Search NASA⌕ Search

SEARCH · Search NASA

Results for “circular orbits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Interplanetary Trajectories, Encke Method (ITEM)

Modified program has been developed using improved variation of Encke method which avoids accumulation of round-off errors and avoids numerical ambiguities arising from near-circular orbits of low inclination. Variety of interplanetary trajectory problems can be computed with maximum accuracy and efficiency.

Whitlock, F. H.↗

Performance of an electrically raised, synchronous satellite when subjected to radiation degradation effects

The use of solar electric propulsion to raise a high-power communication satellite from a low altitude, inclined circular orbit of the geosynchronous orbit is evaluated. Since the satellite ascends through the high intensity radiation belts, the power available from the solar array and therefore to the ion thrusters degrades. The performance of the solar electric stage in combination with the thrust augmented Thor/Delta launch vehicle is evaluated for two thrust steering programs. The transfer times and solar array requirements are presented for total geosynchronous payloads from 450 to 1100 kg.

Cake, J. E.↗

Primary and secondary particle contributions to the depth dose distribution in a phantom shielded from solar flare and Van Allen protons

Calculations have been made using the nucleon-meson transport code NMTC to estimate the absorbed dose and dose equivalent distributions in astronauts inside space vehicles bombarded by solar flare and Van Allen protons. A spherical shell shield of specific radius and thickness with a 30-cm-diam. tissue ball at the geometric center was used to simulate the spacecraft-astronaut configuration. The absorbed dose and the dose equivalent from primary protons, secondary protons, heavy nuclei, charged pions, muons, photons, and positrons and electrons are given as a function of depth in the tissue phantom. Results are given for solar flare protons with a characteristic rigidity of 100 MV and for Van Allen protons in a 240-nautical-mile circular orbit at 30 degree inclination angle incident on both 20-g/sq cm-thick aluminum and polyethylene spherical shell shields.

Santoro, R. T.↗

Advanced small launch vehicle study

A conceptual design study was conducted to determine the most economical (lowest cost/launch) approach for the development of an advanced small launch vehicle (ASLV) for use over the next decade. The ASLV design objective was to place a 340 kg (750 lb) payload into a 556 km (300 n.mi.) circular orbit when launched due east from Wallops Island, Virginia. The investigation encompassed improvements to the current Scout launch vehicle; use of existing military and NASA launch vehicle stages; and new, optionally staged vehicles. Staging analyses included use of liquid, solid, and hybrid propellants. Improvements in guidance, controls, interstages, telemetry, and payload shroud were also considered. It was concluded that the most economical approach is to progressively improve the Scout launch vehicle in three phased steps which are discussed.

Reins, G. E.↗

World maps of predicted electron intensities for the ITOS-A/NOAA-1 spacecraft

Maps of electron fluxes 10,000, 1 million, and 10 million particles/sq cm/sec are presented for an ITOS-A/NOAA-1 circular orbit, inclination of 79 deg, and altitude of 1463 km. The uncertainty in the flux values is about a factor of 3, and the error in contour plotting may be plus or minus 2 deg in latitude and plus or minus 3 deg in longitude. The fractional lifetime spent within the different intensity regions is graphed.

Stassinopoulos, E. G.↗

Preliminary study of the application of the Timation 3 satellite to earth physics

The Timation 3 is a timing and navigation satellite originally planned for launch in December 1972 into a circular orbit at 98 deg inclination 14,000 km altitude with gravity gradient stabilization. An error analysis indicates a satellite position uncertainty of about one meter, 80 percent of which is attributable to the assumed gravity model errors. The remaining uncertainties have a period equal to that of the satellites and can be filtered out yielding an effective uncertainty of about 10 cm in the study of phenomena having different periodicities. The accomplishment of these results depends on a careful consideration of solar radiation pressure taking account of the spacecraft reflecting properties and variations in the presentation area. Consideration is also given to the displacement of the laser reflectors from the center of mass of the spacecraft and to the dynamic coupling of any libration in attitude with the orbital motion. The results indicate that a good set of well distribution laser observations of Timation 3 could yield determinations of polar motion, sea floor spreading, solid earth tides, and earth rotation at the 10 cm level.

Carpenter, L.↗

Scintillation in an earth-to-space propagation path.

