Search NASA⌕ Search

SEARCH · Search NASA

Results for “analytical method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Advanced Methods for Aircraft Engine Thrust and Noise Benefits: Nozzle-Inlet Flow Analysis

The research is focused on a wide regime of problems in the propulsion field as well as in experimental testing and theoretical and numerical simulation analyses for advanced aircraft and rocket engines. Results obtained are based on analytical methods, numerical simulations and experimental tests at the NASA LaRC and Hampton University computer complexes and experimental facilities. The main objective of this research is injection, mixing and combustion enhancement in propulsion systems. The sub-projects in the reporting period are: (A) Aero-performance and acoustics of Telescope-shaped designs. The work included a pylon set application for SCRAMJET. (B) An analysis of sharp-edged nozzle exit designs for effective fuel injection into the flow stream in air-breathing engines: triangular-round and diamond-round nozzles. (C) Measurement technique improvements for the HU Low Speed Wind Tunnel (HU LSWT) including an automatic data acquisition system and a two component (drag-lift) balance system. In addition, a course in the field of aerodynamics was developed for the teaching and training of HU students.

Morgan, Morris H.↗

Neutrino Oscillations in Supernovae

A (core-collapse) supernova is the final death call of a massive star during which a gigantic amount of a special kind of elementary particles known as neutrinos are released for a brief period of time. An earlier work by the PI and his collaborators has shown that the dense neutrino gas deep inside the supernova can experience "flavor transformation" or "oscillations" in a collective fashion, a macroscopic quantum phenomenon spanning over distances of 100-1000 kilometers. During this process neutrinos of different energies and propagation directions change their identities simultaneously. This phenomenon may be a key to understanding the mechanism of supernova explosion and the origin of many of the chemical elements found on the earth which were produced in the supernovae exploded in the past. The previous understanding of neutrino oscillations in supernovae was based on a stationary 3-dimensional model with 1 spatial dimension and 2 momentum dimensions. In this "neutrino bulb model" neutrinos are emitted from a spherically symmetric surface and they are decoupled from the motion of matter and the production of chemical elements. In order to accurately model the neutrino oscillations in supernovae and determine its physical consequences, sophisticated 7-dimensional (1 temporal dimension + 3 spatial dimensions + 3 momentum dimensions) modelling of neutrino transport must be performed self-consistently together with the hydrodynamic simulation of the flow of energy and matter inside the supernova and with the calculation of the production and destruction of chemical elements through a large nucleosynthesis network. Although it will be long journey to achieve the lofty goal, our project has made important progress in three different fronts towards this goal. In the first front we explored new computing hardware on which the next generation simulation codes may be run. We ported the neutrino bulb code to the platform of Graphics Processing Unit (GPU) and then later developed a new bulb code that can be run on supercomputers equipped with the Intel Xeon CPUs and/or the Xeon Phi coprocessors. In the second front we developed new algorithms that can be used towards computing neutrino oscillations in multi-dimensional models. We have developed a moment expansion method which is approximately 10 times more efficient than the old algorithm. We have also developed numerical codes to solve neutrino oscillations in toy models with two spatial dimensions. In the last front we used analytic methods to study neutrino oscillations in more sophisticated models, e.g. of multiple spatial dimensions and/or with time dependence. By analyzing the neutrino oscillations in toy models with two spacial dimensions we found that the approximate spacial translation symmetry, which is similar to the spherical symmetry in the neutrino bulb model, can be broken spontaneously as neutrino oscillations begin. By analyzing a time-dependent neutrino bulb model we found that certain modes of neutrino oscillations that are suppressed in the stationary model can become active in the time-dependent model. We have also developed theories which give insights to how ordinary matter may affect neutrino oscillations in supernovae and other astrophysical environments.

