The remaining discrepancies suggest that fine-tuning the CH4/CO and NH3/N2 balance is needed. Improved trigonometric parallaxes would improve the analysis. Despite the uncertainties and discrepancies, the models reproduce the observed near-infrared spectra well. We find that for the Y0, W1738, T(sub eff) = 425 +/- 25K and log g = 4.0 +/- 0.25, and for the Y1, W0350, T(sub eff) = 350 +/- 25K and log g = 4.0 +/- 0.25. W1738 may be metal-rich. Based on evolutionary models, these temperatures and gravities correspond to a mass range for both Y dwarfs of 3 - 9 Jupiter masses, with W0350 being a cooler, slightly older, version of W1738; the age of W0350 is 0.3 - 3 Gyr, and the age of W1738 is 0.15 - 1 Gyr.

two Y dwarfs↗

An Accelerated Recursive Doubling Algorithm for Block Tridiagonal Systems

Block tridiagonal systems of linear equations arise in a wide variety of scientific and engineering applications. Recursive doubling algorithm is a well-known prefix computation-based numerical algorithm that requires O(M^3(N/P + log P)) work to compute the solution of a block tridiagonal system with N block rows and block size M on P processors. In real-world applications, solutions of tridiagonal systems are most often sought with multiple, often hundreds and thousands, of different right hand sides but with the same tridiagonal matrix. Here, we show that a recursive doubling algorithm is sub-optimal when computing solutions of block tridiagonal systems with multiple right hand sides and present a novel algorithm, called the accelerated recursive doubling algorithm, that delivers O(R) improvement when solving block tridiagonal systems with R distinct right hand sides. Since R is typically about 100 1000, this improvement translates to very significant speedups in practice. Detailed complexity analyses of the new algorithm with empirical confirmation of runtime improvements are presented. To the best of our knowledge, this algorithm has not been reported before in the literature.

Seal, Sudip K↗

Application of the SEGUE Stellar Parameter Pipeline to LAMOST Stellar Spectra

We describe an application of the SEGUE Stellar Parameter Pipeline (SSPP) to medium-resolution stellar spectra obtained by the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST), in order to determine estimates of the stellar atmospheric parameters (T{sub eff}, log g, and [Fe/H]) and the abundance ratios ([α/Fe] and [C/Fe]). By performing a coordinate match with the LAMOST stellar database, we selected stars with LAMOST spectra in common with stars having available spectroscopy from the Apache Point Observatory Galactic Evolution Experiment (APOGEE), the RAdial Velocity Experiment (RAVE), and the Sloan Extension for Galactic Understanding and Exploration (SEGUE). We ran the selected LAMOST stellar spectra from each survey through SSPP, and compared the stellar parameters down to signal-to-noise ratio (S/N) of 10 and chemical abundances down to S/N = 20 derived by SSPP with those determined by the APOGEE, RAVE, and SEGUE software pipelines. Our results show that the derived stellar parameters generally agree quite well, even though there exist some small systematic offsets with small scatter in T{sub eff}, log g, and [Fe/H], due to the use of different temperature scales, abundance scales, and calibrations adopted by each survey. Comparison of the [α/Fe] determinations for LAMOST spectra suggests no sign of significant systematic offsets (<–0.04 dex), with a small scatter (<0.08 dex) relative to stars in common with APOGEE and SEGUE. The [C/Fe] estimates determined for the LAMOST spectra also exhibit good agreement, with a very small offset (∼0.01 dex) and scatter (∼0.12 dex) relative to the SEGUE stars, while there exists about a –0.19 dex offset, with a small scatter of ∼0.13 dex, for the APOGEE sample. Due to the existence of small offsets in the stellar parameters and abundances among difference data sets, optimal results when combining the different data sets will be obtained by removing the offsets. Once accomplished, the stellar parameters and chemical abundances estimated by SSPP from the LAMOST stellar spectra should provide a reliable database for studies of the Galactic disk and halo systems.

