Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Distribution of the surface potential of epitaxial HgCdTe

We studied the distribution of surface potential of the Hg{sub 1−x}Cd{sub x}Te epitaxial films grown by molecular beam epitaxy. The studies showed that the variation of the spatial distribution of surface potential in the region of the V-defect can be related to the variation of the material composition of epitaxial film. The V-defect is characterized by increased of Hg content with respect to the composition of the solid solution of Hg{sub 1−x}Cd{sub x}Te epitaxial film. In this paper, it was demonstrated that the unformed V-defects can be observed together with the macroscopic V-defects on the epitaxial film surface. These unformed V-defects can allow the creation of a complex surface potential distribution profile due to the redistribution of the solid solution composition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Software-Defined Ultrasonic Communication System Based on Time-reversal Signal Processing

Ultrasonic communication through solid channels suffers from channel dispersion, attenuation, and multipath effect. For example, in elbow shape pipes or complex structures, the elastic waves are reflected and reverberated in multipath resulting in a major dispersion of the signals. In solid channels such as flat bar, multipath propagation is the main reason for bit-wavelet spreading and intersymbol interference (ISI). The conventional modulation method like OOK (on-off-keying) or PSK (phase-shift-keying) fails to provide a useful Signal-to-Noise Ratio (SNR). Time-reversal (TR) signal processing method is a promising technique that can compress the spreading of the bit-wavelet and strengthen the peak signal energy on the receiver. In this study, Finite Element Analysis (FEA) using ABAQUS software tools is used to characterize the bit-wavelet spreading effect caused by dispersive communication channels. Also, this study presents the impact of TR ultrasonic communication as a function of excitation pulse width, channel length, and carrier frequency through a flat-bar channel. A Software-Defined System-on-Chip (SD-SoC) platform is examined as a viable solution for the low-complexity and energy-efficient ultrasonic communication system. The proposed TR based SD-SoC ultrasonic communication system can make full use of signal dispersion for peak performance by minimizing the ISI within a dispersive and reverberant metal channel.

FEM simulation↗

Enabling Parallel Performance and Portability of Solid Mechanics Simulations Across CPU and GPU Architectures

Efficiently simulating solid mechanics is vital across various engineering applications. As constitutive models grow more complex and simulations scale up in size, harnessing the capabilities of modern computer architectures has become essential for achieving timely results. This paper presents advancements in running parallel simulations of solid mechanics on multi-core CPUs and GPUs using a single-code implementation. This portability is made possible by the C++ matrix and array (MATAR) library, which interfaces with the C++ Kokkos library, enabling the selection of fine-grained parallelism backends (e.g., CUDA, HIP, OpenMP, pthreads, etc.) at compile time. MATAR simplifies the transition from Fortran to C++ and Kokkos, making it easier to modernize legacy solid mechanics codes. We applied this approach to modernize a suite of constitutive models and to demonstrate substantial performance improvements across different computer architectures. This paper includes comparative performance studies using multi-core CPUs along with AMD and NVIDIA GPUs. Results are presented using a hypoelastic–plastic model, a crystal plasticity model, and the viscoplastic self-consistent generalized material model (VPSC-GMM). The results underscore the potential of using the MATAR library and modern computer architectures to accelerate solid mechanics simulations.

Morgan, Nathaniel (ORCID:0000000276118449)↗

TESTING OF A FULL-SCALE ROTARY MICROFILTER FOR THE ENHANCED PROCESS FOR RADIONUCLIDES REMOVAL

Savannah River National Laboratory (SRNL) researchers are investigating and developing a rotary microfilter for solid-liquid separation applications in the Department of Energy (DOE) complex. One application involves use in the Enhanced Processes for Radionuclide Removal (EPRR) at the Savannah River Site (SRS). To assess this application, the authors performed rotary filter testing with a full-scale, 25-disk unit manufactured by SpinTek Filtration with 0.5 micron filter media manufactured by Pall Corporation. The filter includes proprietary enhancements by SRNL. The most recent enhancement is replacement of the filter's main shaft seal with a John Crane Type 28LD gas-cooled seal. The feed material was SRS Tank 8F simulated sludge blended with monosodium titanate (MST). Testing examined total insoluble solids concentrations of 0.06 wt % (126 hours of testing) and 5 wt % (82 hours of testing). The following are conclusions from this testing.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis, crystal structure, and magnetic properties of bis(aqua)[μ-(terepthalato-κo,κo´)]copper(II)monohydrate [Cu(C₈O₄)(OH₂)₂]·H₂O

