Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Visualizing nanoscale 3D compositional fluctuation of lithium in advanced lithium-ion battery cathodes

The distribution and concentration of lithium in Li-ion battery cathodes at different stages of cycling is a pivotal factor in determining battery performance. Non-uniform distribution of the transition metal cations has been shown to affect cathode performance; however, the Li is notoriously challenging to characterize with typical high-spatial-resolution imaging techniques. Here, for the first time, laser–assisted atom probe tomography is applied to two advanced Li-ion battery oxide cathode materials—layered Li 1.2 Ni 0.2 Mn 0.6 O 2 and spinel LiNi 0.5 Mn 1.5 O 4 —to unambiguously map the three dimensional (3D) distribution of Li at sub-nanometer spatial resolution and correlate it with the distribution of the transition metal cations (M) and the oxygen. The as-fabricated layered Li 1.2 Ni 0.2 Mn 0.6 O 2 is shown to have Li-rich Li 2 MO 3 phase regions and Li-depleted Li(Ni 0.5 Mn 0.5 )O 2 regions while in the cycled layered Li 1.2 Ni 0.2 Mn 0.6 O 2 an overall loss of Li and presence of Ni rich regions, Mn rich regions and Li rich regions are shown in addition to providing the first direct evidence for Li loss on cycling of layered LNMO cathodes. The spinel LiNi 0.5 Mn 1.5 O 4 cathode is shown to have a uniform distribution of all cations. These results were additionally validated by correlating with energy dispersive spectroscopy mapping of these nanoparticles in a scanning transmission electron microscope. Thus, we have opened the door for probing the nanoscale compositional fluctuations in crucial Li-ion battery cathode materials at an unprecedented spatial resolution of sub-nanometer scale in 3D which can provide critical information for understanding capacity decay mechanisms in these advanced cathode materials.

36 MATERIALS SCIENCE↗

A general solution-chemistry route to the synthesis LiMPO{sub 4} (M=Mn, Fe, and Co) nanocrystals with [010] orientation for lithium ion batteries

A general and efficient solvothermal strategy has been developed for the preparation of lithium transition metal phosphate microstructures (LiMnPO{sub 4}, LiFePO{sub 4}, and LiCoPO{sub 4}), employing ethanol as the solvent, LiI as the Li source, metal salts as the M sources, H{sub 3}PO{sub 4} as the phosphorus source, and poly(vinyl pyrrolidone) (PVP) as the carbon source and template. This route features low cost, environmental benign, and one-step process for the cathode material production of Li-ion batteries without any complicated experimental setups and sophisticated operations. The as-synthesized LiMPO{sub 4} microstructures exhibit unique, well-shaped and favorable structures, which are self-assembled from microplates or microrods. The b axis is the preferred crystal growth orientation of the products, resulting in a shorter lithium ion diffusion path. The LiFePO{sub 4} microstructures show an excellent cycling stability without capacity fading up to 50 cycles when they are used as a cathode material in lithium-ion batteries. - Graphical abstract: A general and efficient solvothermal strategy has been developed for the preparation of lithium transition metal phosphate microstructures under solvothermal conditions in the presence of PVP. Highlights: > A general and efficient solvothermal strategy has been developed for the preparation of LiMPO{sub 4} microstructures. > This route features low cost, environmental benign, and one-step process. > The LiMPO{sub 4} microstructures exhibit unique, well-shaped, and favorable structures. > The LiFePO{sub 4} microstructures show an excellent cycling stability up to 50 cycles as a cathode material of lithium-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into the Effects of Zinc Doping on Structural Phase Transition of P2-Type Sodium Nickel Manganese Oxide Cathodes for High-Energy Sodium Ion Batteries

