Search NASA⌕ Search

SEARCH · Search NASA

Results for “angle diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Recombination activity of grain boundaries in high-performance multicrystalline Si during solar cell processing

Here in this work, we applied internal quantum efficiency mapping to study the recombination activity of grain boundaries in High Performance Multicrystalline Silicon under different processing conditions. Wafers were divided into groups and underwent different thermal processing, consisting of phosphorus diffusion gettering and surface passivation with hydrogen rich layers. After these thermal treatments, wafers were processed into heterojunction with intrinsic thin layer solar cells. Light Beam Induced Current and Electron Backscatter Diffraction were applied to analyse the influence of thermal treatment during standard solar cell processing on different types of grain boundaries. The results show that after cell processing, most random-angle grain boundaries in the material are well passivated, but small-angle grain boundaries are not well passivated. Special cases of coincidence site lattice grain boundaries with high recombination activity are also found. Based on micro-X-ray fluorescence measurements, a change in the contamination level is suggested as the reason behind their increased activity. Published by AIP Publishing.

36 MATERIALS SCIENCE↗

From embryos to precipitates: a study of nucleation and growth in a multicomponent ferritic steel

The nucleation and growth of nanoscale precipitates in a new class of high-strength, multicomponent, ferritic steels has been studied with complementary state-of-the-art microstructural characterization techniques of atom probe tomography for individual embryos and precipitates and small-angle neutron scattering for their statistical averages. Both techniques revealed a bimodal size distribution, with subnanometer embryos, and nanoscale precipitates. The embryos, which have a radius of {approx}0.4 nm, are enriched in Cu and served as preferential sites for nucleation. The critical radius for nucleation was determined to be {approx}0.7 nm. Subsequent growth of the precipitates is dictated by volumetric diffusion, as predicted by the Lifshitz-Slyozov-Wagner theory.

36 MATERIALS SCIENCE↗

Study of Kinetics of Solid Phase Transition in Tetracosane С{sub 24}Н{sub 50} by High-Resolution Synchrotron X-Ray Powder Diffraction

Using the small-angle synchrotron X-ray diffraction method at the research facility “BELOK” of the Kurchatov synchrotron radiation source at the NRC Kurchatov Institute, it was shown that the first-order solid phase transition in tetracosane C{sub 24}H{sub 50} passes according to a heterogeneous mechanism in a narrow temperature range ΔT ~ 1 K in accordance with the theory of diffuse phase transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of H I clouds in shock-compressed interstellar medium: physical origin of angular correlation between filamentary structure and magnetic field

Recent observations of the neutral Galactic interstellar medium showed that filamentary structures of H i clouds are aligned with the interstellar magnetic field. Many interesting applications are proposed based on the alignment, such as measurement of magnetic field strength through the Chandrasekhar–Fermi method and removal of foreground dust emissions for the detection of inflationary polarized emission in the cosmic microwave background radiation. However, the physical origin of the alignment remains to be explained. To understand the mechanism, we examine the formation of H i clouds triggered by shock compression of the diffuse warm neutral medium using three-dimensional magnetohydrodynamic simulations. We show that the shock-compressed medium of density n∼1 cm{sup −3} evolves into H i clouds with n∼50 cm{sup −3} via thermal instability consistent with previous studies. We apply a machine vision transformation developed by Clark et al. to the simulated column density structures to measure angle correlation between filamentary structures of H i clouds and magnetic field. We find that the orientation of H i filaments depends on the environmental turbulent velocity field, particularly on the strength of shear strain in the direction of the magnetic field, which is controlled by the angle between the shock propagation direction and upstream magnetic field. When the strain along the magnetic field is weak, filamentary components of H i clouds lie perpendicular to the magnetic field. However, the filaments have come to align with the magnetic field, if we enhance the turbulent strain along the magnetic field or if we set turbulence in the preshock medium.

