Mechanical characterization of porous nano-thin films by use of atomic force acoustic microscopy
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
We study transient changes of the optical response of WS 2 monolayers by femtosecond broadband pump–probe spectroscopy. Time-dependent absorption spectra are analyzed by tracking the line width broadening, bleaching, and energy shift of the main exciton resonance as a function of time delay after the excitation. Two main sources for the pump-induced changes of the optical response are identified. Specifically, we find an interplay between modifications induced by many-body interactions from photoexcited carriers and by the subsequent transfer of the excitation to the phonon system followed by cooling of the material through the heat transfer to the substrate.
Underlying the rapidly increasing photovoltaic efficiency and stability of metal halide perovskites (MHPs) is the advancement in the understanding of the microstructure of polycrystalline MHP thin film. Over the past decade, intense efforts have been aimed at understanding the effect of microstructures on MHP properties, including chemical heterogeneity, strain disorder, phase impurity, etc. It has been found that grain and grain boundary (GB) are tightly related to lots of microscale and nanoscale behavior in MHP thin films. Atomic force microscopy (AFM) is widely used to observe grain and boundary structures in topography and subsequently to study the correlative surface potential and conductivity of these structures. For now, most AFM measurements have been performed in imaging mode to study the static behavior; in contrast, AFM spectroscopy mode allows us to investigate the dynamic behavior of materials, e.g., conductivity under sweeping voltage. However, a major limitation of AFM spectroscopy measurements is that they require manual operation by human operators, and as such only limited data can be obtained, hindering systematic investigations of these microstructures. Here, we designed a workflow combining the conductive AFM measurement with a machine learning (ML) algorithm to systematically investigate grain boundaries in MHPs. The trained ML model can extract GBs locations from the topography image, and the workflow drives the AFM probe to each GB location to perform a current–voltage (IV) curve automatically. Then, we are able to have IV curves at all GB locations, allowing us to systematically understand the property of GBs. Using this method, we discovered that the GB junction points are less conductive, potentially more photoactive, and can play critical roles in MHP stability, while most previous works only focused on the difference between GB and grains.
Ionic liquids (ILs) have been considered for use in electrostatic gating in complex oxide systems. Understanding the ionic liquid/oxide interface, and any bias-induced electrochemical degradation, is critical for the interpretation of transport phenomena. The integrity of the interface between ionic liquid 1-ethyl-3-methylimidazolium hexafluorophosphate and La 1/3 Sr 2/3 FeO 3 under various biasing conditions was examined by analytical transmission electron microscopy, and we report film degradation in the form of an irreversible chemical reaction regardless of the applied bias. This results in an intermixing region of 4–6 nm at the IL/oxide interface. Electron energy loss spectroscopy shows La and Fe migration into the ionic liquid, resulting in secondary phase formation under negative bias. Our approach can be extended to other ionic liquid/oxide systems in order to better understand the electrochemical stability window of these device structures.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Here, the ability to create and manipulate materials in two-dimensional (2D) form has repeatedly had transformative impact on science and technology. In parallel with the exfoliation and stacking of intrinsically layered crystals 1, 2, 3, 4, 5 , atomic-scale thin film growth of complex materials has enabled the creation of artificial 2D heterostructures with novel functionality 6, 7, 8, 9 and emergent phenomena, as seen in perovskite heterostructures 10, 11, 12 . However, separation of these layers from the growth substrate has proved challenging, limiting the manipulation capabilities of these heterostructures with respect to exfoliated materials. Here we present a general method to create freestanding perovskite membranes. The key is the epitaxial growth of water-soluble Sr 3 Al 2 O 6 on perovskite substrates, followed by in situ growth of films and heterostructures. Millimetre-size single-crystalline membranes are produced by etching the Sr 3 Al 2 O 6 layer in water, providing the opportunity to transfer them to arbitrary substrates and integrate them with heterostructures of semiconductors and layered compounds 13, 14 .
Explore the source record for details and available documents.
The slowing down of heavy ions in matter is still not well understood especially at low energies (<0.5 MeV/u). In this contribution we present new experimental data for the stopping power of Au for Ti ions using an elastic recoil technique where a heavy-ion beam at low energies is produced by elastic scattering of an energetic primary beam imping on a thin target. Atoms from the target recoil at low energies. We compare our experimental data with previous data and with semi-empirical and theoretical models.