A novel one dimensional Cu(II) coordination polymer [Cu(C₈O₄)(OH₂)₂] ·H₂O 1 has been synthesized and characterized by elemental analysis, IR spectroscopy, X-ray crystal diffraction and magnetic measurements. Single-crystal structural analysis shows that complex 1 consist of 1D Cu(II) chain containing threefold bridging ligands, one (syn–syn) carboxylate and two water molecules. The magnetic study of 1 has been investigated, indicating an overall antiferromagnetic interaction in the complex. - Graphical abstract: The complex [Cu(C₈O₄)(OH₂)₂] ·H₂O was prepared by the reaction of solid copper(II)basic carbonate with an aqueous solution of sodium terephthalate under heating at 50–60 {sup o}C after which it was allowed to crystallize at room temperature. The structure of the complex is distorted octahedral. Magnetic study of the complex reveals antiferromagnetic behaviour. Highlights: • A novel copper(II) coordination polymer with terepthalate dianion was grown in an aqueous solution. • The single crystal growth temperature was 25 °C for period of two weeks. • The magnetic property of the complex was studied using SQUID. • The complex showed antiferromagnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlating the Structural, Electronic, and Explosive Sensitivity Properties of CuII Tetrazine Complexes

The synthesis and characterization of explosive coordination complexes of Cu II with nitrogen-rich tetrazine ligands and nitrate counter-anions have been achieved. The complexes adopt a variety of coordination geometries including monomeric and dimeric architectures with five and six coordinate Cu II centers. The thermal stabilities of the complexes correlate to the strength of the Cu–nitrate interaction such that more strongly bound nitrates exhibit higher thermal stability. Exchanging amine groups on the coordinating ligands with 3,3'- dinitroazetidine groups led to changes in the solid-state structures and increases to the impact sensitivity of the resulting complexes relative to the corresponding amine derivatives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Model Package Report: Composite Analysis Solid Waste Release Model (CASWR Model)

This document describes the implementation of a solid waste form release model in GoldSim for the Hanford Site Composite Analysis (CA) Update. This Composite Analysis Solid Waste Release model (CASWR model) was designed to generate deterministic radionuclide release rates for Hanford’s Central Plateau solid waste disposal sites using single realizations of release model coefficients. Five generalized waste form types are used for the conceptual model of waste release: surplus reactor block, cement, soil-debris, grouted residual waste, and ancillary equipment. The surplus reactor block waste form consists of radionuclide leaching from surplus production graphite reactor core blocks via unspecified processes (White et al., 1984 as cited in PNNL-15965). The cement waste form represents solidified wastes whose permeability is much lower than that of the surrounding soil. The soil-debris waste form type is defined as unconsolidated waste mixed with soil material. Tanks and canyon complexes comprise the grouted residual waste form such that their solid waste will be grouted and capped with a surface barrier at the completion of their cleanup. Finally, the ancillary equipment waste form constitutes contaminant releases from ancillary and auxiliary waste form residues associated with tank farms at closure. Individual sub-models are implemented to numerically represent a respective waste form within the CASWR Model: Surplus Reactor Block Sub-model, Cement Sub-model, SoilDebris Sub-model, Grouted Residual Waste Sub-model, and Ancillary Equipment Submodel. Advection is assumed to be the primary transport process governing the release of radionuclides in the Ancillary Equipment and Soil-Debris Sub-models. Diffusion is assumed to be the primary release process in the Grouted Residual Waste and Cement Sub-models. An unspecified zero-order release process is considered in the Surplus Reactor Block Sub-model due to the lack of information regarding actual processes involved in irradiated graphite leaching. The Surplus Reactor Block, Cement, and SoilDebris Sub-models were compared against analytical solutions (PNNL-11800, Composite Analysis for Low-Level Waste Disposal in the 200 Area Plateau of the Hanford Site). The agreement between results of these analytical solutions and the corresponding waste form models verified their correct implementation in GoldSim. A 1-D modeling abstraction approach for the Grouted Residual Waste and Ancillary Equipment Sub-models was adopted from existing Performance Assessment (PA) models. Despite the simplifications made in these sub-models, they were found to be appropriate representations of the waste forms, similar to what was used in the Waste Management Area C PA model (RPP-ENV-58782, Performance Assessment of Waste Management Area C, Hanford Site, Washington, Rev. 0). A sensitivity analysis was conducted to identify the most influential parameters in each waste form sub-model. Suggestions for considering pH-dependent and redox-dependent release mechanisms are formulated through the development of a conditional constant approach in GoldSim.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Systems and methods for rapid processing and storage of data