79 ASTRONOMY AND ASTROPHYSICS↗

Heteroepitaxial film silicon solar cell grown on Ni-W foils

Today, silicon-wafer-based technology dominates the photovoltaic (PV) industry because it enables high efficiency, is produced from abundant, non-toxic materials and is proven in the PV marketplace.[1] However, costs associated with the wafer itself limit ultimate cost reductions.[1,2] PV based on absorber layers of crystalline Si with only 2 to 10 m thickness are a promising route to reduce these costs, while maintaining efficiencies above 15%.[3-5] With the goal of fabricating low-cost film crystalline Si (c-Si), recent research has explored wafer peeling,[6,7] crystallization of amorphous silicon films on glass,[4,8-10] and seed and epitaxy approaches.[3,5,11] In this third approach, one initially forms a seed layer that establishes the grain size and crystalline order. The Si layer is then grown heteroepitaxially on the seed layer, so that it replicates the seed crystal structure. In all of these film c-Si approaches, the critical challenge is to grow c-Si with adequate material quality: specifically, the diffusion length (LD) must be at least three times the film thickness.[12] In polycrystalline Si films, grain boundaries (GBs) are recombination-active and significantly reduce LD. This adverse effects of GBs motivates research into growth of large grained c-Si [13,14] (for a low density of GBs) and biaxially-textured c-Si [11] (for low-angle GBs).

Wee, Sung Hun↗

Local Structural Investigations, Defect Formation, and Ionic Conductivity of the Lithium Ionic Conductor Li 4 P 2 S 6

Glassy, glass–ceramic, and crystalline lithium thiophosphates have attracted interest in their use as solid electrolytes in all-solid-state batteries. Despite similar structural motifs, including PS 4 3– , P 2 S 6 4– , and P 2 S 7 4– polyhedra, these materials exhibit a wide range of possible compositions, crystal structures, and ionic conductivities. Here, we present a combined approach of Bragg diffraction, pair distribution function analysis, Raman spectroscopy, and 31 P magic angle spinning nuclear magnetic resonance spectroscopy to study the underlying crystal structure of Li 4 P 2 S 6 . In this work, we show that the material crystallizes in a planar structural arrangement as a glass ceramic composite, explaining the observed relatively low ionic conductivity, depending on the fraction of glass content. Calculations based on density functional theory provide an understanding of occurring diffusion pathways and ionic conductivity of this Li + ionic conductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gas phase synthesis of non-bundled, small diameter single-walled carbon nanotubes with near-armchair chiralities

We present a floating catalyst synthesis route for individual, i.e., non-bundled, small diameter single-walled carbon nanotubes (SWCNTs) with a narrow chiral angle distribution peaking at high chiralities near the armchair species. An ex situ spark discharge generator was used to form iron particles with geometric number mean diameters of 3–4 nm and fed into a laminar flow chemical vapour deposition reactor for the continuous synthesis of long and high-quality SWCNTs from ambient pressure carbon monoxide. The intensity ratio of G/D peaks in Raman spectra up to 48 and mean tube lengths up to 4 μm were observed. The chiral distributions, as directly determined by electron diffraction in the transmission electron microscope, clustered around the (n,m) indices (7,6), (8,6), (8,7), and (9,6), with up to 70% of tubes having chiral angles over 20°. The mean diameter of SWCNTs was reduced from 1.10 to 1.04 nm by decreasing the growth temperature from 880 to 750 °C, which simultaneously increased the fraction of semiconducting tubes from 67% to 80%. Limiting the nanotube gas phase number concentration to ∼10{sup 5 }cm{sup −3} prevented nanotube bundle formation that is due to collisions induced by Brownian diffusion. Up to 80% of 500 as-deposited tubes observed by atomic force and transmission electron microscopy were individual. Transparent conducting films deposited from these SWCNTs exhibited record low sheet resistances of 63 Ω/□ at 90% transparency for 550 nm light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PARTICLE ENERGY SPECTRA AT TRAVELING INTERPLANETARY SHOCK WAVES