79 ASTRONOMY AND ASTROPHYSICS↗

CLASSY IV. Exploring UV Diagnostics of the Interstellar Medium in Local High- z Analogs at the Dawn of the JWST Era

The Cosmic Origins Spectrograph (COS) Legacy Archive Spectroscopic SurveY (CLASSY) provides the first high resolution spectral catalog of 45 local high-z analogs in the ultraviolet (UV; 1200–2000 Å) to investigate their stellar and gas properties. Here we present a toolkit of UV interstellar medium (ISM) diagnostics, analyzing the main emission lines of CLASSY spectra (N IV] λλ1483,87, C IV λλ1548,51, He IIλ1640, O III]λλ1661,6, Si III] λλ1883,92, C III] λ1907,9). Specifically, our aim is to provide accurate diagnostics for the reddening E(B - V), electron density n e , electron temperature T e , metallicity 12+log(O/H), and ionization parameter log(U), taking the different ISM ionization zones into account. We calibrate our UV toolkit using well-known optical diagnostics, analyzing archival optical spectra for all CLASSY targets. We find that UV density diagnostics estimate n e values that are ~1–2 dex higher (e.g., n e (C III] λλ1907,9) ~ 10 4 cm -3 ) than those inferred from their optical counterparts (e.g., n e ([S II]λλ6717,31) ~ 10 2 cm -3 ; n e ([Ar IV]λλ4714,41) ~ 10 3 cm -3 ). T e derived from the hybrid ratio [O III] λ1666/λ5007 proves to be reliable, implying differences in determining 12+log(O/H) compared to the optical counterpart O III] λ4363/[O III] λ5007 within ~ ±0.3 dex. We also investigate the relation between the stellar and gas E(B - V), finding consistent values at high specific star formation rates (sSFRs; log sSFR ≳ -8 yr -1 ), while at low sSFRs we confirmed an excess of dust attenuation in the gas. Finally, we investigate UV line ratios and equivalent widths to provide correlations with 12+log (O/H) and log(U), but note that there are degeneracies between the two. With this suite of UV-based diagnostics, we illustrate the pivotal role CLASSY plays in understanding the chemical and physical properties of high-z systems that JWST can observe in the rest-frame UV.

79 ASTRONOMY AND ASTROPHYSICS↗

Constraining the Stellar-to-Halo Mass Relation with Galaxy Clustering and Weak Lensing from DES Year 3 Data

We develop a framework to study the relation between the stellar mass of a galaxy and the total mass of its host dark matter halo using galaxy clustering and galaxy-galaxy lensing measurements. We model a wide range of scales, roughly from $\sim 100 \; {\rm kpc}$ to $\sim 100 \; {\rm Mpc}$, using a theoretical framework based on the Halo Occupation Distribution and data from Year 3 of the Dark Energy Survey (DES) dataset. The new advances of this work include: 1) the generation and validation of a new stellar mass-selected galaxy sample in the range of $\log M_\star/M_\odot \sim 9.6$ to $\sim 11.5$; 2) the joint-modeling framework of galaxy clustering and galaxy-galaxy lensing that is able to describe our stellar mass-selected sample deep into the 1-halo regime; and 3) stellar-to-halo mass relation (SHMR) constraints from this dataset. In general, our SHMR constraints agree well with existing literature with various weak lensing measurements. We constrain the free parameters in the SHMR functional form $\log M_\star (M_h) = \log(εM_1) + f\left[ \log\left( M_h / M_1 \right) \right] - f(0)$, with $f(x) \equiv -\log(10^{αx}+1) + δ[\log(1+\exp(x))]^γ/ [1+\exp(10^{-x})]$, to be $\log M_1 = 11.506^{+0.325}_{-0.404}$, $\log ε= -1.632^{+0.306}_{-0.181}$, $α= -1.638^{+0.108}_{-0.099}$, $γ= 0.596^{+0.251}_{-0.210}$ and $δ= 3.810^{+2.045}_{-1.811}$. The inferred average satellite fraction is within $\sim 5-35\%$ for our fiducial results and we do not see any clear trends with redshift or stellar mass. Furthermore, we find that the inferred average galaxy bias values follow the generally expected trends with stellar mass and redshift. Our study is the first SHMR in DES in this mass range, and we expect the stellar mass sample to be of general interest for other science cases.

