Search NASA⌕ Search

SEARCH · Search NASA

Results for “analyzable function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

The study of electrical conduction mechanisms

The dielectric response of lunar fines 74241,2 is presented in the audio-frequency range and under lunarlike conditions. Results suggest that volatiles are released during storage and transport of the lunar sample. Apparently, subsequent absorption of volatiles on the sample surface alter its dielectric response. The assumed volatile influence disappear after evacuation. A comparison of the dielectric properties of lunar and terrestrial materials as a function of density, temperature, and frequency indicates that if the lunar simulator analyzed were completely devoid of atmospheric moisture it would present dielectric losses smaller than those of the lunar sample. It is concluded that density prevails over temperature as the controlling factor of dielectric permittivity in the lunar regolith and that dielectric losses vary slowly with depth.

Morrison, H. F.↗
NASA NTRS1975

Steady and Oscillatory, Subsonic and Supersonic, Aerodynamic Pressure and Generalized Forces for Complex Aircraft Configurations and Applications to Flutter

A general method for analyzing aerodynamic flows around complex configurations is presented. By applying the Green function method, a linear integral equation relating the unknown, small perturbation potential on the surface of the body, to the known downwash is obtained. The surfaces of the aircraft, wake and diaphragm (if necessary) are divided into small quadrilateral elements which are approximated with hyperboloidal surfaces. The potential and its normal derivative are assumed to be constant within each element. This yields a set of linear algebraic equations and the coefficients are evaluated analytically. By using Gaussian elimination method, equations are solved for the potentials at the centroids of elements. The pressure coefficient is evaluated by the finite different method; the lift and moment coefficients are evaluated by numerical integration. Numerical results are presented, and applications to flutter are also included.

Chen, L. T.↗
NASA NTRS1974

Dielectric comparison of lunar and terrestrial fines at lunar conditions

The dielectric properties of lunar fines 74241,2 in the audio-frequency range under lunarlike conditions are presented. Results suggest that volatiles are released during storage and transport of the lunar sample. Apparently, subsequent adsorption of volatiles on the sample surface alters its dielectric response. The assumed volatile influence disappears after evacuation. A comparison of the dielectric properties of lunar and terrestrial materials as a function of density, temperature, and frequency indicates that if the terrestrial sample analyzed were completely devoid of atmospheric moisture, it would present dielectric losses smaller than those of the lunar sample. It is concluded that density prevails over temperature as the controlling factor of dielectric permittivity in the lunar regolith and that dielectric losses vary slowly with depth.

Alvarez, R.↗
NASA NTRS1977

Tornado detection data reduction and analysis

Data processing and analysis was provided in support of tornado detection by analysis of radio frequency interference in various frequency bands. Sea state determination data from short pulse radar measurements were also processed and analyzed. A backscatter simulation was implemented to predict radar performance as a function of wind velocity. Computer programs were developed for the various data processing and analysis goals of the effort.

Davisson, L. D.↗
NASA NTRS1977

The decompression of cold neutron star matter

The ejection of cold neutron-star matter is examined, and an attempt is made to determine whether the final composition of this matter may be similar to that normally associated with the hot high-neutron-flux r-process. A semiempirical liquid-drop model is used for the nucleus, and the equilibrium composition of the matter is determined by assuming it to be in its absolute ground state at a given density. Physical mechanisms operating during the expansion are analyzed, and the composition of the ejected matter is found as a function of its density during expansion. The results indicate that it is virtually impossible for deuterium to form, that neutrons can be captured only after beta decay increases the atomic numbers of nuclei, and that no free neutrons can escape. It is concluded that neutron-star ejecta can produce heavy neutron-rich nuclei and may produce somewhat heavier nuclei than a standard r-process.

Lattimer, J. M.↗
NASA NTRS1977

The application of integral performance criteria to the analysis of discrete maneuvers in a driving simulator

The influence of vehicle transient response characteristics on driver-vehicle performance in discrete maneuvers as measured by integral performance criteria was investigated. A group of eight ordinary drivers was presented with a series of eight vehicle transfer function configurations in a driving simulator. Performance in two discrete maneuvers was analyzed by means of integral performance criteria. Results are presented.

Repa, B. S.↗
NASA NTRS1979

Capacitance transients in p-type GaAs MOS structures and application to lifetime mapping during solar cell fabrication

Fabrication on p-type GaAs of MOS structures in which the quality of the oxide is such that the surface can be driven into deep inversion by a voltage pulse is reported. The capacitance transients in such MOS capacitors as a function of step amplitude and temperature were measured and the transients were analyzed by an extension of a method for silicon. The oxides were produced by plasma oxidation on an LPE-grown p-type GaAs specimen with N sub A of 3x10 to the 17th power/cu cm. The capacitors were produced by depositing 50 microns-diameter gold dots over the native oxide and, therefore, the lifetime is localized to the area under the dot. The method permits extraction of both the bulk lifetime and the interface recombination velocity. These parameters on samples with different N sub A were measured and a correlation between tau sub g and N sub A was found.