We have searched for evidence of significant shock acceleration of He ions of {approx}1-10 MeV amu{sup -1} in situ at 258 interplanetary traveling shock waves observed by the Wind spacecraft. We find that the probability of observing significant acceleration, and the particle intensity observed, depends strongly upon the shock speed and less strongly upon the shock compression ratio. For most of the 39 fast shocks with significant acceleration, the observed spectral index agrees with either that calculated from the shock compression ratio or with the spectral index of the upstream background, when the latter spectrum is harder, as expected from diffusive shock theory. In many events the spectra are observed to roll downward at higher energies, as expected from Ellison-Ramaty and from Lee shock-acceleration theories. The dearth of acceleration at {approx}85% of the shocks is explained by (1) a low shock speed, (2) a low shock compression ratio, and (3) a low value of the shock-normal angle with the magnetic field, which may cause the energy spectra that roll downward at energies below our observational threshold. Quasi-parallel shock waves are rarely able to produce measurable acceleration at 1 AU. The dependence of intensity on shock speed, seen here at local shocks, mirrors the dependence found previously for the peak intensities in large solar energetic-particle events upon speeds of the associated coronal mass ejections which drive the shocks.

79 ASTRONOMY AND ASTROPHYSICS↗

Designing High-Efficiency Thin Silicon Solar Cells Using Parabolic-Pore Photonic Crystals

We demonstrate the efficacy of wave-interference-based light trapping and carrier transport in parabolic-pore photonic-crystal, thin-crystalline silicon (c -Si) solar cells to achieve above 29% power conversion efficiencies. Using a rigorous solution of Maxwell’s equations through a standard finite-difference time domain scheme, we optimize the design of the vertical-parabolic-pore photonic crystal (PhC) on a 10 μm -thick (c -Si) solar cell to obtain a maximum achievable photocurrent density (MAPD) of 40.6 mA/cm 2 beyond the ray-optical, Lambertian light-trapping limit. For a slanted-parabolic-pore PhC that breaks x-y symmetry, improved light trapping occurs due to better coupling into parallel-to-interface refraction modes. We achieve the optimum MAPD of 41.6 mA/cm 2 for a tilt angle of 10° with respect to the vertical axis of the pores. This MAPD is further improved to 41.72 mA/cm 2 by introducing a 75-nm SiO 2 antireflective coating on top of the solar cell. We use this MAPD and the associated charge-carrier generation profile as input for a numerical solution of Poisson’s equation coupled with semiconductor drift-diffusion equations using a Shockley-Read-Hall and Auger recombination model. Using experimentally achieved surface recombination velocities of 10 cm/s, we identify semiconductor doping profiles that yield power conversion efficiencies over 29%. Practical considerations of additional upper-contact losses suggest efficiencies close to 28%. This improvement beyond the current world record is largely due to an open-circuit voltage approaching 0.8 V enabled by reduced bulk recombination in our thin silicon architecture while maintaining a high short-circuit current through wave-interference-based light trapping.

14 SOLAR ENERGY↗

3D Magnetohydrodynamic Models of Nonthermal Photon Emission in the Binary System γ{sup 2} Velorum

Recent reports claiming an association of the massive star binary system γ{sup 2} Velorum (WR 11) with a high-energy γ-ray source observed by Fermi-LAT contrast the so far exclusive role of η Carinae as the hitherto only detected γ-ray emitter in the source class of particle-accelerating colliding-wind binary (CWB) systems. We offer support to this claim of association by providing dedicated model predictions for the nonthermal photon emission spectrum of γ{sup 2} Velorum. We use 3D magnetohydrodynamic modeling (MHD) to investigate the structure and conditions of the wind-collision region (WCR) of γ{sup 2} Velorum including the important effect of radiative braking in the stellar winds. A transport equation is then solved for the entire computational domain to study the propagation of relativistic electrons and protons. The resulting distributions of particles are subsequently used to compute nonthermal photon emission components. In agreement with observation in X-ray spectroscopy, our simulations yield a large shock-cone opening angle. We find the nonthermal γ-ray emission of γ{sup 2} Velorum to be of hadronic origin owing to the strong radiation fields in the binary system, which inhibit the acceleration of electrons to energies sufficiently high for efficient inverse-Compton radiation. We also discuss the strong dependence of a hadronic γ-ray component on the energy-dependent diffusion used in the simulations. Of two mass-loss rates for the WR star found in literature, only the higher rate is able to accommodate the observed γ-ray spectrum with reasonable values for important simulation parameters such as the injection ratio of high-energy particles within the WCR.