Zacharegkas, G. [Argonne; Chicago U., KICP] (ORCID↗

Summary of the Science performed onboard the International Space Station during Increments 12 and 13

By September of 2007, continuous human presence on the International Space Station will reach a milestone of eighty months. The many astronauts and cosmonauts, who live onboard the station during the last fourteen Increments over that time span, spend their time building the station as well as performing science on a daily basis. Over those eighty months, the U.S astronauts crew members logged over 2954 hours of research time. Far more research time has been accumulated by experiments controlled by investigators on the ground. The U.S astronauts conducted over one hundred and twenty six (126) science investigations. From these hundred and twenty six science investigations, many were operated across multiple Increments. The crew also installed, activated and operated nine (9) science racks that supported six science disciplines ranging from material sciences to life science. By the end of Increment 14, a total of 5083 kg of research rack mass were ferried to the station as well as 5021 kg of research mass. The objectives of this paper are three-fold. (1) To briefly review the science conducted on the International Space Station during the previous eleven Increments; (2) to discuss in detail the science investigations that were conducted on the station during Increments 12 and 13. The discussion will focus mainly on the primary objectives of each investigation and their associated hypotheses that were investigated during these two Increments. Also, some preliminary science results will be discussed for each of the investigation as science results availability permit. (3) The paper will briefly touch on what the science complement planning was and what was actually accomplished due to real time science implementation and challenges during these two Increments in question to illustrate the challenges of daily science activity while the science platform is under construction. Finally, the paper will briefly discuss the science research complements for the other two Increments, Increments 14 and 15, to preview how much science might be accomplished during these two Increments.

Jules, Kenol↗

Generating log-normal mock catalog of galaxies in redshift space

We present a public code to generate a mock galaxy catalog in redshift space assuming a log-normal probability density function (PDF) of galaxy and matter density fields. We draw galaxies by Poisson-sampling the log-normal field, and calculate the velocity field from the linearised continuity equation of matter fields, assuming zero vorticity. This procedure yields a PDF of the pairwise velocity fields that is qualitatively similar to that of N-body simulations. We check fidelity of the catalog, showing that the measured two-point correlation function and power spectrum in real space agree with the input precisely. We find that a linear bias relation in the power spectrum does not guarantee a linear bias relation in the density contrasts, leading to a cross-correlation coefficient of matter and galaxies deviating from unity on small scales. We also find that linearising the Jacobian of the real-to-redshift space mapping provides a poor model for the two-point statistics in redshift space. That is, non-linear redshift-space distortion is dominated by non-linearity in the Jacobian. The power spectrum in redshift space shows a damping on small scales that is qualitatively similar to that of the well-known Fingers-of-God (FoG) effect due to random velocities, except that the log-normal mock does not include random velocities. This damping is a consequence of non-linearity in the Jacobian, and thus attributing the damping of the power spectrum solely to FoG, as commonly done in the literature, is misleading.

79 ASTRONOMY AND ASTROPHYSICS↗

WISE-CASING: Containment and Monitoring Institute (CaMI), Calgary, Canada FEM-DC Model

For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important to use the accurate position of the return electrode. We note that for the data fit the code also incorporated well casings for well INJ and the other observation well, either OB1 or OB2, in the calculation. In summary, we demonstrate here, for this particular case, that the DC results may be a reasonable approximation to the low frequency EM data collected at CaMI. If this approximation continues to hold, then the extreme computational efficiency offered by the hierarchical modeling used in the DC simulations will permit us to explore far more model complexity, especially the pervasive and troublesome data artifacts that arise when doing EM surveys in mature, culturally developed sites. In Brief, both the low frequency and DC simulation codes provided very consistent results that match the field data really well, indicating their capability to help monitoring borehole integrity with the low frequency EM method.

