Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Surface states of strained thin films of the Dirac semimetal Cd 3 As 2

Herein we report on the growth and transport properties of strained thin films of the three-dimensional Dirac semimetal Cd 3 As 2 . Epitaxial heterostructures, consisting of (112)-oriented Cd 3 As 2 films, are grown on nearly lattice matched ( Ga 1 - x In x ) Sb buffer layers on (111) GaAs substrates by molecular beam epitaxy. The epitaxial coherency strain breaks the fourfold rotational symmetry, which protects the bulk Dirac nodes in Cd 3 As 2 . All strained films exhibit the quantum Hall effect with most carriers residing in the two-dimensional states, irrespective of the sign of the biaxial stress. The Hall mobility monotonically increases as the biaxial stress is changed from compressive towards tensile. Furthermore, pronounced anisotropy is seen in the transport properties. The results show that the quantum Hall effect, which is quite similar to that of unstrained (112)-oriented films, is independent of the presence of bulk Dirac nodes. Its appearance is consistent with the topological surface states that are a characteristic of the topological Z 2 invariant.

36 MATERIALS SCIENCE↗

Defects in C d 3 A s 2 epilayers via molecular beam epitaxy and strategies for reducing them

Molecular beam epitaxy offers an exciting avenue for investigating the behavior of the topological semimetal Cd 3 As 2 , by providing routes for doping, alloying, strain engineering, and heterostructure formation. To date, however, minimal exploration has been devoted to the impact of defects that are incorporated into epilayers due to constraints imposed by the substrate and narrow growth window. Here, we use a combination of lattice-matched Zn x Cd 1-x Te buffer layers, miscut substrates, and broadband illumination to study how dislocations, twins, and point defects influence the electron mobility of Cd 3 As 2 . In conclusion, a combination of defect suppression approaches produces Cd 3 As 2 epilayers with electron mobilities upwards of 15000 cm 2 /Vs at room temperature.

14 SOLAR ENERGY↗

Structure-property relationships and mobility optimization in sputtered La-doped BaSn O 3 films: Toward 100cm 2 V -1 s -1

he wide band gap semiconducting perovskite BaSnO 3 is of high current interest due to outstanding room temperature mobility at high electron density, fueled by potential applications in oxide, transparent, and power electronics. Due in part to a lack of lattice-matched substrates, BaSnO 3 thin films suffer from high defect densities, however, limiting electron mobility. Additionally, the vast majority of BaSnO 3 thin film research has focused on pulsed laser deposition or molecular beam epitaxy. In this work, we present an exhaustive optimization of the mobility of Ba 0.98 La 0.02 SnO 3 films grown by a scalable, high-throughput method: high-pressure-oxygen sputter deposition. Considering target synthesis conditions, substrate selection, buffer layer structure, deposition temperature, deposition rate, thickness, and postdeposition annealing conditions, and by combining high-resolution x-ray diffraction, reciprocal space mapping, rocking curve analysis, scanning transmission electron microscopy, atomic force microscopy, and temperature-dependent electronic transport measurements, detailed understanding of synthesis-structure-property relationships is attained. Optimized room temperature mobility of 96 cm 2 V –1 s –1 is achieved in vacuum-annealed GdScO 3 (110)/BaSnO 3 (120 nm)/Ba 0.98 La 0.02 SnO 3 (200 nm) heterostructures, as well as 92 cm 2 V –1 s –1 on unbuffered substrates and 87 2 V –1 s –1 without postdeposition annealing. These results, including important trends in defect densities and a surprising dependence of mobility on lattice mismatch, substantially expand the understanding of the interplay between deposition conditions, microstructure, and transport in doped BaSnO 3 films, establishing competitive mobilities in films fabricated via a scalable, high-throughput, industry-standard technique.