79 ASTRONOMY AND ASTROPHYSICS↗

In situ study of the endotaxial growth of hexagonal CoSi{sub 2} nanoplatelets in Si(001)

This investigation aims at studying–by in situ grazing-incidence small-angle x-ray scattering–the process of growth of hexagonal CoSi{sub 2} nanoplatelets endotaxially buried in a Si(001) wafer. The early formation of spherical Co nanoparticles with bimodal size distribution in the deposited silica thin film during a pretreatment at 500 °C and their subsequent growth at 700 °C were also characterized. Isothermal annealing at 700 °C promotes a drastic reduction in the number of the smallest Co nanoparticles and a continuous decrease in their volume fraction in the silica thin film. At the same time, Co atoms diffuse across the SiO{sub 2}/Si(001) interface into the silicon wafer, react with Si, and build up thin hexagonal CoSi{sub 2} nanoplatelets, all of them with their main surfaces parallel to Si(111) crystallographic planes. The observed progressive growths in thickness and lateral size of the hexagonal CoSi{sub 2} nanoplatelets occur at the expense of the dissolution of the small Co nanoparticles that are formed during the pretreatment at 500 °C and become unstable at the annealing temperature (700 °C). The kinetics of growth of the volume fraction of hexagonal platelets is well described by the classical Avrami equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calculating RF current condensation with consistent ray-tracing and island heating

Finally, by exploiting the nonlinear amplification of the power deposition of RF waves, current condensation promises new pathways to the stabilization of magnetic islands. We present a numerical analysis of current condensation, coupling a geometrical optics treatment of wave propagation and damping to a thermal diffusion equation solver in the island. Taking into account the island geometry and relativistic damping, previous analytical theory can be made more precise and specific scenarios can be realistically predicted. With this more precise description, bifurcations and associated hysteresis effects could be obtained in an ITER-like scenario at realistic parameter values. Moreover, it is shown that dynamically varying the RF wave launching angles can lead to hysteresis and help to avoid the nonlinear shadowing effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mesoporous Silica Nanoparticles Loaded with Surfactant: Low Temperature Magic Angle Spinning 13C and 29Si NMR Enhanced by Dynamic Nuclear Polarization

We show that dynamic nuclear polarization (DNP) can be used to enhance NMR signals of 13C and 29Si nuclei located in mesoporous organic/inorganic hybrid materials, at several hundreds of nanometers from stable radicals (TOTAPOL) trapped in the surrounding frozen disordered water. The approach is demonstrated using mesoporous silica nanoparticles (MSN), functionalized with 3-(N-phenylureido)propyl (PUP) groups, filled with the surfactant cetyltrimethylammonium bromide (CTAB). The DNP-enhanced proton magnetization is transported into the mesopores via 1H–1H spin diffusion and transferred to rare spins by cross-polarization, yielding signal enhancements εon/off of around 8. When the CTAB molecules are extracted, so that the radicals can enter the mesopores, the enhancements increase to εon/off ≈ 30 for both nuclei. A quantitative analysis of the signal enhancements in MSN with and without surfactant is based on a one-dimensional proton spin diffusion model. The effect of solvent deuteration is also investigated.

36 MATERIALS SCIENCE↗

An EXAFS Spectroscopic, Large-Angle X-Ray Scattering, And Crystallographic Study of Hexahydrated, Dimethyl Sulfoxide And Pyridine 1-Oxide Hexasolvated Mercury(II) Ions