15 GEOTHERMAL ENERGY↗

Shallow EGS Regional Resource Potential and Map - Snake River Plain

SMU Geothermal Lab developed a methodology to estimate shallow (1 km to 4 km) Enhanced Geothermal Systems (EGS) resource potential using an approach that utilizes recent geology and geophysical research along with new well data to improve the thermal conductivity model, mitigate impacts from groundwater flow in the thermal model, and examine radioactivity data variations. By incorporating the results of the most recent projects with the SMU shallow methodology, we developed a more accurate, updated resource estimate for the Snake River Plain (SRP). The resulting maps and resource estimates can be used by the National Renewable Energy Lab (NREL), Bureau of Land Management (BLM), and the public to determine how best to move forward with future project development.

15 GEOTHERMAL ENERGY↗

Cosmological tests of the Hoyle-Narlikar conformal gravity

For the first time the Hoyle-Narlikar theory with creation of matter and a variable gravitational constant G, is subjected to the following cosmological tests: (1) the magnitude versus z relation, (2) the N(m) versus m relation for quasars, (3) the metric angular diameters versus z relation, (4) the isophotal angles versus z relation, (5) the log N-log S radio source count, and finally (6) the 3 K radiation. It is shown that the theory passes all these tests just as well as the standard cosmology, with the additional advantage that the geometry of the universe is uniquely determined, with a curvature parameter equal to zero. It is also interesting to note that the variability of G affects the log N-log S curve in a way similar to the density evolution introduced in standard cosmologies. The agreement with the data is therefore achieved without recourse to an ad hoc density evolution.

Canuto, V. M.↗

Project HOTSPOT: Mountain Home Well Core and Drill Site Photos

The Snake River Plain (SRP), Idaho, hosts potential geothermal resources due to elevated groundwater temperatures associated with the thermal anomaly Yellowstone-Snake River hotspot. Project HOTSPOT has coordinated international institutions and organizations to understand subsurface stratigraphy and assess geothermal potential. Over 5.9km of core were drilled from three boreholes within the SRP in an attempt to acquire continuous core documenting the volcanic and sedimentary record of the hotspot: (1) Kimama, (2) Kimberly, and (3) Mountain Home. The Mountain Home drill hole is located along the western plain and documents older basalts overlain by sediment. This submission includes photos of the core samples taken from the Mountain Home drill hole. Data submitted by project collaborator Doug Schmitt, University of Alberta *Note - The archive file "MH Photos.zip" contains all of the photos associated with this submission in a more easily downloaded format

15 GEOTHERMAL ENERGY↗

Complete Fiber/Copper Cable Solution for Long-Term Temperature and Pressure Measurement in Supercritical Reservoirs and EGS Wells