Results of an experiment to measure the scintillation at a satellite from a ground-based laser transmitter. The GEOS-II satellite in a nearly circular orbit of 1250 km was illuminated by a ground-based laser tracking station using a 4880-A CW argon laser. A detector aboard the satellite measured the incident light and telemetered the data to recording equipment on the ground. Log-amplitude variance, probability distributions, and scintillation frequency distributions are derived from the data. The probability distribution is shown to be log-normal. Log-amplitude variance and normalized power spectral density are shown to be within the limits measured for stellar scintillation.-

Minott, P. O.↗

Antenna dimensions of synthetic aperture radar systems on satellites

Design of a synthetic aperture radar (SAR) for a satellite must take into account the limitation in weight and dimensions of the antenna. The lower limits of the antenna area are derived from the conditions of unambiguity of the SAR system. This result is applied to estimate the antenna requirements for SARs on satellites in circular orbits of various altitudes around Earth and Venus.

Richter, K. R.↗

Improved ITOS attitude control system with Hall generator brushless motor and earth-splitting technique

The ITOS with an improved attitude control system is described. A Hall generator brushless dc torque motor will replace the brush dc torque motor on ITOS-I and ITOS-A (NOAA-1). The four attitude horizon sensors will be replaced with two CO2 sensors for better horizon definition. An earth horizon splitting technique will be used to keep the earth facing side of the satellite toward earth even if the desired circular orbit is not achieved. The external appearance of the pitch control subsystem differs from TIROS-M (ITOS-1) and ITOS-A (NOAA-1) in that two instead of one pitch control electronics (PCE) boxes are used. Two instead of four horizon sensors will be used and one instead of two mirrors will be used for sensor scanning. The brushless motor will eliminate the requirement for brushes, strain gages and the telemetry for the brush wear. A single rotating flywheel, supported by a single bearing provides the gyroscopic stability and the required momentum interchange to keep one side of the satellite facing the earth. Magnetic torquing against the earth's magnetic field eliminates the requirement for expendable propellants which would limit satellite life in orbit.

Peacock, W. M.↗

Minimum impulse three-body trajectories.

A rapid and accurate method of calculating optimal impulsive transfers in the restricted problem of three bodies has been developed. The technique combines a multi-conic method of trajectory integration with primer vector theory and an accelerated gradient method of trajectory optimization. A unique feature is that the state transition matrix and the primer vector are found analytical without additional integrations or differentiations. The method has been applied to the determination of optimal two and three impulse transfers between the L2 libration point and circular orbits about both the earth and the moon.

D'Amario, L.↗

Earth tidal amplitude and phase.

During the summer and autumn of 1970 a laser tracking system tracked the Beacon Explorer C spacecraft. The tracking system provided distance measurements to the satellite at a rate of one per second. The satellite is in a near circular orbit at an altitude of about 1000 km with an inclination to the equator of 41 deg. The amplitude and phase lag of the earth and ocean tides have been determined from the tidal perturbations of the satellite.

Smith, D. E.↗

Rendezvous targeting

Revisions to be included in 'Space Shuttle Guidance, Navigation and Control Design Equations' are reported. Technical changes include: (1) a plane change maneuver was incorporated in the program's logic; (2) in the search for an apsidal crossing, program checks were included to update through intervals of pi in the case of near circular orbits or close proximity to an apsidal point; (3) following an astronaut overwrite of a Lambert maneuver, the state vector was updated to establish a new target vector for use in the powered flight routine; and (4) following the computation of each maneuver, the position vector of the primary vehicle was offset - to help compensate for the effects of the finite maneuver - prior to the update of the state vector to the next maneuver point. Input and output variables, detailed flow diagrams a functional flow diagram, and a description of equations are presented.

Tempelman, W. H.↗

CONIC program user's manual

A user's manual for the current CONIC computer program is presented. The program was written in FORTRAN for use on the TRW Time Share system. The CONIC program is used to calculate the relative motion of two bodies in any conic-section orbit (circular, elliptical, parabolic, or hyperbolic). This manual describes the basic equations used for trajectory propagation and defines the input and output parameters of the program. Sample runs with corresponding figures and a detailed flow chart of the program are included.

Source record↗