The structure of the solvated mercury(II) ion in water and dimethyl sulfoxide has been studied by means of large-angle X-ray scattering (LAXS) and extended X-ray absorption fine structure (EXAFS) techniques. The distribution of the Hg-O distances is unusually wide and asymmetric in both solvents. In aqueous solution, hexahydrated [Hg(OH{sub 2}){sub 6}]{sup 2+} ions in a distorted octahedral configuration, with the centroid of the HgO distance at 2.38(1) {angstrom}, are surrounded by a diffuse second hydration sphere with HgOII distances of 4.20(2) {angstrom}. In dimethyl sulfoxide, the six HgO and HgS distances of the hexasolvated [Hg{l_brace}OS(CH{sub 3}){sub 2}{r_brace}{sub 6}]{sup 2+} complex are centered around 2.38(1) and 3.45(2) {angstrom}, respectively. The crystal structure of hexakis(pyridine 1-oxide)mercury(II) perchlorate has been redetermined. The space group R implies six equal HgO distances of 2.3416(7) {angstrom} for the [Hg(ONC{sub 5}H{sub 5}){sub 6}]{sup 2+} complex at 100 K. However, EXAFS studies of this compound, and of the solids hexaaquamercury(II) perchlorate and hexakis(dimethyl sulfoxide)mercury(II) trifluoromethanesulfonate, also with six equidistant HgO bonds according to crystallographic results, reveal in all cases strongly asymmetric HgO distance distributions. Vibronic coupling of valence states in a so-called pseudo-Jahn-Teller effect probably induces the distorted configurations.

36 MATERIALS SCIENCE↗

Planck intermediate results: XXXII. The relative orientation between the magnetic field and structures traced by interstellar dust

The role of the magnetic field in the formation of the filamentary structures observed in the interstellar medium (ISM) is a debated topic owing to the paucity of relevant observations needed to test existing models. The Planck all-sky maps of linearly polarized emission from dust at 353 GHz provide the required combination of imaging and statistics to study the correlation between the structures of the Galactic magnetic field and of interstellar matter over the whole sky, both in the diffuse ISM and in molecular clouds. The data reveal that structures, or ridges, in the intensity map have counterparts in the Stokes Q and/or U maps. In this paper, we focus our study on structures at intermediate and high Galactic latitudes, which cover two orders of magnitude in column density, from 10 20 to 10 22 cm -2 . We measure the magnetic field orientation on the plane ofthe sky from the polarization data, and present an algorithm to estimate the orientation of the ridges from the dust intensity map. We use analytical models to account for projection effects. Comparing polarization angles on and off the structures, we estimate the mean ratio between the strengths of the turbulent and mean components of the magnetic field to be between 0.6 and 1.0, with a preferred value of 0.8. We find that the ridges are usually aligned with the magnetic field measured on the structures. This statistical trend becomes more striking for increasing polarization fraction and decreasing column density. There is no alignment for the highest column density ridges. We interpret the increase in alignment with polarization fraction as a consequence of projection effects. We present maps to show that the decrease in alignment for high column density is not due to a loss of correlation between the distribution of matter and the geometry of the magnetic field. In molecular complexes, we also observe structures perpendicular to the magnetic field, which, statistically, cannot be accounted for by projection effects. This first statistical study of the relative orientation between the matter structures and the magnetic field in the ISM points out that, at the angular scales probed by Planck, the field geometry projected on the plane of the sky is correlated with the distribution of matter. In the diffuse ISM, the structures of matter are usually aligned with the magnetic field, while perpendicular structures appear in molecular clouds. Finally, we discuss our results in the context of models and MHD simulations, which attempt to describe the respective roles of turbulence, magnetic field, and self-gravity in the formation of structures in the magnetized ISM.

79 ASTRONOMY AND ASTROPHYSICS↗

Gramicidin and chlorhexidine encapsulated in bicontinuous microemulsions: Antimicrobial activity performance and their impact on self‐assembly

The utility of bicontinuous microemulsions (BMEs) as carriers of the antimicrobial peptide (AMP) gramicidin D and antiseptic chlorhexidine was investigated for possible topical delivery to chronic wounds. The two water-insoluble solutes dissolved in pre-formed one-phase BMEs of Water/Polysorbate 80/Limonene/Ethanol/Glycerol and Water/Aerosol-OT (AOT)/Polysorbate 85/Isopropyl Myristate and an AOT/Polysorbate 85 Winsor-III system, achieving gramicidin and chlorhexidine concentrations of 1.0 wt% and 0.5% individually and 0.5% and 0.3% in mixtures at 22°C, respectively. Small-angle neutron scattering measurements demonstrated that both solutes decreased surfactant interfacial activity and increased interfacial fluidity for the Polysorbate 80 system. For the AOT/Polysorbate 85 systems, ellipsoidal aggregates consisting of gramicidin and likely adsorbed surfactant and oil formed, while chlorhexidine enhanced the surface activity of surfactants. According to bioassays performed on artificial skin, the incorporation of melittin, gramicidin, and chlorhexidine in general enhanced the bioactivity of Polysorbate 80 BMEs for 24 h treatment against relevant antibiotic-resistant bacteria found on skin relative to controls. Yet, BME treatments were less effective than aqueous melittin control, in contrast to well diffusion bioassays performed previously. The results reflect the strong impact of AMPs and antiseptics on BME structure and dynamics and the complexity of formulating BMEs for optimal antimicrobial activity.