36 MATERIALS SCIENCE↗

Epitaxial growth, magnetoresistance, and electronic band structure of GdSb magnetic semimetal films

Motivated by observations of extreme magnetoresistance (XMR) in bulk crystals of rare-earth monopnictide (RE-V) compounds and emerging applications in novel spintronic and plasmonic devices based on thin-film semimetals, we have investigated the electronic band structure and transport behavior of epitaxial GdSb thin films grown on III-V semiconductor surfaces. The Gd 3 + ion in GdSb has a high spin S=7/2 and no orbital angular momentum, serving as a model system for studying the effects of antiferromagnetic order and strong exchange coupling on the resulting Fermi surface and magnetotransport properties of RE-Vs. Here, we present a surface and structural characterization study mapping the optimal synthesis window of thin epitaxial GdSb films grown on III-V lattice-matched buffer layers via molecular-beam epitaxy. To determine the factors limiting XMR in RE-V thin films and provide a benchmark for band-structure predictions of topological phases of RE-Vs, the electronic band structure of GdSb thin films is studied, comparing carrier densities extracted from magnetotransport, angle-resolved photoemission spectroscopy (ARPES), and density-functional theory (DFT) calculations. ARPES shows a hole-carrier rich, topologically trivial, semimetallic band structure close to complete electron-hole compensation, with quantum confinement effects in the thin films observed through the presence of quantum-well states. DFT-predicted Fermi wave vectors are in excellent agreement with values obtained from quantum oscillations observed in magnetic field-dependent resistivity measurements. An electron-rich Hall coefficient is measured despite the higher hole-carrier density, attributed to the higher electron Hall mobility. The carrier mobilities are limited by surface and interface scattering, resulting in lower magnetoresistance than that measured for bulk crystals.

36 MATERIALS SCIENCE↗

Role of structural defects in mediating disordering processes at irradiated epitaxial Fe 3 O 4 / Cr 2 O 3 interfaces

Disordering processes in oxide materials are complicated by the presence of interfaces, which can serve as either point defect sinks or accumulation sites; the response depends on factors such as interfacial structure, chemistry, and termination. Here, we have characterized the disordering of epitaxial Fe 3 O 4 (111) / Cr 2 O 3 (0001) thin film heterostructures after 400 keV Ar 2+ radiation at room temperature. The density of misfit dislocations in both the Fe 3 O 4 overlayer and Cr 2 O 3 buffer layer is varied by changing the thickness of Cr 2 O 3 to be pseudomorphically strained to the Al 2 O 3 (0001) substrate (5 nm thick) or partially relaxed (20 nm thick), as confirmed by Bragg filtering analysis of scanning transmission electron microscopy images. In both cases, irradiation leads to damage accumulation on the Fe 3 O 4 side of the heterointerface, as shown by Rutherford backscattering spectrometry measurements in the channeling geometry. However, the interface with more misfit dislocations exhibits disordering at a faster rate than the less-defective interface. Likewise, layer-resolved electron energy loss spectroscopy reveals interfacial reduction of Fe after irradiation at the more defective interface. Intermixing of Cr across the interface is observed by atom probe tomography, which is likely facilitated by the generation of Cr interstitials in Cr 2 O 3 under irradiation.

36 MATERIALS SCIENCE↗

Electrical and Optical Properties of n-Type Indium-Doped CdTe/Mg 0.46 Cd 0.54 Te Double Heterostructures

CdTe/Mg 0.46 Cd 0.54 Te double heterostructures with n-type In doping concentrations, varied from 1 × 10 16 to 7 × 10 18 cm -3 , have been grown on InSb substrates using molecular beam epitaxy. Secondary ion mass spectroscopy measurements show strong diffusion of In from the InSb substrate to the CdTe buffer layer, while the In concentration is constant in the CdTe layer between the two Mg 0.46 Cd 0.54 Te barrier layers. Capacitance–voltage measurements show that the dopants are 100% ionized for the doping concentration range from 1 × 10 16 to 1 × 10 18 cm -3 . Additionally, the carrier lifetime decreases with increasing doping concentration (from 0.73 μs for an unintentionally doped sample to 0.74 ns for a 1 × 10 18 cm -3 doped sample) due to the decrease of both radiative and nonradiative lifetimes. Decent carrier lifetimes are achieved (~100 ns) between 1 × 10 16 and 1 × 10 17 cm -3 doping levels, which is beneficial for developing n-type monocrystalline CdTe solar cells, photodetectors, and other optoelectronic devices. Lastly, the strongest photoluminescence intensity is observed when the doping concentration is 1 × 10 17 cm -3 , which corresponds to the highest internal quantum efficiency.