Duan, Huaiyu↗

Methods for analyzing hydrocarbons and hydrocarbon blends for chemical compositions

The present invention is generally related to the analysis of chemical compositions of hydrocarbons and hydrocarbon blends. This method, in particular embodiments, may apply specifically to the problem of analyzing extremely complex hydrocarbon-containing mixtures when the number and diversity of molecules makes it extremely difficult or impossible to realistically identify and quantify them individually in a reasonable timeframe. Particular SEC (size exclusion chromatography)-based methods and apparatus disclosed herein may be used to measure, e.g., the molecular size, weight, and/or volume, whether in absolute or relative manner, of the various components of eluate from the SEC stationary phase (e.g., a permeable gel). This analytical method is applicable on a wide variety of hydrocarbonaceous materials, and especially useful for, but not limited to oil, maltenes of oil, asphalt binders and asphalt binder blends, which may contain wide varieties of different types of additives, modifiers, and chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First Principles Nonadiabatic Excited-State Molecular Dynamics in NWChem

Computational simulation of non-adiabatic molecular dynamics is an indispensable tool for understanding complex photoinduced processes such as internal conversion, energy transfer, charge separation, and spatial localization of excitons, to name a few. Here, we report an implementation of the fewest-switches surface hopping algorithm in the NWChem computational chemistry program. Here the surface hopping method is combined with linear-response time-dependent density functional theory calculations of adiabatic excited state potential energy surfaces. To treat quantum transitions between arbitrary electronic Born{Oppenheimer states, we have implemented both numerical and analytical differentiation schemes for derivative non-adiabatic couplings. A numerical approach for the time-derivative non-adiabatic couplings together with an analytical method for calculating non-adiabatic coupling vectors is an efficient combination for surface hopping approaches. Additionally, electronic decoherence schemes and a state reassigned unavoided crossings algorithm are also implemented to improve the accuracy of the simulated dynamics and to handle trivial unavoided crossings. We apply our code to study the ultrafast decay of photoexcited benzene, including a detailed analysis of the potential energy surface, population decay time scales, and vibrational coordinates coupled to the excitation dynamics. The development presented in this work is a baseline for future implementations of more sophisticated frameworks for simulating of non-adiabatic molecular dynamics in NWChem.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SU-E-I-10: Investigation On Detectability of a Small Target for Different Slice Direction of a Volumetric Cone Beam CT Image

Purpose: To investigate the detectability of a small target for different slice direction of a volumetric cone beam CT image and its impact on dose reduction. Methods: Analytic projection data of a sphere object (1 mm diameter, 0.2/cm attenuation coefficient) were generated and reconstructed by FDK algorithm. In this work, we compared the detectability of the small target from four different backprojection Methods: hanning weighted ramp filter with linear interpolation (RECON 1), hanning weighted ramp filter with Fourier interpolation (RECON2), ramp filter with linear interpolation (RECON 3), and ramp filter with Fourier interpolation (RECON4), respectively. For noise simulation, 200 photons per measurement were used, and the noise only data were reconstructed using FDK algorithm. For each reconstructed volume, axial and coronal slice were extracted and detection-SNR was calculated using channelized Hotelling observer (CHO) with dense difference-of-Gaussian (D-DOG) channels. Results: Detection-SNR of coronal images varies for different backprojection methods, while axial images have a similar detection-SNR. Detection-SNR{sup 2} ratios of coronal and axial images in RECON1 and RECON2 are 1.33 and 1.15, implying that the coronal image has a better detectability than axial image. In other words, using coronal slices for the small target detection can reduce the patient dose about 33% and 15% compared to using axial slices in RECON 1 and RECON 2. Conclusion: In this work, we investigated slice direction dependent detectability of a volumetric cone beam CT image. RECON 1 and RECON 2 produced the highest detection-SNR, with better detectability in coronal slices. These results indicate that it is more beneficial to use coronal slice to improve detectability of a small target in a volumetric cone beam CT image. This research was supported by the MSIP (Ministry of Science, ICT and Future Planning), Korea, under the IT Consilience Creative Program (NIPA-2014-H0201-14-1002) supervised by the NIPA (National IT Industry Promotion Agency). Authors declares that s/he has no conflict of Interest in relation to the work in this abstract.