P2-type sodium nickel manganese oxide-based cathode materials with higher energy densities are prime candidates for applications in rechargeable sodium ion batteries. A systematic study combining in situ high energy X-ray diffraction (HEXRD), ex situ Xray absorption fine spectroscopy (XAFS), transmission electron microscopy (TEM), and solid-state nuclear magnetic resonance (SSNMR) techniques was carried out to gain a deep insight into the structural evolution of P2-Na 0.66 Ni 0.33-x Zn x Mn 0.67 O 2 (x = 0, 0.07) during cycling. In situ HEXRD and ex situ TEM measurements indicate that an irreversible phase transition occurs upon sodium insertion-extraction of Na 0.66 Ni 0.33 Mn 0.67 O 2 . Zinc doping of this system results in a high structural reversibility. XAFS measurements indicate that both materials are almost completely dependent on the Ni 4+ /Ni 3+ / Ni 2+ redox couple to provide charge/discharge capacity. SS-NMR measurements indicate that both reversible and irreversible migration of transition metal ions into the sodium layer occurs in the material at the fully charged state. The irreversible migration of transition metal ions triggers a structural distortion, leading to the observed capacity and voltage fading. Our results allow a new understanding of the importance of improving the stability of transition metal layers.

36 MATERIALS SCIENCE↗

Nanostructured MnO2-Based Cathodes for Li-Ion/Polymer Cells

Nanostructured MnO2-based cathodes for Li-ion/polymer electrochemical cells have been investigated in a continuing effort to develop safe, high-energy-density, reliable, low-toxicity, rechargeable batteries for a variety of applications in NASA programs and in mass-produced commercial electronic equipment. Whereas the energy densities of state-of-the-art lithium-ion/polymer batteries range from 150 to 175 W h/kg, the goal of this effort is to increase the typical energy density to about 250 W h/kg. It is also expected that an incidental benefit of this effort will be increases in power densities because the distances over which Li ions must diffuse through nanostructured cathode materials are smaller than those through solid bulk cathode materials.

Skandan, Ganesh↗

Protonation Stimulates the Layered to Rock Salt Phase Transition of Ni‐Rich Sodium Cathodes

Abstract Protonation of oxide cathodes triggers surface transition metal dissolution and accelerates the performance degradation of Li‐ion batteries. While strategies are developed to improve cathode material surface stability, little is known about the effects of protonation on bulk phase transitions in these cathode materials or their sodium‐ion battery counterparts. Here, using NaNiO 2 in electrolytes with different proton‐generating levels as model systems, a holistic picture of the effect of incorporated protons is presented. Protonation of lattice oxygens stimulate transition metal migration to the alkaline layer and accelerates layered‐rock‐salt phase transition, which leads to bulk structure disintegration and anisotropic surface reconstruction layers formation. A cathode that undergoes severe protonation reactions attains a porous architecture corresponding to its multifold performance fade. This work reveals that interactions between electrolyte and cathode that result in protonation can dominate the structural reversibility/stability of bulk cathodes, and the insight sheds light for the development of future batteries.

25 ENERGY STORAGE↗

Materials and Approaches for Mitigation of SOFC Cathode Degradation in SOFC Power Systems

Perovskites such as doped lanthanum manganite and cobaltite have been used successfully as a cathode material in SOFC power systems operating between 700-1000°C. The electrodes, however, remain prone to degradation in presence of Cr containing gas atmosphere under systems operating conditions. Cathode in SOFCs is considered as one of the largest contributors of electrochemical performance degradations, leading to significant increase in ohmic and non-ohmic losses as well as interfacial compound formation. These degradations are mostly irreversible due to permanent changes to chemical and morphological alterations in the electrodes, resulting in the blockage of triple phase boundary (TPB) sites and decrease in oxygen reduction reactions (ORR). Fundamental mechanistic understanding has been developed to elucidate the reaction pathways of electrode poisoning in electronically conducting electrodes (LSM) as well as mixed ionic and electronically conducting electrodes (LSCF). The overall goal of this program has been identification and development of cost effective solutions to mitigate electrode degradations under “real world” systems operating conditions. The overall technological innovations and impact from this work are: The research provides an understanding of the degradation mechanism and cost-effective approaches for implementation in SOFC systems; Develop mitigation processes utilizing low cost getters using conventional synthesis and fabrication route; Develop tailored high surface area powders and coatings for high Cr capture capacity under systems operating conditions; >Developed computational models to understand mechanistic behavior; Experimentally measure rate of Cr evaporation from chromia and alumina forming alloys under SOFC operating conditions; Developed conditions to minimize Cr evaporation from balance-of-plant alloys; This innovation will support the development of getter platform to capture both intrinsic and extrinsic impurities present in air; and, Applications under wide operating temperature range (500-900°C) as well for wide high-temperature electrochemical systems (SOFC, SOEC, and OTM). The work has been successfully developed, validated experimentally and implemented. Successful technology transfer of this knowledge with industrial partners has been accomplished and the getters have been independently tested and validated under their systems operating conditions. The innovation will also find application in related high temperature electrochemical systems such as OTM and SOEC for the prevention of Cr assisted performance degradation. The proposed approach for Cr capture can also be applied to oxy-combustion and other advanced combustion techniques for the reduction of Cr vapor in the exhaust gas stream. This fundamental knowledge gained also has led to the path forward for developing advanced getters for capturing more than one contaminant in air.