14 SOLAR ENERGY↗

Intermixing and Formation of Cu-Rich Secondary Phases at Sputtered CdS/CuInGaSe 2 Heterojunctions

In this work, the Cu migration behavior in PVD-CdS/PVD-Cu(In,Ga)Se 2 (CIGS) heterojunctions is investigated by high-resolution electron microscopy (HREM) and energy dispersive X-ray spectroscopy (EDS). Incorporation of Cu into the CdS forms Cu-rich domains but has no effect on epitaxy of the CdS. Epitaxy is commonly observed in the CdS studied. Secondary ion mass spectroscopy depth profiles confirm the presence of Cu in the CdS. In some cases, Cd is completely replaced by Cu, resulting in a Cu-S binary compound epitaxially grown on the CIGS and fully coherent with the surrounding CdS. This is most likely to be cubic Cu 2 S, based on lattice spacing measurements from HREM images and EDS elemental quantification. In addition, we find that the buffer layer crystal structure influences the extent of Ga depletion at the CIGS surface, which is more pronounced adjacent to zinc-blende CdS than wurtzite CdS. Density functional theory calculations reveal that Cu clustering and different Ga depletion widths can be attributed to the inherent anisotropy of wurtzite CdS and differences in CIGS point-defect migration barriers. Understanding the influence of these effects on device properties is a critical step in developing more efficient CdS/CIGS-based photovoltaics.

14 SOLAR ENERGY↗

Tailoring MgZnO/CdSeTe Interfaces for Photovoltaics

Mg x Zn 1-x O (MZO) shows great promise to replace CdS as a buffer layer in CdTe-based solar cells. It is more transparent, and the MZO bandgap and electron density can be tuned, thus providing flexibility in controlling the conduction band offsets and recombination rates between transparent conductive oxide/MZO and MZO/CdSeTe interfaces. Integrating this material into solar cell devices has been frustrated by the common observation of abnormal current-voltage curves. Simulations indicate that this anomalous behavior can be attributed to front interface barrier effects. Experiments demonstrate that this common MZO interface problem can be resolved experimentally by surface preparation, preheat steps, and removing oxygen during absorber deposition and CdCl 2 treatment. Oxygen during the cell fabrication process is likely to alter MZO properties and MZO/CdSeTe band alignment. After addressing these interface issues and modest optimization, devices with high short-circuit density of 29 mA/cm 2 and efficiency above 16% are demonstrated.

14 SOLAR ENERGY↗

Device Engineering Towards Improved Tin Sulfide Solar Cell Performance and Performance Reproducibility

As novel absorber materials are developed and screened for their photovoltaic (PV) properties, the challenge remains to rapidly test promising candidates in high-performing PV devices. There is a need to engineer new compatible device architectures, including the development of novel transparent conductive oxides and buffer layers. Here, we consider the two approaches of a substrate-style and a superstrate-style device architecture for novel thin-film solar cells. We use tin sulfide as a test absorber material. Upon device engineering, we demonstrate new approaches to improve device performance and performance reproducibility.

14 SOLAR ENERGY↗

Optoelectronic Characterization of Emerging Solar Absorber Cu3AsS4

Enargite Cu 3 AsS 4 is a promising absorber for thin-film solar cells but little is known about its optoelectronic properties. Here, we present photoluminescence (PL) spectroscopy, time-resolved terahertz spectroscopy (TRTS), timeresolved photoluminescence (TRPL) spectroscopy, and cyclic voltammetry (CV) measurements of enargite thin films. The results indicate promising defect characteristics with minority carrier lifetimes on the order of ns, and band alignments suggest that buffer layers besides CdS must be developed to achieve high efficiency Cu 3 AsS 4 solar cells.