High Temperature insulated wire and optical fiber cable is a key enabling technology for the Geothermal Technologies Program (GTP). Without insulated electrical wires and optical fiber, downhole temperature and pressure sensors, flow meters and gauges cannot communicate with the surface. Unfortunately, there are currently no insulated electrical wire or fiber cable constructions capable of surviving for extended periods of deployment in a geothermal well (240-325°C) or supercritical (374°C) reservoir. This has severely hindered engineered reservoir creation, management and utilization, as hot zones and cool water intrusions cannot be understood over time. The lack of a insulated electrical wire and fiber cable solution is a fundamental limitation to the viability of this energy source. The High Temperature Downhole Tools target specification is development of tools and sensors for logging and monitoring wellbore conditions at depths of up to 10,000 meters and temperatures up to 374oC. It well recognized in the industry that no current electronic or fiber cable can be successfully deployed in a well and function successfully for more a few days at temperatures over 240oC. The goal of this project was to raise this performance level significantly. Prysmian Group’s objective in this project was to develop a complete, multi-purpose cable solution for long-term deployment in geothermal wells/reservoirs that can be used with the widest variety of sensors. In particular, the overall project objective was to produce a manufacturable cable design that can perform without serious degradation: • At temperatures up to 374°C; • At pressures up to 220 bar; • In a hydrogen-rich environment; and • For the life of the well (> 5 years). This cable incorporates: • Specialty optical fibers, with specific glass chemistry and high temperature and pressure protective coatings for data communication and distributed temperature and pressure sensing, and • High-temperature insulated wire conductors Prysmian Group has developed a geothermal fiber optic cable (GFOC) solution which incorporates novel glass chemistry for optical fibers to operate at the required bandwidths in high temperature/high pressure hydrogen rich environments with fiber protection, high temperature insulated conductors and protective cladding for cable components. The cable solution has been tested in a geothermal installation for 10 months. The electrical insulation and optical fibers have been validated through laboratory testing to ensure successful operation for greater than 5 years at 300°C, with the possibility of higher temperatures depending on the particular well environment. With the 300°C optical fiber and electrical insulation developments completed and validated in laboratory tests the greatest challenge to a complete 300°C cable solution was protecting the optical fibers in the cable. Optical fibers are typically incased in a protective tube where the tube is filled with a gel. The gel serves as mechanical protection, prevent moisture ingress, and can include hydrogen scavenging materials. A suitable gel for use at 300°C could not be identified and an industrialized alternative was not fully attained. Despite the problems encountered and the lower long-term operating temperature of the cable solution, the project showed success in developing a complete cable solution for a large portion of the geothermal wells in operation today. Further work to obtain the higher long-term temperature goal of the project can be achieved based on the knowledge gained in the current project. This project is significant for many reasons including the new materials science, manufacturing technology, energy independence, and jobs created and will create.

15 GEOTHERMAL ENERGY↗

Project HOTSPOT: Kimberly Well Core Photos

The Snake River Plain (SRP), Idaho, hosts potential geothermal resources due to elevated groundwater temperatures associated with the thermal anomaly Yellowstone-Snake River hotspot. Project HOTSPOT has coordinated international institutions and organizations to understand subsurface stratigraphy and assess geothermal potential. Over 5.9km of core were drilled from three boreholes within the SRP in an attempt to acquire continuous core documenting the volcanic and sedimentary record of the hotspot: (1) Kimama, (2) Kimberly, and (3) Mountain Home. The Kimberly drill hole was selected to document continuous volcanism when analysed in conjunction with the Kimama and is located near the margin of the plain. This submission includes photos of the core samples taken from the Kimberly drill hole. Data submitted by project collaborator Doug Schmitt, University of Alberta *Note - The archive file "Photos.zip" contains all of the photos associated with this submission in a more easily downloaded format

15 GEOTHERMAL ENERGY↗

Completion Report for Well ER-20-11, Corrective Action Units 101 and 102: Central and Western Pahute Mesa

Well ER-20-11 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Management Operations Underground Test Area (UGTA) Activity at the Nevada National Security Site (formerly Nevada Test Site), Nye County, Nevada. The well was drilled in September 2012 as part of the Central and Western Pahute Mesa Corrective Action Unit Phase II drilling program. Well ER-20-11 was constructed to further investigate the nature and extent of radionuclide-contaminated groundwater encountered in two nearby UGTA wells, to help define hydraulic and transport parameters for the contaminated Benham aquifer, and to provide data for the UGTA hydrostratigraphic framework model. The 44.5-centimeter (cm) surface hole was drilled to a depth of 520.0 meters (m) and cased with 34.0-cm casing to 511.5 m. The hole diameter was then decreased to 31.1 cm, and the borehole was drilled to a total depth of 915.6 m. The hole was completed to allow access for hydrologic testing and sampling in the target aquifer, which is a lava-flow aquifer known as the Benham aquifer. The completion casing string, set to the depth of 904.3 m, consists of a string of 6 5/8-inch (in.) stainless-steel casing hanging from a string of 7 5/8-in. carbon-steel casing. The stainless-steel casing has one slotted interval at 796.3 to 903.6 m. One piezometer string was installed, which consists of 2 7/8-in. stainless-steel tubing that hangs from 2 3/8-in. carbon-steel tubing via a crossover sub. This string was landed at 903.8 m and is slotted in the interval 795.3 to 903.1 m. Data collected during and shortly after hole construction include composite drill cuttings samples collected every 3.0 m, various geophysical logs, fluid samples (for groundwater chemistry analysis and tritium measurements), and water-level measurements. The well penetrated 915.6 m of Tertiary volcanic rock, including one saturated lava flow aquifer. Measurements on samples taken from the undeveloped well indicated elevated tritium levels within the Benham aquifer. The maximum tritium level measured with field equipment was 146,131 picocuries per liter from a sample obtained at the depth of 912.0 m. The fluid level was measured in the piezometer string at a depth of 504.5 m on September 26, 2012. All Fluid Management Plan (FMP) requirements for Well ER-20-11 were met. Analysis of monitoring samples and FMP confirmatory samples indicated that fluids generated during drilling at Well ER-20-11 met the FMP criteria for discharge to an unlined sump or designated infiltration area. Well development, hydrologic testing, and sampling will be conducted at a later date.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Project HOTSPOT: Kimama Well Core and Drill Site Photos