01 COAL, LIGNITE, AND PEAT↗

Evaluation of Mg Compounds as Coating Materials in Mg Batteries

Mg batteries utilizing a Mg metal anode with a high-voltage intercalation cathode define a potential pathway toward energy storage with high energy density. However, the making of Mg batteries is plagued by the instability of existing electrolytes against the Mg-metal anode and high-voltage cathode materials. One viable solution to this problem is the identification of protective coating materials that could effectively separate the distinct chemistries of the metal-anode and the cathode materials from the electrolyte. Using first-principles calculations we mapped the electrochemical stability windows for non-redox-active Mg binary and ternary compounds in order to identify potential coating materials for Mg batteries. Our results identify Mg-halides and Mg(BH 4 ) 2 as promising anode coating materials based on their significant reductive stability. On the cathode side, we single out MgF 2 , Mg(PO 3 ) 2 , and MgP 4 O 11 as effective passivating agents.

25 ENERGY STORAGE↗

Influence of metallic contaminants on the electrochemical and thermal behavior of Li-ion electrodes

Emerging nondestructive (direct) recycling techniques for lithium-ion batteries may introduce metallic impurities into recycled electrodes. In the present work, the impact of such nonionic contaminants on the practical performance of both anode and cathode materials is evaluated using a synergistic combination of electrochemical and thermal analysis. The impurities under study have been selected through evaluation of industrially shredded batteries, and include Fe0, Al0, Mg0, Cu0, and Si0. The electrochemical behavior of materials containing each individual contaminant at either the anode or the cathode is evaluated in both half-cell and full-cell format. Further, the first-cycle thermal signatures of full cells are used to validate and complement electrochemical signatures, and the two techniques are used in conjunction to suggest distinct mechanisms of electrochemical reactivity for the various impurities. At the anode, metallic contaminants are found to disrupt performance through direct reaction with Li and may serve as weak catalysts to accelerate electrolyte degradation. At the cathode, metallic contaminants show evidence of crossover during formation cycling to disrupt SEI formation. We suggest that coupled electrochemical and thermal analysis may be used to both identify the presence of contaminants and to elucidate specific mechanisms of reactivity for metallic impurities under anodic and cathodic conditions.

Contaminant↗

Layered materials with improved magnesium intercalation for rechargeable magnesium ion cells

Electrochemical devices which incorporate cathode materials that include layered crystalline compounds for which a structural modification has been achieved which increases the diffusion rate of multi-valent ions into and out of the cathode materials. Examples in which the layer spacing of the layered electrode materials is modified to have a specific spacing range such that the spacing is optimal for diffusion of magnesium ions are presented. An electrochemical cell comprised of a positive intercalation electrode, a negative metal electrode, and a separator impregnated with a nonaqeuous electrolyte solution containing multi-valent ions and arranged between the positive electrode and the negative electrode active material is described.

25 ENERGY STORAGE↗

Layered materials with improved magnesium intercalation for rechargeable magnesium ion cells

Electrochemical devices which incorporate cathode materials that include layered crystalline compounds for which a structural modification has been achieved which increases the diffusion rate of multi-valent ions into and out of the cathode materials. Examples in which the layer spacing of the layered electrode materials is modified to have a specific spacing range such that the spacing is optimal for diffusion of magnesium ions are presented. An electrochemical cell comprised of a positive intercalation electrode, a negative metal electrode, and a separator impregnated with a nonaqueous electrolyte solution containing multi-valent ions and arranged between the positive electrode and the negative electrode active material is described.