60 APPLIED LIFE SCIENCES↗

Experiments in anodic film effects during electrorefining of scrap U-10Mo fuels in support of modeling efforts

A monolithic uranium molybdenum alloy clad in zirconium has been proposed as a low enriched uranium (LEU) fuel option for research and test reactors, as part of the Reduced Enrichment for Research and Test Reactors program. Scrap from the fuel's manufacture will contain a significant portion of recoverable LEU. Pyroprocessing has been identified as an option to perform this recovery. A model of a pyroprocessing recovery procedure has been developed to assist in refining the LEU recovery process and designing the facility. Corrosion theory and a two mechanism transport model were implemented on a Mat-Lab platform to perform the modeling. In developing this model, improved anodic behavior prediction became necessary since a dense uranium-rich salt film was observed at the anode surface during electrorefining experiments. Experiments were conducted on uranium metal to determine the film's character and the conditions under which it forms. The electro-refiner salt used in all the experiments was eutectic LiCl/KCl containing UCl{sub 3}. The anodic film material was analyzed with ICP-OES to determine its composition. Both cyclic voltammetry and potentiodynamic scans were conducted at operating temperatures between 475 and 575 C. degrees to interrogate the electrochemical behavior of the uranium. The results show that an anodic film was produced on the uranium electrode. The film initially passivated the surface of the uranium on the working electrode. At high over potentials after a trans-passive region, the current observed was nearly equal to the current observed at the initial active level. Analytical results support the presence of K{sub 2}UCl{sub 6} at the uranium surface, within the error of the analytical method.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Model Based Approach to Extract Health Information from Textual Data

In current nuclear power plants (NPPs) a large amount of condition-based data is being generated and stored to assess and monitor component health and performance. The format of this data can be either numeric (e.g., pump vibration data) or textual (e.g., condition report which assess component health). While assessing component health from numeric data can be performed with a large variety of methods, the extraction of information from textual data still remains a challenge. Natural language processing (NLP) methods are starting to be deployed in current NPPs mainly to filter out incident reports (IRs) that are not safety related by employing supervised machine learning methods. However, these methods do not really provide the quantitative information that might be contained in IRs. This paper presents an approach to extract information from textual data (e.g., from IRs, maintenance reports) that is based on NLP data analytics methods coupled with model-based system engineer (MBSE) models. NLP methods are employed to perform syntactic and semantic analyses. Syntactic analysis analyzes the grammatical structure of a sentence; such analysis includes: part of speech (POS) tagging (i.e., identification of grammatic elements of each string - e.g., nouns, verbs), named entity recognition (i.e., identification of text entities - e.g., names, dates, events), and relation extraction (e.g., coreference resolution). On the other hand, semantic analysis is designed to analyze the logic structure of a sentence. Through a specific set of rules, our methods can identify whether a sentence contains health information of a component (e.g., degraded performance, anomaly behavior) or the causal relationship between two events (i.e., a cause-effect pair). An innovative element of our approach is that semantic analysis relies on MBSE models to identify links between textual elements. MBSE are diagrams designed to represent system and component dependencies (from both a form and functional point of view). In our approach, MBSE models emulate system engineer knowledge about component/system architecture. This paper presents in detail how the integration of NLP methods and MBSE models is performed. Few analysis examples focusing on centrifugal pumps are presented.

97 - MATHEMATICS AND COMPUTING↗

Sample Preparation Method for Low-Level Total 129 I Measurements by ICP-MS

Trace-level measurements of iodine’s isotopic ( 129 I and 127 I) and chemical species distributions are needed for an accurate understanding of radioiodine migration in the Hanford subsurface. Pacific Northwest National Laboratory (PNNL) previously developed a novel analytical method for iodine characterization that uses ion chromatography (IC) coupled to inductively coupled mass spectrometry (ICP-MS). While the method can measure speciated forms of 129 I at levels below the drinking water standard, an interference from molybdenum (Mo) prevents the assay from quantifying the $\underline{total}$ 129 I concentration in many Hanford sample matrices. In this work, solvent extraction was evaluated as a sample preparation method for eliminating the Mo interference. A series of 10 experiments was conducted in which solutions containing known amounts of iodate or iodide were treated by solvent extraction, and the extracted solutions were analyzed for total iodine concentrations by ICP MS. Several extraction parameters such as reagent concentrations and chemical reaction times were systematically adjusted in attempts to optimize the extraction process. While solvent extraction was shown to be effective at removing Mo, there was a consistent inability to recover more than approximately 75% of the total iodine in most experiments. This would reduce the ability to detect 129 I at levels near the drinking water standard. Additionally, the extraction efficiencies in several experiments were highly variable, suggesting that solvent extraction could add significant uncertainty to radioiodine measurements. We recommend evaluating ion exchange as an alternative sample preparation approach in fiscal year (FY) 2024.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Analytical estimation of emission zone mean position and width in organic light-emitting diodes from emission pattern image-source interference fringes