Systems and methods of building massively parallel computing systems using low power computing complexes in accordance with embodiments of the invention are disclosed. A massively parallel computing system in accordance with one embodiment of the invention includes at least one Solid State Blade configured to communicate via a high performance network fabric. In addition, each Solid State Blade includes a processor configured to communicate with a plurality of low power computing complexes interconnected by a router, and each low power computing complex includes at least one general processing core, an accelerator, an I/O interface, and cache memory and is configured to communicate with non-volatile solid state memory.

97 MATHEMATICS AND COMPUTING↗

Systems and methods for rapid processing and storage of data

Systems and methods of building massively parallel computing systems using low power computing complexes in accordance with embodiments of the invention are disclosed. A massively parallel computing system in accordance with one embodiment of the invention includes at least one Solid State Blade configured to communicate via a high performance network fabric. In addition, each Solid State Blade includes a processor configured to communicate with a plurality of low power computing complexes interconnected by a router, and each low power computing complex includes at least one general processing core, an accelerator, an I/O interface, and cache memory and is configured to communicate with non-volatile solid state memory.

Stalzer, Mark A.↗

Systems and methods for rapid processing and storage of data

Systems and methods of building massively parallel computing systems using low power computing complexes in accordance with embodiments of the invention are disclosed. A massively parallel computing system in accordance with one embodiment of the invention includes at least one Solid State Blade configured to communicate via a high performance network fabric. In addition, each Solid State Blade includes a processor configured to communicate with a plurality of low power computing complexes interconnected by a router, and each low power computing complex includes at least one general processing core, an accelerator, an I/O interface, and cache memory and is configured to communicate with non-volatile solid state memory.

Stalzer, Mark A.↗

Solution and Solid State Structural Chemistry of Th(IV) and U(IV) 4-Hydroxybenzoates

Organic ligands with carboxylate functionalities have been shown to affect the solubility, speciation, and overall chemical behavior of tetravalent metal ions. While many reports have focused on actinide complexation by relatively simple monocarboxylates such as amino acids, here we examined Th(IV) and U(IV) complexation by 4-hydroxybenzoic acid in water with the aim of understanding the impact that the organic backbone has on the solution and solid state structural chemistry of thorium(IV) and uranium(IV) complexes. Two compounds of the general formula [An 6 O 4 (OH) 4 (H 2 O) 6 (4-HB) 12 ]· n H 2 O [An = Th ( Th-1 ) and U ( U-1 ); 4-HB = 4-hydroxybenzoate] were synthesized via roomtemperature reactions of AnCl 4 and 4-hydroxybenzoic acid in water. Solid state structures were determined by single-crystal X-ray diffraction, and the compounds were further characterized by Raman, infrared, and optical spectroscopies and thermogravimetry. The magnetism of U-1 was also examined. The structures of the Th and U compounds are isomorphous and are built from ligand-decorated oxo/hydroxo-bridged hexanuclear units. The relationship between the building units observed in the solid state structure of U-1 and those that exist in solution prior to crystallization as well as upon dissolution of U-1 in nonaqueous solvents was investigated using small-angle X-ray scattering, ultraviolet-visible optical spectroscopy, and dynamic light scattering. The evolution of U solution speciation as a function of reaction time and temperature was examined. Such effects as well as the impact of the ligand on the formation and evolution of hexanuclear U(IV) clusters to UO 2 nanoparticles compared to prior reported monocarboxylate ligand systems are discussed. Unlike prior reported syntheses of Th and U(IV) hexamers where the pH was adjusted to ~2 and 3, respectively, to drive hydrolysis, hexamer formation with the HB ligand appears to be promoted only by the ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trinuclear gold chains and octanuclear copper gyrobifastigia stabilized using a fluorinated pyridyl ligand

The fluorinated pyridyl ligand [6-(CF 3 )-2-Py] − with gold( I ) affords trinuclear Au 3 assemblies that further organize into a supramolecular helical column through aurophilic interactions. Its chemistry with copper( I ) is even more remarkable, leading to an unprecedented octanuclear copper–pyridyl cluster complex featuring a central Cu 8 core with an approximate gyrobifastigium geometry. Solid powders of compounds {(6-(CF 3 )-2-Py)Au} 3 and {(6-(CF 3 )-2-Py)Cu} 8 exhibit intense photoluminescence at room temperature, displaying green and yellow colors to the naked eye, respectively. Here, the octanuclear copper complex is also an effective catalyst for azide–alkyne cycloaddition, producing triazoles. Detailed computational analyses confirm the preference for experimental geometries and provide insights into the observed luminescence.