25 ENERGY STORAGE↗

Layered materials with improved magnesium intercalation for rechargeable magnesium ion cells

Electrochemical devices which incorporate cathode materials that include layered crystalline compounds for which a structural modification has been achieved which increases the diffusion rate of multi-valent ions into and out of the cathode materials. Examples in which the layer spacing of the layered electrode materials is modified to have a specific spacing range such that the spacing is optimal for diffusion of magnesium ions are presented. An electrochemical cell comprised of a positive intercalation electrode, a negative metal electrode, and a separator impregnated with a nonaqueous electrolyte solution containing multi-valent ions and arranged between the positive electrode and the negative electrode active material is described.

36 MATERIALS SCIENCE↗

Structural Reliability of Cathode Contact Materials in Planar SOFCs

Despite significant developments in material and stack design technologies to enhance performance, the long-term mechanical reliability of solid oxide fuel cells remained an issue. The contact between electrodes and interconnects (especially the cathode side) was identified as one of the weakest links in present generation planar solid oxide fuel cells. Computational modeling was used to gain valuable insights on the cathode contact sintering mechanics and bond reliability. A continuum viscous sintering model was incorporated into a commercial finite element analysis code to simulate contact material densification and evaluate the bond and stack mechanical reliability due to developed stresses from the contact layer sintering. The parameters required for the cathode contact material constitutive model were extracted from experiments conducted for the contact material development at PNNL. The effects of contact layer thickness and sintering conditions like temperature and pressure on the stack stresses and reliability were investigated.

SOFC, FEA, Reliability↗

Nanostructured material for advanced energy storage : magnesium battery cathode development.

Magnesium batteries are alternatives to the use of lithium ion and nickel metal hydride secondary batteries due to magnesium's abundance, safety of operation, and lower toxicity of disposal. The divalency of the magnesium ion and its chemistry poses some difficulties for its general and industrial use. This work developed a continuous and fibrous nanoscale network of the cathode material through the use of electrospinning with the goal of enhancing performance and reactivity of the battery. The system was characterized and preliminary tests were performed on the constructed battery cells. We were successful in building and testing a series of electrochemical systems that demonstrated good cyclability maintaining 60-70% of discharge capacity after more than 50 charge-discharge cycles.

25 ENERGY STORAGE↗

Toward the Stable and Reversible Lattice Oxygen Redox in Li-Rich Layered Oxides

Conventional wisdom on utilizing cation redox in intercalation materials for energy storage has been challenged by a new class of cathode materials where oxygen anions actively participate in the reversible electrochemical reaction. This type of Li-rich layered oxides (LRLO) have captured great interests in the field of energy storage materials as they are considered as one of the most promising cathode materials for future high energy density lithium-ion and lithium metal batteries. However, the activation of solid-state oxygen redox reaction usually causes some detrimental effects on the electrochemical performance (e.g., O 2 loss, voltage fade) preventing the practical application of LRLO (Y. S. Meng et al., Nature Energy, 2018, 3, 641-647; X. Yu et al., Nature Energy, 2018, 3, 690-698). Till now, the charge-compensation mechanism associated with oxygen reduction/oxidation is still under fierce debate. For instance, J.M. Tarascon et al. proposed the presence of peroxo-like species (O 2 n- , O-O: 2.45 Å) in lattice oxygen redox based on the research results of 4d/5d-TM LRLO (Science, 2015, 350, 1516-1521; Nature Materials, 2017, 16, 580-586). In contrast, P. Bruce et al. clearly demonstrated that there is no peroxide species formed in 3d-TM LRLO (Nature Chemistry, 2016, 8, 684-691). The controversial viewpoints regarding oxygen reduction/oxidation at solid state may be originated from the intrinsic complexity of this class of materials and the limitations of the characterization techniques. Our work reveals the origin of stable and reversible lattice oxygen redox in 3d TM LRLO, specifically, the localized structure distortion (i.e., short O-O pairs) accompanying the oxygen redox is favorable for the stability of the average layered lattice structure, maintaining the high-voltage character and topotactic structure-reversibility of LRLO. With a model compound (Li 1.2 Mn 0.54 Co 0.13 Ni 0.13 O 2 ), we for the first time observe a local occurrence of short O-O pair (~2.39 Å) concomitant with the lattice oxygen redox via neutron pair distribution function. It was found that the distance of this short O-O pair is very similar to that of O-O dimer in peroxo-like species, but our quantum mechanical calculation results suggest that the bonding nature of this short O-O pair (in which potential π-type overlap dominated) is quite different from that of peroxo-like O-O dimer (in which σ-type bond formed). Based on these understandings in our work, an optimization guidance for LRLO is unambiguously presented: designing a robust layered structure with high-covalency TMs while constructing a flexible local structure (e.g., honeycomb structure) with high-ionicity TMs to accommodate the local distortion induced by oxygen redox, thus achieving the reversible high energy density in LRLO.