We present an analytical method for evaluating the first and second moments of the effective exciton spatial distribution in organic light-emitting diodes (OLED) from measured emission patterns. Specifically, the suggested algorithm estimates the emission zone mean position and width, respectively, from two distinct features of the pattern produced by interference between the emission sources and their images (induced by the reflective cathode): the angles in which interference extrema are observed, and the prominence of interference fringes. The relations between these parameters are derived rigorously for a general OLED structure, indicating that extrema angles are related to the mean position of the radiating excitons via Bragg's condition, and the spatial broadening is related to the attenuation of the image-source interference prominence due to an averaging effect. The method is applied successfully both on simulated emission patterns and on experimental data, exhibiting a very good agreement with the results obtained by numerical techniques. We investigate the method performance in detail, showing that it is capable of producing accurate estimations for a wide range of source-cathode separation distances, provided that the measured spectral interval is large enough; guidelines for achieving reliable evaluations are deduced from these results as well. As opposed to numerical fitting tools employed to perform similar tasks to date, our approximate method explicitly utilizes physical intuition and requires far less computational effort (no fitting is involved). Hence, applications that do not require highly resolved estimations, e.g., preliminary design and production-line verification, can benefit substantially from the analytical algorithm, when applicable. This introduces a novel set of efficient tools for OLED engineering, highly important in the view of the crucial role the exciton distribution plays in determining the device performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Multi-Tier Provenance Model for Global Climate Research

Global climate researchers rely upon many forms of sensor data and analytical methods to help profile subtle changes in climate conditions. The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) program provides researchers with curated products called Value Added Products (VAPs) resulting from continuous instrumentation streams, data fusion, and analytical profiling. To provide these projects the ARM operations and research teams rely upon a number of techniques to ensure strict quality control and quality assurance codes are maintained. End users in the climate research community are highly interested in obtaining as much causal evidence as possible and currently either not all the evidence are easily attainable or easily identifiable without significant effort. Our research interests are to identify a provenance model that serves both the producers and consumers of the VAP maintaining the quality assurance/quality control standards and tailored to meeting the individual researcher’s needs.

54 ENVIRONMENTAL SCIENCES↗

On the analytical modeling of the nonlinear vibrations of pretensioned space structures

Pretensioned structures are receiving considerable attention as candidate large space structures. A typical example is a hoop-column antenna. The large number of preloaded members requires efficient analytical methods for concept validation and design. Validation through analyses is especially important since ground testing may be limited due to gravity effects and structural size. The present investigation has the objective to present an examination of the analytical modeling of pretensioned members undergoing nonlinear vibrations. Two approximate nonlinear analysis are developed to model general structural arrangements which include beam-columns and pretensioned cables attached to a common nucleus, such as may occur at a joint of a pretensioned structure. Attention is given to structures undergoing nonlinear steady-state oscillations due to sinusoidal excitation forces. Three analyses, linear, quasi-linear, and nonlinear are conducted and applied to study the response of a relatively simple cable stiffened structure.

Housner, J. M.↗

Numerical solution of the Euler equations for high-speed, blended wing-body configurations

Simulation of high-speed three-dimensional flow about blended wing-body combinations is investigated. A finite-volume explicit scheme with Runge-Kutta time integration is used to solve the compressible Euler equations in order to simulate the flow. The method, augmented by carefully chosen dissipative terms and convergence accelerators such as enthalpy damping and maximum local time-stepping, has been found to be very efficient in solving high-speed flows involving strong shocks. An analytic method for generating the body geometry and an algebraic method for quasi-three-dimensional grid generation are described. Results are presented for various blended wing-body configurations at different Mach numbers and angles of attack.