A diamond logic inverter is demonstrated using an enhancement-mode hydrogenated-diamond metal-insulator-semiconductor field effect transistor (MISFET) coupled with a load resistor. The gate insulator has a bilayer structure of a sputtering-deposited LaAlO{sub 3} layer and a thin atomic-layer-deposited Al{sub 2}O{sub 3} buffer layer. The source-drain current maximum, extrinsic transconductance, and threshold voltage of the MISFET are measured to be −40.7 mA·mm{sup −1}, 13.2 ± 0.1 mS·mm{sup −1}, and −3.1 ± 0.1 V, respectively. The logic inverters show distinct inversion (NOT-gate) characteristics for input voltages ranging from 4.0 to −10.0 V. With increasing the load resistance, the gain of the logic inverter increases from 5.6 to as large as 19.4. The pulse response against the high and low input voltages shows the inversion response with the low and high output voltages.
In this study, the molecular beam epitaxy(MBE) technique is well known for producing atomically smooth thin films as well as impeccable interfaces in multilayers of many different materials. In particular, molecular beam epitaxy is well suited to the growth of complex oxides, materials that hold promise for many applications. Rapid synthesis and high throughput characterization techniques are needed to tap into that potential most efficiently. We discuss our approach to doing that, leaving behind the traditional one-growth-one-compound scheme and instead implementing combinatorial oxide molecular beam epitaxy in a custom built system.
We have precisely measured the energy loss of carbon cluster ions C{sub n}{sup +} with a kinetic energy of 0.5 MeV/atom. The measured energies, lost in a thin carbon foil by cluster ions, are lower than that of an atomic ion with the equivalent speed [{Delta}E(C{sub n}{sup +})/n<{Delta}E(C{sup +})], whereas most existing experimental results show the opposite trend with kinetic energies higher than 2.0 MeV/atom. The experimental values are compared with the calculated ones, which take into account the effect of the Coulomb force, polarization force, and reduction in the cluster average charge on the response of a solid. The agreement between the measured and calculated energy losses indicates that the reduction in the energy loss is due to a structural correlation in electron excitation during the passage of the cluster.
Not Available
A model of the acceleration of light impurity particles from a plane ultrathin foil of complex ion composition by a high-power ultrashort high-contrast laser pulse is proposed. A study is made of both purely Coulomb ion acceleration, typical of extremely high electron energies, and ion acceleration under the conditions of space charge separation, determined by the finite typical electron temperature. Exact and approximate analytic approaches to describing impurity particle acceleration are developed. The spatial and spectral parameters of accelerated light particles are obtained, and their dynamics is investigated as a function of their relative charge density in a model of test impurity particles and in a model in which their own electrostatic field is taken into account. Optimum conditions for the generation of quasi-monoenergetic ions are discussed, depending on the laser radiation parameters and target composition.
The ability to create and manipulate materials in two-dimensional (2D) form has repeatedly had transformative impact on science and technology. In parallel with the exfoliation and stacking of intrinsically layered crystals, atomic-scale thin film growth of complex materials has enabled the creation of artificial 2D heterostructures with novel functionality and emergent phenomena, as seen in perovskite heterostructures. However, separation of these layers from the growth substrate has proven challenging, limiting the manipulation capabilities of these heterostructures with respect to exfoliated materials. Here we present a general method to create freestanding perovskite membranes. The key is the epitaxial growth of water-soluble Sr 3 Al 2 O 6 on perovskite substrates, followed by in situ growth of films and heterostructures. Millimetre-size single-crystalline membranes are produced by etching the Sr 3 Al 2 O 6 layer in water, providing the opportunity to transfer them to arbitrary substrates and integrate them with heterostructures of semiconductors and layered compounds.
The mapping of far-infrared C(+) and O(0) fine-structure lines and the first detection of far-infrared CO and OH rotational line emission and OH absorption toward the Galactic center are reported. These measurments are compared with far-infrared and radio continuum maps, with recent observations of the 12.8 micron forbidden Ne II line, and with measurements of CO 2.6 mm emission and H I 21 cm absorption. The new observations clearly show that there is a 10 pc diameter neutral gas disk or torus of several times 10,000 solar masses surrounding the inner ionized cavity. The disk has an inner radius of 1.7 pc, is inclined by about 20 deg to the Galactic plane, and may be quite thin. The atomic gas in the neutral disk is dense and fills less than 10 percent of the volume. The disk rotates about the Galactic center about an axis remarkably similar to that of the Galactic rotation at much larger scales.
Abstract not provided.
Explore the source record for details and available documents.