Vitale, G.↗
NASA NTRS1982

An Assessment of Alternate Thermal Protection Systems for the Space Shuttle Orbiter: Executive Summary - Volume 1

Alternate thermal protection system (TPS) concepts to the Space Shuttle Orbiter were assessed. Metallic, ablator, and carbon-carbon concepts which are the result of some previous design, manufacturing and testing effort were considered. Emphasis was placed on improved TPS durability, which could potentially reduce life cycle costs and improve Orbiter operational characteristics. Integrated concept/orbiter point designs were generated and analyzed on the basis of Shuttle design environments and criteria. A merit function evaluation methodology based on mission impact, life cycle costs, and risk was developed to compare the candidate concepts and to identify the best alternate. Voids and deficiencies in the technology were identified, along with recommended activities to overcome them. Finally, programmatic plans, including ROM costs and schedules, were developed for all activities required to bring the selected alternate system up to operational readiness.

Hays, D.↗
NASA NTRS1981

Acceleration of electrons by interplanetary shocks

Ion acceleration is a well known phenomenon at both interplanetary shocks, while there have been only a few reports concerning an acceleration of electrons at interplanetary shocks. The considered investigation reports that electron acceleration occurs at many shocks. The instrumentation used is discussed, taking into account the ISEE 3 (International Sun Earth Explorer) spacecraft and the electrostatic analyzer employed for the measurement of electrons. Changes in the electron distribution function caused by shocks are found to be quite varied. Some events show a simple step to a higher flux level, some show fluctuations as the flux rises, and some have one or more pulses at the time of the shock. Attention is given to data obtained on July 26, 1979, December 25, 1978, and November 12, 1978. A calculation of shock geometries is also reported.

Potter, D. W.↗
NASA NTRS1982

Mg/+/ morphology from visual airglow experiment observations

Observations of low-latitude Mg(+) by the Visual Airglow Experiment on Atmosphere Explorer E were analyzed by a two-dimensional inversion technique. Number density profiles as functions of geographic position were obtained in the F2 region. The profiles represent daytime northern winter, solar maximum conditions and reveal frequent occurrences of large number densities (50-100 per cu cm) at altitudes up to 475 km. Maximum densities are usually found near the equator at 1200-1400 LT. The equatorial density then decreases as the peak concentrations shift to higher latitudes. Longitudinal differences in the time development of the metal ion density appear in the afternoon. These seem to be due to the increasing importance of zonal winds and/or to longitudinal differences in the vertical ion drift velocity.

Fesen, C. G.↗
NASA NTRS1983

Analysis and retracking of continental ice sheet radar altimeter waveforms

The Seasat-1 radar altimeter data set acquired over both the Antarctic and Greenland continental ice sheets is analyzed to obtain corrected ranges to the ice surface. The radar altimeter functional response over the continental ice sheets is considerably more complex than over the oceans. Causal factors identified in this complicated response include sloping surfaces, undulating ice surfaces with characteristic wavelengths on the same spatial scale as the altimeter beam-limited footprint, off-track reflections, and dynamic lag of the altimeter tracking circuit. Retracking methods using the altimeter return pulse waveforms give range corrections that are typically several meters. The entire set of Seasat-1 altimetry over the continental ice sheets is being retracked by fitting a multi-parameter function to each waveform. Many waveforms have double ramps indicating near-normal reflections from two distinct portions of the ice surface within the altimeter beam. Two independent range measurements differing by less than 25 m are obtained from retracking the double-ramp waveforms.

Martin, T. V.↗
NASA NTRS1983

Determination of aerodynamic parameters of a fighter airplane from flight data at high angles of attack

A procedure for the estimation of airplane model structure and parameters is applied to data from a modern fighter airplane operating within an angle of attack range of 5 to 60 deg. The paper briefly describes the airplane, flight and wind tunnel data available, and the estimation method. The results presented contain basic longitudinal characteristics of the airplane and the estimates of aerodynamic parameters in the yawing-moment equations. These estimates are obtained from small and large amplitude maneuvers. Because the latter set of data was not suitable for airplane identification, some of the large amplitude maneuvers were joined together and then partitioned into subsets according to the values of angle of attack. Each subset was then analyzed as a separate data set. Most of the estimated parameters and functions are in good agreement with the wind tunnel measurements. The estimated lateral parameters in the model equations also demonstrate good prediction capabilities.