Zhang, Minghao↗

Excess Li-Ion Storage on Reconstructed Surfaces of Nanocrystals To Boost Battery Performance

Abstract. Due to the enhanced kinetic properties, nanocrystallites have received much attention as potential electrode materials for energy storage. However, because of the large specific surface areas of nanocrystallites, they usually suffer from decreased energy density, reduced cycling stability and total electrode capacity. In this work, we report a size-dependent excess capacity beyond the theoretical value of 170 mAhg-1 in a special carbon coated LiFePO4 composite cathode material, which delivers capacities of 191.2 and 213.5 mAhg-1 with the mean particle sizes of 83 nm and 42 nm, respectively. Moreover, this LiFePO4 composite also shows excellent cycling stability and high rate performance. Our further experimental tests and ab initio calculations reveal that the excess capacity comes from the charge passivation for which the C-O-Fe bonds would lead to charge redistribution on the surface of LiFePO4 and hence to enhance the bonding interaction between surface O atoms and Li-ions. The surface reconstruction for excess Li-ion storage makes full use of the large specific surface area for the nanocrystallites, which can maintain the fast Li-ion transport and enhance the capacity greatly that the nanocrystallites usually suffers.

Duan, Yandong↗

Electrochemistry of lunar rocks

Electrolysis of silicate melts has been shown to be an effective means of producing metals from common silicate materials. No fluxing agents need be added to the melts. From solution in melts of diopside (CaMgSi2O6) composition, the elements Si, Ti, Ni, and Fe have been reduced to their metallic states. Platinum is a satisfactory anode material, but other cathode materials are needed. Electrolysis of compositional analogs of lunar rocks initially produces iron metal at the cathode and oxygen gas at the anode. Utilizing mainly heat and electricity which are readily available from sunlight, direct electrolysis is capable of producing useful metals from common feedstocks without the need for expendable chemicals. This simple process and the products obtained from it deserve further study for use in materials processing in space.

Lindstrom, D. J.↗

Sodium storage property and mechanism of NaCr 1/4 Fe 1/4 Ni 1/4 Ti 1/4 O 2 cathode at various cut-off voltages

Room-temperature sodium-ion batteries (SIBs) have attracted extensive interest in large-scale energy storage applications for renewable energy and smart grid, owing to abundant sodium resources and low cost. O3-layered sodium transition metal oxides (i.e., NaMO 2 , M = Ti, V, Cr, Mn, Fe, Co, Ni, Cu, etc.) are considered as a promising class of cathode materials for SIBs due to their high capacity and ease of synthesis. Here, a quaternary layered material O3–NaCr 1/4 Fe 1/4 Ni 1/4 Ti 1/4 O 2 (O3-NCFNT) is successfully synthesized and investigated as a new cathode material for SIBs. Within the voltage range of 1.5–4.1 V, O3-NCFNT delivers an ultrahigh charge capacity of 213 mA h g –1 but a limited discharge capacity of 107 mA h g –1 in the initial cycle. Ex situ X-ray diffraction and X-ray absorption spectroscopy results reveal that an irreversible phase transformation as well as the irreversible redox of Cr 3+ /Cr 6+ within the voltage range of 1.5–4.1 V should be responsible for the capacity decay in the initial cycle. At the same time, O3-NCFNT exhibits the initial charge/discharge capacities of 135.4 and 129.2 mA h g –1 with a high coulombic efficiency of 95.4% as well as good cyclic performance within the voltage range of 1.5–3.4 V at current rate of 0.1C. Especially, O3-NCFNT shows a capacity retention of 77.1% after 300 cycles at a high rate of 1C, indicating that the structural origins of capacity decay caused by excessive sodium extraction are confirmed by XRD and XAS measurements to unlock the potential of this material for sodium-ion battery application.

25 ENERGY STORAGE↗