antimicrobial peptides↗

Structural Studies of Alloyed and Nanoparticle Transition Metal Dichalcogenides by Selenium-77 Solid-State Nuclear Magnetic Resonance Spectroscopy

Layered transition metal dichalcogenides (TMDCs) such as MoS 2 , MoSe 2 , and WSe 2 are under intense investigation because they are atomically thin semiconductors with photophysical properties that can be tuned by changing their composition or morphology. Mechanochemical processing has been proposed as a method to obtain alloyed TMDCs in the series Mo 1–x W x S y Se 2–y (x = 0–1; y = 0–2). However, elucidating the chemical transformations occurring at the atomic scale following mechanochemical processing can be challenging because the products are often amorphous or microcrystalline. To address this challenge, we probe TMDC mixing and alloying by using a combination of powder X-ray diffraction, Raman spectroscopy, diffuse reflectance spectroscopy, 77 Se solid-state nuclear magnetic resonance (SSNMR) spectroscopy, and planewave density functional theory (DFT) calculations. The nature of the milling material and reaction atmosphere are shown to be essential factors in limiting the formation of undesired oxide byproducts. We demonstrate acquisition of 77 Se SSNMR spectra using different combinations of Carr-Purcell Meiboom-Gill acquisition (CPMG) pulse sequences, magic angle spinning (MAS), and MAS dynamic nuclear polarization. Further, the combination of SSNMR with the other characterization methods clearly demonstrates that high energy impact ball milling induces molecular level alloying of Mo, W and chalcogen atoms in the family Mo 1–x W x S y Se 2–y . Gauge including projector augmented wave DFT calculations yield accurate 77 Se chemical shift (CS) tensor components. 77 Se SSNMR spectroscopy was also applied to study the structure of WSe 2 nanocrystals intercalated with ethylenediamine. The intercalated WSe 2 nanocrystals exhibit a more positive isotropic 77 Se CS as compared to bulk WSe 2 , however, the 77 Se CS anisotropy is the same, confirming the WSe 2 layers have a similar structure as in their bulk counterparts.

36 MATERIALS SCIENCE↗

Ligand dynamics control structure, elasticity, and high-pressure behavior of nanoparticle superlattices

Precise engineering of nanoparticle superlattices (NPSLs) for energy applications requires a molecular-level understanding of the physical factors governing their morphology, periodicity, mechanics, and response to external stimuli. Such knowledge, particularly the impact of ligand dynamics on physical behavior of NPSLs, is still in its infancy. Here in this paper, we combine coarse-grained molecular dynamics simulations, and small angle X-ray scattering experiments in a diamond anvil cell to demonstrate that coverage density of capping ligands (i.e., number of ligands per unit area of a nanoparticle's surface), strongly influences the structure, elasticity, and high-pressure behavior of NPSLs using face-centered cubic PbS-NPSLs as a representative example. We demonstrate that ligand coverage density dictates (a) the extent of diffusion of ligands over NP surfaces, (b) spatial distribution of the ligands in the interstitial spaces between neighboring NPs, and (c) the fraction of ligands that interdigitate across different nanoparticles. We find that below a critical coverage density (1.8 nm-2 for 7 nm PbS NPs capped with oleic acid), NPSLs collapse to form disordered aggregates via sintering, even under ambient conditions. Above the threshold ligand coverage density, NPSLs surprisingly preserve their crystalline order even under high applied pressures (~40–55 GPa), and show a completely reversible pressure behavior. This opens the possibility of reversibly manipulating lattice spacing of NPSLs, and in turn, finely tuning their collective electronic, optical, thermo-mechanical, and magnetic properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