Klein, V.↗
NASA NTRS1984

Preliminary results of albedo correlation between Europa and Ganymede

Building on the work of Johnson et al (1982) on the multispectral properties of the icy Galilean satellites, Voyager images of Europa and Ganymede were analyzed to determine values for the exponent k of the Minnaert photometric function and preliminary spectra for various regions on the two satellites. The study showed that the k values for the Minnaert function for Ganymede and Europa are different and thus that the photometric behavior of the two bodies is different. This lends evidence to the idea that the physical nature of the surfaces of Ganymede and Europa are dissimilar. It should be noted that the many factors such as texture and roughness, not taken into account in the Minnaert equation, have an effect on the photometric function. Thus, while the spectra do not rule out similar materials occurring on Europa and Ganymede, they do not contribute any evidence to that possibility.

Yuter, S. E.↗
NASA NTRS1986

An analysis of ullage heat transfer in the orbital refueling system

The Orbital Refueling System was an experiment flown on Shuttle Mission STS 41-G in October, 1984. Liquid hydrazine fuel was transferred back and forth from one spherical bladder tank to another using pressurized nitrogen as the driving force. Compressive heating of the ullage gas in the receiving tank could lead to a hazardous situation if any hydrazine leaked through to the ullage side of the bladder and was heated above about 175 F, where it can undergo spontaneous exothermic decomposition. Early analysis of the flight data indicated that the ullage compression process was much closer to an isothermal than an adiabatic one. In this study, a thorough review of the pertinent literature was used to make an a priori best-estimate for the ullage gas heat transfer coefficient (defining the Nusselt Number as a function of Reynolds and Rayleigh Numbers). Experimental data from the flight were analyzed in detail. It is evident that there is considerably more heat transfer than can be accounted for by conduction alone, but the observed increases do not correlate well with Reynolds Number, Rayleigh Number or vehicle acceleration. There are large gaps in the present understanding of convective heat transfer in closed containers with internal heat generation, especially in the presence of vibrations or other random disturbances. A program of experiments to fill in these gaps is suggested, covering both ground and orbital environments.

Kauffman, D.↗
NASA NTRS1986

On statistical searches for filaments

The presence or absence of an excess of filamentary structure in the galaxy distribution has important implications for the origin of such structure. In an attempt to answer this question, many statistics have been devised to quantify the visual impression of filaments seen in galaxy maps, but few of these are at all well understood. Two of these, a quadrupole elongation statistic and a nearest-neighbor alignment statistic, are analyzed in the common language of the irreducible N-point correlation functions of the galaxy distribution, and it is argued that there has as yet been no success in isolating filaments in particular from clustering in general.

Fry, J. N.↗
NASA NTRS1987

Analysis of a parallelized nonlinear elliptic boundary value problem solver with application to reacting flows

A parallelized finite difference code based on the Newton method for systems of nonlinear elliptic boundary value problems in two dimensions is analyzed in terms of computational complexity and parallel efficiency. An approximate cost function depending on 15 dimensionless parameters is derived for algorithms based on stripwise and boxwise decompositions of the domain and a one-to-one assignment of the strip or box subdomains to processors. The sensitivity of the cost functions to the parameters is explored in regions of parameter space corresponding to model small-order systems with inexpensive function evaluations and also a coupled system of nineteen equations with very expensive function evaluations. The algorithm was implemented on the Intel Hypercube, and some experimental results for the model problems with stripwise decompositions are presented and compared with the theory. In the context of computational combustion problems, multiprocessors of either message-passing or shared-memory type may be employed with stripwise decompositions to realize speedup of O(n), where n is mesh resolution in one direction, for reasonable n.

Keyes, David E.↗
NASA NTRS1986

Characteristics of electromagnetic interference generated by arc discharges

Electromagnetic interference (EMI) signatures resulting from arc discharges are characterized, and the effects of electrostatic discharges (ESDs) on the design of spacecraft systems are investigated. EMI characterization experiments were performed on Mylar, Teflon, Kapton, fused silica, and fiberglass in a vacuum chamber with acrylic walls; the experimental design and procedures are described. Discharge current pulses and RF spectra generated by the sample materials are examined. The relation between the magnitude of EMI generated during an ESD event and the material, environment, and geometry is studied. The solar-array/plasma interaction is analyzed; particular attention is given to the rate of discharge as a function of plasma density. The physical mechanisms of ESD-generated EMI are discussed. The data reveal that ESD parameters are dependent on the test environment.

Leung, Philip↗
NASA NTRS1987

Using frequency-domain methods to identify XV-15 aeroelastic modes

The XV-15 Tilt-Rotor wing has six major aeroelastic modes that are close in frequency. To precisely excite individual modes during flight test, dual flaperon exciters with automatic frequency-sweep controls were installed. The resulting structural data were analyzed in the frequency domain (Fourier transformed) with cross spectral and transfer function methods. Modal frequencies and damping were determined by performing curve fits to transfer function magnitude and phase data and to cross spectral magnitude data. Results are given for the XV-15 with its original metal rotor blades. Frequency and damping values are also compared with earlier predictions.

Acree, C. W., Jr.↗