14 SOLAR ENERGY↗

Optimization of Transition Edge Sensor Arrays for Cosmic Microwave Background Observations With the South Pole Telescope

In this paper, we describe the optimization of transition-edge-sensor (TES) detector arrays for the third-generation camera for the South PoleTelescope. The camera, which contains similar to 16 000 detectors, will make high-angular-resolution maps of the temperature and polarization of the cosmic microwave background. Our key results are scatter in the transition temperature of Ti/Au TESs is reduced by fabricating the TESs on a thin Ti(5 nm)/Au(5 nm) buffer layer and the thermal conductivity of the legs that support our detector islands is dominated by the SiOx dielectric in the microstrip transmission lines that run along the legs.

Ding, Junjia↗

Metal-Insulation REBCO Pancake Coil With Solder Surface Shunt: Testing and Modeling

Rare-earth barium copper oxide (REBCO) high-temperature superconducting (HTS) magnets can generate very high magnetic fields with superior engineering current density and robust mechanical integrity. The no-insulation (NI) winding technique, including its metal-insulation (MI) variant, enables “self-protection” against localized overheating through inter-turn current sharing, improving defect tolerance and allowing temporary current overloads. In REBCO pancake coils, the current-sharing path is predominantly confined to the edges of the REBCO tapes due to insulating buffer layers. Applying a surface shunt using solder can effectively enhance current sharing in NI/MI coils via the REBCO tape edges. Here, in this paper, we present both experimental and numerical research on the current distribution in surface-shunt metal-insulation (SSMI) REBCO pancake coils. We tested a stainless steel co-wound MI REBCO double-pancake coil, before and after applying a soldered surface shunt, in a saturated liquid nitrogen bath. The SSMI coil was modeled using the H-formulation and rotated anisotropic resistivity to study its dynamic behavior, including inter-turn current sharing and intra-turn screening currents. Benchmarked by experimental data, the numerical model is able to study the defect tolerance of the SSMI coil during energization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-Field Stress, Low-Frequency Noise, and Long-Term Reliability of AlGaN/GaN HEMTs

A small degradation of threshold voltage and a significant reduction in dc and RF transconductance are observed for AlGaN/GaN high-electron-mobility transistors fabricated via three different process techniques and subjected to high voltage stress in the semi-ON bias condition. Low-frequency noise measurements as a function of temperature show peaks at ~0.2, ~0.5, ~0.7, and/or ~0.8 eV that increase with the magnitude and duration of high-field stress. The dehydrogenation of passivated Fe and O impurity defects and/or N antisite defects leads to increased charge trapping, noise, and transconductance degradation. Density functional theory calculations show that Ga vacancy motion and dehydrogenation of substitutional Fe complexes in the GaN buffer layer also contribute significantly to the poststress degradation of these devices. At higher stress voltages, these defects also likely contribute to device failure.

1/f noise↗

Total-Ionizing-Dose Effects and Low-Frequency Noise in 16-nm InGaAs FinFETs With HfO 2 /Al 2 O 3 Dielectrics

Here, total-ionizing-dose mechanisms are investigated in 16-nm InGaAs FinFETs with an HfO 2 /Al 2 O 3 gate-stack. Transistors are irradiated up to 500 krad(SiO 2 ) and annealed at high temperatures. Irradiated devices show negative threshold-voltage V th shifts, subthreshold stretch-out, and leakage current increases. These result from positive charge trapping in the gate oxide and shallow trench insulators, and increases in the interface and border-trap charge densities. Low-frequency noise measurements at different temperatures indicate a significant increase of noise magnitude in irradiated devices at an activation energy of ~0.4 eV. Density functional theory (DFT) calculations strongly suggest that transistor V th shifts are due primarily to hole trapping at oxygen vacancies in HfO 2 , and the increased noise is due primarily to O vacancies in Al 2 O 3 . Additional contributions to the noise from defects in the GaAs buffer layer are also likely, primarily at low temperatures.

total dose effects↗

Direct growth of hexagonal InN films on 6H-SiC by radio-frequency metal-organic molecular-beam epitaxy