Moitra, A.↗

Analytical Techniques for Retrieval of Atmospheric Composition with the Quadrupole Mass Spectrometer of the Sample Analysis at Mars Instrument Suite on Mars Science Laboratory

The Sample Analysis at Mars (SAM) instrument suite is the largest scientific payload on the Mars Science Laboratory (MSL) Curiosity rover, which landed in Mars׳ Gale Crater in August 2012. As a miniature geochemical laboratory, SAM is well-equipped to address multiple aspects of MSL׳s primary science goal, characterizing the potential past or present habitability of Gale Crater. Atmospheric measurements support this goal through compositional investigations relevant to martian climate evolution. SAM instruments include a quadrupole mass spectrometer, a tunable laser spectrometer, and a gas chromatograph that are used to analyze martian atmospheric gases as well as volatiles released by pyrolysis of solid surface materials (Mahaffy et al., 2012). This report presents analytical methods for retrieving the chemical and isotopic composition of Mars׳ atmosphere from measurements obtained with SAM׳s quadrupole mass spectrometer. It provides empirical calibration constants for computing volume mixing ratios of the most abundant atmospheric species and analytical functions to correct for instrument artifacts and to characterize measurement uncertainties. Finally, we discuss differences in volume mixing ratios of the martian atmosphere as determined by SAM (Mahaffy et al., 2013) and Viking (Owen et al., 1977, Oyama and Berdahl, 1977) from an analytical perspective. Although the focus of this paper is atmospheric observations, much of the material concerning corrections for instrumental effects also applies to reduction of data acquired with SAM from analysis of solid samples.

quadropole mass spectometer↗

Synthesis, characterization, and computational modeling of 6,6'-(((2-hydroxyethyl)azanediyl)bis(methylene))bis(2,4-di-tert-butylphenol) modified group 4 metal alkoxides

The coordination behavior of the tridentate alkoxy ligand 6,6'-(((2-hydroxyethyl)azanediyl)bis(methylene)) bis(2,4-di-tert-butylphenol) (termed H 3 -AM-DBP 2 ) with group 4 metal alkoxides ([M(OR) 4 ]) in a 1:1 ratio was previously found to generate [(ONep)Ti(κ 4 (O,O’,O”,N)-AM-DBP2)] and [(OR)Zr(κ 4 (μ-O,O’,O”,N)-AM-DBP 2 )] 2 (M = Zr, Hf). Additional studies revealed that increasing the stoichiometric ratio to 1:2 H3-AM-DBP 2 :[M(OR) 4 ] led to the isolation of [(ONep)Ti(κ 4 (μ-O,O’,O”,N)-AM-DBP2)(μ-ONep)Ti(ONep) 3 ] (1)•tol, [(OBu t)Zr(κ 4 (μ-O,O’,O”,N)-AM-DBP2)(μ-OBu t)Zr(OBu t )3] (2) and [(OBu t)Hf(κ 4 (μ-O,O’,O”,N)-AM-DBP2)(μ-OBu t )Hf(OBu t ) 3 ] (3). The asymmetric dinuclear complexes of 1-3 resemble the chelation of a [M(OR) 4 ] moiety to a “(OR)M(κ 4 (O,O’,O”,N)-AM-DBP 2 )” fragment. The metal complexed by the AM-DBP 2 ligand has a pseudo octahedral geometry while the other metal adopts an intermediate trigonal bipyramidal (TBP-5)/square base pyramidal (SBP-5) geometry for 1 but a distorted SBP-5 for both 2 and 3. The structure and properties of 1-3 were analyzed by computational modeling and fully characterized by standard analytical methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Targeted Metabolomics of the Phenylpropanoid Pathway in Arabidopsis thaliana using Reversed Phase Liquid Chromatography Coupled with Tandem Mass Spectrometry: Measuring Lignin Precursors by LC-MS