The Snake River Plain (SRP), Idaho, hosts potential geothermal resources due to elevated groundwater temperatures associated with the thermal anomaly Yellowstone-Snake River hotspot. Project HOTSPOT has coordinated international institutions and organizations to understand subsurface stratigraphy and assess geothermal potential. Over 5.9km of core were drilled from three boreholes within the SRP in an attempt to acquire continuous core documenting the volcanic and sedimentary record of the hotspot: (1) Kimama, (2) Kimberly, and (3) Mountain Home. The Kimama drill site was set up to acquire a continuous record of basaltic volcanism along the central volcanic axis and to test the extent of geothermal resources beneath the Snake River aquifer. This submission includes photos of the core samples taken from the Kimberly drill hole. Data submitted by project collaborator Doug Schmitt, University of Alberta *Note - The archive file "kimPhotos.zip" contains all of the photos associated with this submission in a more easily downloaded format

15 GEOTHERMAL ENERGY↗

Direct Breakthrough Curve Prediction From Statistics of Heterogeneous Conductivity Fields

In this paper, we present a methodology to predict the shape of solute breakthrough curves in heterogeneous aquifers at early times and/or under high degrees of heterogeneity, both cases in which the classical macrodispersion theory may not be applicable. The methodology relies on the observation that breakthrough curves in heterogeneous media are generally well described by lognormal distributions, and mean breakthrough times can be predicted analytically. The log-variance of solute arrival is thus sufficient to completely specify the breakthrough curves, and this is calibrated as a function of aquifer heterogeneity and dimensionless distance from a source plane by means of Monte Carlo analysis and statistical regression. Using the ensemble of simulated groundwater flow and solute transport realizations employed to calibrate the predictive regression, reliability estimates for the prediction are also developed. Additional theoretical contributions include heuristics for the time until an effective macrodispersion coefficient becomes applicable, and also an expression for its magnitude that applies in highly heterogeneous systems. Finally, it is seen that the results here represent a way to derive continuous time random walk transition distributions from physical considerations rather than from empirical field calibration.

58 GEOSCIENCES↗

From dynamical systems to renormalization

In this paper we study logarithmic derivatives associated to derivations on completed graded Lie algebra, as well as the existence of inverses. These logarithmic derivatives, when invertible, generalize the exp-log correspondence between a Lie algebra and its Lie group. Such correspondences occur naturally in the study of dynamical systems when dealing with the linearization of vector fields and the non linearizability of a resonant vector fields corresponds to the non invertibility of a logarithmic derivative and to the existence of normal forms. These concepts, stemming from the theory of dynamical systems, can be rephrased in the abstract setting of Lie algebra and the same difficulties as in perturbative quantum field theory (pQFT) arise here. Surprisingly, one can adopt the same ideas as in pQFT with fruitful results such as new constructions of normal forms with the help of the Birkhoff decomposition. The analogy goes even further (locality of counter terms, choice of a renormalization scheme) and shall lead to more interactions between dynamical systems and quantum field theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