Phan, Vo Quang Huy [University of Texas at Arlingt↗

Quantitative mineralogical composition of complex mineral wastes - Contribution of the Rietveld method

The objective of the work presented in this paper is the quantitative determination of the mineral composition of two complex mineral wastes: a sewage sludge ash (SSA) and a municipal solid waste incineration fly ash (MSWIFA). The mineral compositions were determined by two different methods: the first based on calculation using the qualitative mineralogical composition of the waste combined with physicochemical analyses; the second the Rietveld method, which uses only X-ray diffraction patterns. The results obtained are coherent, showing that it is possible to quantify the mineral compositions of complex mineral waste with such methods. The apparent simplicity of the Rietveld method (due principally to the availability of software packages implementing the method) facilitates its use. However, care should be taken since the crystal structure analysis based on powder diffraction data needs experience and a thorough understanding of crystallography. So the use of another, complementary, method such as the first one used in this study, may sometimes be needed to confirm the results.

36 MATERIALS SCIENCE↗

Crystal chemistry in the Ag{sub 2}O-Nb{sub 2}O{sub 5} system

The investigation of the AgNbO{sub 3}-Nb{sub 2}O{sub 5} system is carried out using solid-state routes. This investigation allows to confirm the existence of four compounds with structure related to the Na-based homologous. A new form of AgNb{sub 3}O{sub 8} is evidenced and its structure is determined on the basis of single-crystal X-ray diffraction investigations. This compound crystallizes in the orthorhombic system (SG Pbam) with cell parameters a=12.453(4) A; b=12.416(1) A; c=3.9700(4) A. It presents a TTB type host network in which triangular tunnels remain empty, square ones are fully filled with Ag{sup +} and pentagonal ones show mixed occupancy with Ag{sup +} and [NbO]{sup 3+} entities. Crystal-chemistry investigations show that despite a complex and more or less disordered structure, no evidence for solid solution domain is observed. - Graphical abstract: The investigation via conventional solid-state route allows to settle the different compounds of the AgNbO{sub 3}-Nb{sub 2}O{sub 5} system. The structure of a new form of AgNb{sub 3}O{sub 8} is detailed. It is related to the TTB type network with a specific mixed Ag/Nb occupancy of pentagonal tunnel driving to possible but not observed ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

RESOLVING THE ELECTROCHEMICAL EQUATIONS OF A SOLID OXIDE FUEL CELL FOR USE IN TRANSIENT SIMULATION AND INTEGRATION INTO CYBER-PHYSICAL SYSTEMS

A major challenge with complex cyber-physical systems stems from long model computational time that creates a mismatch between the model system and the physical system. The numerical modeling of solid oxide fuel cells (SOFCs) presents particular challenges due to the highly coupled nature of the underlying equations and the multiphysics needed to fully resolve their behavior during a transient event. To this end current approaches revolve around splitting the computational efforts into resolving temperature effects and resolving electrochemical effects. Current methods employed for the transient simulation of an SOFC for implementation in the Hybrid Performance (HyPer) facility cyberphysical plant at the National Energy Technology Laboratory reveal a distinct need for accelerated results with a high degree of stability. To this aim, an investigation into the computational time for the code reveals that the underlying electrochemical algorithm takes an order of magnitude more time than its thermal counterpart and has a tendency to vary in terms of iteration time and as such a rework of the underlying system is proposed. The primary method for accelerated electrochemical algorithm solutions is to employ higher order root finding recipes for the resolution of the highly coupled electrochemical equations. This is done with the intention to reduce the overall number of subiterations necessary for resolving voltage, current density, and species concentration, properties of the fuel cell that are all directly coupled and require nested iterative approaches. The overall objective of this approach is an order of magnitude reduction in calculation time without sacrificing stability and increasing accuracy. Specific approaches involve using both bounded and unbounded techniques, such as the False Position method and the Secant method (or if applicable Newton-Raphson) respectively, the drawbacks being slower convergence for False Position and instability for the Secant or Newton-Raphson methods. Current preliminary results on simplified versions of the parent functions involved for electrochemical calculations indicate a reduction in computational steps by a factor of two for the secant method and a factor of three for Newton-Raphson. When implemented into new modified electrochemical algorithms, the results indicate a possible order of magnitude reduction in calculation time.