The phenylpropanoid pathway is a source of a diverse group of compounds derived from phenylalanine, many of which are involved in lignin biosynthesis and serve as precursors for the production of valuable compounds, such as coumarins, flavonoids, and lignans. Consequently, recent efforts have been invested in mechanistically understanding monolignol biosynthesis, making the quantification of these metabolites vital. To develop an improved and comprehensive analytical method for (i) extensively profiling, and (ii) accurately quantifiying intermediates of the monolignol biosynthetic network, using Arabidopsis thaliana as a model system. A liquid chromatography-tandem mass spectrometry with electrospray ionization was developed to quantify phenylpropanoid metabolites in Arabidopsis wildtype and cinnamoyl CoA reductase1 (CCR1) deficient lines (ccr1). Vortexing at high temperatures (65°C) enhanced release of phenylpropanoids, specifically the more hydrophobic compounds. A pH of 5.3 and ammonium acetate buffer concentration of 2.5 mM resulted in an optimal analyte response across standards. Ion suppression was estimated using standard spike recovery studies for accurate quantitation. The optimized method was used to profile Arabidopsis wildtype and ccr1 stems. An increase in hydroxycinnamic acid derivatives and a decrease in the hydroxycinnamyl aldehydes and alcohols in ccr1 lines, supports a shift of flux from lignin synthesis to other secondary metabolites and phenylpropanoid derivatives. Compared to existing targeted profiling techniques, our method is capable of quantifying a wider range of intermediates (15 out of 22 in WT Arabidopsis stems) at low in vivo concentrations (~50 pmol/g-FW for certain compounds), while requiring minimal sample preparation.

09 BIOMASS FUELS↗

Characterization of single-crystal sapphire substrates by X-ray methods and atomic force microscopy

The possibility of characterizing a number of practically important parameters of sapphire substrates by X-ray methods is substantiated. These parameters include wafer bending, traces of an incompletely removed damaged layer that formed as a result of mechanical treatment (scratches and marks), surface roughness, damaged layer thickness, and the specific features of the substrate real structure. The features of the real structure of single-crystal sapphire substrates were investigated by nondestructive methods of double-crystal X-ray diffraction and plane-wave X-ray topography. The surface relief of the substrates was investigated by atomic force microscopy and X-ray scattering. The use of supplementing analytical methods yields the most complete information about the structural inhomogeneities and state of crystal surface, which is extremely important for optimizing the technology of substrate preparation for epitaxy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Technology recommendations for pre-screening of IAEA swipe samples

Argonne and Oak Ridge National Laboratories have prepared an analysis of recommended, possible, and not recommended technologies for pre-screening and prioritizing IAEA swipes. The analytical techniques listed under the recommended technology list are the most promising techniques available to date. The recommended list is divided into two sections: Argonne’s recommended techniques and Oak Ridge’s recommended techniques. This list was divided based upon the expertise of staff in each subject area and/or the instrumentation available at each laboratory. The following section, titled Possible Techniques, is a list of analytical techniques that could be used for pre-screening and prioritizing swipes if additional instrumentation and effort were provided. These techniques are not necessarily top priority, but should not be discounted for future or expanded efforts. Lastly, a list of not recommended techniques is provided to outline the analytical methods and instrumentation that were investigated by each lab but deemed not suitable for this task. In addition to the recommendation list, a short procedure is provided outlining the steps followed for destructive analysis by the Network of Analytical Laboratories (NWAL) for determination of uranium concentrations, isotopic content of sample and swipe. Swipes generated for this project will be given to ORNL’s NWAL laboratory for analysis after analysis by other techniques at both laboratories.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Online monitoring of solutions within microfluidic chips: simultaneous Raman and UV-Vis absorption spectroscopies

Microfluidics is an appealing analytical tool in the global effort to close the nuclear fuel cycle. Using a microfluidic chip permits analysis of greatly reduced sample volumes compared to what is necessary for traditional analytical methods. There is a commensurate reduction in disposal volume and cost. Development of spectroscopic methods practicable on the microscale are necessary to take advantage of the microchip configuration. This study uses simultaneously applied UV-vis and micro-Raman spectroscopies adapted to function on the microscale to analyze in situ both the Nd3+ (UV-vis active) and HNO3 (Raman active) concentrations in the same sample. An adjustable translation platform was designed to hold the micro-Raman probe above and perpendicular to the chip face, and the UV-vis probe in the plane of the chip. These complimentary spectral techniques when processed through multivariate PLS (Partial Least Squares) models gave an accurate picture of the widely varying solution concentrations as a function of time for each solution component. Solution matrix effects can drastically alter analyte signatures as measured by both UV-vis absorbance and Raman spectroscopy. PLS methods successfully modeled these spectral changes and accurately measured concentrations of components of interest within the microfluidic chip.

on-line monitoring, microfluidics, Raman, UV-vis↗