Wurtzite InN films were prepared on a 6H-SiC substrate by a self-designed plasma-assisted metal-organic molecular-beam epitaxy system without a buffer layer. In this article, the authors investigate the structural and optical properties of InN films grown on a 6H-SiC substrate. The crystallinity and microstructure of the thin film were further characterized by x-ray diffraction (XRD), field-emission scanning-electron microscopy, and transmission-electron microscopy. Electrical and optical properties were evaluated by Hall and photoluminescence (PL) measurements. XRD results indicate that InN film grown at 500 deg. C is epitaxially grown along the c-axis orientation. The two-dimensional growth mode is clearly shown in scanning-electron microscope images. Room-temperature PL spectra show that the emission peak is located at {approx}0.83 eV due to the Burstein-Moss effect. In addition, the crystalline InN samples crack and peel away from the substrate at elevated growth temperature. This phenomenon may be attributed to lattice mismatch and grain coalescence while increasing the growth temperature. The narrow window of the growth temperature plays an important role in engineering the InN epitaxial growth.

36 MATERIALS SCIENCE↗

Initial stages of growth and the influence of temperature during chemical vapor deposition of sp{sup 2}-BN films

Knowledge of the structural evolution of thin films, starting by the initial stages of growth, is important to control the quality and properties of the film. The authors present a study on the initial stages of growth and the temperature influence on the structural evolution of sp{sup 2} hybridized boron nitride (BN) thin films during chemical vapor deposition (CVD) with triethyl boron and ammonia as precursors. Nucleation of hexagonal BN (h-BN) occurs at 1200 °C on α-Al{sub 2}O{sub 3} with an AlN buffer layer (AlN/α-Al{sub 2}O{sub 3}). At 1500 °C, h-BN grows with a layer-by-layer growth mode on AlN/α-Al{sub 2}O{sub 3} up to ∼4 nm after which the film structure changes to rhombohedral BN (r-BN). Then, r-BN growth proceeds with a mixed layer-by-layer and island growth mode. h-BN does not grow on 6H-SiC substrates; instead, r-BN nucleates and grows directly with a mixed layer-by-layer and island growth mode. These differences may be caused by differences in substrate surface temperature due to different thermal conductivities of the substrate materials. These results add to the understanding of the growth process of sp{sup 2}-BN employing CVD.

36 MATERIALS SCIENCE↗

(Mg,Mn,Fe,Co,Ni)O: A rocksalt high-entropy oxide containing divalent Mn and Fe

High-entropy oxides (HEOs) have aroused growing interest due to fundamental questions relating to their structure formation, phase stability, and the interplay between configurational disorder and physical and chemical properties. Introducing Fe(ιι) and Mn(ιι) into a rocksalt HEO is considered challenging, as theoretical analysis suggests that they are unstable in this structure under ambient conditions. Here, we develop a bottom-up method for synthesizing Mn- and Fe-containing rocksalt HEO (FeO-HEO). We present a comprehensive investigation of its crystal structure and the random cation-site occupancy. We show the improved structural robustness of this FeO-HEO and verify the viability of an oxygen sublattice as a buffer layer. Compositional analysis reveals the valence and spin state of the iron species. We further report the antiferromagnetic order of this FeO-HEO below the transition temperature ~218 K and predict the conditions of phase stability of Mn- and Fe-containing HEOs. Our results provide fresh insights into the design and property tailoring of emerging classes of HEOs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic electronic structure in the cuprate parent state from quantum many-body simulations

The quantitative description of correlated electron materials remains a modern computational challenge. We demonstrate a numerical strategy to simulate correlated materials at the fully ab initio level beyond the solution of effective low-energy models and apply it to gain a detailed microscopic understanding across a family of cuprate superconducting materials in their parent undoped states. We uncover microscopic trends in the electron correlations and reveal the link between the material composition and magnetic energy scales through a many-body picture of excitation processes involving the buffer layers. Our work illustrates a path toward a quantitative and reliable understanding of more complex states of correlated materials at the ab initio many-body level.

Science & Technology - Other Topics↗