Arias, Jesus↗

Influence of Hydrophobicity on Polyelectrolyte Complexation

Polyelectrolyte complexes are a fascinating class of soft materials that can span the full spectrum of mechanical properties from low-viscosity fluids to glassy solids. This spectrum can be accessed by modulating the extent of electrostatic association in these complexes. However, to realize the full potential of polyelectrolyte complexes as functional materials, their molecular level details need to be clearly correlated with their mechanical response. The present work demonstrates that by making simple amendments to the chain architecture, it is possible to affect the salt responsiveness of polyelectrolyte complexes in a systematic manner. This is achieved by quaternizing poly(4-vinylpyridine) (QVP) with methyl, ethyl, and propyl substituents—thereby increasing the hydrophobicity with increasing side chain length—and complexing them with a common anionic polyelectrolyte, poly(styrenesulfonate). The mechanical behavior of these complexes is compared to the more hydrophilic system of poly(styrenesulfonate) and poly(diallyldimethylammonium) by quantifying the swelling behavior in response to salt stimuli. More hydrophobic complexes are found to be more resistant to doping by salt, yet the mechanical properties of the complex remain contingent on the overall swelling ratio of the complex itself, following near universal swelling–modulus master curves that are quantified in this work. Furthermore, the rheological behaviors of QVP complex coacervates are found to be approximately the same, only requiring higher salt concentrations to overcome strong hydrophobic interactions, demonstrating that hydrophobicity can be used as an important parameter for tuning the stability of polyelectrolyte complexes in general, while still preserving the ability to be processed “saloplastically”.

36 MATERIALS SCIENCE↗

Heating and cooling of ligand-coated colloidal nanocrystals in solid films and solvent matrices

Ligand-to-nanocrystal heating and subsequent cooling to the environmental medium is investigated with infrared pump, electronic probe (IPEP) spectroscopy. Compared to solid films, solvated nanocrystals show faster ligand-to-nanocrystal heat equilibration (c. 11 ps versus c. 17 ps). Solvated nanocrystals also display more cooling of the hot ligand–nanocrystal complex on the experimentally measured time-scale, emphasizing the thermally insulating nature of semiconductor nanocrystal solids. Although heating transfer rates among solvents are all between 150 ps and 330 ps, cooling of the nanocrystal–ligand complex is slower, on average, in chlorinated solvents (c. 315 ps) compared to deuterated hydrocarbon solvents (c. 215 ps). Differences between chlorinated and hydrocarbon solvents show the importance of matching the vibrational energies of the solvent and the ligands for increasing the rate of heat transfer. Increases in the cooling time for poorer hydrocarbon solvents, in which nanocrystals aggregated, such as toluene, compared to better solvents, like methylcyclohexane, indicate that penetration of solvent into the ligand layer facilitates improved heat transfer to the matrix.

36 MATERIALS SCIENCE↗

Multiple oxidation states of uranium stabilized by an O , N , O -ligand

Elements of the 5f row maintain a wide variety of oxidation states that have been exploited in synthesis, catalysis, and separations. Herein, we describe the complexation of an O,N,O chelator, ExPh, with uranium in the (IV) and (VI) (uranyl) oxidation states. These two uranium complexes, U(IV)ExPh and UO 2 ExPh, respectively, were characterized in the solid state via single-crystal X-ray diffraction (SC-XRD) analysis. Electrochemical studies using cyclic voltammetry were employed to investigate the multiple redox events associated with the U(IV) complex. Spectro-electrochemical analysis of U(IV)ExPh provided spectroscopic evidence of a stable U(V) species. Chemical oxidation of U(IV)ExPh allowed isolation of the U(V) complex, U(V)ExPh. All three stable uranium complexes produced in this study were characterized via IR, UV-vis and NMR spectroscopies, and micro-spectrophotometry. On the other hand, efforts to reduce U(IV)ExPh to the corresponding U(III) species or produce this putative complex directly from ExPh failed to yield an isolable product. The stabilization of three formal oxidation states of uranium, coupled with previous lanthanide-row results, paves the way for studies of ExPh and its analogues in minor actinide chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